ReferenceDesignLibrary

Designs (471)

471 Results - Page 1/48 |< < 1 2 3 4 5 > >|

LM3407EVAL: 350mA @ 24.5V Max, 22 ~ 30V in

Manufacturer: Texas Instruments

The LM3407 evaluation board contains a Pulse-Width-Modulation (PWM) floating buck converter with an integrated N-Channel power MOSFET and is designed to provide a constant current output for driving 350mA LEDs.

View Design

LP3943ISQEV: 16 LED @ 25mA, 200mA Total

Manufacturer: Texas Instruments

LP3943 is an integrated device capable of independently driving 16 LEDs. This device also contains an internal precision oscillator that provides all the necessary timing required for driving each LED.

View Design

ADS1118EVM: K-Type Thermocouple to SPI Interface

Manufacturer: Texas Instruments

The ADS1118 is a precision ADC. It features onboard reference and oscillator, as well as 16 bits of resolution. The ADS1118 can perform up to 860 samples per second (SPS) and has an onboard programmable gain amplifier (PGA) that allows input ranges from ±256 mV to ±6.144 V. It also contains an input multiplexer that allows each input to be used with reference to ground, or two differential inputs…

View Design

TPA6120A2EVM: High Fidelity Head Phone Amp

Manufacturer: Texas Instruments

The TPA6120A2 is a high fidelity audio amplifier built on a current-feedback architecture. This high bandwidth, extremely low noise device is ideal for high performance equipment. The better than 120 dB of dynamic range exceeds the capabilities of the human ear, ensuring that nothing audible is lost due to the amplifier. The solid design and performance of the TPA6120A2 ensures that music, not th…

View Design

SN65LVPE502CPEVM: USB 3.0 Redriver EVM

Manufacturer: Texas Instruments

The SN65LVPE502CP is a dual channel, single lane USB 3.0 re-driver and signal conditioner supporting data rates of 5.0 Gbps. The device complies with USB 3.0 spec revision 1.0, supporting electrical idle condition and low frequency periodic signals (LFPS) for USB 3.0 power management modes.

View Design

DRV2624EVM-MINI: LRA/ERM Haptic Driver, 2.7 ~ 5.5V in

Manufacturer: Texas Instruments

The DRV2624 device is a haptic driver that relies on a proprietary closed-loop architecture to deliver sharp, strong, and consistent haptic effects while optimizing power consumption.

View Design

TPS92560MR16BSTEVM: 500mA @ 20V, 12V in, Boost

Manufacturer: Texas Instruments

This user’s guide describes the characteristics, operation and use of the TPS92560MR16BSTEVM evaluation module. This EVM contains Texas Instruments' TPS92560 configured as a boost LED driver solution for MR16 applications. This EVM can deliver up to 12-W output power with a typical 12-VAC (50Hz/60Hz) power source. The EVM is ideal for typical MR16 or AR111 applications that require high compatibi…

View Design

TPS75003EVM-092: 1.2V@2A, 3.3V@2A, 2.5V@300mA

Manufacturer: Texas Instruments

The Texas Instruments TPS75003EVM evaluation module (EVM) helps designers evaluate the operation and performance of the TPS75003 multi-channel power IC. This device has two buck controllers and a low dropout linear regulator. The device will operate at input voltages between 2.2 V and 6.5 V. The buck controllers can provide output voltages between 1.22 V and the input voltage and output currents …

View Design

LMR14203XMKDEMO: 1.2V @ 300mA, 4.5 ~ 42V in

Manufacturer: Texas Instruments

The Texas Instruments LMR14203/06 is a PWM DC/DC buck (step-down) regulator. With a wide input range from 4.5 V-42 V, it is suitable for a variety of applications from automotive to power conditioning of unregulated sources.

View Design

TPS23750EVM-107: POE 5V @ 2A, 36 ~ 57Vin

Manufacturer: Texas Instruments

The HPA107 evaluation module implements an IEEE 802.3af-compliant class-3 power interface and a non-isolated DC/DC switching converter using the Texas Instruments TPS23750 powered device (PD) controller in a typical power-over-Ethernet (PoE) configuration.

View Design
471 Results - Page 1/48 |< < 1 2 3 4 5 > >|