Hand and Crimping Tools Datasheet by JST Sales America Inc.

View All Related Products | Download PDF Datasheet
935934
Extraction tool
Terminals and parts model
number in alphabetical order
Insertion tool
Hand tools Hand tools
for chain terminals for loose piece terminals for loose piece terminals
Extraction and Insertion tools
YRS
series YC
series
Insertion tool allows contacts be inserted
in the housing.
This tool greatly increases efficiency especially
when thin wires are used.
Extraction tool is used to extract
contacts improperly inserted in the housing.
Note: (1) These tools are for prototype tooling or repair.
(2) YC tool has two crimping sections (A and B). YRS tool has also two crimping sections by inverting upper dies.
Be sure to check applicable wires before use. Since the dies are fixed, the crimping height cannot be adjusted. Therefore, some of the
applicable wires described in this catalog may not be crimped properly.
Before use, check for proper crimping (such as tensile strength, terminal/contact deformation).
(3) These tools are not applicable to 2-wire crimping.
(4) When hand crimping board-in terminals (SAN, SCN, SDN, SGN, SIN, SJN, SZN), care should be taken not to contaminate the solder tails of
the terminals, as with greasy or oily fingers. If a solder problem arises, some cleaning of the tips of the terminal is advisable.
(5) WC and JUC hand tools are provided by J.S.T.(U.K.) LTD. and contact them about the details of these hand tools.
Dimensions:
(W x L) 59X224mm (2.3" x 8.8") Dimensions:
(W x L) 70X296mm (2.8" x 11.7")
YRM
series
Dimensions:
(W x L) 59X224mm (2.3" x 8.8")
YRF
series
Dimensions:
(W x L) 70X295mm (2.8" x 11.6")
80X305mm (3.1" x 12.0")
YRS series YC series YRM series YRF series WC & JUC series
JUK's Hand Tools
Terminal in loose form
model No.
CN-SAP/S1 YRS-870 – – – – –
JK-SP2*** YRS-370 – – – – – KEJ-0.7
JK-SS2*** YRS-370 – – – – – KEJ-0.4
J-SP1*** YRS-440 YC-440 – J-BP1*** DEJ-0.3
J-SS1*** YRS-440 YC-440 – J-BP1*** DEJ-0.3
J-SP2*** YRS-330 – – – – – DEJ-0.3
J-SS2*** YRS-330 – – – – – DEJ-0.3
LFO-1.0-250N –––– JUCS-FO –
LFO-2.5-250N –––– JUCS-FO –
MD-SP12** YRS-470 – – – – – MEJ-06
MD-SP22** YRS-460 – – – – – MEJ-06
RA-SC1290
YRS-231
– RA-BC12** EJ-RA
RF-SC22** – YRM-230 – RF-BC22**
RPJ-SP/SS2331 YRS-331 – – – – –
UBB-SP1110 YRS-951 – – – – –
UBB-SP2110 YRS-950 – – – – –
SAA-21(T)-** – YC-141 – LAA-21(T-)**
SAA-50(T)-** – YC-182 – LAA-50(T)-**
SAA-51(T)-** – YC-142 – LAA-51(T)-**
SAB-51(T)-** – YC-142 – LAB-51(T)-**
SAGH-002GU-P0.3 YRS-858 – – – – –
SAN-002T-0.8A YRS-220 – – – – – EJ-PH
SAN-002T-0.8K YRS-220 – – – – – EJ-PH
SBH-001T-P0.5 – YC-670R WC-670 BBH-001T-P0.5
SBHL-002T-P0.5 YRS-857 – – – – –
SBHM-001T-P0.5 – YC-670R – BBHM-001T-P0.5
SBHS-002T-P0.5A YRS-852 – – – – –
SBHSM-002T-P0.5 YRS-854 – – – – –
YRM-232
(for AWG #26, #24)
YRM-233
(for AWG #24, #22)
Crimping tools
H
and tools
Crimping tools
5-A
JST .IST
937936
Extraction tool
Terminals and parts model
number in alphabetical order
Insertion tool
Hand tools Hand tools
for chain terminals for loose piece terminals for loose piece terminals
Extraction and Insertion tools
YRS series YC series YRM series YRF series WC & JUC series
JUK's Hand Tools
Terminal in loose form
model No.
SBHT-002T-P0.5 – – – – – EJ-BHT IT-BHT
SCN-001T-1.0K YRS-191 YC-191R WC-191 BCN-001T-1.0K
SCN-001T-P1.0 YRS-191 YC-191R WC-191 BCN-001T-P1.0
SCS-41T-2.3 –––– ––CSJ-23 –
SCZH-002T-P0.5 YRS-492 – – – – –
SDF-01T-1.0A – YC-045 – LDF-01T-1.0A
SDF-01T-1.3AS – YC-045 – LDF-01T-1.3AS
SDN-21T-P1.5 – YC-600R – BDN-21T-P1.5
SDY-01T-P1.6ASV – YC-525R – SLJ-1.4
SEH-001T-P0.6 YRS-260 YC-260R WC-260 BEH-001T-P0.6
SF3F-002GF-P2.0 – YRF-882 – BF3F-002GF-P2.0 EJ-JFAJ3 –
SF3F-01GF-P2.0 – YRF-881 – BF3F-01GF-P2.0 EJ-JFAJ3 –
SF3M-01GF-M2.0N – YRF-881 – BF3M-01GF-M2.0N EJ-JFAJ3 –
SF3F-41GF-P2.0 – YRF-880 – LF3F-41GF-P2.0 EJ-JFAJ3 –
SF3M-41GF-M2.0N – YRF-880 – LF3M-41GF-M2.0N EJ-JFAJ3 –
SF3F-71GF-P2.0 – YRF-1070 – BF3F-71GF-P2.0
SF3M-71GF-M2.0N – YRF-1071 – BF3M-71GF-M2.0N
SFO-41(T)-187N – YC-271 – LFO-41(T)-187N
SFO-61(T)-250A – YC-270 – LFO-61(T)-250A
SFPS-61(T)-250 – YC-272 – LFPS-61(T)-250
SFT-61T-250N – YC-510 – LFT-61T-250N
SGF-41(T)-4 – YC-055 – LGF-41(T)-4
SGF-51(T)-5 – YC-065 – LGF-51(T)-5
SGF-51(T)-5A – YC-065 – LGF-51(T)-5A
SGM-51(T)-4 – YC-056 – LGM-51(T)-4
SGM-51(T)-5 – YC-056 – LGM-51(T)-5
SHCM-A03T-P025 YRS-960 – – – WC-SHCM-A03
SHF-001T-0.8BS YRS-122 YC-122R WC-122 BHF-001T-0.8BS
SHF-002T-0.8BS YRS-300 – – – – –
SHR-001T-P0.6 YRS-580 YC-580R – BHR-001T-P0.6
SIM-01(T)-110A – YC-054 – LIM-01(T)-110A
SIM-1.0-250D/N –––– JUCS-IM –
SIM-2.5-250D/N –––– JUCS-IM –
SIM-41(T)-110B – YC-067 – LIM-41(T)-110B
SIM-51(T)-250N – YC-321 – LIM-51(T)-250N
SIN-001T-1.2 YRS-034 – – – – –
SIN-002T-1.0S YRS-035 – – – – –
SIN-01T-1.2 – YC-340R – LIN-01T-1.2
SIN-01T-1.8 – YC-032 – LIN-01T-1.8
SIN-21T-1.8 – YC-350 – LIN-21T-1.8
SIN-21T-1.8S – LIN-21T-1.8S
SIN-61T-2.6S – LIN-61T-2.6S
YC-560
(for UL1015 AWG #14)
YC-570
(for UL1015 AWG #22, #20)
YC-571
(for UL1015 AWG #18)
YRS-856
(UL3443 AWG #28, UL3239 AWG #24)
YRS-857
(UL3443 AWG #26, UL10267 AWG #26)
Crimping tools
Crimping tools
JST .IST
939938
Extraction tool
Terminals and parts model
number in alphabetical order
Insertion tool
Hand tools Hand tools
for chain terminals for loose piece terminals for loose piece terminals
Extraction and Insertion tools
YRS series YC series YRM series YRF series WC & JUC series
JUK's Hand Tools
Terminal in loose form
model No.
SIN-81T-3.6S – YC-940 – LIN-81T-3.6S
SJ2F-002GF-P1.0 YRS-8851 – – – – –
SJ2M-002GF-M1.0 YRS-8851 – – – – –
SJ2F-01GF-P1.0 YRS-8861 – – – – –
SJ2M-01GF-M1.0N YRS-8861 – – – – –
SJ2M-01GF-M1.0S YRS-8861 – – – – –
SJ2F-21GF-P1.0 – YRF-1120 – LJ2F-21GF-P1.0
SJ2M-21GF-M1.0N – YRF-1120 – LJ2M-21GF-M1.0N
SJ5F-71GF-P6.5 – YRF-888 – LJ5F-71GF-P6.5
SJ5M-71GF-M6.5 – YRF-888 – LJ5M-71GF-M6.5
SJ5F-81GF-P6.5 – YRF-889 – LJ5F-81GF-P6.5
SJ5M-81GF-M6.5 – YRF-889 – LJ5M-81GF-M6.5
SJN-002PT-0.9 YRS-036 – – – – –
SLC-21T-2.0 – YC-310 WC-310 LLC-21T-2.0
SLF/M-01T-P1.3E YC-202 WC-202 LLF/M-01T-P1.3E LEJ-13 LIT-2013
SLF/M-41T-P1.3E YC-203 WC-203 LLF/M-41T-P1.3E LEJ-13
SMF-01T-1.0 – YC-081 – LMF-01T-1.0
SMF-01T-1.3 – YC-082 – LMF-01T-1.3
SMM-003T-0.5 YRS-800 – – – WC-800
SMR-001T-0.6 YRS-580 YC-580R BMR-001T-0.6 HRWJ
SOM-21(T)-187 – YC-680 – LOM-21(T)-187
SOM-51(T)-250 – YC-066 WC-066 LOM-51(T)-250
SPA-001T-P0.5 – BPA-001T-P0.5
SPAL-001T-P0.5 – BPAL-001T-P0.5
SPB-1.0-250N-S –––– JUCS-PB –
SPB-2.5-250N-S –––– JUCS-PB –
SPF-01T-2.5C – YC-043R – LPF-01T-2.5C
SPH-001T-P0.5L YRS-245 – – – – –
SPH-002T-P0.5L YRS-241 – – – – – EJ-PH
SPH-002T-P0.5S YRS-240 YRM-240 WC-240 BPH-002T-P0.5S EJ-PH
SPH-004T-P0.5S YRS-243 – – – – – EJ-PH
SPHD-001T-P0.5 WC-610 BPHD-001T-P0.5 EJ-PHD
SPHD-002T-P0.5 YRS-620 YRM-620 WC-620 BPHD-002T-P0.5 EJ-PHD
SPND-001T-C0.5 YRS-1091 – – – – –
SPND-002T-C0.5 YRS-1090 – – – – –
SPS-01T-110 – YC-740 WC-740 LPS-01T-110
SPS-01T-187(-8)
YC-730
(for AWG #26, #22) WC-730 LPS-01T-187(-8) EJ-PS187
YC-731
(for AWG #24, #20)
SPS-21T-250(-5) – YC-760 – LPS-21T-205(-5)
SPS-21T-250 YC-780 WC-780 LPS-21T-250 EJ-PS250
YC-610R
(for AWG #26, #24)
YC-611R
(for UL1007 AWG #24, UL1061 AWG #22)
YC-610R
(for AWG #26, #24)
YC-611R
(for UL1007 AWG #24, UL1061 AWG #22)
YC-610R
(for AWG #26, #24)
YC-611R
(for UL1007 AWG #24, UL1061 AWG #22)
Crimping tools
Crimping tools
JST .IST
941940
Extraction tool
Terminals and parts model
number in alphabetical order
Insertion tool
Hand tools Hand tools
for chain terminals for loose piece terminals for loose piece terminals
Extraction and Insertion tools
YRS series YC series YRM series YRF series WC & JUC series
JUK's Hand Tools
Terminal in loose form
model No.
SPS-21T-250S YC-780 WC-780 LPS-21T-250S EJ-PS250
SPS-41T-110 YC-750 (for AWG #20, #18) WC-750 LPS-41T-110
YC-751 (for AWG #16)
SPS-51T-187(-8)
YC-710
(for AWG #20, #16) WC-710 LPS-51T-187(-8) EJ-PS187
YC-711
(for AWG #18, #14)
SPS-51T-205 – LPS-51T-205
SPS-61T-250 YC-720 WC-720 LPS-61T-250 EJ-PS250
SPS-61T-250S – YC-721 – LPS-61T-250S EJ-PS250
SPS-91T-250 – YRF-790 – BPS-91T-250 EJ-PS250
SPS-91T-250S – YRF-791 – BPS-91T-250S EJ-PS250
SRA-20(T)-** – YC-181 – LRA-20(T)-**
SRA-21(T)-** – YC-141 – LRA-21(T)-**
SRA-50(T)-** – YC-182 – LRA-50(T)-**
SRA-51(T)-** – YC-142 – LRA-51(T)-**
SRB-1.0-( ) –––– JUCS-RB/RT –
SRB-2.5-( ) –––– JUCS-RB/RT –
SRB-51(T)-** – YC-142 – LRB-51(T)-**
SRC-01(T)-** – YC-033 – LRC-01(T)-**
SRC-50(T)-** – YC-183 – LRC-50(T)-**
SRC-51(T)-** – YC-142 – LRC-51(T)-**
SRF-51(T)-** – YC-142 – LRF-51(T)-**
SRT-1.0-( ) –––– JUCS-RB/RT –
SRT-2.5-( ) –––– JUCS-RB/RT –
SRT-51T-** – YC-143R – LRT-51T-**
SRWF-01GG-M0.6 – YC-830R – BRWF-01GG-M0.6
SRWM-01GG-S0.6 – YC-830R – BRWM-01GG-S0.6
SRWF-61GG-M0.6 – YC-840R – BRWF-61GG-M0.6
SRWM-61GG-S0.6 – YC-840R – BRWM-61GG-S0.6
SSH/L-002( )-P0.2 –––– WC-GH2630 –
SSH-003T-P0.2-H YRS-859 – – – WC-SH2832
SSH-003GA-P0.2 YRS-859 – – – WC-SH2832
SSHL-003T-P0.2 YRS-859 – – – WC-SH2832
SSHL-003GA1-P0.2 YRS-859 – – – WC-SH2832
SSF-01T-P1.4 – YC-500 – BSF-01T-P1.4 SLJ-1.4 ITBL-08V
SSM-01T-P1.4 – YC-500 – BSM-01T-P1.4 SLJ-1.4 ITBL-08V
SSF/M-21T-P1.4 YC-550 WC-550 BSF/M-21T-P1.4 SLJ-1.4
STI-01(T)-110N – YC-041 – LTI-01(T)-110N
STI-1.0-250D/N –––– JUCS-TI –
STI-2.5-250D/N –––– JUCS-TI –
STI-41(T)-110N – YC-063 – LTI-41(T)-110N
STI-51(T)-250N – YC-322 – LTI-51(T)-250N
STO-01(T)-110N(-8) – YC-041 – LTO-01(T)-110N(-8)
STO-01(T)-187N(-8) – YC-042 – LTO-01(T)-187N(-8)
STO-0.25-110N YC-810 – – – –
YC-770
(for UL1015 AWG #20, #16)
YC-771
(for UL1015 AWG #18, #14)
Crimping tools
Crimping tools
JST .IST
943942
STO-0.5-110N – YC-820 JUCS-05110
STO-1.0-110N –––– JUCS-2.8/4.8 –
STO-1.0-187N –––– JUCS-2.8/4.8 –
STO-1.0-250N –––– JUCS-6.3 –
STO-2.5-250N –––– JUCS-6.3 –
STO-21T-205 YC-052 – – – –
STO-21(T)-205N – YC-053 – LTO-21(T)-205N
STO-21(T)-250N – YC-102 – LTO-21(T)-250N
STO-41(T)-110N(-8) – YC-062 – LTO-41(T)-110N(-8)
STO-41(T)-187N(-8) – YC-051 – LTO-41(T)-187N(-8)
STO-41T-187S – YC-064 – LTO-41T-187S
STO-61(T)-250N – YC-047 – LTO-61(T)-250N
STO-81(T)-250N – YC-280 – YRF-280 – LTO-81(T)-250N
SVA-41T-P1.1 – YC-450 – BVA-41T-P1.1 EJ-SMP
SVF-01T-1.5A – YC-044 – LVF-01T-1.5A
SVF-01T-1.5N – YC-151 – LVF-01T-1.5N
SVF-01T-2.36LN –––– ––EJ-LV –
SVF-01T-2.36N – YC-152 – LVF-01T-2.36N EJ-LV
SVF-42T-P2.0 YC-592 WC-592 BVF-42T-P2.0 VLJ-20
SVM-42T-P2.0 YC-593 WC-592 BVM-42T-P2.0 VLJ-20
SVF/M-61T-P2.0 – YC-590 – YRF-590 WC-590 BVF/M-61T-P2.0 VLJ-20
SVF/M-81T-P2.0 – – – YRF-591 WC-591 BVF/M-81T-P2.0 VLJ-20
SVH-21T-P1.1 WC-160 BVH-21T-(P)1.1 EJ-NV
SVH-41T-P1.1 WC-930 BVH-41T-P1.1
SVT-41T-P1.1 – YC-630 – BVT-41T-P1.1 EJ-VT
SVU-21T-P0.6 – YC-990R – BVU-21T-P0.6
SWPKR-21T-0.6 – – – YRF-1050 – –
SWPKP-21T-0.6 – – – YRF-1051 – –
SWPR-001T-P025 YRS-980 – – – WC-JWPF
SWPT-001T-P025 YRS-980 – – – WC-JWPF
SXA-01T-P0.6 YC-701R WC-700M BXA-01T-P0.6 EJ-XMP
SXM-01T-P0.6 – YC-701R – BXM-01T-P0.6 EJ-XMP
SXA-001T-P0.6 YRS-692 YC-692R BXA-001T-P0.6 EJ-XMP, EJ-XMR IT-XA
SXM-001T-P0.6 YRS-692 YC-692R BXM-001T-P0.6 EJ-XMP, EJ-XMR IT-XA
SXA-001T-P0.6L YRS-691 – – – WC-691
SXAM-01T-P0.6 – YC-701R WC-700M BXAM-01T-P0.6
SXAM-001T-P0.6 YRS-692 YC-692R – BXAM-001T-P0.6
SXF-01T-P0.7 – YC-251 – BXF-01T-(P)0.7 LEJ-7
SXF-41T-P0.7 – YC-252 – BXF-41T-(P)0.7 LEJ-7
YC-930R
(for AWG #20, #16)
YC-931R
(for UL1015 AWG #20, #18)
YRM-160
YRM-164
YC-160R
(for AWG #22, #20)
YC-161R
(for AWG #20, #18)
YC-164R
(for UL1015 AWG #22, #20)
Extraction tool
Terminals and parts model
number in alphabetical order
Insertion tool
Hand tools Hand tools
for chain terminals for loose piece terminals for loose piece terminals
Extraction and Insertion tools
YRS series YC series YRM series YRF series WC & JUC series
JUK's Hand Tools
Terminal in loose form
model No.
Crimping tools
Crimping tools
JST .IST
945944
Extraction tool
Terminals and parts model
number in alphabetical order
Insertion tool
Hand tools Hand tools
for chain terminals for loose piece terminals for loose piece terminals
Extraction and Insertion tools
YRS series YC series YRM series YRF series WC & JUC series
JUK's Hand Tools
Terminal in loose form
model No.
SXH-001T-P0.6 WC-110 BXH-001T-P0.6 XJ-06
SXH-001T-P0.6N –––– ––XJ-06 –
SXH-002T-P0.6 YRS-480 – – – – – XJ-06
SYF-001T-P0.6 YRS-125 – – – – –
SYF/M-01T-P0.5A YC-520 WC-520 BYF/M-01T-P0.5A YLJ-0.5
SYF/M-41T-P0.5A YC-530 WC-530 BYF/M-41T-P0.5A YLJ-0.5
SYM-001T-P0.6 YRS-121 YC-121R WC-121 BYM-001T-P0.6 SMJ-06
SYM-01T-P0.7 – YC-251 – BYM-01T-(P)0.7 LEJ-7
SYM-41T-P0.7 – YC-252 – BYM-41T-(P)0.7 LEJ-7
SZF/M-01T-P0.7 – YC-390R – BZF/M-01T-(P)0.7 ZLJ-07S
SZF/M-41T-P0.7 – YC-380R – BZF/M-41T-(P)0.7 ZLJ-07S
SZH-002T-P0.5 YRS-491 – – – WC-491
SZH-003T-P0.5 YRS-490 – – – WC-490
SZN-002T-P0.7K YRS-541 – – – – –
SZN-003T-P0.7K YRS-540 – – – – –
YC-110R
(for AWG #26, #24)
YC-111R
(for AWG #24, #22)
YRS-110
Crimping tools
Crimping tools

Products related to this Datasheet

TOOL HAND CRIMPER 20-26AWG SIDE
TOOL HAND CRIMPER 18-22AWG SIDE
TOOL HAND CRIMPER 14-18AWG SIDE
TOOL HAND CRIMPER 22-26AWG SIDE
TOOL HAND CRIMPER 18-22AWG SIDE
TOOL HAND CRIMPER 24-30AWG SIDE
TOOL HAND CRIMPER 28-32AWG SIDE
TOOL HAND CRIMPER 24-28AWG SIDE
TOOL HAND CRIMPER 22-26AWG SIDE
TOOL HAND CRIMPER 22-26AWG SIDE
TOOL HAND CRIMPER 24-28AWG SIDE
TOOL HAND CRIMPER 24-26AWG SIDE
TOOL HAND CRIMPER 18-22AWG SIDE
TOOL HAND CRIMPER 26-28AWG SIDE
TOOL HAND CRIMPER SLC-21T-2.0
TOOL HAND CRIMPER 22-26AWG SIDE
TOOL HAND CRIMPER 22-28AWG SIDE
TOOL HAND CRIMPER 16-20AWG SIDE
TOOL HAND CRIMPER 20-24AWG SIDE
TOOL HAND CRIMPER 22-28AWG SIDE
TOOL HAND CRIMPER 22-26AWG SIDE
TOOL HAND CRIMPER 20-24AWG SIDE
TOOL HAND CRIMPER 24-28AWG SIDE
TOOL HAND CRIMPER 20-24AWG SIDE
TOOL HAND CRIMPER SGF-51(T)-5
TOOL HAND CRIMPER 26-30AWG SIDE
TOOL EXTRACTION XH
TOOL HAND CRIMPER 22-26AWG SIDE
TOOL HAND CRIMPER 24-28AWG SIDE
TOOL HAND CRIMPER 22-28AWG SIDE
TOOL HAND CRIMPER 14-20AWG SIDE
TOOL HAND CRIMPER 12AWG SIDE
TOOL HAND CRIMPER 16-22AWG SIDE
EXTRACTION TOOL VL SERIES
TOOL HAND CRIMPER 22-24AWG SIDE
TOOL HAND CRIMPER 18-20AWG SIDE
TOOL HAND CRIMPER SSF/M-21T-P1-4
TOOL HAND CRIMPER 22-28AWG SIDE
TOOL HAND CRIMPER 28-30AWG SIDE
TOOL HAND CRIMP 24-30AWG