ReferenceDesignLibrary

Refine Search

Eval Board Cell Type Configuration Voltage In Voltage Out Current Out Features Quiescent Current [Typical] Sleep Mode Current [Typical] Component Count + Extras Application / Target Market Design Author
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear All Selections Apply Filters

Designs (11)

11 Results - Page 1/2 |< < 1 2 > >|

BQ24100EVM: 1 Cell Li-Ion/Li-Pol @ 1.3A

Manufacturer: Texas Instruments

The bqSWITCHER series are highly integrated Li-Ion and Li-Pol switch-mode charge management devices targeted at a wide range of portable applications. The bqSWITCHER series offer integrated synchronous PWM Controller and PowerFETs, high-accuracy current and voltage regulation, charge conditioning, charge status, and charge termination, in a small thermally enhanced QFN package. The system-control…

View Design

SM3320-BATT-EV(#1): 12V, 9A Solar Charger, 15~45Vin

Manufacturer: Texas Instruments

The SolarMagic™ SM72442 MPPT digital controller and SM72295 photovoltaic full bridge drivers are designed to control high efficiency DC/DC conversion used in photovoltaic applications. This application note will detail the usage of those devices in a battery charging application.

View Design

PMP7390(#2): 5V @ 4.2A, Dual USB @ 2.1A, 12V in

Manufacturer: Texas Instruments

Using the TPS40170 PWM Buck Controller, this power management reference design provides a regulated 5V to power 2 USB ports at 2.1A each (total 4.2A) in a small form-factor. The design has been optimized for a nominal 12V input and accepts 8-60V with TPS40170.

View Design

PMP11114.2: USB Type C, 3A & 1.5A Charger, 7 ~ 18V in

Manufacturer: Texas Instruments

PMP11114 is a dual port USB Type C Charger. This design takes an automotive input voltage (7V to 18V nominal, load dump to 40V). The output goes to two USB Type ports, each of these ports supplies 5V. The design supports 3A on one port and 1.5A on the other port. The DC/DC portion of the design is rated for 5A total current. The design is fully compliant with USB type C and backwards complian…

View Design

SM3320-RF-EV(#1): 12.5Aout, 0 ~ 43V Out, RF

Manufacturer: Texas Instruments

The SolarMagic™ SM3320-RF-EV reference design integrates a power optimizer and a low-cost 2.4GHz radio to add a remote shutdown feature to a PV system. The remote shutdown feature can be used during installation, maintenance, or emergency situations to de-energize the PV system.

View Design

BQ77915EVM-014: 3 to 5-Series Li-Ion Series Charger With Autonomous Cell Balancing

Manufacturer: Texas Instruments

The BQ77915EVM-014 evaluation module (EVM) is a complete evaluation system for the bq77915 3-series to 5-series low-power protector for lithium-ion cells. The EVM includes one bq77915 and FETs to control current in a configuration typical for switching current in a lithium-ion battery pack.

View Design

BQ24103EVM: 1 or 2 Cell Li-Ion/Li-Pol @ 1.3A

Manufacturer: Texas Instruments

The bqSWITCHER series are highly integrated Li-Ion and Li-Pol switch-mode charge management devices targeted at a wide range of portable applications. The bqSWITCHER series offer integrated synchronous PWM Controller and PowerFETs, high-accuracy current and voltage regulation, charge conditioning, charge status, and charge termination, in a small thermally enhanced QFN package. The system-control…

View Design

BQ24004EVM: 2 Cell Li-Ion/Li-Pol Charger, 1A

Manufacturer: Texas Instruments

The bq24004/5/6 series ICs are advanced Li-Ion linear charge management devices for highly integrated and space-limited applications. They combine high-accuracy current and voltage regulation; FET pass-transistor and reverse-blocking Schottky; battery conditioning, temperature, or input-power monitoring; charge termination; charge-status indication; and charge timer in a small, 20-lead TSSOP Powe…

View Design

BQ24103AEVM: 1 or 2 Cell Li-Ion/Li-Pol @ 1.3A

Manufacturer: Texas Instruments

The bqSWITCHER series are highly integrated Li-Ion and Li-Pol switch-mode charge management devices targeted at a wide range of portable applications. The bqSWITCHER series offer integrated synchronous PWM Controller and PowerFETs, high-accuracy current and voltage regulation, charge conditioning, charge status, and charge termination, in a small thermally enhanced QFN package. The system-control…

View Design

DC2043B: 4 in Series Lead Acid Balancer, 4 ~ 16V in

Manufacturer: Linear Technology/Analog Devices

Demonstration circuit 2043B is a lead-acid battery balancer featuring the LTC®3305. The LTC3305 balances up to four lead-acid batteries connected in series and incorporates all voltage monitoring, gate drive and fault detection circuitry.

View Design
11 Results - Page 1/2 |< < 1 2 > >|