ReferenceDesignLibrary

Designs (177)

177 Results - Page 1/18 |< < 1 2 3 4 5 > >|

UCC28063EVM-723: 300W PFC, 390V, 85~265V in

Manufacturer: Texas Instruments

The UCC28063 is a dual-phase, transition-mode Power Factor Correction (PFC) pre-regulator. The UCC28063EVM-723 is an evaluation module (EVM) with a 390-V, 300-W, dc output that operates from a universal input of 85 VRMS to 265 VRMS and provides power-factor correction.

View Design

MCP73833EV: Li-Ion Li-Pol, 1A, Battery Charger

Manufacturer: Microchip Technology

The MCP73833 Li-Ion Battery Charger Evaluation Board is an evaluation and demonstration tool for Microchip’s MCP73833/4 Stand-Alone Linear Li-Ion/Li-Polymer Charge Management Controllers. The evaluation board has two circuits provided with one circuit fully assembled and tested.

View Design

TPS2066CDGNEVM-015: 1A, 4.5 ~ 5.5 Vin, Power Dist Switch

Manufacturer: Texas Instruments

The TPS20xxCDRCEVM-016 and TPS20xxCDGNEVM-015 are evaluation modules (EVM) for the Texas Instruments family of dual-channel, current-limited, power distribution switches.

View Design

EVL6562A-35WFLB: 35W PFC, 48V, 90 ~ 265 VAC

Manufacturer: STMicroelectronics

The board is a 35 W, wide-range mains input, power factor corrected SMPS (switched mode power supply) suitable for all low power applications requiring a high PF (power factor), such as lighting applications and power supplies for LEDs. The low-cost L6562A and the simple flyback topology combine to provide a very competitive PFC controller solution.

View Design

EVAL4981A: 360W @ 400V, 88 ~ 264 VAC

Manufacturer: STMicroelectronics

The L4981 integrated circuit is a continous mode average current controller with several specific functions for active power factor correction. It can operate in high quality, medium/high power conversion range and provides all the necessary features to achieve a very high power factor, up to 0.99. Thanks to the BCD technology used, operative switching frequency higher than 200kHz can be used.

View Design

EPC9054: 1A, Wireless Power Amp, 0 ~ 40V, ~ 60V, ~ 80V

Manufacturer: EPC

The EPC9054 is a high efficiency, differential mode Class-E amplifier development board that can operate up to 15 MHz.

View Design

TPS2543EVM-064: USB 4.5 - 5.5 Vin, 2.5 A Switch

Manufacturer: Texas Instruments

The Texas Instruments TPS2543EVM-064 evaluation module (EVM) helps designers evaluate the performance of the TPS2543 USB Charging Port Power Switch and Controller. The EVM contains input and output connectors. Jumper controls are also provided to ease evaluation of device features.

View Design

EPC9001: 15A @ 0 ~ 40V, Half Bridge

Manufacturer: EPC

The EPC9001 development board is a 40 V maximum device voltage, 15 A maximum output current, half bridge with onboard gate drives

View Design

DC1621A: 2 Cell, 7.2V, 2A Max, LiFePO4

Manufacturer: Linear Technology/Analog Devices

Demonstration circuit 1621A features the LTM®8062, a 32V, 2A μModule® power tracking battery charger. The demonstration circuit is designed to operate from a 9.75V to 32V input source, and to charge a 2-cell battery pack to a float voltage of 7.2V.

View Design

DC1645A-C: 2 Cell, 8.2V, 2A Max, Li-Ion/LiPo

Manufacturer: Linear Technology/Analog Devices

Demonstration circuits 1645A-A, 1645A-B, 1645A-C and 1645A-D feature the LTM8061, a 32V, 2A μModule® Li-Ion battery charger. Operating from a 6.5V to 32V input source, the 1645A-A and 1645A-B demo circuits charge single cell Li-Ion batteries to float voltages of 4.1V or 4.2V respectively.

View Design
177 Results - Page 1/18 |< < 1 2 3 4 5 > >|