EEC-HL Series (Small Size) Datasheet by Panasonic Electronic Components

View All Related Products | Download PDF Datasheet
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Electric Double Layer Capacitors (Gold Capacitor)
L+2 max.
Sleeve
14 min.
3 min.
fD+0.5 max.
fd±0.05
P ± 0.5
Vent
Guaranteed 70 °C 2.7 V.DC 2000 h
Guaranteed 85 °C 2.5 V.DC 1000 h
Low resistance : 30 mΩ max. (1 kHz) 1
Low temperature : –40 °C guaranteed
RoHS compliant
Backup power supply of E-meter, storage (SSD)
Driver assist of motor, actuator
Backup for power supply of drive recorder, emergency brake, door lock releasing device
Recommended Applications
Features
Radial Lead Type
Series : HL
Small size
Unit : mm
Category
temp. range
(°C)
Maximum
operating voltage
(V.DC)
Capacitance
(F)
Capacitance
tolerance
(F)
Internal resistance
(Initial specifi ed value)
(Ω) at 1 kHz
Recommended
2
discharge current
Parts number
Mass
(Reference value)
(g)
Min.
Packaging Q'ty
(pcs)
–40 to +70
(+85)
2.7
(2.5)
2.5 2.0 to 3.0 < 0.07 < 2.5 A EECHL0E255 1.5 200
4.0 3.2 to 4.8 < 0.05 < 3.5 A EECHL0E405 2.3 200
7.5 6.0 to 9.0 < 0.03 < 6.0 A EECHL0E755 3.4 200
1 010×L30
2 The recommended discharge current is a reference value. Please design your equipment (circuit) in consideration of IR drop.
Do not use refl ow soldering. Please refer to the page of “Application guidelines”.
Remark1: Install the space of 2 mm or more in the upper part of the product so as not to disturb the movement of the pressure valve.
Category temp. range
–40 °C to +70 °C (+85 °C)
Maximum operating voltage
2.7 V.DC (2.5 V.DC)
Nominal cap. range 2.5 F 4.0 F 7.5 F
Characteristics at
low temprature
Capacitance change
±30 % of initial measured value at +20 °C (at –40 °C)
Internal resistance
< 4 times of initial specifi ed value. (at –40 °C)
Endurance 1
After 2000 hours application of 2.7 V.DC at +70 °C
Capacitance change
Within ±40 % of the initial value
Internal resistance
< 4 times of initial specifi ed value.
Endurance 2
After 1000 hours application of 2.5 V.DC at +85 °C
Capacitance change
Within ±40 % of the initial value
Internal resistance
< 4 times of initial specifi ed value.
Shelf life
After 1000 hours storage at +85 °C 1000 h without load (voltage)
Capacitance change
Within ±40 % of the initial value
Internal resistance
< 4 times of initial specifi ed value.
Capacitance
(F) 0DL0dP
2.5 8.0 20.0 0.6 3.5
4.0 10.0 20.0 0.6 5.0
7.5 10.0 30.0 0.6 5.0
Specifi cations
Dimensions (not to scale)
Characteristics list
NEW
Jan. 201700
Panasonic Guidelines and precautions regarding the technical information and use of our products described in this online catalog. I If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. I The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. I If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. I The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. I The technical information in this online catalog provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. I If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. l The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. I When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. Dlrnprrlg
If you want to use our products described in this online catalog for applications requiring
special qualities or reliability, or for applications where the failure or malfunction of the
products may directly jeopardize human life or potentially cause personal injury
(e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion
equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety
equipment), it is necessary to verify whether the specifications of our products fit to such
applications. Please ensure that you will ask and check with our inquiry desk as to whether
the specifications of our products fit to such applications use before you use our products.
The quality and performance of our products as described in this online catalog only apply
to our products when used in isolation. Therefore, please ensure you evaluate and verify
our products under the specific circumstances in which our products are assembled in your
own products and in which our products will actually be used.
If you use our products in equipment that requires a high degree of reliability, regardless
of the application, it is recommended that you set up protection circuits and redundancy
circuits in order to ensure safety of your equipment.
The products and product specifications described in this online catalog are subject to
change for improvement without prior notice. Therefore, please be sure to request and
confirm the latest product specifications which explain the specifications of our products in
detail, before you finalize the design of your applications, purchase, or use our products.
The technical information in this online catalog provides examples of our products'
typical operations and application circuits. We do not guarantee the non-infringement of
third party's intellectual property rights and we do not grant any license, right, or interest
in our intellectual property.
If any of our products, product specifications and/or technical information in this online
catalog is to be exported or provided to non-residents, the laws and regulations of the
exporting country, especially with regard to security and export control, shall be observed.
The switchover date for compliance with the RoHS Directive/REACH Regulations varies
depending on the part number or series of our products.
When you use the inventory of our products for which it is unclear whether those products
are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the
website inquiry form and contact us.
We do not take any responsibility for the use of our products outside the scope of the
Guidelines and precautions regarding the
described in this online catalog.
<Regarding the Certificate of Compliance with
01-Apr-19
technical information and use of our products
the EU RoHS Directive/REACH Regulations>

Products related to this Datasheet

CAP 2.5F 20% 2.7V T/H
CAP 4F 20% 2.7V T/H
CAP 7.5F 20% 2.7V T/H