TMC5130-EVAL: BiPolar Stepper, 1.4A @ 4.75 ~ 46V


The TMC5130-EVAL allows you to explore all functions of the TMC5130A-TA.

The TMC5130-EVAL-KIT is a set of one MCU board Landungsbrücke, an Eselsbrücke bridge board and one TMC5130-EVAL driver board. It allows for a quick and simple start within only minutes to make your motor turning, while still providing full access to all registers and full functionality and diagnostics.

For diagnosis, all signals between MCU and TMC5130 are accessible with probes on the Eselsbrücke bridge board. To simplify the transfer to your own processor platform the MCU board can be disconnected.

Additionally required is a Power Supply (max. 46V)


Manufacturer Trinamic Motion Control GmbH
Category Motor Control
Eval Board Part Number 1460-1152-ND
Eval Board Supplier Trinamic Motion Control GmbH
Eval Board Normally In Stock
Voltage In 4.75 ~ 46 V
Number of Motors and Type 1, Stepper Motor, BiPolar
Power / Current Out 1.4 A
Features GUI / Design Software
Over Current Protection
Short Circuit Protection
SPI Interface
Stall Detection
Thermal Protection
UART Interface
Under Voltage Protection, Brown-Out
Component Count + Extras 60 + 0
Application / Target Market 3D Printer
Printer, Plotter
Textile machinery
Design Author TRINAMIC
Main I.C. Base Part TMC5130

Share This Design

Eval Board

Order a fully assembled board:

Quantity Available: 24