PD-IM-7504B User Guide Datasheet by Microchip Technology

View All Related Products | Download PDF Datasheet
PD-IM-7504B Marketing Board - User Guide
PD-IM-7504B Marketing Board
User Guide
Preliminary
Revision 1.1
PRODUCTION DATA Information contained in this document is proprietary to
Microsemi and is current as of publication date. This document may not be
modified in any way without the express written consent of Microsemi. Product
processing does not necessarily include testing of all parameters. Microsemi
reserves the right to change the configuration and performance of the product and
to discontinue product at any time.
PD-IM-7504B Marketing Board - User Guide
Copyright © 2013 Microsemi Page 2
Rev. 1.1, 09-June-13 Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA; Within the USA: (800) 713-4113, Outside the USA: (949) 221-7100 Fax: (949) 756-0308
Table of Contents
1 ABOUT THIS GUIDE.........................................................................................................................................3
1.1 Audience ..................................................................................................................................................3
1.2 Organization .............................................................................................................................................3
2 INTRODUCTION ...............................................................................................................................................4
2.1 Marketing Boards Ordering Information ...................................................................................................4
2.2 Marketing Board Features ........................................................................................................................4
2.3 Marketing Board Interfaces and Connections ..........................................................................................5
2.4 Physical Characteristics ...........................................................................................................................5
2.5 Communication ........................................................................................................................................5
3 PHYSICAL DESCRIPTION .................................................................................................................................6
3.1 Package Contents ....................................................................................................................................6
3.2 Reset Button ............................................................................................................................................6
3.3 Connectors ...............................................................................................................................................6
3.3.1 Connectors Table ..............................................................................................................................6
3.4 Vin DC jack connectors (J1)......................................................................................................................7
3.5 LEDs Indication ........................................................................................................................................8
4 ELECTRICAL CHARACTERISTICS .....................................................................................................................9
5 INSTALLATION ............................................................................................................................................. 10
5.1 Preliminary Considerations and Safety Precautions ............................................................................. 10
5.2 Default Configuration ............................................................................................................................ 10
6 RELEVANT DOCUMENTS .............................................................................................................................. 11
PD-IM-7504B Marketing Board - User Guide
Copyright © 2013 Microsemi Page 3
Rev. 1.1, 09-June-13 Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA; Within the USA: (800) 713-4113, Outside the USA: (949) 221-7100 Fax: (949) 756-0308
1 About this Guide
This user guide provides both a description and operation procedures for Microsemi's PD-IM-7504B Marketing
Board, which is used to evaluate the performance of PD69104A/B/B1 PoE applications.
1.1 Audience
This user guide is intended for qualified personnel, meaning operators and technicians who have a background in
electronics and are familiar with its basic concepts.
1.2 Organization
This guide is divided into several sections as follows:
CHAPTER 1
About this Guide: Describes guide’s objectives, audience, and organization.
CHAPTER 2
Introduction: Describes PoE Marketing board over view, main functions,
features, physical characteristics, and ordering information.
CHAPTER 3
Physical Description: Provides explanation that relate to the physical
description (switches, jumpers, connectors).
CHAPTER 4
Electrical Characteristics: Provides electrical characteristics of the PoE
Marketing board.
CHAPTER 5
Installation: Describes installation process.
CHAPTER 6
Relevant Documents: Details other documents relevant to the Marketing
Board.
Reset Button P055310“ IZC connector JP1 Power in DC Jack UART Counselor J2 EEPROM
PD-IM-7504B Marketing Board - User Guide
Copyright © 2013 Microsemi Page 4
Rev. 1.1, 09-June-13 Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA; Within the USA: (800) 713-4113, Outside the USA: (949) 221-7100 Fax: (949) 756-0308
2 Introduction
Microsemi’s PD-IM-7504B Marketing Board (see Figure 1) provides designers with the needed environment to
evaluate the performance and implementation of PoE and PoE extended mode applications, based on
PD69104A/B/B1 PoE Manager. Marketing board enables PoE designers to evaluate Microsemi's PoE solution with
maximum flexibility and ease in configuration
All necessary steps and connection instructions required for installing and operating this board are provided within
this document.
Figure 1: PD-IM-7504B Marketing Board General View
2.1 Marketing Boards Ordering Information
Microsemi’s supplies the following Marketing Boards as detailed below:
Ordering Number
Description
PD-IM-7504A
1 Marketing Board that simulates a 4 ports PoE.
2.2 Marketing Board Features
Designed to support four RJ45 ports, PoE application, and PoE extended mode (2-pairs)
Vin connector DC jack
On-board LEDs indicators
Reset button
EEPROM support
I2C and UART communication connectors.
Marketing Board working temperature: 0°c to +50°c
RoHS compliant
hug://www.lma|ghase.com/graducIs/aardvark i2csgi/
PD-IM-7504B Marketing Board - User Guide
Copyright © 2013 Microsemi Page 5
Rev. 1.1, 09-June-13 Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA; Within the USA: (800) 713-4113, Outside the USA: (949) 221-7100 Fax: (949) 756-0308
2.3 Marketing Board Interfaces and Connections
Board has several interfaces:
RJ45 interface: Running from PD69104A/B/B1 to 4 PDs (powered devices)
Vin connectors: DC in (Vmain) connection (J1)
LEDs indication: Vmain power OK, Power limit LEDs
UART connector: for UART communication.
I2C connector: for I2C communication or EEPROM configuration.
2.4 Physical Characteristics
The following table lists the Marketing Board’s physical characteristics.
Physical Characteristics
Parameter
Mechanical dimensions
2.5 Communication
I2C Marketing Board is set to work with I2C communication through connector JP1, with Aardvark
(http://www.totalphase.com/products/aardvark_i2cspi/) or any other I2C master.
Pin
JP1 Description
1
SCL
2
GND
3
SDA
4
5
6
7
8
9
10
WP **
** When configuring EEPROM, connect this pin to GND.
UART- connecting through J2 pins:
Pin
J2 Description
1
3.3V (out)
2
Tx
3
Rx
4
GND
E2PROM When no host controls the IC and configuration should be other then default, an EEPROM may
be used for uploading new configurations. EEPROM can be burn by JP1.
PD-IM-7504B Marketing Board - User Guide
Copyright © 2013 Microsemi Page 6
Rev. 1.1, 09-June-13 Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA; Within the USA: (800) 713-4113, Outside the USA: (949) 221-7100 Fax: (949) 756-0308
3 Physical Description
3.1 Package Contents
Upon opening the Marketing Board package, verify all parts itemized in the packing list are included. If any part is
missing or seems damaged; contact local representative or Microsemi's Headquarters. Package contents for
standard shipments are as follows:
PD-IM-7504B Marketing Board
55V power supply Adapter + AC cord
3.2 Reset Button
The dedicated Reset button SW1 (see Figure 1) is utilized to reset PD69104A/B/B1 PoE manager.
3.3 Connectors
The following sections provide both general and detailed information regarding unit connectors.
3.3.1 Connectors Table
The following table lists Marketing Board's connectors.
Table 1: Connectors List
#
Connector
Name
Description
1
J1
Vin DC jack
44V-57V DC input (Vmain) connection used for
powering the Marketing Board
2
J2
UART connector
UART communication connector. (3.3V compatible)
Can use PD-0600 (Microsemi USB to UART
converter) or any equivalent equipment
3
J3
RJ45 connectors
Four RJ45 ports for connecting to powered device
4
JP1
I2C connector
Connection to I2C communication through
AARDVARK or any other equivalent equipment
(3.3V compatible)
PD-IM-7504B Marketing Board - User Guide
Copyright © 2013 Microsemi Page 7
Rev. 1.1, 09-June-13 Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA; Within the USA: (800) 713-4113, Outside the USA: (949) 221-7100 Fax: (949) 756-0308
3.4 Vin DC jack connectors (J1)
See Figure 2.
DC in (Vmain) connection, used to power Marketing Board, 44V > Vmain > 57VDC.
Table 2: Vin Connectors
Pin No.
Signal Name
Description
1
Vmain (Vin +)
Positive main voltage (referenced to AGND)
Hole 1(right)
Vmain (Vin +)
Used for soldering wires to external power supply
Hole 2(left)
GND(Vin -)
Used for soldering wires to external power supply
Figure 2
Since provided power supply can’t support four ports PoE + full load (4*0.6A=2.4A), a wired connection can be
used for connecting laboratory power supply directly to PCB using the holes located near J1.
pans sums LEDS
PD-IM-7504B Marketing Board - User Guide
Copyright © 2013 Microsemi Page 8
Rev. 1.1, 09-June-13 Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA; Within the USA: (800) 713-4113, Outside the USA: (949) 221-7100 Fax: (949) 756-0308
3.5 LEDs Indication
D1 VMAIN indication .
D3 MAX power indication. (Indicates power budget is reaching its limit)
Port Status LED in front of each port in the RJ45 connector there is a green LED that indicates whether
port is operating. See Figure 4
Figure 3: LEDs Indication
Figure 4: LEDs Indication
PD-IM-7504B Marketing Board - User Guide
Copyright © 2013 Microsemi Page 9
Rev. 1.1, 09-June-13 Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA; Within the USA: (800) 713-4113, Outside the USA: (949) 221-7100 Fax: (949) 756-0308
4 Electrical Characteristics
Marketing board’s electrical characteristics are listed below:
Table 3: Electrical Characteristics
Parameter
Symbol
Min.
Max.
Units
Main DC supply Vmain
Vin
44
57
V
Port current
Iout
0.6
A
PD-IM-7504B Marketing Board - User Guide
Copyright © 2013 Microsemi Page 10
Rev. 1.1, 09-June-13 Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA; Within the USA: (800) 713-4113, Outside the USA: (949) 221-7100 Fax: (949) 756-0308
5 Installation
This chapter describes the steps required for installing and operating the Marketing Board with any PoE
application.
5.1 Preliminary Considerations and Safety Precautions
Prior to powering the board, connect all required peripherals.
Never hot swap peripherals units!
Verify board is properly configured prior to turning on power supply.
5.2 Default Configuration
Current set configured to AT mode (600mA).
If “AF” current (350mA) has to be changed, load 0Ω to R11.
Communication mode set to I2C (R5 is loaded with 0Ω).
If UART is required, disconnect R5 and connect 0Ω to R8.
PoE Automode.
All configurations can be set by communication or EEPROM.
PD-IM-7504B Marketing Board - User Guide
Copyright © 2013 Microsemi Page 11
Rev. 1.1, 09-June-13 Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA; Within the USA: (800) 713-4113, Outside the USA: (949) 221-7100 Fax: (949) 756-0308
6 Relevant Documents
PD69104A datasheet, catalogue number DS_PD69104A
PD69104B datasheet, catalogue number DS_PD69104B
PD69104B1 datasheet, catalogue number DS_PD69104B1
Serial Communication Protocol user guide PD63000_UG
PD69104A reg. map user guide, catalogue number 06-0480-056
PD69104B reg. map user guide, catalogue number PD69104B_GENERIC_UG_REG_MAP
Marketing board schema PD-1358G201
PD69104B Based Design of a 4-port Auto Mode System AN-198, catalogue number 06-0134-080
sa‘es AMSG m rose www.microsem .com
PD-IM-7504B Marketing Board - User Guide
Copyright © 2013 Microsemi Page 12
Rev. 1.1, 09-June-13 Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA; Within the USA: (800) 713-4113, Outside the USA: (949) 221-7100 Fax: (949) 756-0308
The information contained in the document (unless it is publicly available on the Web without access restrictions) is
PROPRIETARY AND CONFIDENTIAL information of Microsemi and cannot be copied, published, uploaded,
posted, transmitted, distributed or disclosed or used without the express duly signed written consent of Microsemi.
If the recipient of this document has entered into a disclosure agreement with Microsemi, then the terms of such
Agreement will also apply. This document and the information contained herein may not be modified, by any
person other than authorized personnel of Microsemi. No license under any patent, copyright, trade secret or other
intellectual property right is granted to or conferred upon you by disclosure or delivery of the information, either
expressly, by implication, inducement, estoppels or otherwise. Any license under such intellectual property rights
must be approved by Microsemi in writing signed by an officer of Microsemi.
Microsemi reserves the right to change the configuration, functionality and performance of its products at anytime
without any notice. This product has been subject to limited testing and should not be used in conjunction with life-
support or other mission-critical equipment or applications. Microsemi assumes no liability whatsoever, and
Microsemi disclaims any express or implied warranty, relating to sale and/or use of Microsemi products including
liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent,
copyright or other intellectual property right. Any performance specifications believed to be reliable but are not
verified and customer or user must conduct and complete all performance and other testing of this product as well
as any user or customers final application. User or customer shall not rely on any data and performance
specifications or parameters provided by Microsemi. It is the customers and user’s responsibility to independently
determine suitability of any Microsemi product and to test and verify the same. The information contained herein is
provided “AS IS, WHERE IS” and with all faults, and the entire risk associated with such information is entirely with
the User. Microsemi specifically disclaims any liability of any kind including for consequential, incidental and
punitive damages as well as lost profit. The product is subject to other terms and conditions which can be located
on the web at http://www.microsemi.com/legal/tnc.asp
Revision History
Revision Level / Date
Para.
Affected/Page
Description
1.0 / 10-Feb-11
Initial revision
1.1 / 09-June-13
Update to support PD69104B/1
For support contact: sales_AMSG@microsemi.com
Visit our web site at: www.microsemi.com Catalog Number: PD69104B_UG_EVB

Products related to this Datasheet

POE EVB