fido5100/fido5200 Real-Time Ethernet Switches

Analog Devices’ Ethernet switches for process control and industrial automation

Image of Analog Devices' fido5100 and fido5200 Ethernet SwitchesADI’s fido5100 and fido5200 are programmable Ethernet switches that support IEEE 802.3 10 Mbps/100 Mbps Ethernet internet protocol version 6 (IPv6) and internet protocol version 4 (IPv4). The switches are personalized to support the desired protocol by firmware that is downloaded from a host processor. The firmware is contained in the real-time Ethernet multiprotocol (REM) switch driver and is downloaded at power-up. The REM switch can be ready for network data operation in less than 4 ms to support fast startup and quick connect type network functionality. The fido5100 and fido5200 devices have the same signal assignments as defined in the data sheet. The fido5100 supports the following protocols: PROFINET real time (RT) and isochronous real time (IRT), Ethernet/IP with and without device level ring (DLR), Modbus TCP, SERCOS III, and POWERLINK. The fido5200 supports all protocols that the fido5100 does plus EtherCAT. The REM switch is intended for use with a host processor. Network operation is handled using the functions and services provided in the REM switch driver. The host processor can implement any protocol stack by integrating it with the REM switch driver. The fido5100 and fido5200 REM switches have an operating temperature range of -40°C to +85°C and they come in a 144-ball chip scale package ball grid array (LFBGA, CSPBGA) package. The fido5100 and fido5200 are ideal for managed Ethernet switches, process controls, and industrial automation.

Image of ADI's Fido5100/Fido5200 Application Chart

Features
  • Standards: IEEE 802.3, 10/100 Base-T/TX PHY
  • IEEE 802.3, 10 Mbps/100 Mbps, half and full duplex, IPv6 and IPv4 communication
  • Support for all industrial protocols
    • PROFINET Class B and Class C with fast startup (version 2.3)
    • Ethernet/IP with QuickConnect, CIP Sync, and CIP Motion
    • Modbus TCP
    • SERCOS III
    • Ethernet POWERLINK
  • Two independent Ethernet ports: 1 MII and 1 RMII interface per port 
  • Host interface transfer rate: 32 bits per 28 ns
  • Supports EtherCAT cycle times down to 12.5 μs and PROFINET cycle times down to 31.25 μ
  • Interface: MII, RMII
  • Voltage supply: 1.2 V, 3.3 V
  • Temperature operating range: -40°C to +85°C
  • Package/case: 144-LFBGA, CSPBGA
Applications
   
  • Managed Ethernet switches
  • Process controls
 
  • Industrial automation

fido5100/fido5200 Ethernet Switches

ImageManufacturer Part NumberDescriptionAvailable QuantityView Details
FIDO5200BBCZ datasheet linkIC ETHERNET SWITCH BGA-144FIDO5200BBCZIC ETHERNET SWITCH BGA-144931 - Immediate
16647 - Factory Stock
FIDO5200BBCZ product page link
FIDO5100BBCZ datasheet linkIC ETHERNET SWITCH BGA-144FIDO5100BBCZIC ETHERNET SWITCH BGA-14456 - Immediate
13241 - Factory Stock
FIDO5100BBCZ product page link
English  |  Español
Published: 2018-02-08