USD

LM3429BKBSTEVAL: 1A @ 28V Max, 10 ~ 70V in

Summary

This wide range evaluation board showcases the LM3429 NFET controller used with a buck-boost current regulator. It is designed to drive 4 to 8 LEDs at a maximum average LED current of 1A from a DC input voltage of 10 to 70V.

The evaluation board showcases most features of the LM3429 including PWM dimming, overvoltage protection and input under-voltage lockout. It also has a right angle connector (J7) which can mate with an external LED load board allowing for the LEDs to be mounted close to the driver. Alternatively, the LED+ and LED- banana jacks can be used to connect the LED load.

The buck-boost circuit can be easily redesigned for different specifications by changing only a few components (see the Alternate Designs section found at the end of this application note).

Specifications

Manufacturer Texas Instruments
Category Lighting
Sub-Category LED Drivers - DC In
Eval Board Part Number 296-LM3429BKBSTEVAL/NOPB-ND
Eval Board Supplier Texas Instruments
Eval Board Normally In Stock
Voltage In 10 ~ 70 V
Topology Step Up/Down
Current Out 1 A
Voltage Out (Max) 28 V
Outputs and Type 1 Non-Isolated
Efficiency @ Conditions >88%, 14 ~ 28V in, 6 LEDs @ 1 A
>79%, 10 ~ 70V in, 6 LEDs @ 1 A
Features Dimming Control
Over Voltage Protection
Thermal Protection
Under Voltage Protection, Brown-Out
Switching Frequency 700 kHz
Component Count + Extras 34 + 12
Design Author Texas Instruments
Application / Target Market Automotive
LED Home Lighting
LED Signage
Main I.C. Base Part LM3429
Date Created By Author
Date Added To Library 2011-03

Share This Design

Eval Board

Order a fully assembled board:

Quantity Available: 1

Quantity:

Media