EIA-232 Modem Cables RJ-45 to DB-25 Datasheet by Digi
View All Related Products | Download PDF Datasheet
O
0
Male DB-25
Conmcmrs not lo scde
IO 1
RJ-45 10-Pin
FRONT
0— v
Ilfifififififififififi
Ilfifififififififififi
REE?
xxfifififififififififi
\PPPFP
advanced search
Products
•
device servers
•
terminal servers
•
console
management
•
USB
•
async
Modem Cables
EIA-232 Modem Cables RJ-45 10-pin to DB-25
The wiring diagram for a RJ-45 10-pin to DB-25 pin modem cable is shown in Table 1.
Table 1: EIA-232 RJ-45 10-pin to DB-25
From
RJ-45 Signal Direction Signal To DB-25
10 DCD DCD 8
6 RxD RxD 3
5 TxD TxD 2
9 DTR DTR 20
7 SG SG 7
2 DSR DSR 6
3 RTS RTS 4
8 CTS CTS 5
1 RI RI 22
Shell GND GND Shell
* Arrows indicate which direction the signal is flowing
These cables can also be purchased form Digi (See part numbers below).
● 2' RJ-45 10-pin to DB-25 Pin - Part #76000129
● 4' RJ-45 10-ping to DB-25 Pin - Part #76000195
NOTES:
● Altpin should be turned off when using this cable.
● This cable utilizes the CTS signal of the modem for hardware flow control (RTS/CTS).
● EIA-232 cables cannot exceed 2500pF. For information about calculating capacitance of your
cable, click here.
● For information regarding the EIA-232/EIA-422/EIA485 specifications, click here.
products | applications | support | partners | news | about Digi | where to buy | contact us | site map
Copyright © 1996-2002 Digi International. All rights reserved.