ReferenceDesignLibrary

Refine Search

Eval Board Purpose Range Sensing Method Voltage In Features Design Author Component Count + Extras
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear All Selections Apply Filters

Designs (8)

8 Results - Page 1/1

TIDA-00754: Smart lighting & backlight control by ambient light & noise-immune proximity sensor

Manufacturer: Texas Instruments

The TIDA-00754 TI Design demonstrates a proximity sensor implementation for HMI applications. The design can be used for backlight control that dynamically adjusts LCD backlight brightness relative to the environment's ambient light levels.

View Design

OPT3002EVM: 300 ~ 1000nm Ambient Light Sensor, 1.6 ~ 3.6V in

Manufacturer: Texas Instruments

The OPT3002 is an ambient light sensor (ALS) with a digital output integrated circuit.

View Design

TIDA-01386: Ultrasonic Distance Sensor with IO-Link

Manufacturer: Texas Instruments

This reference design features an ultrasonic distance sensor that fits in a M12 housing due to its high integration and an optimized layout. The design offers an IO-Link interface to communicate with the system control, which makes it industry 4.0 ready.

View Design

TIDA-01519: Fire & Carbon Monoxide Alarm Detector Reference Design with Low BOM Cost

Manufacturer: Texas Instruments

TIDA-01519 reference design offers a smart enivromental sensor and home automation solution for sensor to cloud applications

View Design

TIDA-01469: Motor Monitoring Using Wireless Vibration Sensor Reference Design

Manufacturer: Texas Instruments

This reference design is a low-power wireless subsystem solution that monitors motors using vibration sensing to determine if preventative maintenance is necessary. The low power usage and wireless capabilities of this subsystem solution enables it to run on a single coin cell battery, which allows for the device to be small, inexpensive and placed in difficult-to-reach locations.

View Design

MSP430-PIR: Low Power Smart PIR Sensor

Manufacturer: Texas Instruments

Application note SLAA283 from Texas Instruments was used to create MSP430-PIR, there are a few differences between the TI schematic and ours - our schematic support both the TI and the OLIMEX SBW JTAG layout; we ship the boards with SMT jumpers which are shortened for the OLIMEX JTAG layout so if you use the TI JTAG, you should move the jumpers to TI positionMSP430-PIR board use ultralow-power mi…

View Design

EVAL-CN0357-PMDZ: 0 ~ 2000ppm CO Detector, 3.3V in

Manufacturer: Analog Devices Inc.

The circuit shown in Figure 1 is a single-supply, low noise, portable gas detector, using an electrochemical sensor. The Alphasense CO-AX carbon monoxide sensor is used in this example.

View Design

EVAL-CN0357-ARDZ: Electrochemical Gas Detection, Arduino Compatible

Manufacturer: Analog Devices Inc.

The circuit shown on EVAL-CN0357-ARDZ is a single-supply, low noise, portable gas detector, using an electrochemical sensor.

View Design
8 Results - Page 1/1