M Series Catalog Datasheet by LEMO

View All Related Products | Download PDF Datasheet
M SERIES CONNECTORS
RATCHET COUPLING
®
®
www.lemo.com 1
Introduction
This catalogue gives the complete description of LEMO M series connectors. M series connectors are lightweight triple-
start ratchet coupling type connectors designed for avionics, aerospace, military, security, motorsport and heavy duty
applications.
The LEMO manufacturing programme has been extended to almost 40 series divided into 7 product families with specific
mating and environmental characteristics. Each series includes a wide variety of plug, socket and coupler models, available
in contact configurations adapted to all round cables. Watertight models are also available. Since LEMO connectors are
perfectly screened and designed to guarantee very low resistance to shell electrical continuity, they are particularly adapted
to applications where electromagnetic compatibility (EMC) is important.
Component Material (Standard) Notes
Notes: standards for surface treatment are as follows: chrome-plated SAE AMS 2460; nickel-plated SAE AMS QQ N 290 or MIL DTL 32119; gold-plated
ISO 27874. 1) anthracite colour.
Technical Characteristics
Materials and Treatments
Shell
material code
I X C chrome gold
Surface treatment (µm)
nickel
I X
Outer shell
Conical nut
Earthing crown
Coupling nut
Ratchet
Hexagonal nut
Male crimp contact
Female crimp contact
Clips
Insulator
O-ring
Sealing resin
Cable rear seal
Spring
Brass (UNS C 38500)
Aluminium alloy (AA 6262A or AA 6023)
Brass (UNS C 38500)
Aluminium alloy (AA 6262A or AA 6023)
Bronze (UNS C 54400) or special brass
Brass (UNS C 38500)
Aluminium alloy (AA 6262A or AA 6023)
Special PEEK
Brass (UNS C 38500)
Aluminium alloy (AA 6262A or AA 6023)
Brass (UNS C 34500)
Bronze (UNS C 54400)
Cu-Be or special steel
PEEK
Silicone
FPM/FKM (Viton®)
Epoxy (Araldite® or Stycast®)
Fluorosilicone
Stainless steel
0.3
14 5 1)
0.3 – –
14 5 1)
– – 1.5
– 3
14 3 1)
– 3
– 5
– – 1.0
– – 1.5
without treatment
  l
 l l
  l
 l l
 l l l
  l
 l l
 l l l
  l
 l l
l l l
l l l
 l l l
 l l l
  l
 l l
 l l l
 l l l
 l l l
<® 1.5m="">
®
®
2 www.lemo.com
Environmental performance
Note:
1) Shell material code C + Silicone O-ring (see page 1).
2) Shell material code I/X + FPM O-ring (see page 1).
3) Connectors immersed at both 70°C and 25°C according to specification. Connectors are then inspected, no visual signs of damage seen.
Fuels: Kerosene, JP4, (Nato F40) at 70°C +/- 2°C. Gasoline: ASTM 4814. Hydraulic oils: Mineral oil based MIL-H-5606.
Solvents: Isopropanol. De-icing fluids: 25% ethylene glycol.
4) No signs of damage, connectors opened and closed without difficulty. Dust or sand was not inside connector.
5) Wired mated connectors = no voltage breakdown, shell to all contacts (connected together) w/400 VAC after 1 hour at 65° C at 40’000 feet altitude.
6) Corrosion resistance. Inspection: salt deposits shall be removed by gentle wash in running water with light brushing using soft brush.
Aluminium Shell (material code: X) max: 48 hours, (material code: I) max: 500 hours. Brass shell (material code: C) over 1000 hours.
Characteristics Value IEC international MIL-spec tests
Operating temperature (mated)
Ingress protection index
Fungus
Flammability
Fluid contamination 3)
Sand and dust 4)
Lightning strike
Altitude-low temp 5)
Salt fog 6)
Thermal shock
Altitude immersion
Humidity
-55°C/+200°C 1) (HE model: -20°C/+80°C)
-20°C/+200°C 2) (HE model: -20°C/+80°C)
IP 68 (at 2 m, 15Hr) IEC 60529
Satisfied - by material analysis MIL-STD 810F-508.5
60 sec. front and back face EIA-364-104A
Fuels, gasoline, hydraulic oils, solvents, de-icing MIL-STD-810F method 504
6 hr, 55°C, blowing < 150 μm dust MIL-STD 810F-510.4
10 K amps - 6 times EIA-364-75
-65°C; 40’000 feet and 400 VAC EIA-364-105A
Alum. shell (up to 500Hr), Brass shell (1000Hr) IEC 60512-6 test 11f EIA-364-26
5 cycles: -65°C to +150°C IEC 60512-11-4 EIA-364-32 test condition IV
No moisture on contacts EIA-364-03
21 days at 95% IEC 60068-2 EIA-364-31 method IV
Electrical performance
Characteristics Value IEC international MIL-spec tests
Insulation resist. (at ambient temp.) 6)
Dielectric withstanding volt. (sea level)
Contact resistance
Current rating
Shell to shell conductivity
Shielding effectiveness, low frequency
Shielding effectiveness, high frequency
> 1012 Ω, > 1010 Ω (after humidity) IEC 60512-2 test 3a EIA-364-21
See table page 25, 26, 27 IEC 60512-2 test 4a EIA-364-20
See table below 7) IEC 60512-2 test 2a EIA-364-06
See insulator configuration page 25, 26, 27 IEC 60512-3 test 5a
< 1.5m Ω IEC 60512-2-6 EIA-364-83
≥ 80 dB up to 1GHz EIA-364-66
≥ 70 dB (3GHz), ≥ 58 dB (6GHz), ≥ 40 dB (10GHz) EIA-364-66
Note: 6) After humidity test: 21 days at 95% RH according to IEC 60068-2. Insulation resistance measured between the contacts and contact/shell.
Notes: 7) after 5000 mating cycles and the salt spray test according to IEC 60512-6 test 11 f.
Contact resistance 7)
IEC 60512-2 test 2a Value
0.5 0.7 0.9 1.3
≤ 8.7 ≤ 6.1 ≤ 4.8 ≤ 3.6
ø A
(mm)
_%
®
®
www.lemo.com 3
Note: 9) Higher contact density = larger torque force.
Mechanical performance
Note: 8) Amplitude: 30G. Frequency: 10 to 2000 Hz. Time per axis: 4 hours (X, Y, Z). No signal discontinuity above 1 µs.
Series Coupling torque
tightning (N.cm) Coupling torque
untightning (N.cm)
MM
0M
1M
2M
3M
8 4
4 5
10 11
20 14
34 29
Series
TM
4M
LM
5M
Coupling torque
tightning (N.cm) Coupling torque
untightning (N.cm)
26 30
26 25
489) 43
919) 54
Characteristics Value IEC international MIL-spec tests
Endurance
Gunfire vibration
Vibration-Sine 8)
Vibration-Random
Shock
Acceleration
Contact retention
Torque
3000 cycles IEC 60512-5 test 9a EIA-364-09
25 to 2000 Hz, 3 axis (Apache helicopter) MIL-STD-810F method 519.5
30 g, 3 axis, 12 hr MIL-STD-202 method 204-G
50-2000 Hz, 37.8 g rms-3 axes; 4h amb IEC 60512-6-4 EIA-364-28 test cond. V letter I
300 g - 3 msec IEC 60512-6-3 EIA-364-27 condition D
50 g acceleration MIL-STD-1344 - 2011-1, A
> 22 N (ø 0.7mm), > 30N (ø 0.9 mm) IEC 60512-8 test 15a
See table below
®
®
4 www.lemo.com
The M Series connector offers a new innovative design for avionics, aerospace, military, security, motorsport and heavy
duty applications.
Made of high-strength aluminium, this connector is one of the lightest and most compact of the LEMO product line.
A one-grip ratchet screw system enables quick and secure coupling of the connectors. The arctic grip makes it easy to
manipulate the connector while wearing gloves or when the connector is located in a difficult to access area.
Features
– Ratchet-coupling mechanism – Quick mating: less than 3/4 turn to seat
– Compact design for space savings – Lightweight
– Oil and fuel resistant – High vibration and shock resistance
– 360° screening for full EMC shielding – Sealed to IP68 when mated
– Colour coding / keying – Reverse gender configuration
– Scoop proof – Pin configuration from 2 to 114 contacts
– Threaded for MIL-DTL-38999L backshell
M Series
Fixed socketsStraight plugs
EG
Free sockets
PM
PM
PM
PM
PH
PH
EG
PH
FG
FG
FG
FA
FA
FA
FM
FM
Fixed sockets Fixed socketStraight plugs
FM
FM
FW
FW
FW
FX
FX
FX
FM
Fixed sockets Free socketsStraight plugs
PB
PB
PBPV
PV
PV
PF
PF
EC
EC
ED
ED
HE
PE
PE
EG
FGEG
EG
PH
FGED
Metal housing models (page 6)
Watertight
model
(unmated)
USB models (page 24)
Fibre optic models (page 21)
I T T LJ l_‘_/ f L4 % i???“ 0 I W?
®
®
www.lemo.com 5
outer shell
o-ring
hexagonal nut
insulator
female contact
earthing crown
4
5
6
1
3
2
outer shell
insulator
male contact
rear seal
tightening screw
ratchet mechanism
spring
1
3
2
4
5
6
7
Fixed socket Straight plug
21
3
46
52
3
17 5 6 4
Fixed socket
Part Numbering System
Plug
Free socket
FMN.1M.305.XLC = straight plug with key (N), 1M series, multipole type with 5 contacts, outer shell in anthracite nickel-plated aluminium
alloy, PEEK insulator, male crimp contacts.
FGN.1M.305.XLCM = straight plug with key (N), arctic grip, 1M series, multipole type with 5 contacts, outer shell in anthracite nickel-
plated aluminium alloy, PEEK insulator, male crimp contacts and with MIL-DTL-38999L thread for additional backshell (not supplied).
PMN.1M.305.XLMT = free socket with key (N), 1M series, multipole type with 5 contacts, outer shell in anthracite nickel-plated aluminium
alloy, PEEK insulator, female crimp contacts and mold stop.
HEN.1M.305.XLNP = fixed socket, nut fixing, with key (N), 1M series, multipole type with 5 contacts, outer shell in anthracite nickel-plated
aluminium alloy, PEEK insulator, female print contacts, watertight.
Note: 1) anthracite colour / 48 hours salt fog resistance. 2) anthracite colour / 500 hours salt fog resistance RoHS 2/REACH.
Part Section Showing Internal Components
Model: (page 6)
Alignment key: (page 24)
Series: (page 6)
Insert configuration: (page 25)
F M N 1 M 3 0 5 X L C
F G N 1 M 3 0 5 X L C M
P M N 1 M 3 0 5 X L M T
H E N 1 M 3 0 5 X L N PVariant:
T = Mold stop
P = Potted
M = MIL-DTL-38999L shell thread
Contact: (page 28)
Insulator:
L = PEEK (multipole page 25)
R = PEEK (mixed multipole p. 27)
Housing:
C = Chrome-plated brass
X = Nickel-plated aluminium alloy 1)
I = NiCorAITM Nickel
fluorocarbon polymer
aluminium alloy 2)
®
®
Part number example: FMN.1M.305.XLC
Note: Ls = standard gender, Lr = reverse gender
ø A
ø C
ø B
ø D
Ls/Lr
X P
ø A
ø C
ø B
ø F
ø D
Ls/Lr
MP
X
1.5
FMl Straight plug, key (N) or keys (P, R, S, T, U, V, W and X) with knurled grip
11.1 6.4 10.7 5.6 21.3 21.3 5.5 5.8
13.1 8.8 12.7 8.0 24.1 24.1 3.9 6.7
14.6 10.5 14.2 9.7 24.1 24.1 3.9 6.7
17.6 14.0 17.2 13.0 24.5 24.5 3.9 7.1
19.6 16.0 19.2 15.0 24.5 24.5 3.9 7.1
22.5 17.9 22.0 16.7 28.6 28.6 3.4 7.6
25.0 20.7 24.5 19.5 28.6 28.6 3.4 7.6
28.5 23.9 28.0 22.7 28.6 28.6 3.4 7.6
34.0 29.7 33.5 28.5 28.6 28.6 3.4 7.6
A B C D Ls Lr P X
Dimensions (mm)
FMl Straight plug, key (N) or keys (P, R, S, T, U, V, W and X) with knurled grip and mold stop
ø A
ø C
e
Ls/Lr
9 P
FMl Straight plug, key (N) or keys (P, R, S, T, U, V, W and X) with knurled grip and MIL-DTL-38999L shell thread
Metal housing models
Reference
Model Series
FMl MM
FMl 0M
FMl 1M
FMl 2M
FMl 3M
FMl TM
FMl 4M
FMl LM
FMl 5M
11.1 6.4 10.7 5.6 7.8 24.3 24.3 8.8 5.5 5.8
13.1 8.8 12.7 8.0 10.7 27.1 27.1 9.7 3.9 6.7
14.6 10.5 14.2 9.7 12.4 27.1 27.1 9.7 3.9 6.7
17.6 14.0 17.2 13.0 15.5 27.5 27.5 10.1 3.9 7.1
19.6 16.0 19.2 15.0 17.5 27.5 27.5 10.1 3.9 7.1
22.5 17.9 22.0 16.7 19.8 31.6 31.6 10.6 3.4 7.6
25.0 20.7 24.5 19.5 22.6 31.6 31.6 10.6 3.4 7.6
28.5 23.9 28.0 22.7 25.8 31.6 31.6 10.6 3.4 7.6
34.0 29.7 33.5 28.5 31.4 31.6 31.6 10.6 3.4 7.6
A B C D F Ls Lr M P X
Dimensions (mm)
Part number example: FMN.1M.305.XLCT
Note: Ls = standard gender, Lr = reverse gender
Reference
Model Series
FMl MM
FMl 0M
FMl 1M
FMl 2M
FMl 3M
FMl TM
FMl 4M
FMl LM
FMl 5M
14.6 14.2 M12x1.0 26.4 26.4 3.9 A
17.6 17.2 M15x1.0 26.4 26.4 3.9 B
19.6 19.2 M18x1.0 26.4 26.4 3.9 C
22.5 22.0 M18x1.0 30.0 30.0 3.4 C
25.0 24.5 M22x1.0 30.0 30.0 3.4 D
28.5 28.0 M25x1.0 30.0 30.0 3.4 E
34.0 33.5 M31x1.0 30.0 30.0 3.4 G
A C e Ls Lr P Code1)
Dimensions (mm)
Part number example: FMN.1M.305.XLCM
Note: Ls = standard gender, Lr = reverse gender. 1) MIL-DTL-38999L shell
size code (backshell not supplied).
Reference
Model Series
FMl 1M
FMl 2M
FMl 3M
FMl TM
FMl 4M
FMl LM
FMl 5M
6 www.lemo.com
EDEDEDIIE % +1; \EL—
®
®
www.lemo.com 7
FGl Straight plug, key (N) or keys (P, R, S, T, U, V, W and X) with arctic grip
12.0 6.4 10.7 5.6 21.3 21.3 5.5 5.8
14.4 8.8 12.7 8.0 24.1 24.1 3.9 6.7
15.9 10.5 14.2 9.7 24.1 24.1 3.9 6.7
18.9 14.0 17.2 13.0 24.5 24.5 3.9 7.1
20.9 16.0 19.2 15.0 24.5 24.5 3.9 7.1
23.4 17.9 22.0 16.7 28.6 28.6 3.4 7.6
25.9 20.7 24.5 19.5 28.6 28.6 3.4 7.6
29.4 23.9 28.0 22.7 28.6 28.6 3.4 7.6
34.9 29.7 33.5 28.5 28.6 28.6 3.4 7.6
A B C D Ls Lr P X
Dimensions (mm)
ø A
ø C
ø B
ø D
Ls/Lr
P
X
Part number example: FGN.1M.305.XLC
Note: Ls = standard gender, Lr = reverse gender
FGl Straight plug, key (N) or keys (P, R, S, T, U, V, W and X) with arctic grip and mold stop
ø A
ø C
ø B
ø F
ø D
Ls/Lr
M P
X
1.5
Part number example: FGN.1M.305.XLCT
Note: Ls = standard gender, Lr = reverse gender
FGl Straight plug, key (N) or keys (P, R, S, T, U, V, W and X) with arctic grip and MIL-DTL-38999L shell thread
e
9
ø A
ø C
Ls/Lr
P
15.9 14.2 M12x1.0 26.4 26.4 3.9 A
18.9 17.2 M15x1.0 26.4 26.4 3.9 B
20.9 19.2 M18x1.0 26.4 26.4 3.9 C
23.4 22.0 M18x1.0 30.0 30.0 3.4 C
25.9 24.5 M22x1.0 30.0 30.0 3.4 D
29.4 28.0 M25x1.0 30.0 30.0 3.4 E
34.9 33.5 M31x1.0 30.0 30.0 3.4 G
A C e Ls Lr P Code1)
Dimensions (mm)
Part number example: FGN.1M.305.XLCM
Note: Ls = standard gender, Lr = reverse gender. 1) MIL-DTL-38999L shell
size code (backshell not supplied).
12.0 6.4 10.7 5.6 7.8 24.3 24.3 8.8 5.5 5.8
14.4 8.8 12.7 8.0 10.7 27.1 27.1 9.7 3.9 6.7
15.9 10.5 14.2 9.7 12.4 27.1 27.1 9.7 3.9 6.7
18.9 14.0 17.2 13.0 15.5 27.5 27.5 10.1 3.9 7.1
20.9 16.0 19.2 15.0 17.5 27.5 27.5 10.1 3.9 7.1
23.4 17.9 22.0 16.7 19.8 31.6 31.6 10.6 3.4 7.6
25.9 20.7 24.5 19.5 22.6 31.6 31.6 10.6 3.4 7.6
29.4 23.9 28.0 22.7 25.8 31.6 31.6 10.6 3.4 7.6
34.9 29.7 33.5 28.5 31.4 31.6 31.6 10.6 3.4 7.6
A B C D F Ls Lr M P X
Dimensions (mm)
Reference
Model Series
FGl MM
FGl 0M
FGl 1M
FGl 2M
FGl 3M
FGl TM
FGl 4M
FGl LM
FGl 5M
Reference
Model Series
FGl 1M
FGl 2M
FGl 3M
FGl TM
FGl 4M
FGl LM
FGl 5M
Reference
Model Series
FGl MM
FGl 0M
FGl 1M
FGl 2M
FGl 3M
FGl TM
FGl 4M
FGl LM
FGl 5M
®
®
8 www.lemo.com
ø A1
ø C
Ls/Lr
G
K
X
P
1.5
ø B
ø D
ø E
N
Hø V
ø A
FXl Straight plug with square flange, key (N) or keys (P, R, S, T, U, V, W and X) with knurled grip
FXl Straight plug with square flange, key (N) or keys (P, R, S, T, U, V, W and X) with knurled grip and mold stop
ø A1
ø C
Ls/Lr
G
K
P
1.5
ø E
ø B
ø F
ø D
M
X
1.5
N
Hø V
ø A
FXl Straight plug with square flange, key (N) or keys (P, R, S, T, U, V, W and X) with knurled grip
and MIL-DTL-38999L shell thread
ø A1
ø C
Ls/Lr
G
K
P
1.5
ø E
e
9
N
Hø V
ø A
Part number example: FXN.1M.305.XLCM
Note: The dimensions «N» and «V» are the same as the FXl models and the dimen-
sion «P» is the same as the FMl models. Ls = standard gender, Lr = reverse gender.
1) MIL-DTL-38999L shell size code (backshell not supplied).
Part number example: FXN.1M.305.XLC
Note: The dimensions «P» and «X» are the same as the FMl models.
Ls = standard gender, Lr = reverse gender.
Dimensions (mm)
Reference
Model Series
FXl MM
FXl 0M
FXl 1M
FXl 2M
FXl 3M
FXl TM
FXl 4M
FXl LM
FXl 5M
A A1 B C D E G H K Ls Lr N V
21.5 11.1 6.4 10.7 5.6 9.5 17.0 12.0 1.5 26.1 26.1 17.0 2.7
26.9 13.1 8.8 12.7 8.0 12.2 18.9 15.1 1.5 29.1 29.1 20.6 2.7
31.4 14.6 10.5 14.2 9.7 13.7 18.9 18.3 1.5 29.1 29.1 23.8 3.3
34.6 17.6 14.0 17.2 13.0 16.7 18.9 20.6 1.5 29.5 29.5 26.1 3.3
34.6 19.6 16.0 19.2 15.0 18.7 18.9 20.6 1.5 29.5 29.5 26.1 3.3
38.0 22.5 17.9 22.0 16.7 21.5 22.5 23.0 2.0 34.8 34.8 28.5 3.3
40.3 25.0 20.7 24.5 19.5 24.0 22.5 24.6 2.0 34.8 34.8 30.1 3.3
43.7 28.5 23.9 28.0 22.7 27.5 22.5 27.0 2.0 34.8 34.8 32.5 3.3
47.0 34.0 29.7 33.5 28.5 33.0 22.5 29.4 2.0 34.8 34.8 37.0 3.3
Part number example: FXN.1M.305.XLCT
Note: The dimensions «F», «M», «P» and «X» are the same as the FMl models.
Ls = standard gender, Lr = reverse gender.
Dimensions (mm)
Reference
Model Series
FXl MM
FXl 0M
FXl 1M
FXl 2M
FXl 3M
FXl TM
FXl 4M
FXl LM
FXl 5M
A A1 B C D E G H K Ls Lr N V
21.5 11.1 6.4 10.7 5.6 9.5 17.0 12.0 1.5 29.1 29.1 17.0 2.7
26.9 13.1 8.8 12.7 8.0 12.2 18.9 15.1 1.5 32.1 32.1 20.6 2.7
31.4 14.6 10.5 14.2 9.7 13.7 18.9 18.3 1.5 32.1 32.1 23.8 3.3
34.6 17.6 14.0 17.2 13.0 16.7 18.9 20.6 1.5 32.5 32.5 26.1 3.3
34.6 19.6 16.0 19.2 15.0 18.7 18.9 20.6 1.5 32.5 32.5 26.1 3.3
38.0 22.5 17.9 22.0 16.7 21.5 22.5 23.0 2.0 37.8 37.8 28.5 3.3
40.3 25.0 20.7 24.5 19.5 24.0 22.5 24.6 2.0 37.8 37.8 30.1 3.3
43.7 28.5 23.9 28.0 22.7 27.5 22.5 27.0 2.0 37.8 37.8 32.5 3.3
47.0 34.0 29.7 33.5 28.5 33.0 22.5 29.4 2.0 37.8 37.8 37.0 3.3
31.4 14.6 14.2 M12x1.0 13.7 18.9 18.3 1.5 31.4 31.4 A
34.6 17.6 17.2 M15x1.0 16.7 18.9 20.6 1.5 31.4 31.4 B
34.6 19.6 19.2 M18x1.0 18.7 18.9 20.6 1.5 31.4 31.4 C
38.0 22.5 22.0 M18x1.0 21.5 22.5 23.0 2.0 36.2 36.2 C
40.3 25.0 24.5 M22x1.0 24.0 22.5 24.6 2.0 36.2 36.2 D
43.7 28.5 28.0 M25x1.0 27.5 22.5 27.0 2.0 36.2 36.2 E
47.0 34.0 33.5 M31x1.0 33.0 22.5 29.4 2.0 36.2 36.2 F
Dimensions (mm)
Reference
Model Series
FXl 1M
FXl 2M
FXl 3M
FXl TM
FXl 4M
FXl LM
FXl 5M
A A1 C e E G H K Ls Lr Code1)
<9 “="" *="" “="">
®
®
www.lemo.com 9
Part number example: FWN.1M.305.XLC
Note: The dimensions «P» and «X» are the same as the FMl models.
Ls = standard gender, Lr = reverse gender.
Ls/Lr
G
K
X
1.5
ø B
ø D
ø E
ø A1
ø C
P
N
Hø V
ø A
FWl Straight plug with square flange, key (N) or keys (P, R, S, T, U, V, W and X) with arctic grip
Ls/Lr
G
K
1.5
ø E
ø B
ø F
ø D
M
X
1.5
ø A1
ø C
P
N
Hø V
ø A
FWl Straight plug with square flange, key (N) or keys (P, R, S, T, U, V, W and X) with arctic grip and mold stop
Part number example: FWN.1M.305.XLCT
Note: The dimensions «F», «M», «P» and «X» are the same as the FMl models.
Ls = standard gender, Lr = reverse gender.
FWl Straight plug with square flange, key (N) or keys (P, R, S, T, U, V, W and X) with arctic grip
and MIL-DTL-38999L shell thread
Ls/Lr
G
K
1.5
ø E
e
9
ø A1
ø C
P
N
Hø V
ø A
Part number example: FWN.1M.305.XLCM
Note: The dimensions «N» and «V» are the same as the FWl models and the dimen-
sion «P» is the same as the FMl models. Ls = standard gender, Lr = reverse gender.
1) MIL-DTL-38999L shell size code (backshell not supplied).
Dimensions (mm)
21.5 12.0 6.4 10.7 5.6 9.5 17.0 12.0 1.5 29.1 29.1 17.0 2.7
26.9 14.4 8.8 12.7 8.0 12.2 18.9 15.1 1.5 32.1 32.1 20.6 2.7
31.4 15.9 10.5 14.2 9.7 13.7 18.9 18.3 1.5 32.1 32.1 23.8 3.3
34.6 18.9 14.0 17.2 13.0 16.7 18.9 20.6 1.5 32.5 32.5 26.1 3.3
34.6 20.9 16.0 19.2 15.0 18.7 18.9 20.6 1.5 32.5 32.5 26.1 3.3
38.0 23.4 17.9 22.0 16.7 21.5 22.5 23.0 2.0 37.8 37.8 28.5 3.3
40.3 25.9 20.7 24.5 19.5 24.0 22.5 24.6 2.0 37.8 37.8 30.1 3.3
43.7 29.4 23.9 28.0 22.7 27.5 22.5 27.0 2.0 37.8 37.8 32.5 3.3
47.0 34.9 29.7 33.5 28.5 33.0 22.5 29.4 2.0 37.8 37.8 37.0 3.3
A A1 B C D E G H K Ls Lr N V
Reference
Model Series
FWl MM
FWl 0M
FWl 1M
FWl 2M
FWl 3M
FWl TM
FWl 4M
FWl LM
FWl 5M
A A1 B C D E G H K Ls Lr N V
Dimensions (mm)
Reference
Model Series
FWl MM
FWl 0M
FWl 1M
FWl 2M
FWl 3M
FWl TM
FWl 4M
FWl LM
FWl 5M
21.5 12.0 6.4 10.7 5.6 9.5 17.0 12.0 1.5 26.1 26.1 17.0 2.7
26.9 14.4 8.8 12.7 8.0 12.2 18.9 15.1 1.5 29.1 29.1 20.6 2.7
31.4 15.9 10.5 14.2 9.7 13.7 18.9 18.3 1.5 29.1 29.1 23.8 3.3
34.6 18.9 14.0 17.2 13.0 16.7 18.9 20.6 1.5 29.5 29.5 26.1 3.3
34.6 20.9 16.0 19.2 15.0 18.7 18.9 20.6 1.5 29.5 29.5 26.1 3.3
38.0 23.4 17.9 22.0 16.7 21.5 22.5 23.0 2.0 34.8 34.8 28.5 3.3
40.3 25.9 20.7 24.5 19.5 24.0 22.5 24.6 2.0 34.8 34.8 30.1 3.3
43.7 29.4 23.9 28.0 22.7 27.5 22.5 27.0 2.0 34.8 34.8 32.5 3.3
47.0 34.9 29.7 33.5 28.5 33.0 22.5 29.4 2.0 34.8 34.8 37.0 3.3
31.4 15.9 14.2 M12x1.0 13.7 18.9 18.3 1.5 31.4 31.4 A
34.6 18.9 17.2 M15x1.0 16.7 18.9 20.6 1.5 31.4 31.4 B
34.6 20.9 19.2 M18x1.0 18.7 18.9 20.6 1.5 31.4 31.4 C
38.0 23.4 22.0 M18x1.0 21.5 22.5 23.0 2.0 36.2 36.2 C
40.3 25.9 24.5 M22x1.0 24.0 22.5 24.6 2.0 36.2 36.2 D
43.7 29.4 28.0 M25x1.0 27.5 22.5 27.0 2.0 36.2 36.2 E
47.0 34.9 33.5 M31x1.0 33.0 22.5 29.4 2.0 36.2 36.2 F
A A1 C e E G H K Ls Lr Code1)
Dimensions (mm)
Reference
Model Series
FWl 1M
FWl 2M
FWl 3M
FWl TM
FWl 4M
FWl LM
FWl 5M
®
®
10 www.lemo.com
FAl Straight plug with square flange, non-coupling, key (N) or keys (P, R, S, T, U, V, W and X)
ø C
Ls/Lr
G
K
XP
ø B
ø D
ø E
N
Hø V
ø A
21.5 6.4 10.7 5.6 9.5 17.0 12.0 1.5 26.1 26.1 17.0 5.5 2.7
26.9 8.8 12.7 8.0 12.2 18.9 15.1 1.5 29.1 29.1 20.6 3.9 2.7
31.4 10.5 14.2 9.7 13.7 18.9 18.3 1.5 29.1 29.1 23.8 3.9 3.3
34.6 14.0 17.2 13.0 16.7 18.9 20.6 1.5 29.5 29.5 26.1 3.9 3.3
34.6 16.0 19.2 15.0 18.7 18.9 20.6 1.5 29.5 29.5 26.1 3.9 3.3
38.0 17.9 22.0 16.7 21.5 22.5 23.0 2.0 34.8 34.8 28.5 3.4 3.3
40.3 20.7 24.5 19.5 24.0 22.5 24.6 2.0 34.8 34.8 30.1 3.4 3.3
43.7 23.9 28.0 22.7 27.5 22.5 27.0 2.0 34.8 34.8 32.5 3.4 3.3
47.0 29.7 33.5 28.5 33.0 22.5 29.4 2.0 34.8 34.8 37.0 3.4 3.3
A B C D E G H K Ls Lr N P V
Dimensions (mm)
Part number example: FAN.1M.305.XLC
Note: The dimension «X» is the same as the FMl models.
Ls = standard gender, Lr = reverse gender.
FAl Straight plug with square flange, non-coupling, key (N) or keys (P, R, S, T, U, V, W and X) with mold stop
ø C
Ls/Lr
G
K
P
ø E
ø B
ø F
ø D
M
X
1.5
N
Hø V
ø A
Part number example: FAN.1M.305.XLC
Note: The dimension «X» is the same as the FMl models.
Ls = standard gender, Lr = reverse gender.
FAl Straight plug with square flange, non-coupling, key (N) or keys (P, R, S, T, U, V, W and X)
with MIL-DTL-38999L shell thread
ø C
Ls/Lr
G
K
P
ø E
e
9
N
Hø V
ø A
Part number example: FAN.1M.305.XLCM
Note: The dimensions «P» and «V» are the same as the FAl models.
Ls = standard gender, Lr = reverse gender. 1) MIL-DTL-38999L shell size code
(backshell not supplied).
Reference
Model Series
FAl MM
FAl 0M
FAl 1M
FAl 2M
FAl 3M
FAl TM
FAl 4M
FAl LM
FAl 5M
21.5 6.4 10.7 5.6 9.5 17.0 12.0 1.5 29.1 29.1 17.0 5.5 2.7
26.9 8.8 12.7 8.0 12.2 18.9 15.1 1.5 32.1 32.1 20.6 3.9 2.7
31.4 10.5 14.2 9.7 13.7 18.9 18.3 1.5 32.1 32.1 23.8 3.9 3.3
34.6 14.0 17.2 13.0 16.7 18.9 20.6 1.5 32.5 32.5 26.1 3.9 3.3
34.6 16.0 19.2 15.0 18.7 18.9 20.6 1.5 32.5 32.5 26.1 3.9 3.3
38.0 17.9 22.0 16.7 21.5 22.5 23.0 2.0 37.8 37.8 28.5 3.4 3.3
40.3 20.7 24.5 19.5 24.0 22.5 24.6 2.0 37.8 37.8 30.1 3.4 3.3
43.7 23.9 28.0 22.7 27.5 22.5 27.0 2.0 37.8 37.8 32.5 3.4 3.3
47.0 29.7 33.5 28.5 33.0 22.5 29.4 2.0 37.8 37.8 37.0 3.4 3.3
A B C D E G H K Ls Lr N P V
Dimensions (mm)
Reference
Model Series
FAl MM
FAl 0M
FAl 1M
FAl 2M
FAl 3M
FAl TM
FAl 4M
FAl LM
FAl 5M
31.4 14.2 M12x1.0 13.7 18.9 18.3 1.5 31.4 31.4 23.8 A
34.6 17.2 M15x1.0 16.7 18.9 20.6 1.5 31.4 31.4 26.1 B
34.6 19.2 M18x1.0 18.7 18.9 20.6 1.5 31.4 31.4 26.1 C
38.0 22.0 M18x1.0 21.5 22.5 23.0 2.0 36.2 36.2 28.5 C
40.3 24.5 M22x1.0 24.0 22.5 24.6 2.0 36.2 36.2 30.1 D
43.7 28.0 M25x1.0 27.5 22.5 27.0 2.0 36.2 36.2 32.5 E
47.0 33.5 M31x1.0 33.0 22.5 29.4 2.0 36.2 36.2 37.0 F
A C e E G H K Ls Lr N Code1)
Dimensions (mm)
Reference
Model Series
FAl 1M
FAl 2M
FAl 3M
FAl TM
FAl 4M
FAl LM
FAl 5M
Ij-DJJDIIE @Lfl:
®
®
www.lemo.com 11
EGl Fixed socket, nut fixing, key (N) or keys (P, R, S, T, U, V, W and X)
Part number example: EGN.1M.305.XLM
Panel cut-out (page 36).
Note: Ls = standard gender, Lr = reverse gender
EGl Fixed socket, nut fixing, key (N) or keys (P, R, S, T, U, V, W and X) for printed circuit
Part number example: EGN.1M.305.XLN
Panel cut-out (page 36). PCB drilling pattern (page 37).
Note: Ls = standard gender, Lr = reverse gender
ø C
e
Ls/Lr
P
D
E maxi
S 2
S 1
ø C
e
Ls/Lr
G
P
D
E maxi
S 1 S 2
4.5
5.4
Dimensions (mm)
10.7 5.2 M7x0.5 4.5 15.0 15.0 3.7 6.3 9.0
12.7 6.8 M9x0.6 5.0 18.3 18.3 5.3 8.2 11.0
14.2 6.8 M11x1.0 4.5 18.3 18.3 5.3 9.5 13.0
17.2 6.8 M14x1.0 4.5 18.3 18.3 5.3 12.5 17.0
19.2 6.8 M16x1.0 4.0 18.3 18.3 5.3 14.5 19.0
22.0 9.4 M18x1.0 4.0 20.0 21.9 7.9 16.5 22.0
24.5 9.4 M21x1.0 4.0 20.0 21.9 7.9 19.5 25.0
28.0 9.4 M24x1.0 4.0 20.0 21.9 7.9 22.5 30.0
33.5 9.4 M30x1.0 4.0 20.0 21.9 7.9 28.5 36.0
C D e E Ls Lr P S1 S2
Reference
Model Series
EGl MM
EGl 0M
EGl 1M
EGl 2M
EGl 3M
EGl TM
EGl 4M
EGl LM
EGl 5M
Dimensions (mm)
C D e E G Ls Lr P S1 S2
10.7 5.2 M7x0.5 4.5 13.8 15.0 15.0 3.7 6.3 9.0
12.7 6.8 M9x0.6 5.0 16.8 18.3 18.3 5.3 8.2 11.0
14.2 6.8 M11x1.0 4.5 16.8 18.3 18.3 5.3 9.5 13.0
17.2 6.8 M14x1.0 4.5 16.8 18.3 18.3 5.3 12.5 17.0
19.2 6.8 M16x1.0 4.0 16.8 18.3 18.3 5.3 14.5 19.0
22.0 9.4 M18x1.0 4.0 18.9 20.0 21.9 7.9 16.5 22.0
24.5 9.4 M21x1.0 4.0 18.9 20.0 21.9 7.9 19.5 25.0
28.0 9.4 M24x1.0 4.0 18.9 20.0 21.9 7.9 22.5 30.0
33.5 9.4 M30x1.0 4.0 18.9 20.0 21.9 7.9 28.5 36.0
Reference
Model Series
EGl MM
EGl 0M
EGl 1M
EGl 2M
EGl 3M
EGl TM
EGl 4M
EGl LM
EGl 5M
W LEM AW 7 14* ESE: : “41‘
®
®
12 www.lemo.com
ECl Fixed socket with two nuts, key (N) or keys (P, R, S, T, U, V, W and X) for printed circuit
e
ø A
ø C
ø B
Ls/Lr
P
E maxi
G
S 2
S 1
S 3
5.4
4.5 Part number example: ECN.1M.305.XLN
Panel cut-out (page 36). PCB drilling pattern (page 37).
Note: Ls = standard gender, Lr = reverse gender. This model is not IP68 (no panel sealing).
A B C E e G Ls Lr P S1 S2 S3
Dimensions (mm)
14 2.85 13.5 5.0 M10x0.50 13.8 15.0 15.0 3.7 9.0 11.0 12.0
17 4.72 18.2 5.0 M13x0.75 16.8 18.3 18.3 5.3 11.5 14.0 16.0
18 5.95 19.2 5.0 M14x1.00 16.8 18.3 18.3 5.3 12.5 16.0 17.0
21 8.95 21.5 4.0 M17x1.00 16.8 18.3 18.3 5.3 15.5 18.0 19.0
23 10.95 25.0 4.0 M19x1.00 16.8 18.3 18.3 5.3 17.5 20.0 22.0
27 12.30 28.0 2.5 M22x1.00 18.9 20.0 21.9 7.9 20.5 23.0 25.0
29 13.95 34.0 2.5 M24x1.00 18.9 20.0 21.9 7.9 22.5 25.0 30.0
33 17.95 36.0 2.5 M28x1.00 18.9 20.0 21.9 7.9 26.5 29.0 32.0
38 22.90 41.0 2.5 M33x1.00 18.9 20.0 21.9 7.9 31.5 34.0 37.0
Reference
Model Series
ECl MM
ECl 0M
ECl 1M
ECl 2M
ECl 3M
ECl TM
ECl 4M
ECl LM
ECl 5M
ECl Fixed socket with two nuts, key (N) or keys (P, R, S, T, U, V, W and X)
e
ø A
ø C
ø B
Ls/Lr
P
E maxi
G
S 2
S 1S 3
Part number example: ECN.1M.305.XLM
Panel cut-out (page 36).
Note: Ls = standard gender, Lr = reverse gender. This model is not IP68
(no panel sealing).
A B C E e G Ls Lr P S1 S2 S3
Dimensions (mm)
14 2.85 13.5 5.0 M10x0.50 13.8 15.0 15.0 3.7 9.0 11.0 12.0
17 4.72 18.2 5.0 M13x0.75 16.8 18.3 18.3 5.3 11.5 14.0 16.0
18 5.95 19.2 5.0 M14x1.00 16.8 18.3 18.3 5.3 12.5 16.0 17.0
21 8.95 21.5 4.0 M17x1.00 16.8 18.3 18.3 5.3 15.5 18.0 19.0
23 10.95 25.0 4.0 M19x1.00 16.8 18.3 18.3 5.3 17.5 20.0 22.0
27 12.30 28.0 2.5 M22x1.00 18.9 20.0 21.9 7.9 20.5 23.0 25.0
29 13.95 34.0 2.5 M24x1.00 18.9 20.0 21.9 7.9 22.5 25.0 30.0
33 17.95 36.0 2.5 M28x1.00 18.9 20.0 21.9 7.9 26.5 29.0 32.0
38 22.90 41.0 2.5 M33x1.00 18.9 20.0 21.9 7.9 31.5 34.0 37.0
Reference
Model Series
ECl MM
ECl 0M
ECl 1M
ECl 2M
ECl 3M
ECl TM
ECl 4M
ECl LM
ECl 5M
EDEDEDIIE L1 ' ! 7: ‘: ffi‘t‘i
®
®
www.lemo.com 13
EDl Fixed socket with square flange, key (N) or keys (P, R, S, T, U, V, W and X)
ø C
ø B
Ls/Lr
NK
G
ø V
ø A P
HPart number example: EDN.1M.305.XLM
Panel cut-out (page 36).
Note: Ls = standard gender, Lr = reverse gender
A B C G H K Ls Lr N P V
Dimensions (mm)
18.6 4.70 10.7 12.3 9.5 1.5 17.0 17.0 14.5 3.7 2.7
20.6 4.72 12.7 12.8 11.0 1.5 18.3 18.3 16.0 5.3 2.7
23.8 5.95 14.2 12.8 12.9 1.5 18.3 18.3 18.4 5.3 3.3
26.9 8.95 17.2 12.8 15.1 1.5 18.3 18.3 20.6 5.3 3.3
29.0 10.95 19.2 12.8 16.6 1.5 18.3 18.3 22.1 5.3 3.3
31.4 12.30 22.0 14.5 18.3 2.0 20.0 21.9 23.8 7.9 3.3
34.6 13.95 24.5 14.5 20.6 2.0 20.0 21.9 26.1 7.9 3.3
38.0 17.95 28.0 14.5 23.0 2.0 20.0 21.9 28.5 7.9 3.3
43.7 22.90 33.5 14.5 27.0 2.0 20.0 21.9 32.5 7.9 3.3
Reference
Model Series
EDl MM
EDl 0M
EDl 1M
EDl 2M
EDl 3M
EDl TM
EDl 4M
EDl LM
EDl 5M
EDl Fixed socket with square flange, key (N) or keys (P, R, S, T, U, V, W and X) for printed circuit
ø C
ø B
Ls/Lr
K
G
5.4
4.5
P
N
ø V
H
ø A
Part number example: EDN.1M.305.XLN
Panel cut-out (page 36). PCB drilling pattern (page 37).
Note: Ls = standard gender, Lr = reverse gender
A B C G H K Ls Lr N P V
Dimensions (mm)
18.6 4.70 10.7 12.3 9.5 1.5 17.0 17.0 14.5 3.7 2.7
20.6 4.72 12.7 12.8 11.0 1.5 18.3 18.3 16.0 5.3 2.7
23.8 5.95 14.2 12.8 12.9 1.5 18.3 18.3 18.4 5.3 3.3
26.9 8.95 17.2 12.8 15.1 1.5 18.3 18.3 20.6 5.3 3.3
29.0 10.95 19.2 12.8 16.6 1.5 18.3 18.3 22.1 5.3 3.3
31.4 12.30 22.0 14.5 18.3 2.0 20.0 21.9 23.8 7.9 3.3
34.6 13.95 24.5 14.5 20.6 2.0 20.0 21.9 26.1 7.9 3.3
38.0 17.95 28.0 14.5 23.0 2.0 20.0 21.9 28.5 7.9 3.3
43.7 22.90 33.5 14.5 27.0 2.0 20.0 21.9 32.5 7.9 3.3
Reference
Model Series
EDl MM
EDl 0M
EDl 1M
EDl 2M
EDl 3M
EDl TM
EDl 4M
EDl LM
EDl 5M
®
®
14 www.lemo.com
PEl Fixed socket, nut fixing, key (N) or keys (P, R, S, T, U, V, W and X) with mold stop (back panel mounting)
e
ø A
Ls/Lr
P
R
E maxi S 2
ø B
ø F
ø C
ø D
M
X
1.5
S 1
Part number example: PEN.1M.305.XLMT
Panel cut-out (page 36).
Note: this model is only available with mold stop. The dimensions «F» and «X» are the
same as the PBl models. Ls = standard gender, Lr = reverse gender.
A B C D E e Ls Lr M P R S1 S2
Dimensions (mm)
14 6.4 13.8 5.6 4.0 M10x0.50 21.4 21.4 8.8 3.7 10.5 9.0 11
17 8.8 16.8 8.0 5.0 M13x0.75 25.6 25.6 9.7 5.3 13.8 11.5 14
18 10.5 17.8 9.7 5.0 M14x1.00 25.6 25.6 9.7 5.3 13.8 12.5 16
21 14.0 20.8 13.0 5.0 M17x1.00 26.0 26.0 10.1 5.3 13.8 15.5 18
23 16.0 22.8 15.0 5.0 M19x1.00 26.0 26.0 10.1 5.3 13.8 17.5 20
27 17.9 25.8 16.7 4.0 M22x1.00 29.5 30.1 10.6 7.9 16.9 20.5 23
29 20.7 27.8 19.5 4.0 M24x1.00 29.5 30.1 10.6 7.9 16.9 22.5 25
33 23.9 31.8 22.7 4.0 M28x1.00 29.5 30.1 10.6 7.9 16.9 26.5 29
38 29.7 36.8 28.5 4.0 M33x1.00 29.5 30.1 10.6 7.9 16.9 31.5 34
Reference
Model Series
PEl MM
PEl 0M
PEl 1M
PEl 2M
PEl 3M
PEl TM
PEl 4M
PEl LM
PEl 5M
PEl Fixed socket, nut fixing, key (N) or keys (P, R, S, T, U, V, W and X) with MIL-DTL-38999L shell thread
e
ø A
Ls/Lr
P
R
E maxi S 2
ø C
S 1
e1
9
Part number example: PEN.1M.305.XLMM
Panel cut-out (page 36).
Note: Ls = standard gender, Lr = reverse gender. The dimension «P» is the same as the
PBl models. 1) MIL-DTL-38999L shell size code (backshell not supplied).
Dimensions (mm)
18 17.8 5.0 M14x1.0 M12x1.0 26.4 26.4 13.8 12.5 16 A
21 20.8 5.0 M17x1.0 M15x1.0 26.4 26.4 13.8 15.5 18 B
23 22.8 5.0 M19x1.0 M18x1.0 26.4 26.4 13.8 17.5 20 C
27 25.8 4.0 M22x1.0 M18x1.0 28.2 30.1 16.9 20.5 23 C
29 27.8 4.0 M24x1.0 M22x1.0 28.2 30.1 16.9 22.5 25 D
33 31.8 4.0 M28x1.0 M25x1.0 28.2 30.1 16.9 26.5 29 E
38 36.8 4.0 M33x1.0 M31x1.0 28.2 30.1 16.9 31.5 34 G
A C E e e1 Ls Lr R S1 S2 Code1)
Reference
Model Series
PEl 1M
PEl 2M
PEl 3M
PEl TM
PEl 4M
PEl LM
PEl 5M
@Lfl:
®
®
www.lemo.com 15
PFl Fixed socket with square flange, key (N) or keys (P, R, S, T, U, V, W and X)
with MIL-DTL-38999L shell thread
e
ø E
9
ø C
Ss/Sr G
KP
N
ø 3.3
ø A
H
Part number example: PFN.1M.305.XLMM
Panel cut-out (page 36).
Note: The dimension «P» is the same as the PBl models. Ss = standard gender,
Sr = reverse gender. 1) MIL-DTL-38999L shell size code (backshell not supplied).
Dimensions (mm)
A C e E G H K N Ss Sr Code1)
23.8 14.2 M12x1.0 12.4 12.8 12.9 1.5 18.4 12.2 12.2 A
26.9 17.2 M15x1.0 15.5 12.8 15.1 1.5 20.6 12.2 12.2 B
29.0 19.2 M18x1.0 17.5 12.8 16.6 1.5 22.1 12.2 12.2 C
31.4 22.0 M18x1.0 19.8 14.5 18.3 2.0 23.8 11.7 13.6 C
34.6 24.5 M22x1.0 22.6 14.5 20.6 2.0 26.1 11.7 13.6 D
38.0 28.0 M25x1.0 25.8 14.5 23.0 2.0 28.5 11.7 13.6 E
47.0 33.5 M31x1.0 33.0 14.5 29.4 2.0 37.0 11.7 13.6 G
Reference
Model Series
PFl 1M
PFl 2M
PFl 3M
PFl TM
PFl 4M
PFl LM
PFl 5M
PFl Fixed socket with square flange, key (N) or keys (P, R, S, T, U, V, W and X) with mold stop
ø B
ø F
ø E
ø D
X
M
1.5
ø C
Ss/Sr G
KP
N
ø V
ø A
H
Part number example: PFN.1M.305.XLMT
Panel cut-out (page 36).
Note: this model is only available with mold stop. The dimensions «M», «P» and «X» are
the same as the PBl models. Ss = standard gender, Sr = reverse gender.
A B C D E F G H K N Ss Sr V
Dimensions (mm)
Reference
Model Series
PFl MM
PFl 0M
PFl 1M
PFl 2M
PFl 3M
PFl TM
PFl 4M
PFl LM
PFl 5M
18.6 6.4 10.7 5.6 7.8 7.8 12.3 9.5 1.5 14.5 10.6 10.6 2.7
20.6 8.8 12.7 8.0 10.7 10.7 12.8 11.0 1.5 16.0 11.3 11.3 2.7
23.8 10.5 14.2 9.7 12.4 12.4 12.8 12.9 1.5 18.4 11.3 11.3 3.3
26.9 14.0 17.2 13.0 15.5 15.5 12.8 15.1 1.5 20.6 11.7 11.7 3.3
29.0 16.0 19.2 15.0 17.5 17.5 12.8 16.6 1.5 22.1 11.7 11.7 3.3
31.4 17.9 22.0 16.7 19.8 19.8 14.5 18.3 2.0 23.8 13.0 13.6 3.3
34.6 20.7 24.5 19.5 22.6 22.6 14.5 20.6 2.0 26.1 13.0 13.6 3.3
38.0 23.9 28.0 22.7 25.8 25.8 14.5 23.0 2.0 28.5 13.0 13.6 3.3
47.0 29.7 33.5 28.5 33.0 31.4 14.5 29.4 2.0 37.0 13.0 13.6 3.3
«N c‘i’
®
®
PBl Fixed socket with antivibration flange, key (N) or keys (P, R, S, T, U, V, W and X), 2 holes fixing with mold stop
Part number example: PBN.1M.305.XLMT
Note: Ss = standard gender, Sr = reverse gender
A
Ss/Sr P
G
ø C
ø B
ø F
ø D
M
X
1.5
N
H
2.7 (MM)
3.3 (0M-5M)
1.5 (MM)
2.0 (0M-5M)
Dimensions (mm)
A B C D F G H M N P Ss Sr X
Reference
Model Series
PBl MM
PBl 0M
PBl 1M
PBl 2M
PBl 3M
PBl TM
PBl 4M
PBl LM
PBl 5M
21.0 6.4 11.3 5.6 7.8 6.7 16.2 8.8 12.5 3.7 16.2 16.2 5.8
27.0 8.8 14.5 8.0 10.7 8.3 21.4 9.7 16.0 5.3 18.3 18.3 6.7
29.0 10.5 16.5 9.7 12.4 8.3 23.4 9.7 18.0 5.3 18.3 18.3 6.7
32.0 14.0 19.5 13.0 15.5 8.3 26.4 10.1 21.0 5.3 18.7 18.7 7.1
35.0 16.0 21.5 15.0 17.5 8.3 29.0 10.1 23.0 5.3 18.7 18.7 7.1
38.5 17.9 24.5 16.7 19.8 11.0 32.5 10.6 26.0 7.9 18.2 18.2 7.6
41.0 20.7 27.5 19.5 22.6 11.0 35.0 10.6 29.0 7.9 18.2 18.2 7.6
44.0 23.9 30.5 22.7 25.8 11.0 38.0 10.6 32.0 7.9 18.2 18.2 7.6
51.0 29.7 37.5 28.5 31.4 11.0 45.0 10.6 39.0 7.9 18.2 18.2 7.6
PBl Fixed socket with antivibration flange, key (N) or keys (P, R, S, T, U, V, W and X), 2 holes fixing
A
Ss/Sr
X
P
N
G
H
2.7 (MM)
3.3 (0M-5M)
1.5 (MM)
2.0 (0M-5M)
ø C
ø D
ø B
Part number example: PBN.1M.305.XLM
Note: Ss = standard gender, Sr = reverse gender
Dimensions (mm)
A B C D G H N P Ss Sr X
21.0 6.4 11.3 5.6 6.7 16.2 12.5 3.7 13.2 13.2 5.8
27.0 8.8 14.5 8.0 8.3 21.4 16.0 5.3 15.3 15.3 6.7
29.0 10.5 16.5 9.7 8.3 23.4 18.0 5.3 15.3 15.3 6.7
32.0 14.0 19.5 13.0 8.3 26.4 21.0 5.3 15.7 15.7 7.1
35.0 16.0 21.5 15.0 8.3 29.0 23.0 5.3 15.7 15.7 7.1
38.5 17.9 24.5 16.7 11.0 32.5 26.0 7.9 15.2 17.1 7.6
41.0 20.7 27.5 19.5 11.0 35.0 29.0 7.9 15.2 17.1 7.6
44.0 23.9 30.5 22.7 11.0 38.0 32.0 7.9 15.2 17.1 7.6
51.0 29.7 37.5 28.5 11.0 45.0 39.0 7.9 15.2 17.1 7.6
Reference
Model Series
PBl MM
PBl 0M
PBl 1M
PBl 2M
PBl 3M
PBl TM
PBl 4M
PBl LM
PBl 5M
A
Ss/Sr P
N
G
2
H
3.3
9
ø C
e
PBl Fixed socket with antivibration flange, key (N) or keys (P, R, S, T, U, V, W and X),
2 holes fixing with MIL-DTL-38999L shell thread
Part number example: PBN.1M.305.XLMM
Panel cut-out (page 36).
Note: Ss = standard gender, Sr = reverse gender.
1) MIL-DTL-38999L shell size code (backshell not supplied).
Dimensions (mm)
A C e G H N P Ss Sr Code1)
29.0 16.5 M12x1.0 8.3 23.4 18.0 5.3 17.2 17.2 A
32.0 19.5 M15x1.0 8.3 26.4 21.0 5.3 17.2 17.2 B
35.0 21.5 M18x1.0 8.3 29.0 23.0 5.3 17.2 17.2 C
38.5 24.5 M18x1.0 11.0 32.5 26.0 7.9 16.2 17.1 C
41.0 27.5 M22x1.0 11.0 35.0 29.0 7.9 16.2 17.1 D
44.0 30.5 M25x1.0 11.0 38.0 32.0 7.9 16.2 17.1 E
51.0 37.5 M31x1.0 11.0 45.0 39.0 7.9 16.2 17.1 G
Reference
Model Series
PBl 1M
PBl 2M
PBl 3M
PBl TM
PBl 4M
PBl LM
PBl 5M
16 www.lemo.com
Panel cut-out (page 36).
Panel cut-out (page 36).
EDEDJJDIIE @ ‘3’”
®
®
www.lemo.com 17
PVl Fixed socket with antivibration square flange, key (N) or keys (P, R, S, T, U, V, W and X)
ø C
Ss/Sr P
G
ø C
ø B
ø D
X
N
Hø V
ø A 1.5 (MM)
2.0 (0M-5M)
Part number example: PVN.1M.305.XLM
Note: Ss = standard gender, Sr = reverse gender
Dimensions (mm)
A B C D G H N P Ss Sr V X
21.5 6.4 11.3 5.6 6.7 12.0 17.0 3.7 13.2 13.2 2.7 5.8
26.9 8.8 14.5 8.0 8.3 15.1 20.6 5.3 15.3 15.3 2.7 6.7
31.4 10.5 16.5 9.7 8.3 18.3 23.8 5.3 15.3 15.3 3.3 6.7
34.6 14.0 19.5 13.0 8.3 20.6 26.1 5.3 15.7 15.7 3.3 7.1
38.0 16.0 21.5 15.0 8.3 23.0 28.5 5.3 15.7 15.7 3.3 7.1
40.3 17.9 24.5 16.7 11.0 24.6 30.1 7.9 15.2 17.1 3.3 7.6
43.7 20.7 27.5 19.5 11.0 27.0 32.5 7.9 15.2 17.1 3.3 7.6
47.1 23.9 30.5 22.7 11.0 29.4 34.9 7.9 15.2 17.1 3.3 7.6
54.9 29.7 37.5 28.5 11.0 34.9 40.4 7.9 15.2 17.1 3.3 7.6
Reference
Model Series
PVl MM
PVl 0M
PVl 1M
PVl 2M
PVl 3M
PVl TM
PVl 4M
PVl LM
PVl 5M
PVl Fixed socket with antivibration square flange, key (N) or keys (P, R, S, T, U, V, W and X)
with MIL-DTL-38999L shell thread
ø C
Ss/Sr P
G
2
ø C
N
Hø V
ø A
e
9
Part number example: PVN.1M.305.XLMM
Panel cut-out (page 36).
Note: Ss = standard gender, Sr = reverse gender. 1) MIL-DTL-38999L shell size code
(backshell not supplied).
Dimensions (mm)
31.4 16.5 M12x1.0 8.3 18.3 23.8 5.3 17.2 17.2 3.3 A
34.6 19.5 M15x1.0 8.3 20.6 26.1 5.3 17.2 17.2 3.3 B
38.0 21.5 M18x1.0 8.3 23.0 28.5 5.3 17.2 17.2 3.3 C
40.3 24.5 M18x1.0 11.0 24.6 30.1 7.9 16.2 17.1 3.3 C
43.7 27.5 M22x1.0 11.0 27.0 32.5 7.9 16.2 17.1 3.3 D
47.1 30.5 M25x1.0 11.0 29.4 34.9 7.9 16.2 17.1 3.3 E
54.9 37.5 M31x1.0 11.0 34.9 40.4 7.9 16.2 17.1 3.3 G
A C e G H N P Ss Sr V Code1)
Reference
Model Series
PVl 1M
PVl 2M
PVl 3M
PVl TM
PVl 4M
PVl LM
PVl 5M
PVl Fixed socket with antivibration square flange, key (N) or keys (P, R, S, T, U, V, W and X) with mold stop
ø C
Ss/Sr
P
G
ø C
ø B
ø F
ø D
M
X
1.5
N
Hø V
ø A 1.5 (MM)
2.0 (0M-5M)
Part number example: PVN.1M.305.XLMT
Note: Ss = standard gender, Sr = reverse gender.
The dimension «V» is the same as the PVl models without mold stop.
Dimensions (mm)
A B C D F G H M N P Ss Sr X
21.5 6.4 11.3 5.6 7.8 6.7 12.0 8.8 17.0 3.7 16.2 16.2 5.8
26.9 8.8 14.5 8.0 10.7 8.3 15.1 9.7 20.6 5.3 18.3 18.3 6.7
31.4 10.5 16.5 9.7 12.4 8.3 18.3 9.7 23.8 5.3 18.3 18.3 6.7
34.6 14.0 19.5 13.0 15.5 8.3 20.6 10.1 26.1 5.3 18.7 18.7 7.1
38.0 16.0 21.5 15.0 17.5 8.3 23.0 10.1 28.5 5.3 18.7 18.7 7.1
40.3 17.9 24.5 16.7 19.8 11.0 24.6 10.6 30.1 7.9 18.2 18.2 7.6
43.7 20.7 27.5 19.5 22.6 11.0 27.0 10.6 32.5 7.9 18.2 18.2 7.6
47.1 23.9 30.5 22.7 25.8 11.0 29.4 10.6 34.9 7.9 18.2 18.2 7.6
54.9 29.7 37.5 28.5 31.4 11.0 34.9 10.6 40.4 7.9 18.2 18.2 7.6
Reference
Model Series
PVl MM
PVl 0M
PVl 1M
PVl 2M
PVl 3M
PVl TM
PVl 4M
PVl LM
PVl 5M
Panel cut-out (page 36).
Panel cut-out (page 36).
®
®
18 www.lemo.com
PMl Free socket, key (N) or keys (P, R, S, T, U, V, W and X) with knurled grip and mold stop
ø A
ø C
ø B
ø F
ø D
Ls/Lr
M P
X
1.5
Part number example: PMN.1M.305.XLMT
Note: Ls = standard gender, Lr = reverse gender
PMl Free socket, key (N) or keys (P, R, S, T, U, V, W and X) with knurled grip and MIL-DTL-38999L shell thread
ø A
ø C
Ls/Lr
P
e
9
Part number example: PMN.1M.305.XLMM
Note: Ls = standard gender, Lr = reverse gender.
1) MIL-DTL-38999L shell size code (backshell not supplied).
Dimensions (mm)
A C e Ls Lr P Code1)
14.6 14.2 M12x1.0 27.9 27.9 5.3 A
17.6 17.2 M15x1.0 27.9 27.9 5.3 B
19.6 19.2 M18x1.0 27.9 27.9 5.3 C
22.5 22.0 M18x1.0 29.6 30.1 7.9 C
25.0 24.5 M22x1.0 29.6 30.1 7.9 D
28.5 28.0 M25x1.0 29.6 30.1 7.9 E
34.0 33.5 M31x1.0 29.6 30.1 7.9 G
PMl Free socket, key (N) or keys (P, R, S, T, U, V, W and X) with knurled grip
ø A
ø C
ø B
ø D
Ls/Lr
X P
Part number example: PMN.1M.305.XLM
Note: Ls = standard gender, Lr = reverse gender
Dimensions (mm)
11.1 6.4 10.7 5.6 21.4 21.4 3.7 5.8
13.1 8.8 12.7 8.0 25.6 25.6 5.3 6.7
14.6 10.5 14.2 9.7 25.6 25.6 5.3 6.7
17.6 14.0 17.2 13.0 26.0 26.0 5.3 7.1
19.6 16.0 19.2 15.0 26.0 26.0 5.3 7.1
22.5 17.9 22.0 16.7 28.2 30.1 7.9 7.6
25.0 20.7 24.5 19.5 28.2 30.1 7.9 7.6
28.5 23.9 28.0 22.7 28.2 30.1 7.9 7.6
34.0 29.7 33.5 28.5 28.2 30.1 7.9 7.6
A B C D Ls Lr P X
Reference
Model Series
PMl MM
PMl 0M
PMl 1M
PMl 2M
PMl 3M
PMl TM
PMl 4M
PMl LM
PMl 5M
Dimensions (mm)
A B C D F Ls Lr M P X
11.1 6.4 10.7 5.6 7.8 24.4 24.4 8.8 3.7 5.8
13.1 8.8 12.7 8.0 10.7 28.6 28.6 9.7 5.3 6.7
14.6 10.5 14.2 9.7 12.4 28.6 28.6 9.7 5.3 6.7
17.6 14.0 17.2 13.0 15.5 29.0 29.0 10.1 5.3 7.1
19.6 16.0 19.2 15.0 17.5 29.0 29.0 10.1 5.3 7.1
22.5 17.9 22.0 16.7 19.8 31.2 31.2 10.6 7.9 7.6
25.0 20.7 24.5 19.5 22.6 31.2 31.2 10.6 7.9 7.6
28.5 23.9 28.0 22.7 25.8 31.2 31.2 10.6 7.9 7.6
34.0 29.7 33.5 28.5 31.4 31.2 31.2 10.6 7.9 7.6
Reference
Model Series
PMl MM
PMl 0M
PMl 1M
PMl 2M
PMl 3M
PMl TM
PMl 4M
PMl LM
PMl 5M
Reference
Model Series
PMl 1M
PMl 2M
PMl 3M
PMl TM
PMl 4M
PMl LM
PMl 5M
EDEDEDJIE @ I'm w HH H H H H H H H g5 H ' A & HH H H H H H H H H H :7 TH @ng HH H H H H H H
®
®
www.lemo.com 19
ø A
ø C
ø B
ø D
Ls/Lr
XP
PHl Free socket, key (N) or keys (P, R, S, T, U, V, W and X) with arctic grip
Part number example: PHN.1M.305.XLM
Note: Ls = standard gender, Lr = reverse gender
Part number example: PHN.1M.305.XLMT
Note: Ls = standard gender, Lr = reverse gender
Dimensions (mm)
A B C D Ls Lr P X
12.0 6.4 10.7 5.6 21.4 21.4 3.7 5.8
14.4 8.8 12.7 8.0 25.6 25.6 5.3 6.7
15.9 10.5 14.2 9.7 25.6 25.6 5.3 6.7
18.9 14.0 17.2 13.0 26.0 26.0 5.3 7.1
20.9 16.0 19.2 15.0 26.0 26.0 5.3 7.1
23.4 17.9 22.0 16.7 28.2 30.1 7.9 7.6
25.9 20.7 24.5 19.5 28.2 30.1 7.9 7.6
29.4 23.9 28.0 22.7 28.2 30.1 7.9 7.6
34.9 29.7 33.5 28.5 28.2 30.1 7.9 7.6
Reference
Model Series
PHl MM
PHl 0M
PHl 1M
PHl 2M
PHl 3M
PHl TM
PHl 4M
PHl LM
PHl 5M
PHl Free socket, key (N) or keys (P, R, S, T, U, V, W and X) with arctic grip and MIL-DTL-38999L shell thread
ø A
ø C
Ls/Lr
P
e
9
Part number example: PHN.1M.305.XLMM
Note: Ls = standard gender, Lr = reverse gender
1) MIL-DTL-38999L shell size code (backshell not supplied).
Dimensions (mm)
A C e Ls Lr P Code1)
15.9 14.2 M12x1.0 27.9 27.9 5.3 A
18.9 17.2 M15x1.0 27.9 27.9 5.3 B
20.9 19.2 M18x1.0 27.9 27.9 5.3 C
23.4 22.0 M18x1.0 29.6 30.1 7.9 C
25.9 24.5 M22x1.0 29.6 30.1 7.9 D
29.4 28.0 M25x1.0 29.6 30.1 7.9 E
34.9 33.5 M31x1.0 29.6 30.1 7.9 G
Reference
Model Series
PHl 1M
PHl 2M
PHl 3M
PHl TM
PHl 4M
PHl LM
PHl 5M
ø A
ø C
Ls/Lr
P
ø B
ø F
ø D
M
X
1.5
PHl Free socket, key (N) or keys (P, R, S, T, U, V, W and X) with arctic grip and mold stop
Dimensions (mm)
A B C D F Ls Lr M P X
12.0 6.4 10.7 5.6 7.8 24.4 24.4 8.8 3.7 5.8
14.4 8.8 12.7 8.0 10.7 28.6 28.6 9.7 5.3 6.7
15.9 10.5 14.2 9.7 12.4 28.6 28.6 9.7 5.3 6.7
18.9 14.0 17.2 13.0 15.5 29.0 29.0 10.1 5.3 7.1
20.9 16.0 19.2 15.0 17.5 29.0 29.0 10.1 5.3 7.1
23.4 17.9 22.0 16.7 19.8 31.2 31.2 10.6 7.9 7.6
25.9 20.7 24.5 19.5 22.6 31.2 31.2 10.6 7.9 7.6
29.4 23.9 28.0 22.7 25.8 31.2 31.2 10.6 7.9 7.6
34.9 29.7 33.5 28.5 31.4 31.2 31.2 10.6 7.9 7.6
Reference
Model Series
PHl MM
PHl 0M
PHl 1M
PHl 2M
PHl 3M
PHl TM
PHl 4M
PHl LM
PHl 5M
®
®
20 www.lemo.com
HEl Fixed socket, nut fixing, key (N) or keys (P, R, S, T, U, V, W and X), printed circuit, watertight
(back panel mounting)
e
ø A
H
ø C
Ls/Lr
P
3
R
E maxi
N
S 1
S 2
Part number example: HEN.1M.305.XLNP
Panel cut-out (page 36). PCB drilling pattern (page 37).
Note: Ls = standard gender, Lr = reverse gender. Operating temperature: -20°C to +80°C.
Watertight model (unmated)
Dimensions (mm)
A C e E H Ls Lr N P R S1 S2
14 13.8 M10x0.50 4.0 5.08 20.4 20.4 15.3 3.7 10.5 9.0 11
17 16.8 M13x0.75 5.0 5.08 20.8 21.0 16.8 5.3 13.8 11.5 14
18 17.8 M14x1.00 5.0 7.62 20.8 21.0 16.8 5.3 13.8 12.5 16
21 20.8 M17x1.00 5.0 8.89 20.8 21.0 16.8 5.3 13.8 15.5 18
23 22.8 M19x1.00 5.0 10.16 20.8 21.0 16.8 5.3 13.8 17.5 20
27 25.8 M22x1.00 4.0 12.70 24.6 24.6 19.9 7.9 16.9 20.5 23
29 27.8 M24x1.00 4.0 13.97 24.6 24.6 19.9 7.9 16.9 22.5 25
33 31.8 M28x1.00 4.0 16.51 24.6 24.6 19.9 7.9 16.9 26.5 29
38 36.8 M33x1.00 4.0 20.32 24.6 24.6 19.9 7.9 16.9 31.5 34
Reference
Model Series
HEl MM
HEl 0M
HEl 1M
HEl 2M
HEl 3M
HEl TM
HEl 4M
HEl LM
HEl 5M
D -]---II Ell-HI \lliI
®
®
www.lemo.com 21
ø A
ø C
L
P
S 1
S 2
S 1
S 2
ø A
ø C
L
P
Contact part number (to be ordered separately):
PSS.F7.12•.LCE23 (2M series).
FFS.F7.12•.LCE23 (3M and 5M series).
Note: •• Cable adaptor defined upon request.
The bend relief must be ordered separately (see page 33).
L
S 1
S 2
ø A
ø C
P
FMl Straight plug, keys (N, S or W) with knurled grip
FGl Straight plug, keys (N, S or W) with arctic grip
PMl Free socket, keys (N, S or W) with knurled grip
Dimensions (mm)
A C L P S1 S2
FM•.2M.03A.XLZT••Z
FM•.3M.95B.XLCT••Z
FM•.5M.03W.XLZT••Z
17.6 17.2 100.6 3.9 14 14
19.6 19.2 103.3 3.9 16 16
34.0 33.5 148.4 3.4 29 29
Part number
Contact part number (to be ordered separately):
PSS.F7.12•.LCE23 (2M series).
FFS.F7.12•.LCE23 (3M and 5M series).
Note: •• Cable adaptor defined upon request.
The bend relief must be ordered separately (see page 33).
Dimensions (mm)
A C L P S1 S2
FG•.2M.03A.XLZT••Z
FG•.3M.95B.XLCT••Z
FG•.5M.03W.XLZT••Z
18.9 17.2 100.6 3.9 14 14
20.9 19.2 103.3 3.9 16 16
34.9 33.5 148.4 3.4 29 29
Part number
Contact part number (to be ordered separately):
FFS.F7.12•.LCL23 (2M series).
PSS.F7.12•.LCL23 (3M and 5M series).
Note: •• Cable adaptor defined upon request.
The bend relief must be ordered separately (see page 33).
Dimensions (mm)
A C L P S1 S2
PM•.2M.03A.XLZT••Z
PM•.3M.95B.XLMT••Z
PM•.5M.03W.XLZT••Z
17.6 17.2 105.8 5.3 16 14
19.6 19.2 113.3 5.3 18 16
34.0 33.5 155.2 7.9 32 29
Part number
Fibre optic models
@ 1". III-D3331] Em
®
®
22 www.lemo.com
ø C
e
L
P
D
E maxi
S 2
S 1
ø A
ø C
P
S 1
S 2
L
ø C
ø B
L
NK
G
ø 3.3
ø A P
H
More information on F7 fibre optic contact in LEMO F7 catalog.
PHl Free socket, keys (S or W) with arctic grip
EGl Fixed socket, nut fixing, key (N) or keys (P, R, S, T, U, V, W and X)
EDl Fixed socket with square flange, keys (N, S or W)
Contact part number (to be ordered separately):
FFS.F7.12•.LCL23 (2M series).
PSS.F7.12•.LCL23 (5M series).
Note: •• Cable adaptor defined upon request.
The bend relief must be ordered separately (see page 33).
Panel cut-out (page 36).
Contact part number (to be ordered separately):
FFS.F7.12•.LCE23 (2M series).
PSS.F7.12•.LCE23 (5M series).
Dimensions (mm)
EG•.2M.03A.XLZ
EG•.5M.03W.XLZ
Part number C D e E L P S1 S2
17.2 6.8 M14x1.0 4.5 28.9 5.3 12.5 17.0
33.5 9.4 M30x1.0 4.0 30.8 7.9 28.5 36.0
Panel cut-out (page 36).
Contact part number (to be ordered separately):
FFS.F7.12•.LCE23 (2M series).
PSS.F7.12•.LCE23 (3M and 5M series).
Dimensions (mm)
A B C G H K L N P
ED•.2M.03A.XLZT
ED•.3M.95B.XLM
ED•.5M.03W.XLZT
Part number
26.9 8.95 17.2 12.8 15.1 1.5 28.9 20.6 5.3
29.0 10.95 19.2 12.8 16.6 1.5 32.2 22.1 5.3
43.7 22.90 33.5 14.5 27.0 2.0 30.8 32.5 7.9
Dimensions (mm)
A C L P S1 S2
PH•.2M.03A.XLZT••Z
PH•.5M.03W.XLZT••Z
Part number
18.9 17.2 105.8 5.3 16 14
34.9 33.5 155.2 7.9 32 29
D DEE-D11] [> ---- _ m m}: — [> ---- I -: E Mil/If
®
®
www.lemo.com 23
9/125
50/125
62.5/125
Note: Alignment device should be ordered
as replacement item.
8.2
ø 3.2
The choice of the ferrule hole diameter is dependent upon
the fibre cladding size. LEMO offers a range of ferrule hole
diameters to suit the users’ specific requirements.
lFirst choice alternative Special order alternative
Fibre Type
Accessories
See also F7 tooling in the F7 fibre optic catalog.
Tooling
Simple tool with two threaded end for installation/extraction
of the F7 contact alignment device.
Fibre optic cleaning kit of 2 cotton buds, 1 dry and
1 being soaked in Isopropyl Alcohol used for cleaning
the fibre optic contacts.
Référence ø Core/Cladding
(µm) Ferrule hole
diameter (µm) Note
125
126
128
l
l
l
125
126
128
PSS Alignment device for F7 fibre optic contact
PSS.F7.290.NZZ
Part number
DCP Set of flat spanners for collet nuts
DCS F7 contact alignment device tool
DCS.F7.035.PN
Part number
WST.KI.125.34
Part number
DCP.2M.110.TN
DCP.3M.110.TN
DCP.5M.110.TN
Part number
WST Cleaning kit
9 H1 E1 W J ‘‘‘‘‘ O 0 1 65° 30° _ 1 50° 60° _ _ 155° 50° _ 95° 1 15° 35° 25° _ _ 100° 125° 40° 20° _
®
®
24 www.lemo.com
ø 29.4
ø 28
ø 23.9
ø 25.8
ø 22.7
31.6
10.6 3.4
7.6
1.5
ø 28
M 24 x 1
40.5
7.9
4 maxi
9.4
S 22.5
31
S 30
FMl.LM.U2A.XPAT Straight plug, key (W) or key (R)
with knurled grip and mold stop FGl.LM.U2A.XPAT Straight plug, key (W) or key (R)
with arctic grip and mold stop
ø 28.5
ø 28
ø 23.9
ø 25.8
ø 22.7
31.6
10.6 3.4
7.6
1.5
ø 28
M 24 x 1
18.9
7.9
4 maxi
9.4
S 22.5
S 30
EGl.LM.U2A.XPP Fixed socket, female to female,
nut fixing, key (W) or key (R) EGl.LM.U2A.XPL Fixed socket, nut fixing,
key (W) or key (R)
Alignment Key and Polarized Keying System
M series connector model part numbers are composed of three letters. The LAST LETTER indicates the keys corresponding
to a particular contact type.
For example, straight plugs with N, P, R, U or W keys, are fitted with male contacts; whereas with S, T, V or X keys, plugs
are fitted with female contacts. Sockets with N, P, R, U or W keys, are fitted with female contacts; whereas with S, T, V or
X keys, sockets are fitted with male contacts.
165° 30°
150° 60°
130° 100°
Colour
code
3
Nb
of
keys
Model
γ
β
Front view of a socket
MM to 3M
llN
llP
llU
blue
yellow
green
male female
155° 50°
135° 90°
llS
llT
red
orange female male 3
β γ
Angles
Plug Socket
Contact type
95° 115° 35° 25°
105° 115° 30° 20°
100° 125° 40° 20°
110° 120° 35° 25°
Colour
code
5
Nb
of
keys
Model
γ
β
δ
α
Front view of a socket
TM to 5M
llW
llR
blue
yellow male female
llX
llV
red
orange female male 5
 α β γ δ
Angles
Plug Socket
Contact type
USB models
Alignment Key
® 0@ ®©O OQ O mam 00@O®@@& @0©®©® ®@@@ IIDDJDEDID @©@©@®@® @
®
®
www.lemo.com 25
Multipole
Reference
ø A
Male crimp contacts
for plug Female crimp contacts
for sockets
Number of contacts
ø A (mm)
Crimp
Print (straight)2)
AWG
Test voltage (kV rms)1)
Contact-contact
Test voltage (kV rms)1)
Contact-shell
Rated current (A)1)
Contact
type
3 0.5 l l 28-30-32 1.15 0.95 3.0
4 0.5 l l 28-30-32 0.95 0.90 2.0
2 0.9 l l 20-22-24 1.45 1.00 10.0
3 0.9 l l 20-22-24 1.70 1.40 8.0
4 0.7 l l 22-24-26 1.35 0.90 7.0
5 0.7 l l 22-24-26 1.25 1.00 6.5
2 1.3 l l 16-18-20 1.55 1.10 19.0
3 1.3 l l 16-18-20 1.05 0.95 15.5
5 0.9 l l 20-22-24 1.30 1.30 9.0
7 0.7 l l 22-24-26 1.45 1.20 7.0
8 0.7 l l 22-24-26 1.30 1.10 5.0
4 1.3 l l 16-18-20 1.55 1.35 15.5
8 0.9 l l 20-22-24 1.95 1.10 10.0
10 0.9 l l 20-22-24 1.80 1.20 8.0
12 0.7 l l 22-24-26 1.65 1.15 7.0
19 0.7 l l 22-24-26 1.20 1.00 4.0
12 0.9 l l 20-22-24 1.40 1.25 6.0
22 0.7 l l 22-24-26 1.25 1.15 4.0
30 0.7 l l 22-24-26 1.10 1.00 3.5
14
2
3
14
23
Insert configuration
MM
0M
1M
2M
3M
303
304
302
303
304
305
302
303
305
307
308
304
308
310
312
319
312
322
330
EDEDEDIIE
®
®
26 www.lemo.com
Multipole
Note: 1) Test voltage according to IEC 60512-2 test 4a. 2) For EG•, EC•, ED•, HE• socket.
ø A
Male crimp contacts
for plug Female crimp contacts
for sockets
Number of contacts
ø A (mm)
Crimp
Print (straight)2)
AWG
Test voltage (kV rms)1)
Contact-contact
Test voltage (kV rms)1)
Contact-shell
Rated current (A)1)
Contact
type
14
2
3
14
23
25 0.9 l l 20-22-24 1.10 1.25 5.0
32 0.7 l l 22-24-26 1.25 1.20 3.5
40 0.7 l l 22-24-26 1.05 1.20 3.0
TM
4M
LM
5M
Reference
325
332
340
66 0.9 l l 20-22-24 1.60 1.70 3.0
114 0.7 l l 22-24-26 1.37 1.34 2.0
366
114
40 0.7 l l 22-24-26 1.20 1.35 3.5
48 0.7 l l 22-24-26 1.10 1.35 3.0
340
348
55 0.9 l l 20-22-24 1.65 1.95 3.5
68 0.7 l l 22-24-26 1.40 1.65 2.5
355
368
Low VuHage cuntad I
®
®
www.lemo.com 27
Mixed multipole
Reference
ø A
Male crimp contacts
for plug Female crimp contacts
for sockets
Number of contacts
ø A (mm)
Crimp
Print (straight)2)
AWG
Test voltage (kV rms)1)
Contact-contact
Test voltage (kV rms)1)
Contact-shell
Rated current (A)1)
Contact
type
14
2
3
14
23
2M
1M 304
306
308
310
2 0.7 22-24-26 1.20 1.30 11.0
l l
2 1.3 16-18-20 1.45 2.00 18.5
Note: 1) Test voltage according to IEC 60512-2 test 4a. 2) For EG•, EC•, ED•, HE• socket.
Reference
Male contacts
for plug Female contacts
for sockets
FGN.1M.304.XRCT2: straight plug with key (N), 1M series, multipole type with 4 mixed contacts (2 x ø 0.7 mm and 2 x ø 1.3 mm), outer shell with mold
stop in anthracite nickel- aluminium alloy, PEEK insulator, male crimp contacts.
FGN.2M.308.XRC6: straight plug with key (N), 2M series, multipole type with 8 mixed contacts (6 x ø 0.7 mm and 2 x ø 1.3 mm), outer shell in anthracite
nickel-plated aluminium alloy, PEEK insulator, male crimp contacts.
Fibre optic No
Contact No
ø A (mm)
Crimp
Test voltage (kV rms)1)
Contact-contact
Test voltage (kV rms)1)
Contact-shell
Rated current (A)
Low Voltage contact
Contact Crimp
type contact
Multi fibre and Mixed fibre optic + LV
03A
03W
95B
2M
3M
5M
2 – –
3M
5M
316
366
10 0.7 22-24-26 0.90 0.95 2.0
l l
6 1.3 16-18-20 1.35 1.15 11.0
44 0.7 22-24-26 1.65 2.70 3.0
l l
22 1.3 16-18-20 1.95 1.80 6.0
3 0.7 22-24-26 1.55 1.40 10.5
l l
3 1.3 16-18-20 2.05 1.35 18.0
6 0.7 22-24-26 1.95 1.40 7.0
l l
2 1.3 16-18-20 1.75 1.60 23.0
8 0.7 22-24-26 1.35 1.35 6.0
l l
2 1.3 16-18-20 1.90 1.15 23.0
4 4 0.9 l 1.00 0.80 8.0
21 –
EDEDEDIIE IEI M 00 0.0 0.} EDEDEDID m:
2 0.9 22-24-26 10
l 0.75 1.05
2 1.3 16-18-20 7
1 75 C RG179
®
®
28 www.lemo.com
Crimp contacts for plugs, free or fixed sockets
ø A
ø A
ø C
ø C
Fig. 1 ø A ø C
ø A ø C
Fig. 2
Contacts
U2A 4 l1.20 0.95 n.a.
USB
Reference
Male
front view Female
front view
Number of contacts
Solder contact
Test voltage (kV rms)1)
Contact-contact
Test voltage (kV rms)1)
Contact-shell
Rated current (A)1)
LM
Reference Contact type
C
B
D
Male crimp with standard crimp barrel (fig. 1)
Male crimp with reduced crimp barrel (fig. 2)
Male straight print
Reference Contact type
M
P
N
Female crimp with standard crimp barrel (fig. 1)
Female crimp with reduced crimp barrel (fig. 2)
Female straight print
Mixed High-Speed coax
Reference
Number of contacts
ø A (mm)
Crimp contact
AWG
Test voltage (kV rms)
Contact-contact
Test voltage (kV rms)
Contact-shell
Rated current (A)
Number of contacts
Impedance (Ω)
Type
Cable
Coax
2M X04
ø A
Coax Coax
Male crimp contacts Female crimp contacts
Part number: FMN.2M.X04.XRC and EGN.2M.X04.XRM.
Note: Coaxial contacts must be ordered separately:
75 Ohms male contact FFS.2B.275.ZTCE31 (3GHz) and female contact PSS.2B.275.ZTME31(3GHz) – recommended cable Belden 179DT to reach
6GHz. For more information, please consult: https://www.lemo.com/catalog/ROW/UK_English/3GHz_75_ohms_connector_for_4k_8k_HDTV.pdf
50 Ohms male contact FFS.2B.250.ZTCE30 and female contact PSS.2B.250.ZTME30
(cable group 1, or other… see more details in coax-triax-mixed catalogue).
Contact Conduclor AWG Seclion (mm) min. ‘ max, mm ‘ max.
®
®
www.lemo.com 29
Dimension of crimp barrels
Note: In order to satisfy crimp pull-test requirements to the IEC 60352-2 standard, the use of single strand cables should be avoided.
Conductor
AWG Section (mm2)
min. max. min. max.
Contact
ø A ø C Form
(mm) (mm) per fig.
0.5 0.45 1
MM
C M
1.3 1.60 1
0.9 1.10 1
0.9 0.87 2
0.7 0.87 1
0.7 0.44 2
0M to 3M
C
C
B
C
B
M
M
P
M
P
TM to 5M
C
C
B
C
B
M
M
P
M
P
1.3 1.60 1
0.9 1.10 1
0.9 0.87 2
0.7 0.87 1
0.7 0.44 2
20 16 0.616 2.000
24 20 0.204 0.616
26 22 0.128 0.382
26 22 0.128 0.382
32 28 0.032 0.092
20 16 0.616 2.000
24 20 0.204 0.616
26 22 0.128 0.382
26 22 0.128 0.382
32 28 0.032 0.092
32 28 0.035 0.090
For male contacts For female contacts
FGN.0M.565.ZZC EGN.0M.665.ZZM
FGN.0M.560.ZZC EGN.0M.660.ZZM
FGN.0M.561.ZZC EGN.0M.661.ZZM
FGN.0M.555.ZZC EGN.0M.655.ZZM
FGN.0M.556.ZZC EGN.0M.656.ZZM
FGG.00.554.ZZC EGG.00.654.ZZM
FGN.0M.565.ZZC EGN.0M.665.ZZM
FGN.0M.560.ZZC EGW.TM.660.ZZM
FGN.0M.561.ZZC EGW.TM.661.ZZM
FGN.0M.555.ZZC EGW.TM.655.ZZM
FGN.0M.556.ZZC EGW.TM.656.ZZM
sliding loop
L
X
N
P
ø C
ø A
sliding loop
L
X
N
P
ø C
ø A
Accessories
BMF Blanking caps for plugs
BGF Blanking caps for plugs
Dimensions (mm)
BMF.MM.100.•AV
BMF.0M.100.•AV
BMF.1M.100.•AV
BMF.2M.100.•AV
BMF.3M.100.•AV
BMF.TM.100.•AV
BMF.4M.100.•AV
BMF.LM.100.•AV
BMF.5M.100.•AV
Part number
11.1 10.7 17.8 60.0 3.7 4.0
13.1 12.7 24.6 85.0 5.3 6.0
14.6 14.2 24.6 85.0 5.3 6.0
17.6 17.2 24.6 85.0 5.3 6.0
19.6 19.2 24.6 120.0 5.3 6.0
22.5 22.0 31.1 120.0 7.9 10.0
25.0 24.5 31.1 120.0 7.9 10.0
28.5 28.0 31.1 150.0 7.9 10.0
34.0 33.5 31.1 150.0 7.9 10.0
A C L N1) P X
Dimensions (mm)
BGF.MM.100.•AV
BGF.0M.100.•AV
BGF.1M.100.•AV
BGF.2M.100.•AV
BGF.3M.100.•AV
BGF.TM.100.•AV
BGF.4M.100.•AV
BGF.LM.100.•AV
BGF.5M.100.•AV
Part number
12.0 10.7 17.8 60.0 3.7 4.0
14.4 12.7 24.6 85.0 5.3 6.0
15.9 14.2 24.6 85.0 5.3 6.0
18.9 17.2 24.6 85.0 5.3 6.0
20.9 19.2 24.6 120.0 5.3 6.0
23.4 22.0 31.1 120.0 7.9 10.0
25.9 24.5 31.1 120.0 7.9 10.0
29.4 28.0 31.1 150.0 7.9 10.0
34.9 33.5 31.1 150.0 7.9 10.0
A C L N1) P X
Male Female
Ref. contact type Part number
Note: 1) the tolerance on this dimension is ± 5 mm.
Note: 1) the tolerance on this dimension is ± 5 mm.
#1,,
®
®
30 www.lemo.com
L
X P
ø C
ø A
N
ø 3.5
BGE Blanking caps for fixed sockets
Dimensions (mm)
BGE.MM.200.•AZ
BGE.0M.200.•AZ
BGE.1M.200.•AZ
BGE.2M.200.•AZ
BGE.3M.200.•AZ
BGE.TM.200.•AZ
BGE.4M.200.•AZ
BGE.LM.200.•AZ
BGE.5M.200.•AZ
Part number
12.0 10.7 19.5 60.0 5.5 4.0
14.4 12.7 23.4 85.0 3.9 6.0
15.9 14.2 23.4 85.0 3.9 6.0
18.9 17.2 23.4 85.0 3.9 6.0
20.9 19.2 23.4 120.0 3.9 6.0
23.4 22.0 31.0 120.0 3.4 10.0
25.9 24.5 31.0 120.0 3.4 10.0
29.4 28.0 31.0 150.0 3.4 10.0
34.9 33.5 31.0 150.0 3.4 10.0
A C L N1) P X
sliding loop
L
X
N
P
ø C
ø A
BMF Blanking caps for free sockets
Dimensions (mm)
BMF.MM.200.•AZ
BMF.0M.200.•AZ
BMF.1M.200.•AZ
BMF.2M.200.•AZ
BMF.3M.200.•AZ
BMF.TM.200.•AZ
BMF.4M.200.•AZ
BMF.LM.200.•AZ
BMF.5M.200.•AZ
Part number
11.1 10.7 19.5 60.0 5.5 4.0
13.1 12.7 23.4 85.0 3.9 6.0
14.6 14.2 23.4 85.0 3.9 6.0
17.6 17.2 23.4 85.0 3.9 6.0
19.6 19.2 23.4 120.0 3.9 6.0
22.5 22.0 31.0 120.0 3.4 10.0
25.0 24.5 31.0 120.0 3.4 10.0
28.5 28.0 31.0 150.0 3.4 10.0
34.0 33.5 31.0 150.0 3.4 10.0
A C L N1) P X
L
X P
ø C
ø A
N
ø 3.5
BME Blanking caps for fixed sockets
Dimensions (mm)
BME.MM.200.•AZ
BME.0M.200.•AZ
BME.1M.200.•AZ
BME.2M.200.•AZ
BME.3M.200.•AZ
BME.TM.200.•AZ
BME.4M.200.•AZ
BME.LM.200.•AZ
BME.5M.200.•AZ
Part number
11.1 10.7 19.5 60.0 5.5 4.0
13.1 12.7 23.4 85.0 3.9 6.0
14.6 14.2 23.4 85.0 3.9 6.0
17.6 17.2 23.4 85.0 3.9 6.0
19.6 19.2 23.4 120.0 3.9 6.0
22.5 22.0 31.0 120.0 3.4 10.0
25.0 24.5 31.0 120.0 3.4 10.0
28.5 28.0 31.0 150.0 3.4 10.0
34.0 33.5 31.0 150.0 3.4 10.0
A C L N1) P X
Note: 1) the tolerance on this dimension is ± 5 mm.
Note: 1) the tolerance on this dimension is ± 5 mm.
Note: 1) the tolerance on this dimension is ± 5 mm.
®
®
www.lemo.com 31
Note: 1) the tolerance on this dimension is ± 5 mm.
These caps are suitable for use with any alignment key configuration. The position «•» of the part number indicates the housing material. See page 5.
sliding loop
L
X
N
P
ø C
ø A
BGF Blanking caps for free sockets
Dimensions (mm)
BGF.MM.200.•AZ
BGF.0M.200.•AZ
BGF.1M.200.•AZ
BGF.2M.200.•AZ
BGF.3M.200.•AZ
BGF.TM.200.•AZ
BGF.4M.200.•AZ
BGF.LM.200.•AZ
BGF.5M.200.•AZ
Part number
12.0 10.7 19.5 60.0 5.5 4.0
14.4 12.7 23.4 85.0 3.9 6.0
15.9 14.2 23.4 85.0 3.9 6.0
18.9 17.2 23.4 85.0 3.9 6.0
20.9 19.2 23.4 120.0 3.9 6.0
23.4 22.0 31.0 120.0 3.4 10.0
25.9 24.5 31.0 120.0 3.4 10.0
29.4 28.0 31.0 150.0 3.4 10.0
34.9 33.5 31.0 150.0 3.4 10.0
A C L N1) P X
ø B
ø E
L
X P
ø C
ø A
N
BMK Blanking caps, large washer for ECl/PEl/HEl fixed sockets
L
X P
ø C
ø A
ø B
ø E
N
BGK Blanking caps, large washer for ECl/PEl/HEl fixed sockets
Dimensions (mm)
BMK.MM.200.•AZ
BMK.0M.200.•AZ
BMK.1M.200.•AZ
BMK.2M.200.•AZ
BMK.3M.200.•AZ
BMK.TM.200.•AZ
BMK.4M.200.•AZ
BMK.LM.200.•AZ
BMK.5M.200.•AZ
Part number A B C E L N1) P X
11.1 10.1 10.7 14.0 19.5 60.0 5.5 4.0
13.1 13.1 12.7 17.0 23.4 85.0 3.9 6.0
14.6 14.1 14.2 18.0 23.4 85.0 3.9 6.0
17.6 17.2 17.2 21.0 23.4 85.0 3.9 6.0
19.6 19.2 19.2 23.0 23.4 120.0 3.9 6.0
22.5 22.2 22.0 27.0 31.0 120.0 3.4 10.0
25.0 24.2 24.5 29.0 31.0 120.0 3.4 10.0
28.5 28.2 28.0 33.0 31.0 150.0 3.4 10.0
34.0 33.2 33.5 38.0 31.0 150.0 3.4 10.0
Dimensions (mm)
BGK.MM.200.•AZ
BGK.0M.200.•AZ
BGK.1M.200.•AZ
BGK.2M.200.•AZ
BGK.3M.200.•AZ
BGK.TM.200.•AZ
BGK.4M.200.•AZ
BGK.LM.200.•AZ
BGK.5M.200.•AZ
Part number A B C E L N1) P X
12.0 10.1 10.7 14.0 19.5 60.0 5.5 4.0
14.4 13.1 12.7 17.0 23.4 85.0 3.9 6.0
15.9 14.1 14.2 18.0 23.4 85.0 3.9 6.0
18.9 17.2 17.2 21.0 23.4 85.0 3.9 6.0
20.9 19.2 19.2 23.0 23.4 120.0 3.9 6.0
23.4 22.2 22.0 27.0 31.0 120.0 3.4 10.0
25.9 24.2 24.5 29.0 31.0 120.0 3.4 10.0
29.4 28.2 28.0 33.0 31.0 150.0 3.4 10.0
34.9 33.2 33.5 38.0 31.0 150.0 3.4 10.0
Note: 1) the tolerance on this dimension is ± 5 mm.
Note: 1) the tolerance on this dimension is ± 5 mm.
®
®
32 www.lemo.com
eL
A
øB
l Material: Nickel-plated aluminium alloy (anthracite colour)
l Material: Nickel-plated aluminium alloy (anthracite colour)
GEA Hexagonal nuts for EGl model
A
eL
ø B
GEC Conical nut for models HE l, ECl, PE l
Dimensions (mm)
GEA.00.240.RL
GEA.0S.240.RL
GEA.1M.240.RL
GEA.0E.240.RL
GEA.1E.240.RL
GEA.3S.240.RL
GEA.4M.240.RL
GEA.3E.240.RL
GEA.5M.240.RL
Part number A B e L
MM 9 10.2 M7x0.50 2.0
0M 11 12.4 M9x0.60 2.0
1M 13 14.5 M11x1.00 2.5
2M 17 19.2 M14x1.00 2.5
3M 19 21.5 M16x1.00 3.0
TM 22 25.0 M18x1.00 3.0
4M 25 28.0 M21x1.00 4.0
LM 30 34.0 M24x1.00 5.0
5M 36 40.5 M30x1.00 5.0
Series
Dimensions (mm)
GEC.MM.240.RN
GEC.0M.240.RN
GEC.0E.240.RN
GEC.2M.240.RN
GEC.3M.240.RN
GEC.TM.240.RN
GEC.4M.240.RN
GEC.LM.240.RN
GEC.5M.240.RN
Part number A B e L
Series
MM 11 14 M10x0.50 2.5
0M 14 17 M13x0.75 3.2
1M 16 18 M14x1.00 3.0
2M 18 21 M17x1.00 3.2
3M 20 23 M19x1.00 3.2
TM 23 27 M22x1.00 5.0
4M 25 29 M24x1.00 5.0
LM 29 33 M28x1.00 5.0
5M 34 38 M33x1.00 5.0
eL
A
ø B
l Material: Nickel-plated aluminium alloy (anthracite colour)
GEA Hexagonal nuts for ECl model
GEA.MM.241.RL
GEA.0M.241.RL
GEA.0E.240.RL
GEA.2M.241.RL
GEA.3M.241.RL
GEA.TM.241.RL
GEA.4M.241.RL
GEA.LM.241.RL
GEA.5M.241.RL
Part number
Dimensions (mm)
A B e L
Series
MM 12 13.5 M10x0.50 2.5
0M 16 18.2 M13x0.75 2.5
1M 17 19.2 M14x1.00 2.5
2M 19 21.5 M17x1.00 3.0
3M 25 22.0 M19x1.00 3.0
TM 25 28.0 M22x1.00 3.0
4M 30 34.0 M24x1.00 3.0
LM 32 36.0 M28x1.00 3.0
5M 37 41.0 M33x1.00 3.0
®
®
www.lemo.com 33
FGN M series constant force spring clips
AFTER HEATING
BEFORE HEATING
Straight boot
AFTER HEATING
BEFORE HEATING
Elbow boot
A bend relief made from thermoplastic polyurethane elas-
tomer can be fitted over LEMO plugs and sockets that are
supplied with nut for fitting such bend relief.
An other bend relief has been designed for connectors
used in applications at high temperature or requiring vapour
sterilization. These bend reliefs are different from previous
ones as for their material, a silicone elastomer which is
noted for its retention of flexibility over a wide temperature
range.
Main characteristics
l Material: TPU (Thermoplastic Polyurethane)
l Temperature range in dry atmosphere: -40°C +80°C
l Material: Silicone elastomer VMQ
l Temperature range in dry atmosphere: -60°C +200°C
l Temperature range in water steam: +140°C
Note:
Please see unipole/multipole catalogue for bend relief dimensions.
The last letter «G» of the part number indicates the grey colour of the
bend relief. For ordering a bend relief with another colour, see table on
the right and replace the letter «G» by the letter of the required colour.
Note:
1) modified elastomer resistant to fluids with hot melt sealant.
2) elastomer resistant to fluids. We recommend a thermosetting sealant
with this type of boot.
A range of constant force spring clips are available for use
with M Series connectors, which permits repair of cable
terminations without having to discard any of the existing
braid shield system. When used in conjunction with LEMO
heatshrink boots, a fully sealed termination is achieved.
An additional benefit of the constant force spring is that it
provides excellent resistance to shock or vibration due to
its self-tensioning properties.
Heatshrink boot
GMA Bend relief (for M series fibre optic model only)
Series
Part number
(Polyurethane) Part number
(Silicone)
GMA.2B.0••.DG 2M GMA.2B.0••.RG
GMA.3B.0••.DG 3M GMA.3B.0••.RG
GMA.4B.0••.DG 5M GMA.4B.0••.RG Ref. Colour
A blue
B white
G grey
Ref. Colour
J yellow
M brown
N black
Ref. Colour
R red
S orange
V green
Straight
Supplier Series Elbow 90°
Note
cable
ø
min.
(mm)
LEMO
Raychem®
MM GMA.10.290.DN GHA.10.210.DN 2) 2.2
0M-2M 202 A 111-25/86 222 A 111-25/86 1) 3.8
2M-4M 202 A 121-25/86 222 A 121-25/86 1) 5.3
4M-5M 202 A 142-25/86 222 A 142-25/86 1) 7.4
FGN.0M.185.AZ
FGN.3M.185.AZ
FGN.5M.185.AZ
Part number Braid grounding
location diameter (mm)
Series
0M / 1M / 2M 8.0 / 9.7 / 13.0
3M / TM 15.0 / 16.7
4M / LM / 5M 19.5 / 22.7 / 28.5
Part number
Note: Force spring clips can be assembled by hand. Do not require ad-
ditional tools.
mum —— m — —— — 4 —— — —
®
®
34 www.lemo.com
These positioners are suitable for use with both manual and pneumatic
crimping tools according to the MIL-C-22520/7-01 standard.
DCE Positioners for crimp contacts
Tooling
Note: this model is used for male
and female contacts.
Male
Female
Contact
Contact ø Size
DCE.91.130.5MVC
DCE.91.090.5MVC
DCE.91.070.5MVC
DCE.91.050.0VC
1.3 0M-5M
0.9 0M-5M
0.7 0M-5M
0.5 MM
Contact
Contact ø Size
DCE.91.130.5MVM
DCE.91.090.3MVM
DCE.91.09T.5MVM
DCE.91.070.3MVM
DCE.91.07T.5MVM
DCE.91.050.0VM
0M-5M
0M-3M
TM-5M
0M-3M
TM-5M
MM
1.3
0.9
0.7
0.5
DCF Extractors for crimp contacts
Contact
ø
DCF.93.131.4LT
DCF.93.090.4LT
DCF.93.070.4LT
DCF.91.050.2LT
Part number
1.3
0.9
0.7
0.5
DCV Female contact insertion tool
Contact
ø
DCV.13.05M.LA
DCV.09.05M.LA
DCV.07.05M.LA
DCV.05.05M.LA
Part number
1.3
0.9
0.7
0.5
Positioners part number
For male contacts
Positioners part number
For female contacts
®
®
www.lemo.com 35
Insert conical nut
Torque wrench
DCM Insert conical nut tightening tools
Torque
(Nm)
Series
DCM.65.120.AZ
DCM.65.140.AZ
DCM.65.160.AZ
DCM.65.180.AZ
DCM.65.200.AZ
DCM.65.230.AZ
DCM.65.250.AZ
DCM.65.290.AZ
DCM.65.340.AZ
DCM.65.040.8PA
DCM.65.000.4PA
MM
0M
1M
2M
3M
TM
4M
LM
5M
For models
1.0
1.0
1.5
2.0
2.5
4.0
5.0
6.5
8.0
EC, HE, PE
EC, HE, PE
EC, HE, PE
EC, HE, PE
EC, HE, PE
EC, HE, PE
EC, HE, PE
EC, HE, PE
EC, HE, PE
According to specification MIL-C-22520/7-01.
For LEMO contacts ø 0.5-0.7-0.9-1.3 mm
Note: 1) need to be ordered in addition of tool.
The banding tool is to be used with screened cables to ensure a good
ground contact.
DPC Manual crimping tool
DPC.91.701.V
Part number
Banding tool and Tie-wrap
Banding tool
Tie wrap
1)
600-061 A30199 ACDBS100
600-057 A31189 AXCL 02
Part number
GLEN-AIR® TIE-DEX® AXON®
Part number
Insert conical nut Torque wrench
<® 1.5m="" eg="" ec="" lhe="" e="" aa="" \="" b="" 0a‘="" b="" \="" l="" ed="" fa/fw/fx="" pv="" pf="" aa‘b="" aa‘b‘h="" aa‘b="" aa‘b‘h="" pe="" pb="" 9a="" s="" cm="" b="" h="">
®
®
36 www.lemo.com
ø A + 0.1
0
H + 0.1
0
H + 0.1
0
B
EDl-FAl-FWl-FXl-PVl-PFl
ø A + 0.1
0
H + 0.1
0
B
PBl
Cut-outs
Cut-outs
Series EDlFAl/FWl/FXl PVl PFl
ø A B H ø A B H ø A B H ø A B H
MM
0M
1M
2M
3M
TM
4M
LM
5M
5.0 M2.5 9.5 9.6 M2.5 12.0 11.8 M2.5 12.0 7.9 M2.5 9.5
5.1 M2.5 11.0 12.3 M2.5 15.1 15.0 M2.5 15.1 10.8 M2.5 11.0
6.1 M3.0 12.9 13.8 M3.0 18.3 17.0 M3.0 18.3 12.5 M3.0 12.9
9.1 M3.0 15.1 16.8 M3.0 20.6 20.0 M3.0 20.6 15.6 M3.0 15.1
11.1 M3.0 16.6 18.8 M3.0 20.6 22.0 M3.0 23.0 18.1 M3.0 16.6
12.5 M3.0 18.3 21.6 M3.0 23.0 25.0 M3.0 24.6 19.9 M3.0 18.3
14.1 M3.0 20.6 24.1 M3.0 24.6 28.0 M3.0 27.0 22.7 M3.0 20.6
18.1 M3.0 23.0 27.6 M3.0 27.0 31.0 M3.0 29.4 25.9 M3.0 23.0
23.2 M3.0 27.0 33.1 M3.0 29.4 38.0 M3.0 34.9 33.1 M3.0 29.4
Series PBl
ø A B H
MM
0M
1M
2M
3M
11.8 M2.5 16.2
15.0 M3.0 21.4
17.0 M3.0 23.4
20.0 M3.0 26.4
22.0 M3.0 29.0
Series PBl
ø A B H
TM
4M
LM
5M
25.0 M3.0 32.5
28.0 M3.0 35.0
31.0 M3.0 38.0
38.0 M3.0 45.0
Panel Cut-Out
Cut-outs Mounting nut torque (on panel)
L mini
B + 0.1
0
ø A
+ 0.1
0
EGl-ECl-HEl-PElSeries EGlECl/HEl/PEl
ø A B L ø A B L
MM
0M
1M
2M
3M
TM
4M
LM
5M
7.1 6.4 12.5 10.1 9.1 16.0
9.1 8.3 14.5 13.1 11.6 20.0
11.1 9.6 17.2 14.1 12.6 21.0
14.1 12.6 20.5 17.1 15.6 24.0
16.1 14.6 23.0 19.1 17.6 27.0
18.1 16.6 27.0 22.1 20.6 31.5
21.1 19.6 30.0 24.1 22.6 35.5
24.1 22.6 32.0 28.1 26.6 36.5
30.1 28.6 41.0 33.1 31.6 41.0
Series Torque (Nm)
MM
0M
1M
2M
3M
TM
4M
LM
5M
1.0
1.0
1.5
2.0
2.5
4.0
5.0
6.5
8.0
O 044—? WWW zzxmna‘h/
®
®
www.lemo.com 37
4 x ø 1 +0.1
0
For HEl models For EGl, ECl and EDl models
Fixed socket with straight print contact
4 x ø 1 +0.1
0
2 x ø 0.8 +0.1
0
ø 2.2
5.08
4 x ø 1 +0.1
0
3 x ø 0.8 +0.1
0
ø 2.3
120°
5.08
4 x ø 1 +0.1
0
4 x ø 0.8 +0.1
0
90°
ø 2.5
45°
5.08
4 x ø 1 +0.1
0
5 x ø 0.8 +0.1
0
72°
ø 2.8
5.08
4 x ø 1 +0.1
0
5 x ø 0.8 +0.1
0
72°
ø 3.4
7.62
4 x ø 1 +0.1
0
2 x ø 1.1 +0.1
0
ø 2.8
7.62
4 x ø 1 +0.1
0
3 x ø 1.1 +0.1
0
ø 3.1
7.62
120°
4 x ø 1 +0.1
0
2 x ø 0.8 +0.1
0
2 x ø 1.1 +0.1
0
ø 3.8
ø 2.8
7.62
4 x ø 1 +0.1
0
7 x ø 0.8 +0.1
0
ø 3.7
60°
30°
7.62
ø 3.8
8 x ø 0.8 +0.1
0
5
1
°
2
6
'
4 x ø 1 +0.1
0
7.62
4 x ø 1 +0.1
0
3 x ø 1.1 +0.1
0
ø 6.2
ø 5.1
3 x ø 0.8 +0.1
0
120°
60°
8.89
4 x ø 1 +0.1
0
8 x ø 0.8 +0.1
0
ø 6.4
45°
8.89
4 x ø 1 +0.1
0
6 x ø 0.8 +0.1
0
ø 6.2
5.1
2.4
2 x ø 1.1 +0.1
0
60°
8.89
60°
4 x ø 1 +0.1
0
8 x ø 0.8 +0.1
0
ø 6.2
5.1
2.4
2 x ø 1.1 +0.1
0
50°
8.89
50°
4 x ø 1 +0.1
0
10 x ø 0.8 +0.1
0
ø 6.2
ø 2.15
45°
22°30'
8.89
ø 2.8
ø 6.5
12 x ø 0.8 +0.1
0
90°
45°
45°
22°30' 4 x ø 1 +0.1
0
8.89
4 x ø 1 +0.1
0
4 x ø 1.1 +0.1
0
ø 4.8
45°
8.89
PCB drilling pattern
4 x ø 1 +0.1
0
3 x ø 0.6 +0.1
0
ø 1.35
120°
5.08
4 x ø 1 +0.1
0
ø 1.6
4 x ø 0.6 +0.1
0
90°
45°
5.08
0M.302 0M.303 0M.304 0M.305
1M.305
1M.302
1M.303 1M.304.•R 1M.307 1M.308
2M.306.•R 2M.308 2M.308.•R
2M.310.•R
2M.310 2M.312
2M.304
MM.303 MM.304
ø 3.5
ø 6.7
30°
60°
19 x ø 0.8 +0.1
0
15° 4 x ø 1 +0.1
0
8.89
2M.319
90°
45°
45°
12 x ø 0.8 +0.1
0
ø 3.4
ø 8.2
22°30' 4 x ø 1 +0.1
0
10.16
45°
22 x ø 0.8 +0.1
0
22°30'
ø 5
ø 8.8
12°52'
2
5
°
4
3
'
4 x ø 1 +0.1
0
10.16
3M.312 3M.322
6 x ø 1.1 + 0.1
0
4 x ø 1 +0.1
0
10 x ø 0.8 +0.1
0
10.16
00.9
0.9
2.1
2.1
3
3
4.45
4.45
00.9
0.9
1.8
1.8
3
3
3.9
3.9
3M.316.•R
m/ :mxnna a x my/ 40 mm? h/ w W 22w“ ‘E _‘:-5r o svzs‘w“ “a 1 ‘3 5*55‘30“ A x a 1 ‘3 ,,.7fi § ma “ 3/ ‘ 609 E o o .in L@ firmm Esxnua‘a 7 war noxana'fl
®
®
38 www.lemo.com
36°
30 x ø 0.8 +0.1
0
2.2
ø 5.7
4.45
2.6
3.23
11°15'
ø 9
2
2
°
3
0
'
4 x ø 1 +0.1
0
10.16
4 x ø 1 +0.1
0
15°
22 x ø 1.1 +0.1
0
44 x ø 0.8 +0.1
0
ø 6.6
ø 10.4
45°
45°
22°30'
ø 3
ø 14
ø 20
20.32
9°
18°
30°
16°21’49’’
4 x ø 1 +0.1
0
114 x ø 0.8 + 0.1
0
5°
6°12’25’’
10°
ø 9.9
ø 6.3
ø 13.5
ø 17.1
8°10’55’’
1
2
0
°
20.32
ø 20.7
2
4
°
ø 2.7
1
2
°
2
4
5
0
1
6
°
2
1
4
9
4 x ø 1 +0.1
0
55 x ø 0.8 +0.1
0
ø 2.8
10°35’18’
18°
ø 6.9
ø11.1
ø15.3
16.51
7°30’
2
1
°
1
0
3
5
3
6
°
1
5
°
4 x ø 1 +0.1
0
68 x ø 0.8 +0.1
0
ø 4.25
13°51’
51°25’30’
ø 8
ø11.75
ø15.5
16.51
6°40’
2
7
°
4
1
3
0
1
8
°
1
3
°
2
0
48 x ø 0.8 +0.1
0
ø 11.9
24°
ø 5.2
ø 8.5
ø 1.9
22°30'
8°10'55''
12°
4
5
°
4 x ø 1 +0.1
0
13.97
1
6
°
2
1
'
4
9
'
'
1
2
0
°
25 x ø 0.8 +0.1
0
ø 9.8
ø 5.8
24°
40°
4 x ø 1 +0.1
0
12.7
32 x ø 0.8 +0.1
0
ø 10.2
ø 3
11°15'
71°51'52''
ø 6.6
4 x ø 1 +0.1
0
12.7
2
2
°
3
0
'
3
2
°
4
3
'
3
8
'
'
40 x ø 0.8 +0.1
0
ø 11.64
51°26'
18°
9°
ø 4.24
ø 7.94
4 x ø 1 +0.1
0
13.97
2
7
°
4
1
'
3
2
'
'
3M.330
5M.366.•R 5M.114
LM.355 LM.368
TM.325 TM.332
4M.3484M.340
40 x ø 0.8 +0.1
0
ø 10.2
60°
18°
9°
ø 3.4
ø 6.8
4 x ø 1 +0.1
0
12.7
2
7
°
4
1
'
3
2
'
'
TM.340
4 x ø 1 +0.1
0
6°55'30''
66 x ø 0.8 +0.1
0
ø 5.6
ø 10.08
27°41'30''
18°57'
ø14.96
ø19.84
1
3
°
5
1
'
5
1
°
2
6
'
20.32
5M.366
®
®
www.lemo.com 39
Assembly instructions for plugs and sockets
2
21
1
FG
PH
PB
1. Cable preparation
First place the heatshrink boot
over the cable. Strip the cable
accor ding to dimensions of the
table, then widen the shield.
2. Cable termination
2.1 With shielded cables, widen and pull the shield all the way to the back.
Fix the appropriate positioner onto the crimping tool and set the selec-
tor to the number corresponding to the AWG of the conductor used as
indicated on the positioner label.
Fit the conductor into the contact ; make sure it is visible through the
contact’s inspection hole.
Slide the conductor-contact assembly into the open crimping tool;
make sure that the contact is pushed fully into the positioner. Close the
tool. Remove from crimping tool and check that conductor is secure in
contact and shows in inspection hole.
2.2 Arrange the conductor-contact assemblies according to the markings,
into the rear cable seal.
Push them deeply into the insulator, using tweezers if necessary;
check that all the contacts are correctly located in the insulator: 1) by
verifying the alignment of the contacts at the front of the insulator and
2) by gently pulling on each conductor.
Verification should also be made using the appropriate retention
testing tool.
2.3 Bring the shield around the rear of connector.
Secure it with a band-it tie-wrap (not furnished) to fix the shield in place.
Cut off the possible shield surplus.
2.4 Put the heatshrink boot in place and heat gently until it retracts.
1
T ± 0.2
L ± 0.5
S ± 0.5
Crimp
2
Crimp
2
Steel tie-wrap band (~3 mm wide)
Steel tie-wrap band (~3 mm wide)
Heat Heat
Note: dimensions are in mm.
Series L S T
MM
0M to 5M
14 9 3.0
20 15 3.5
®
®
40 www.lemo.com
Assembly instructions for plugs and sockets (with optional mold stop)
1
1
FG
PH
PB
T ± 0.2
L ± 0.5
S ± 0.5
Crimp
1
Crimp
1
Steel tie-wrap band (~3 mm wide)
Steel tie-wrap band (~3 mm wide)
Overmolding
Overmolding
1. Cable preparation
Strip the cable accor ding to dimen-
sions of the table, then widen the
shield.
2. Cable termination
2.1 With shielded cables, widen and pull the shield all the way to the back.
Fix the appropriate positioner onto the crimping tool and set the selec-
tor to the number corresponding to the AWG of the conductor used as
indicated on the positioner label.
Fit the conductor into the contact ; make sure it is visible through the
contact’s inspection hole.
Slide the conductor-contact assembly into the open crimping tool;
make sure that the contact is pushed fully into the positioner. Close the
tool. Remove from crimping tool and check that conductor is secure in
contact and shows in inspection hole.
2.2 Arrange the conductor-contact assemblies according to the markings,
into the rear cable seal.
Push them deeply into the insulator, using tweezers if necessary;
check that all the contacts are correctly located in the insulator:
1) by verifying the alignment of the contacts at the front of the insu-
lator and 2) by gently pulling on each conductor.
Verification should also be made using the appropriate retention tes-
ting tool.
2.3 Bring the shield around the rear of connector until the mold stop.
Secure it with a band-it tie-wrap (not furnished) to fix the shield in place.
Cut off the possible shield surplus.
2.4 Custom overmold cable assembly.
Note: dimensions are in mm.
Series L S T
MM
0M to 5M
14 9 3.0
20 15 3.5
KINGC€ 9 (6 me opea (6 PRO e Ii Aw Prop
®
®
www.lemo.com 41
LEMO works constantly to improve the quality of its products; the information and illustrations figuring in this document may
therefore vary and are not binding. In any case, LEMO makes no specific warranty of merchantability, fitness for a particu-
lar purpose, third party components as such or included in assembly, non-infringement, title, accuracy, completeness, or
security. The user is fully responsible for his products and applications using LEMO component.
In no event shall LEMO, its affiliates, officers, agents or employees be liable for any incidental, indirect, special or conse-
quential damages in connection with the products or services provided by LEMO, including (without limitation) loss of profits
or revenues, interruption of business, loss of use of the products or any associated equipment, materials, components or
products, damages to associated equipment or in combination with other components, materials.
Reproduction of significant portions of LEMO information in LEMO data books or data sheets is permissible only if repro-
duction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. LEMO is
not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions.
Disclaimers
No reproduction or use without express permission of editorial or pictorial content, in any manner.
LEMO SA reserves the right to modify and improve specifications, at all times, without any notification.
PLEASE READ AND FOLLOW ALL INSTUCTIONS CAREFULLY AND CONSULT ALL RELEVENT NATIONAL AND
INTERNATIONAL SAFETY REGULATIONS FOR YOUR APPLICATION.
IMPROPER HANDLING, CABLE ASSEMBLY, OR WRONG USE OF CONNECTORS CAN RESULT IN HAZARDOUS
SITUATIONS.
1. SHOCK AND FIRE HAZARD
Incorrect wiring, the use of damaged components, presence of foreign objects (such as metal debris), and / or residue
(such as cleaning fluids), can result in short circuits, overheating, and / or risk of electric shock.
Mated components should never be disconnected while live as this may result in an exposed electric arc and local
overheating, resulting in possible damage to components.
2. HANDLING
Connectors and their components should be visually inspected for damage prior to installation and assembly. Suspect
components should be rejected or returned to the factory for verification.
Connector assembly and installation should only be carried out by properly trained personnel. Proper tools must be used
during installation and / or assembly in order to obtain safe and reliable performance.
3. USE
Connectors with exposed contacts should never be live (or on the current supply side of a circuit). Under general
conditions voltages above 30 VAC and 42 VDC are considered hazardous and proper measures should be taken to
eliminate all risk of transmission of such voltages to any exposed metal part of the connector.
4. TEST AND OPERATING VOLTAGES
The maximum admissible operating voltage depends upon the national or international standards in force for the
application in question. Air and creepage distances impact the operating voltage; reference values are indicated in the
catalog however these may be influenced by PC board design and / or wiring harnesses.
The test voltage indicated in the catalog is 75% of the mean breakdown voltage; the test is applied at 500 V/s and the
test duration is 1 minute.
5. CE MARKING
CE marking means that the appliance or equipment bearing it complies with the protection requirements of one or
several European safety directives.
CE marking applies to complete products or equipment, but not to electromechanical components, such as
connectors.
6. PRODUCT IMPROVEMENTS
The LEMO Group reserves the right to modify and improve to our products or specifications without providing prior
notification.
7. WARNING (Prop 65 State of California)
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that
cause cancer, birth defects or other reproductive harm. LEMO products are exempt from proposition 65 warnings because
they are manufactured, marketed, and sold solely for commercial and industrial use. For further information, please visit
https://www.lemo.com/quality/LEMO-Prop-65-compliance-declaration.pdf.
Product safety notice
LEMO HEADQUARTERS
SWITZERLAND
LEMO SA
Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-1024 Ecublens
Tel. (+41 21) 695 16 00 - Fax (+41 21) 695 16 02 - e-mail: info@lemo.com
LEMO SUBSIDIARIES
LEMO DISTRIBUTORS
ARGENTINA, AUSTRALIA, BRAZIL, CHILE, COLOMBIA, CZECH REPUBLIC,
GREECE, INDIA, ISRAEL, NEW ZEALAND, PERU, POLAND, RUSSIA,
SOUTH AFRICA, SOUTH KOREA, TAIWAN, TURKEY, UKRAINE
www.lemo.com
AUSTRIA
LEMO Elektronik GesmbH
Lemböckgasse 49/E6-3
1230 Wien
Tel: (+43 1) 914 23 20 0
Fax:(+43 1) 914 23 20 11
sales@lemo.at
BRAZIL
LEMO Latin America Ltda
Av. José Rocha Bonfim,
214 Salas 224 / 225
Condomínio Praça Capital
Ed. Chicago
Campinas / SP - Brasil 13080-650
Tel: +55 (11) 98689 4736
info-la@lemo.com
CANADA
LEMO Canada Inc
44 East Beaver Creek Road, unit 20
Richmond Hill, Ontario L4B 1G8
Tel: (+1 905) 889 56 78
Fax: (+1 905) 889 49 70
info-canada@lemo.com
CHINA / HONG KONG
LEMO Electronics (Shanghai) Co., Ltd
First Floor, Block E,
18 Jindian Road, Pudong
Shanghai, China, 201206
Tel: (+86 21) 5899 7721
Fax: (+86 21) 5899 7727
cn.sales@lemo.com
DENMARK
LEMO Denmark A/S
Mandal Allé 16A
5500 Middelfart
Tel: (+45) 45 20 44 00
Fax: (+45) 45 20 44 01
info-dk@lemo.com
FRANCE
LEMO France Sàrl
24/28 Avenue Graham Bell
Bâtiment Balthus 4
Bussy Saint Georges
77607 Marne la Vallée Cedex 3
Tel: (+33 1) 60 94 60 94
Fax: (+33 1) 60 94 60 90
info-fr@lemo.com
GERMANY
LEMO Elektronik GmbH
Hanns-Schwindt-Str. 6
81829 München
Tel: (+49 89) 42 77 03
Fax: (+49 89) 420 21 92
info@lemo.de
HUNGARY
REDEL Elektronika Kft
Nagysándor József u. 6-12
1201 Budapest
Tel: (+36 1) 421 47 10
Fax: (+36 1) 421 47 57
info-hu@lemo.com
ITALY
LEMO Italia srl
Viale Lunigiana 25
20125 Milano
Tel: (+39 02) 66 71 10 46
Fax: (+39 02) 37 90 80 46
sales.it@lemo.com
JAPAN
LEMO Japan Ltd
2-7-22, Mita,
Minato-ku, Tokyo, 108-0073
Tel: (+81 3) 54 46 55 10
Fax: (+81 3) 54 46 55 11
lemoinfo@lemo.co.jp
MIDDLE EAST
LEMO Middle East Connectors LLC
Concorde Tower 6th Floor,
Dubai Media City, P.O. Box 126732
Dubai, United Arab Emirates
Tel: +971 55 222 36 77
info-me@lemo.com
NETHERLANDS / BELGIUM
LEMO Connectors Nederland B.V.
Jacques Meuwissenweg 6
2031 AD Haarlem
Tel. +31 23 206 07 01
info-nl@lemo.com
NORWAY / ICELAND
LEMO Norway A/S
Soerumsandvegen 69,
1920 Soerumsand
Tel: (+47) 22 91 70 40
Fax: (+47) 22 91 70 41
info-no@lemo.com
SINGAPORE
LEMO Asia Pte Ltd
4 Leng Kee Road,
#06-09 SiS Building
Singapore 159088
Tel: (+65) 6476 0672
Fax: (+65) 6474 0672
sg.sales@lemo.com
SPAIN / PORTUGAL
IBERLEMO SAU
Brasil, 45, 08402 Granollers
Barcelona
Tel: (+34 93) 860 44 20
Fax: (+34 93) 879 10 77
info-es@lemo.com
SWEDEN / FINLAND
LEMO Nordic AB
Gunnebogatan 30, Box 8201
163 08 Spånga
Tel: (+46 8) 635 60 60
Fax: (+46 8) 635 60 61
info-se@lemo.com
SWITZERLAND
LEMO Verkauf AG
Grundstrasse 22 B, 6343 Rotkreuz
Tel: (+41 41) 790 49 40
ch.sales@lemo.com
UNITED KINGDOM
LEMO UK Ltd
12-20 North Street, Worthing,
West Sussex, BN11 1DU
Tel: (+44 1903) 23 45 43
lemouk@lemo.com
USA
LEMO USA Inc
P.O. Box 2408
Rohnert Park, CA 94927-2408
Tel: (+1 707) 578 88 11
(+1 800) 444 53 66
Fax:(+1 707) 578 08 69
info-US@lemo.com
CAT.MM.LEN.P0811, © LEMO / Data subject to change, printed in Switzerland, updated August 2019

Products related to this Datasheet

CONN BLANKING COVER SILVER
CONN BLANKING COVER SILVER
CONN BLANKING COVER SILVER
CONN CAP FOR .0M. RCPT IP50
CONN BLANKING COVER
CONN BLANKING COVER
CONN RCPT FMALE 5POS GOLD CRIMP
CONN RCPT FMALE 10POS GOLD CRIMP
CONN RCPT FMALE 19POS GOLD CRIMP
CONN PLUG MALE 5POS GOLD CRIMP
CONN PLUG MALE 8POS GOLD CRIMP
CONN PLUG MALE 19POS GOLD CRIMP
CONN PLUG FMALE 5POS GOLD CRIMP
CONN PLUG MALE 68POS GOLD CRIMP
CONN PLUG MALE 3POS GOLD CRIMP
CONN PLUG MALE 5POS GOLD CRIMP
CONN PLUG MALE 8POS GOLD CRIMP
CONN PLUG MALE 8POS GOLD CRIMP
CONN PLUG MALE 10POS GOLD CRIMP
CONN PLUG MALE 12POS GOLD CRIMP
CONN PLUG MALE 19POS GOLD CRIMP
CONN PLUG MALE 30POS GOLD CRIMP
CONN PLUG MALE 114POS GOLD CRIMP
CONN RCPT FMALE 8POS GOLD SOLDER
CONN RCPT FMALE 8POS GOLD SOLDER
CONN RCPT FMALE 12POS GOLD SLDR
CONN RCPT FMALE 30POS GOLD SLDR
CONN RCPT FMALE 114POS SOLDER
CONN RCPT FMALE 68POS GOLD SLDR
CONN RCPT FMALE 3POS GOLD CRIMP
CONN RCPT FMALE 5POS GOLD CRIMP
CONN RCPT FMALE 8POS GOLD CRIMP
CONN RCPT FMALE 10POS GOLD CRIMP
CONN RCPT FMALE 12POS GOLD CRIMP
CONN RCPT FMALE 19POS GOLD CRIMP
CONN RCPT MALE 5POS GOLD CRIMP
CONN RCPT FMALE 8POS GOLD CRIMP
CONN PLUG MALE 4POS GOLD CRIMP
CONN BLANKING COVER
CONN BLANKING COVER
CONN BLANKING COVER
CONN BLANKING COVER
CONN BLANKING COVER
CONN RCPT FMALE 4POS GOLD CRIMP
CONN RCPT FMALE 5POS GOLD SOLDER
CONN RCPT FMALE 8POS GOLD CRIMP
CONN RCPT FMALE 68POS GOLD CRIMP
CONN RCPT FMALE 4POS GOLD CRIMP
CONN RCPT FMALE 8POS GOLD CRIMP
CONN RCPT FMALE 10POS GOLD CRIMP
CONN RCPT MALE 4POS GOLD CRIMP
CONN RCPT MALE 8POS GOLD CRIMP
CONN PLUG MALE 5POS GOLD CRIMP
CONN PLUG MALE 5POS GOLD CRIMP
CONN PLUG MALE 8POS GOLD CRIMP
CONN PLUG MALE 8POS GOLD CRIMP
CONN PLUG MALE 10POS GOLD CRIMP
CONN PLUG MALE 19POS GOLD CRIMP
CONN PLUG MALE 30POS GOLD CRIMP
CONN PLUG MALE 12POS GOLD CRIMP
CONN PLUG MALE 19POS GOLD CRIMP
CONN PLUG FMALE 3POS GOLD CRIMP
CONN PLUG FMALE 4POS GOLD CRIMP
CONN PLUG FMALE 5POS GOLD CRIMP
CONN PLUG FMALE 12POS GOLD CRIMP
CONN PLUG FMALE 19POS GOLD CRIMP
CONN PLUG MALE 40POS GOLD CRIMP
CONN PLUG MALE 114POS GOLD CRIMP
CONN PLUG MALE 3POS GOLD CRIMP
CONN PLUG MALE 7POS GOLD CRIMP
CONN PLUG FMALE 5POS GOLD CRIMP
CONN RCPT FMALE 4POS GOLD SOLDER
CONN RCPT FMALE 7POS GOLD SOLDER
CONN RCPT FMALE 10POS GOLD SLDR
CONN RCPT FMALE 19POS GOLD SLDR
CONN RCPT MALE 3POS GOLD SOLDER
CONN RCPT MALE 5POS GOLD SOLDER
CONN RCPT MALE 8POS GOLD SOLDER
CONN RCPT FMALE 40POS GOLD SLDR
CONN RCPT FMALE 5POS GOLD CRIMP
CONN RCPT FMALE 19POS GOLD CRIMP
CONN RCPT FMALE 5POS GOLD CRIMP
CONN RCPT FMALE 7POS GOLD CRIMP
CONN RCPT MALE 3POS GOLD CRIMP
CONN RCPT FMALE 68POS GOLD CRIMP
CONN RCPT FMALE 4POS GOLD CRIMP
CONN RCPT FMALE 12POS GOLD CRIMP
CONN RCPT FMALE 19POS GOLD CRIMP
CONN RCPT FMALE 19POS GOLD CRIMP
CONN RCPT MALE 12POS GOLD CRIMP
CONN RCPT MALE 19POS GOLD CRIMP
TOOL POSITIONER FOR CRIMP PIN
CONN PLUG MALE 4POS GOLD CRIMP
CONN PLUG MALE 7POS GOLD CRIMP
CONN PLUG MALE 8POS GOLD CRIMP
CONN PLUG MALE 8POS GOLD CRIMP
CONN BLANKING COVER
CONN BLANKING COVER
CONN BLANKING COVER
TOOL SPANNER
FRONT CONICAL NUT
FRONT CONICAL NUT
FRONT CONICAL NUT
FRONT CONICAL NUT
CONN RCPT FMALE 4POS GOLD CRIMP