Texas Instruments

TPS22992 6 A Load Switch

Texas Instruments' single-channel switch features adjustable rise time and adjustable quick output discharge (QOD)

Image of Texas Instruments' TPS22992 6 A Load SwitchTexas Instruments' TPS22992 is a single-channel load switch with an 8.7 mΩ power MOSFET that is designed to maximize power density in applications up to 5.5 V and 6 A. A configurable rise-time provides flexibility for power sequencing and minimizes inrush current for high capacitance loads. The switch is controlled by an enable-pin (ON) which is capable of interfacing directly with low-voltage GPIO signals (VIH = 0.8 V).

The TPS22992 has an optional QOD pin for when the switch is turned off and the fall-time (tFALL) of the output can be adjusted through an external resistor. The Power-Good (PG) signal on the device indicates when the main MOSFET is fully turned on, which can enable a downstream load.

The device comes with thermal shutdown to ensure protection in high temperature environments. The TPS22992S integrates overcurrent protection, preventing damage to the device if the output is shorted to ground during operation or startup. For small form-factor applications, a 1.25 mm x 1.25 mm, 0.4 mm pitch 8-pin WQFN package is available. A wider 0.5 mm pitch package version (TPS22992 only) is also available. The device provides operation over the free-air temperature range of -40°C to +125°C.

Features
  • Operating input voltage range (VIN):
    • TPS22992: 0.1 V to 5.5 V
    • TPS22992S: 1 V to 5.5 V
  • Bias voltage supply (VBIAS): 1.5 V to 5.5 V
  • Continuous current: 6 A (max.)
  • On-resistance (RON): 8.7 mΩ (typ.)
  • Adjustable slew rate control
  • Adjustable QOD
  • Open-drain PG signal
  • Low power consumption:
    • TPS22992: ON-state (IQ): 10 µA (typ.)
    • TPS22992S: ON-state (IQ): 30 µA (typ.)
    • OFF-state (ISD): 0.1 µA (typ.)
  • Short-circuit protection (TPS22992S only)
  • Thermal shutdown
  • Smart ON pin pulldown (RPD,ON):
    • ON ≥ VIH (ION): 25 nA (typ.)
    • ON ≤ VIL (RPD,ON): 500 kΩ (typ.)
Applications
  • Data storage
  • PCs and notebooks
  • Industrial PCs
  • Optical modules

TPS22992 6 A Load Switches

ImageManufacturer Part NumberDescriptionVoltage - LoadAvailable QuantityView Details
5.5-V, 6-A, 10-M LOAD SWITCH WITTPS22992SRXNR5.5-V, 6-A, 10-M LOAD SWITCH WIT1V ~ 5.5V0View Details
5.5-V, 6-A, 10-M LOAD SWITCH WITTPS22992RXPR5.5-V, 6-A, 10-M LOAD SWITCH WIT0.1V ~ 5.5V0View Details

Evaluation Boards

ImageManufacturer Part NumberDescriptionUtilized IC / PartAvailable QuantityView Details
EVAL BOARD FOR TPS22992TPS22992EVMEVAL BOARD FOR TPS22992TPS229929 - ImmediateView Details
EVAL BOARD FOR TPS22992STPS22992SEVMEVAL BOARD FOR TPS22992STPS22992S0View Details
Published: 2022-02-11

Related Product Highlight

Logic Solutions Texas Instruments wide array of digital and analog components target all applications from wearables to automated factory equipment - In stock at Digi-Key
Power Management TI’s your ultimate power resource, carrying industry-leading power management solutions to ensure a product to fit your design.
TMAG5123 High-Voltage In-Plane High-Precision Switch Texas Instruments' TMAG5123 high-voltage high-precision switch is designed for magnetic-field sensing applications.

Related Articles

Challenges and Solutions for LED Backlighting Design There are many possibilities for backlighting liquid crystal display panels, including incandescent, electroluminescence, fluorescence, LEDs, and woven fiber optics.
Power Supply and Topology Solutions for Driving LED Arrays A look at power supply and topology solutions including the issues, options and trade-offs for driving LED arrays.
New Components Call for a Hardware Comparison of Receiver Architectures Superheterodyne comparison to direct conversion radio architecture including a discussion of the advantages of each.