POSCAP™ Product Catalog Datasheet by Panasonic Electronic Components

View All Related Products | Download PDF Datasheet
Panasonic poscAP‘
Conductive Polymer Tantalum Solid Capacitors
Products Catalog
Products Catalog
2016.01
http://industrial.panasonic.com/ww/products/capacitors/polymer-capacitors/poscap
2016
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
——— Notices ———
Applicable Laws and Regulations
This product complies with the RoHS Directive (Restriction of the use of certain Hazardous substances in
electrical and electronic equipment (DIRECTIVE 2011/65/EU).
No Ozone Depleting Chemicals(ODC's), controlled under the Montreal Protocol Agreement, are used in
producing this product.
We do not PBBs or PBDEs as brominated flame retardants.
Export procedure which followed export related regulations, such as foreign exchange and a foreign trade
method, on the occasion of export of this product Thank you for your consideration.
Limited applications
This capacitor is designed to be used for electronics circuits such as audio/visual equipment, home
appliances, computers and other office equipment, optical equipment, measuring equipment.
High reliability and safety are required [ be / a possibility that incorrect operation of this product may do harm
to a human life or property ] more. When use is considered by the use, the delivery specifications which suited
the use separately need to be exchanged.
Items to be observed —
This specification guarantees the quality and performance of the product as individual components.
Before use, check and evaluate their compatibility with installed in your products.
Do not use the products beyond the specifications described in this document.
For specifi cations
Install the following systems for a failsafe design to ensure safety if these products are to be used in
equipment where a defect in these products may cause the loss of human life or other signification damage,
such as damage to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment,
electric heating appliances, combustion/ gas equipment, rotating rotating equipment, and disaster/crime
prevention equipment.
· The system is equipped with a protection circuit and protection device.
· The system is equipped with a redundant circuit or other system to prevent an unsafe status in the event of
a single fault.
Conditions of use
Before using the products, carefully check the effects on their quality and performance, and determined
whether or not they can be used. These products are designed and manufactured for general-purpose and
standard use in general electronic equipment. These products are not intended for use in the following special
conditions.
(1) In liquid, such as Water, Oil, Chemicals, or Organic solvent.
(2) In direct sunlight, outdoors, or in dust.
(3) In vapor, such as dew condensation water of resistive element, or water leakage, salty air, or air with a
high concentration corrosive gas, such as Cl2, H2S, NH3, SO2, or NOx.
(4) In an environment where strong static electricity or electromagnetic waves exist.
(5) Mounting or placing heat-generating components or inflammables, such as vinyl-coated wires, near
these products.
(6) Sealing or coating of these products or a printed circuit board on which these products are mounted,
with resin and other material.
(7) Using resolvent, water or water-soluble cleaner for flux cleaning agent after soldering. (In particular,
when using water or a water-soluble cleaning agent, be careful not to leave water residues)
(8) Using in the atmosphere which strays Acid or alkaline.
(9) Using in the atmosphere which there are excessive vibration and shock.
Please arrange circuit design for preventing impulse or transitional voltage.
Do not apply voltage, which exceeds the full rated voltage when the capacitors receive impulse voltage,
instantaneous high voltage, high pulse voltage etc.
Our products there is a product are using an electrolyte solution. Therefore, misuse can result in rapid
deterioration of characteristics and functions of each product. Electrolyte leakage damages printed circuit and
affects performance, characteristics, and functions of customer system.
Nov. 201500
Panasonic A
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
Guidelines and precautions (POSCAP)
1. Circuit design
1.1 Prohibited circuits
Since problems can be expected, POSCAP cannot be used on the following circuits
(1) High impedance voltage retention circuits
(2) Time constant circuits
(3) Circuits greatly affected by leakage current
(4) The circuit in which two or more POSCAP are connected in a series so as to raise the endurance voltage.
1.2 Failure and life-span
The failure rate is 0.5 % / 1000 h (Confidence level : 60 %) based on JIS C 5003.
The mainly failure modes are as follows.
B2 size or less : 1.0 %
1.2-1 Contingency failure
The main causes of failure are thermal stresses cause by the soldering or thermal use environment, along with
heat stresses, electrical stresses or mechanical stresses. The most common failure mode is a short circuit.
In case a short circuit occurs, ensure safety by fully considering the followings.
(1) If POSCAP emit smoke, turn off the main power of the equipment. In this case, keep your face and
hands away from the area.
(2) It may take a few seconds to a few minutes before POSCAP emits smoke by the situation. Increase
safety by using a protective circuit.
(3) If the smoke comes into eyes, rinse immediately. If the smoke is inhaled, gargle immediately.
(4) In case a large current continues to flow after a short circuit, in the worst case, the shorted-out
section may ignite. For safety, install a redundant circuit or a protective circuit, etc.
1.2-2 Wear-out failure (lifetime)
When lifetime exceeded the specified guarantee time of Endurance and Damp heat, electrolyte
might insulate and cause electric characteristic changed. This is called an open circuit. The electric
characteristics of capacitance and ESR may possibly change within the specified range in specifications
when it is used under the condition of the rated voltage, electric and mechanical performance. Please
note it when design.
1.3 Reduction of failure stress
When POSCAP is used within the rated voltage, it shows a stable characteristic, but it may be damaged
in a short circuit when an overvoltage, for instance, is applied. The time to reach the failure mode can be
extended by using POSCAP with reduced environment temperature, ripple current and applied voltage.
Failure rate
In the case of the endurance which is 105 °C 2000 h.
0.5 %/1000 h (Environment temp. : 105 °C, Rated voltage or Category voltage applied)
In the case of the endurance which is 105 °C 1000 h or 125 °C 1000 h.
1.0 %/1000 h (Environment temp. : 105 °C, Rated voltage or Category voltage applied)
In the case of the endurance which is 85 °C 1000 h.
1.0 %/1000 h (Environment temp. : 85 °C, Rated voltage applied)
1.4 Check the rated performance
After checking the operation and installation environments, design the circuit so that it falls within the rated
performance range stipulated in this delivery specification.
1.5 Operating temperature and ripple current
(a) Set the operating temperature so that it falls within the range stipulated in this delivery specification.
(b) Do not apply current that exceeds the allowable ripple current. Ripple current should be controlled so that
surface temperature of a capacitor do not exceed the rated temperature.
(For questions regarding TQC series, please contact us.)
Nov. 201501
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
1.6 Leakage current
Even when the soldering conditions fall within the range of this delivery specifications, leakage current
increases a little on occasion. It also increases a little during high temperature storage, high humidity storage
and temperature cycling with no voltage applied. In cases such as these, leakage current will decrease by
applying voltage under the condition of below the POSCAP's maximum operating temperature.
The speed at which the leakage current is restored is increased by applying voltage when the POSCAP's
temperature is close to the maximum operating temperature.
1.7 Rapid charge and discharge limitation
Rapid charge and discharge are restricted (for maintainance of high-proof reliability).
A protective circuit is recommended for when a rapid charge or discharge causes excessive rush current
since this is main cause of short circuit and large leakage current. Use a protective circuits in case the rush
current value exceeds 20 A.
Be sure to insert a protection resistor of about 1 kΩ for charge and discharge when measuring the leakage current.
When TH series use under the ambient temperature more than 105 °C : 10 A
TPU series : 10 A
2. Mounting
2.1 Protect circuit
The failure mode of POSCAP is the short mode. When it breaks down, short electric current flows to it.
POSCAP gives off heat by this short current.
Do the following consideration in design fully for the safety because it has a bad influence on the part around
POSCAP due to this heat.
A protective circuit and a protective device are set up, so as to make the system safer.
A diffuse circuit and so on is set up, so as to make the system safer such as that a machine may not
break down as to the single trouble.
2.2 Considerations when soldering
The soldering conditions are to be within the range prescribed in this delivery specification.
If the specifications are not followed, there is the possibility of degradation of electric characteristic and
lifetime when soldering is conducted under conditions that are harsher that those stipulated.
2.3 Others
POSCAP’s Electrical characteristics are affected by temperature and frequency fluctuations.
Design circuits after checking the amount of fluctuation.
3. Storage
It is necessary to set an environment to prevent a trouble at the time of soldering by the degradation of solder
ability or moisture's getting into the molding resin when POSCAP are stored.
Please make storage of POSCAP sealing up in the reel and storage bag at the time of delivery in the following
environment. Also, set storage period as 18 months or shorter.
Room temperature and room humidity (generally : 15 to 35 °C, 45 to 75% RH ) are desirable.
Place where POSCAP is not exposed by direct sunshine.
Please unseal storage bag just before mounting and be conscious that POSCAP in the storage bag is used up.
When remainder unfortunately occurs, return them to the storage bag once again and, please seal the unsealed
part by adhesive tape etc., including desiccants. Moreover, once and use it in time the storage bag is opened,
store POSCAP according to the table's Floor Life “Time” and “conditions”.
Intellectual property right
We, Panasonic Group are providing the product and service that customers can use without anxiety, and are
working positively on the protection of our products under intellectual property rights.
Representative patents relating to POSCAP are as follows:
US Patent Nos. 6168639 and 6313979
MSL Floor life
Time Conditions
2a 4 weeks < 30 °C/60 %Rh
3 168 hours < 30 °C/60 %Rh
5 48 hours < 30 °C/60 %Rh
(Conform to IPC/JEDEC J-STD-020)
Nov. 201501
Panasonic ., _ .' _ . ,1 5551085 2.5101015010300 471000 509 20 1.25 09 $100 $120 TPU > Lowprofe «00001010101001 5551085 6.3 100 150 809 35 2.8 09 5551085 6.31010 10010150 3310100 A09 32 1.6 09 5010115120 TPH 1001010110 55510105 25106.3 150 4710100 A09 32 1.6 09 Face d0w31erm'na1 5551085 25106.3 70 10010220 A14 32 1.6 14 55510105 2.510125 351070 3310220 810 35 2.8 11 Sma11s1ze TPG Lowpmfile Largecapac‘tance 55510105 2.51063 301070 150102208150 35 2.8 14 10w 5581511015120 TPSF 10900000000700 55510105 2.010 2.5 6109 Z70 132$ 35 2.8 19 Face Gown term 051 55510105 2.01010 111035 4710470 52 35 2.8 19 55510105 6.3 35 410 0155 73 4.3 14 TPE LOWESR 55510105 2.51010 71025 6810470 DZE 73 4.3 18 55510105 2.51010 91025 22010680 D31 73 4.3 28 55510105 2.51010 101025 33010500 D4 73 4.3 38 55510105 20 6 22010330 DZF 73 4.3 18 TPF L°WE5R 55510105 2.51010 51015 15010680 D31 73 4.3 28 Large capac tance 55510105 25106.3 51010 47010000 D4 73 4.3 38 55510105 4.01010 70 4710100 52 35 2.8 19 TA , 110010106111 \ 55510105 2.51010 91025 6810470 DZE 73 4.3 18 11010 0010101100051 55510105 2.51010 151025 15010080 D31 73 4.3 28 55510125 0.31010 25 010150 DZE 73 4.3 18 1—1911 '01100111y TV @uamrteed at '25 'C 110110010101001101102] 55510125 10 25 150 D31 73 4.3 28
Conductive Polymer Tantalum Solid Capacitors
Line up
Panasonic -. A . n .w ' ”_ l‘ I 75510105 35 300 2.7 815 3.5 28 1.4 75510105 161035 9010400 3.91033 82 3.5 2.8 1.9 55110105 10 40 33 D12 7.3 43 1.15 TQC H1913 voltage 55510105101025 55070 221047 D15 7.3 43 1.4 55510105101035 40101501010150 )2 7.3 43 1.9 75510105 101025 50:070 0810150 D3L 7.3 43 2.8 75510105 4.01010 70 331008 32 3.5 28 1.9 TPB Standard 75510105 4.01010 40 15010330 D3L 7.3 43 2.8 75510105 0.31010 351040 22010470 D4 7.3 43 3.8 55101050310125 551080 101047 01 3.5 28 1.1 TPC Low profile 75510105 0.31010 401045 0810330 )2 7.3 43 1.9 55510125 25100.3 151025 15010330 D2E 7.3 43 1.8 75510125 2.51010 401045 0310220 D2 7.3 43 1.9 Guaranteed TH at125"c 55510125401003 40 22010330 D3L 7.3 43 2.8 75510125 0.31010 351040 22010470 D4 7.3 43 3.8 55510125401003 151025 10010330 025 7.3 43 1.8 TC tha'fggc-Ccd 55510125 2.51010 51025 15010080 031 7.3 43 2.8 75510125 2.51010 51025 330101000 34 7.3 43 3.8
Conductive Polymer Tantalum Solid Capacitors
Line up
Panasonic — D3Lme Anvmmmvuc 150 uFto 320 Mr D4 savncmnvn 220 uFm no u; TPB 82m “mums mwc mmm 33 uFm [18 up TPC Law pram: B1 m mmnvzsmc IowmmF . D2 sue asvucmmm m u; v m 1r TPG 5m x we B1 G m min: mzsvuc 23 “mm hr 0 ZSVDCméHDC wounozzn n; O TPE Law ESP B2 size at v. mm 47 “F m m w lo D15Em a 3 vnc 470 LF A. DZEme zsvucmmvuc as M m 470 1.; [o D3L zswxm mu: m mu m w; 10 D4 sue zsyncmcvuc Emma sow TPF my. ESP La' :ABan'arLe 2 0 VDC zzu an 330 »F D3L mm. won 150 Mm m M D4 sue zawcumuc mmn mm Q EMU 31:9 2mmmzswt 2701;; O , m w- SO93:ze zavncmwwx Mum mo 1F Q 309 ezvnc 15w; zsvmmwm BALFIDYUOJF § ZSVDCméZ‘IX 1DD»FmZZD u; TH Guammuu a" 125 ‘ DZE we zzvnrmzvuc 150M1c330 ur Q D2 25w“; mm ss 1; m 22» uF Q D3Lsize mucwavnc 225 um 330 ..F D4 mm. mvnn 220 mu m up wummmc mu ma 330 v; 5 25mm mvuc 155 an m J D4 zsvxmwuc 339 1; mm 1; Hm whammy DC unvnn ATMYMODM Q DZE zsvucm 15ch 53 uF [3470 M Q D3L“: zsvuumvuc m uF w m M Q TV Hwh rrhab mmm D2E m 51ch unvnn ammo“; Q TQC Hmh when: 32 sue mmmxivuc ”was“; 0 —. D1 2 mch 33 “r A D1 5 macmzavuc 22 “non uF mncmssvuc vommsaur Q D3L“e m UDEMZS m: as “Ha 150 1;; Q
Conductive Polymer Tantalum Solid Capacitors
Diagram
Panasonic "-m- Rated voltage Series name Rated capacitance Capacitance tolerance Special code 1 to 3 figures 3 to 4 figures 2 to 4 figures 1 figure 0 to 4 figures i T — am TPB TPB 2 7 2R7 :20% M TPC TPC 3 9 3R9 TPE TPE 4 7 4R7 TPF TPF 5 6 5R6 TPG TPG 8 2 8R2 TPH TPH To 10 TPSF TPSF 15 15 TPU TPU 22 22 TAB TAB 33 33 TAE TAE 4‘7 47 THE THE 56 56 THC THC 68 68 THE THE 82 82 TQC TQC T00 T00 TVE TVE T20 T20 TCE TCE T50 T50 TCF TCF Standard Standard ESR 9mm max ESR 7mg max ESR 6m§2 max ESR 5m§2 max ESR TOmQ max ESR 5mm max ESR 5m: max ESR 35m§2 max ESR 25m!) max ESR 21 m9 max ESR 15m$2 max ESR 15m§2 300tz max ESR 35mm max BS'C ESR 25m§2 max ES'C ESR 1 SIM} max 85'C ESR T3m§l 300tz max 85'C ER TTmQ 300tz max 551: ESR 35m§2 max 85C ESR 25mm max 85’C ESR 25m§2 max ESR TBMQ max ESR 15m) max ESR TZmQ max ESR TOmQ max ESR 25mm max BS'C ESR 9mg: 500tz max 85'C $09 sue B09 sTZe D‘T SE 5sz DZE sTZe ance enLar ed Ca cutance emar ed Ca Ttance enlar d Ca acmance enlar ed Ca Tlance enla ed B size D’T 2 STZE DT 5 ste D2 ste ESR SSmQ max ESR 45m§2 max ESR 40mm max ESR 35mg max ESR lSmQ max ESR 15m§2 max ESR TZmQ max ESR 9m) max ESR 7m) max ESR 6m) max ESR 5mm max ESR 35m§2 300tz max ESR 3Dm§1 300tz max ESR 9mg 300kHz max ESR 67M) 500kHz max ESR AmD 500kHz max BTG ste ESR 35mg 300tz max ESR T EOmQ max ESR 100mg max ESR 70m§2 max A09 ste AT Aste D3L ste mmqmon—NE
Explanation of part numbers
Part number system
Conductive Polymer Tantalum Solid Capacitors
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
150 °C
200 °C
240 °C
Time (sec.)
40 s max
30 s max
120 s max
Temperature on the surface of capacitor
5 s max
Peak temperature
60 s
max
217 °C
200 °C
150 °C
260 °C
6 s max
5 s max
Peak
temperature
Time (sec.)
90 s max180 s max
60 s
max
Temperature on the surface of capacitor
220 °C
180 °C
150 °C
250 °C
40 s max
30 s max
120 s max
60 s
max
Time (sec.)
5 s max
Peak temperature
Temperature on the surface of capacitor
217 °C
200 °C
180 °C
150 °C
250 °C
Time (sec.)
70 s max120 s max
60 s max
10 s max
Peak temperature
Temperature on the surface of capacitor
aac
b
Mounting specifi cations
Recommendable refl ow soldering
Soldering with a soldering iron
Tip of a soldering iron : 350 °C max (TQC serise : 400 °C max) Power of a soldering iron : 30 W max
Working time : 3 sec. max (TQC serise : 5 sec max)
(Do not let the tip of soldering iron touch the POSCAP itself. Do not subject the POSCAP itself to excessive stress when soldering.)
<
Peak temperature 260 °C lead free refl ow soldering profi le
>
<
Recommended refl ow soldering temperature profi le
><
Peak temperature 250 °C lead free refl ow soldering profi le
>
<TQ C series>
The cycles of refl ow soldering : Twice (max)
The cycles of refl ow soldering : Twice (max)
The cycles of refl ow soldering : Twice (max)
The cycles of refl ow soldering : Twice (max)
The model of MSL “2a” is changed into
MSL “3” with this refl ow condition.
Land Pattern
Size code a b c
S09 1.0 0.9 0.6
A09, A14 1.6 1.4 1.0
B09, B1, B1G, B15G, B2, B2S 1.6 2.7 1.4
D12, D15, D15E, D2E, D2, D3L, D4
2.4 2.9 3.7
Unit : mm
Nov. 201501
Panasonic — 3mm we J Cumum em cuvaa'nvém 74’1er M?“ , ,,U, ,M,|fi #25 .1. J F G A . K
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
Sprocket hole
J
A
F
K
tGH
DE
C
Component compartment
(Polarity)
Direction of unreeling
(−)
(+)
B
W2
W1
A
B
C
c
a
b
Packing specifi cations
Dimension of carrier tape
Reel dimension Minimum packing quantity and weight
Dimension of packing case
Units per packing case
Size code A±0.1 B±0.1 C±0.3 D±0.05 E±0.1 F±0.1 G±0.05 H±0.1 J+0.1 K±0.1 t±0.05
S09 1.65 2.4 8.0 3.5 1.75 4.0 2.0 4.0 f1.5 1.3 0.25
A09 2.05 3.65 8.0 3.5 1.75 4.0 2.0 4.0 f1.5 1.3 0.25
A14 2.05 3.65 8.0 3.5 1.75 4.0 2.0 4.0 f1.5 1.7 0.25
B09 3.2 3.8 8.0 3.5 1.75 4.0 2.0 4.0 f1.5 1.4 0.25
B1 3.2 3.8 8.0 3.5 1.75 4.0 2.0 4.0 f1.5 1.4 0.25
B1G 3.25 3.9 8.0 3.5 1.75 4.0 2.0 4.0 f1.5 1.7 0.25
B15 3.3 3.8 8.0 3.5 1.75 4.0 2.0 4.0 f1.5 2.1 0.25
B15G 3.25 3.9 8.0 3.5 1.75 4.0 2.0 4.0 f1.5 1.7 0.25
B2 3.3 3.8 8.0 3.5 1.75 4.0 2.0 4.0 f1.5 2.1 0.25
B2S 3.25 4.0 8.0 3.5 1.75 4.0 2.0 4.0 f1.5 2.1 0.25
D12 4.5 7.5 12.0 5.5 1.75 8.0 2.0 4.0 f1.5 1.7 0.3
D15 4.5 7.5 12.0 5.5 1.75 8.0 2.0 4.0 f1.5 2.4 0.3
D15E 4.7 7.8 12.0 5.5 1.75 8.0 2.0 4.0 f1.5 1.7 0.3
D2E 4.5 7.5 12.0 5.5 1.75 8.0 2.0 4.0 f1.5 2.4 0.3
D2 4.5 7.5 12.0 5.5 1.75 8.0 2.0 4.0 f1.5 2.4 0.3
D3L 4.5 7.7 12.0 5.5 1.75 8.0 2.0 4.0 f1.5 3.2 0.3
D4 4.5 7.7 12.0 5.5 1.75 8.0 2.0 4.0 f1.5 4.2 0.3
Reel size f180 f330
a 90 120
b 240 360
c 240 360
Size code
Quantity (pcs./Reel, f180)
Typical weight (g)
S09, A09 3000 200
A14 2500 200
B09, B1 3000 200
B1G 2500 200
B15 2000 160
B15G 2500 200
B2, B2S 2000 200
Size code Pieces/case
S09, A09 15000
A14 12500
B09, B1 15000
B1G 12500
B15 10000
B15G 12500
B2, B2S 10000
Size code Pieces/case
D12 22500
D15 15000
D15E 20000
D2E, D2 15000
D3L 12500
D4 10000
Size code
Quantity (pcs./Reel, f330)
Typical weight (g)
D12 4500 1200
D15 3000 1000
D15E 4000 1000
D2E, D2 3000 1000
D3L 2500 1100
D4 2000 1200
0
Unit : mm
Unit : mm
Unit : mm
ABCW1W2
f330±2 f80±2 f13.0±0.2 13.5±0.5 17.5±1.0
f180 −3 f60±2 f13.0±0.2 9.0±0.5 11.4±1.0
0
Small order quantity (500 pcs/reel) is available with TPE,
TPF and TQC series. Please contact our sales
representative if you prefer it.
Dimension A and B are the measure of compartment's inside bottom. The (+) Polarity of the chip is placed on right side towards the unreeling direction.
Dimension of the topcover tape Thickness of cover tape: 62±10 μm Width of cover tape : 9.5±0.2 mm 5.5±0.2 mm (f180 reel)
Nov. 201501
Panasonic PoscAP $ Q
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
Lot. No.
R.Cap. code
R. Voltage code
Polarity
marking(+)
Lot. No.
R.Cap. code
R. Voltage code
Polarity marking(+)
W1
L
W
S
H
S
Small size, Low profi le (L2.0 × W 1.25 × H 0.9 mm)
Face down terminal type
RoHS compliance, Halogen free
Specifi cations
Features
Marking Dimensions (not to scale)
Characteristics list
Size code S09 B09
Category temperature range
–55 °C to +85 °C
Rated voltage range 2.5 V.DC to 10 V.DC 6.3 V.DC
Category voltage range 2.5 V.DC to 10 V.DC 6.3 V.DC
Rated capacitance range 4.7 µF to 100 µF 150 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d) Please see the attached characteristics list
Surge voltage (V.DC) Rated voltage × 1.15
Endurance
+85 °C, 1000 h, rated voltage applied
Capacitance change
Within ±20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current
Within the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 500 h, No-applied voltage
Capacitance change
Within +40 %, −20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current < 3 times of the initial limit
S09 Size
B09 Size
Size code L±0.1 1
W±0.1
1H±0.1 S±0.1 1W1±0.1
S09 2.0 1.25 0.9 0.5 0.9
B09 3.5 2.8 0.9 0.8 2.2
R. Voltage (V.DC)
2.5 4.0 6.3 10.0
Code eg j A
R. Cap. (F) 4.7 10 22 47 68 100
Code sAJSWA
R. Cap. (F) 150
Code E8
Series
Rated
voltage
(V.DC)
Rated
temp.
(°C)
Category
voltage
(V.DC)
Category
temp.
(°C)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard
LWH
Ripple
1
current
(mAr.m.s.)
ESR 2
(mΩ max.)
tan d 3LC 4
(µA) Part number
Min.
Packaging Q'ty
(pcs)
TPU
2.5 85 2.5 85 47 2.0 1.25 0.9
S09
510 150 0.10 23.5 2R5TPU47MSI 3000
85 2.5 85 100 2.0 1.25 0.9 510 150 0.10 50.0 ETPU100MSI 3000
4 85 4.0 85 68 2.0 1.25 0.9 510 150 0.10 54.4 4TPU68MSI 3000
6.3
85 6.3 85 10 2.0 1.25 0.9 400 250 0.10 6.3 6TPU10MSI 3000
85 6.3 85 22 2.0 1.25 0.9 510 150 0.10 27.7 6TPU22MSI 3000
85 6.3 85 47 2.0 1.25 0.9 510 150 0.10 59.2 6TPU47MSI 3000
85 6.3 85 150 3.5 2.8 0.9 B09 670 100 0.10 94.5 6TPU150MBI 3000
10 85 10.0 85 4.7 2.0 1.25 0.9 S09 360 300 0.10 4.7 10TPU4R7MSI 3000
1 Ripple current (100 kHz/ +45 °C ), 2 ESR (100 kHz/+20 °C) 3 tan d (120 Hz/+20 °C) 4 After 5 minutes
Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Unit : mm
1 ±0.2 : B09
S09 Size B09 Size
Externals of fi gure are the reference.
Surface Mount Type
Series : TPU
Nov. 201501
Panasonic 6% PoscAP
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
R.Cap. code
R. Voltage code
Year
Week
Polarity marking(+)
W1
H
L
W
S S
Polarity marking(+) R.Cap. code
R. Voltage code
Year
Week
W1
H
L
W
S S
Surface Mount Type
Series : TPH
Small size, Low profi le (L3.2 × W 1.6 × H 0.9 mm)
Face down terminal type
RoHS compliance, Halogen free
Size code A09 A14
Category temperature range
–55 °C to +105 °C / –55 °C to +85 °C (Rated temp. +85 °C)
Rated voltage range 2.5 V.DC to 10 V.DC 2.5 V.DC to 6.3 V.DC
Category voltage range 2.5 V.DC to 10 V.DC 2.5 V.DC to 6.3 V.DC
Rated capacitance range 33 µF to 100 µF 100 µF to 220 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d) Please see the attached characteristics list
Surge voltage (V.DC) Rated voltage × 1.15
Endurance
+105 °C, 1000 h rated voltage applied
Rated temp, +85 °C Products : +85 °C, 1000 h, rated voltage applied
Capacitance change
Within ±20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current
Within the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 500 h, No-applied voltage
Capacitance change
Within +50 %, −20 % of the initial value (ETPH220MABC)
Within +40 %, −20 % of the initial value (Except for above model)
tan d< 1.5 times of the initial limit
DC leakage current < 3 times of the initial limit
R. Voltage (V.DC)
2.5 4.0 6.3 10.0
Code eg j A
R. Cap. (F) 33 47 68 100 150 220
Code N7 S7 W7 A8 E8 J8
Series
Rated
voltage
(V.DC)
Rated
temp.
(°C)
Category
voltage
(V.DC)
Category
temp.
(°C)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard
LWH
Ripple
1
current
(mAr.m.s.)
ESR 2
(mΩ max.)
tan d 3LC 4
(µA) Part number
Min.
Packaging Q'ty
(pcs)
TPH
2.5 105 2.5 105 100 3.2 1.6 0.9 A09 510 150 0.10 25.0 ETPH100MHA 3000
85 2.5 85 220 3.2 1.6 1.4 A14 740 70 0.10 110.0 ETPH220MABC 2500
4105 4.0 105 68 3.2 1.6 0.9 A09 510 150 0.10 27.2 4TPH68MHA 3000
85 4.0 85 150 3.2 1.6 1.4 A14 740 70 0.10 120.0 4TPH150MABC 2500
6.3
105 6.3 105 47 3.2 1.6 0.9 A09 510 150 0.10 29.6 6TPH47MHA 3000
85 6.3 85 100 3.2 1.6 0.9 670 100 0.10 63.0 6TPH100MAEA 3000
85 6.3 85 100 3.2 1.6 1.4 A14 740 70 0.10 126.0 6TPH100MABC 2500
10 85 10.0 85 33 3.2 1.6 0.9 A09 510 150 0.10 33.0 ATPH33MAHA 3000
1 Ripple current (100 kHz/ +45 °C ), 2 ESR (100 kHz/+20 °C) 3 tan d (120 Hz/+20 °C) 4 After 5 minutes
Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Unit : mm
A09/A14 Size A09/A14 Size
A09 Size (6TPH100MAEA) A09 Size (6TPH100MAEA)
Size code L±0.2 W±0.2 H±0.1 S±0.2 W1±0.1
A09 3.2 1.6 0.9 0.8 1.2
A14 3.2 1.6 1.4 0.8 1.2
Externals of fi gure are the reference.
Specifi cations
Features
Characteristics list
Marking Dimensions (not to scale)
Nov. 201501
Panasonic PoscAP ® ®
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
R.Cap. code
Lot. No.
R. Voltage code
Polarity marking(+)
SW1
H
L
W
S
Surface Mount Type
Series : TPG
Small size, Low profi le (L3.5 × W 2.8 × H 1.1 mm)
Large capacitance (220 F max.)
RoHS compliance, Halogen free
Features
Size code B1G B15G
Category temperature range
–55 °C to +105 °C
Rated voltage range 2.5 V.DC to 12.5 V.DC 2.5 V.DC to 6.3 V.DC
Category voltage range 2.0 V.DC to 10.0 V.DC 2.0 V.DC to 5.0 V.DC
Rated capacitance range 33 µF to 220 µF 150 µF to 220 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d) Please see the attached characteristics list
Surge voltage (V.DC) Rated voltage × 1.15
Endurance
+85 °C, 1000 h rated voltage applied
Capacitance change
Within ±20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current
Within the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 500 h, No-applied voltage
Capacitance change
Within +40 %, −20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current < 3 times of the initial limit
Size code L+0.3 W+0.3 H±0.1 S±0.2 W1±0.1
B1G 3.5 2.8 1.1 0.8 2.2
B15G 3.5 2.8 1.4 0.8 2.2
R. Voltage (V.DC)
2.5 4.0 6.3 8.0 10.0 12.5
Code eg j kAB
R. Cap. (F) 33 47 100 150 220
Code N7 S7 A8 E8 J8
Series
Rated
voltage
(V.DC)
Rated
temp.
(°C)
Category
voltage
(V.DC)
Category
temp.
(°C)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard
LWH
Ripple
1
current
(mAr.m.s.)
ESR 2
(mΩ max.)
tan d 3LC 4
(µA) Part number
Min.
Packaging Q'ty
(pcs)
TPG
2.5 85 2.0 105 220 3.5 2.8 1.1 B1G 1000 70 0.10 55.0
2R5TPG220M
2500
85 2.0 105 3.5 2.8 1.4 B15G 1400
30/300 kHz
0.10 110.0
2R5TPG220MUG
2500
4 85 3.2 105 220 3.5 2.8 1.4 1000 70 0.10 88.0
4TPG220M
2500
6.3
85 5.0 105
100
3.5 2.8 1.1
B1G
1000 70 0.10 63.0
6TPG100M
2500
85 5.0 105 3.5 2.8 1.1 1100 55 0.10 63.0
6TPG100MG
2500
85 5.0 105 3.5 2.8 1.1 1200
35/300 kHz
0.10 126.0
6TPG100MZGD
2500
85 5.0 105 150 3.5 2.8 1.4 B15G 1000 70 0.10 94.5
6TPG150M
2500
85 5.0 105 3.5 2.8 1.4 1200
35/300 kHz
0.10 189.0
6TPG150MZG
2500
8 85 6.3 105 47 3.5 2.8 1.1
B1G
1000 70 0.10 37.6
8TPG47M
2500
10 85 8.0 105 47 3.5 2.8 1.1 1000 70 0.10 47.0
10TPG47M
2500
12.5 85 10.0 105 33 3.5 2.8 1.1 1000 70 0.10 41.3
12TPG33M
2500
1 Ripple current (100 kHz/ +45 °C ), 2 ESR (100 kHz/+20 °C) 3 tan d (120 Hz/+20 °C) 4 After 5 minutes
Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Unit : mm
−0.1 −0.1
Marking
Externals of fi gure are the reference.
Specifi cations
Dimensions (not to scale)
Characteristics list
Nov. 201501
Panasonic PoscAP . . I HLL‘
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
R.Cap. code Lot. No.
R. Voltage codePolarity marking(+)
W1
H
SS
L
W
Surface Mount Type
Series : TPSF
Super low ESR (6 mΩ max.)
Super low ESL (0.7 nH)
Face down terminal type
RoHS compliance, Halogen free
Size code B2S
Category temperature range
–55 °C to +105 °C
Rated voltage range 2.0 V.DC to 2.5 V.DC
Category voltage range 2.0 V.DC to 2.5 V.DC
Rated capacitance range 270 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d) Please see the attached characteristics list
Surge voltage (V.DC) Rated voltage × 1.15
Endurance
+105 °C, 1000 h rated voltage applied
Capacitance change
Within ±20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current
Within the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 500 h, No-applied voltage
Capacitance change
Within +40 %, −20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current < 3 times of the initial limit
Series
Rated
voltage
(V.DC)
Rated
temp.
(°C)
Category
voltage
(V.DC)
Category
temp.
(°C)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard
LWH
Ripple
1
current
(mAr.m.s.)
ESR 2
(mΩ max.)
tan d 3LC 4
(µA) Part number
Min.
Packaging Q'ty
(pcs)
TPSF 2105 2.0 105 270 3.5 2.8 1.9
B2S
3200
6/500 kHz
0.08 108 2TPSF270M6E 2000
105 2.0 105 3.5 2.8 1.9 2400
9/300 kHz
0.08 108 2TPSF270M9G 2000
2.5 105 2.5 105 270 3.5 2.8 1.9 3200
6/500 kHz
0.08 135 ETPSF270M6E 2000
Unit : mm
Marking
Size code L±0.2 W±0.2 H±0.1 S±0.3 W1±0.1
B2S 3.5 2.8 1.9 0.8 2.2
R. Voltage (V.DC)
2.0 2.5
Code de
R. Cap. (F) 270
Code L8 Externals of fi gure are the reference.
Dimensions (not to scale)
Characteristics list
Specifi cations
Features
1 Ripple current (100 kHz/ +45 °C ), 2 ESR (100 kHz/+20 °C) 3 tan d (120 Hz/+20 °C) 4 After 5 minutes
Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Nov. 201501
Panasonic POSCAP ® % ml W E; r”? S
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
Lot. No.
R.Cap. code
R. Voltage code
Polarity marking(+)
H
W1
S S
L
W
Small size (L 3.5×W 2.8×H 1.9 mm)
Low ESR (15 mΩ)
RoHS compliance, Halogen free
Surface Mount Type
Series : TPE
Size : B
Size code B2
Category temperature range
–55 °C to +105 °C
Rated voltage range 2.0 V.DC to 10 V.DC
Category voltage range 1.8 V.DC to 8.0 V.DC
Rated capacitance range 47 µF to 470 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d)Please see the attached characteristics list
Surge voltage (V.DC) Rated voltage × 1.15
Endurance
+105 °C, 1000 h rated voltage applied
Rated temp, +85 °C Products : +85 °C, 1000 h, rated voltage applied
Capacitance change
Within ±20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current Within the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 500 h, No-applied voltage
Capacitance change
Within +50 %, −20 % of the initial value
(2R5TPE220MAZB (MAPB, MAFB), 2R5TPE330MAZB,
2TPE330MAFB (MADGB), 2TPE470MAJGB (MAFB), 2TPE330MFB)
Within +40 %, −20 % of the initial value (Except for above model)
tan d< 1.5 times of the initial limit
DC leakage current < 3 times of the initial limit
Size code L±0.2 W±0.2 H±0.1 S±0.2 W1±0.1
B2 3.5 2.8 1.9 0.8 2.2
Unit : mm
Marking
R. Voltage (V.DC)
2.0 2.5 4.0 6.3 8.0 10.0
Code deg j kA
R. Cap. (F) 47 100 120 150 220 330 470
Code S7 A8 C8 E8 J8 N8 S8 Externals of fi gure are the reference.
Specifi cations
Features
Dimensions (not to scale)
Nov. 201501
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
Series
Rated
voltage
(V.DC)
Rated
temp.
(°C)
Category
voltage
(V.DC)
Category
temp.
(°C)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard
LWH
Ripple
1
current
(mAr.m.s.)
ESR 2
(mΩ max.)
tan d 3LC 4
(µA) Part number
Min.
Packaging Q'ty
(pcs)
TPE
2
105 2.0 105
330
3.5 2.8 1.9
B2
2000 15 0.08 132.0
2TPE330MFB
2000
85 1.8 105 3.5 2.8 1.9 2000 15 0.08 132.0
2TPE330MAFB
2000
85 1.8 105 3.5 2.8 1.9 2000
13/300 kHz
0.10 132.0
2TPE330MADGB
2000
85 1.8 105 470 3.5 2.8 1.9 2300 15 0.10 188.0
2TPE470MAFB
2000
85 1.8 105 3.5 2.8 1.9 2300
11/300 kHz
0.08 188.0
2TPE470MAJGB
2000
2.5
85 2.0 105
220
3.5 2.8 1.9 2000 15 0.08 110.0
2R5TPE220MAFB
2000
105 2.5 105 3.5 2.8 1.9 1800
15/300 kHz
0.08 110.0
2R5TPE220MFGB
2000
105 2.5 105 3.5 2.8 1.9 1700 21 0.08 55.0
2R5TPE220MLB
2000
85 2.0 105 3.5 2.8 1.9 1600 25 0.08 55.0
2R5TPE220MAPB
2000
105 2.5 105 3.5 2.8 1.9 1400 35 0.08 55.0
2R5TPE220MZB
2000
85 2.0 105 3.5 2.8 1.9 1400 35 0.08 55.0
2R5TPE220MAZB
2000
85 2.0 105 330 3.5 2.8 1.9 1400 35 0.08 82.5
2R5TPE330MAZB
2000
4
105 4.0 105 100 3.5 2.8 1.9 1400 35 0.08 40.0
4TPE100MZB
2000
85 3.2 105 150 3.5 2.8 1.9 1400 35 0.08 60.0
4TPE150MAZB
2000
85 3.2 105 220 3.5 2.8 1.9 1400 35 0.08 88.0
4TPE220MAZB
2000
6.3
105 6.3 105 100 3.5 2.8 1.9 1600 25 0.08 63.0
6TPE100MPB
2000
85 5.0 105 3.5 2.8 1.9 1400 35 0.08 63.0
6TPE100MAZB
2000
85 5.0 105 120 3.5 2.8 1.9 1400 35 0.08 75.6
6TPE120MAZB
2000
85 5.0 105 150 3.5 2.8 1.9 1600 25 0.08 94.5
6TPE150MAPB
2000
85 5.0 105 3.5 2.8 1.9 1400 35 0.08 94.5
6TPE150MAZB
2000
85 5.0 105 220 3.5 2.8 1.9 1400 35 0.10 138.6
6TPE220MAZB
2000
8 85 6.3 105 100 3.5 2.8 1.9 1400 35 0.08 80.0
8TPE100MAZB
2000
10 85 8.0 105 47 3.5 2.8 1.9 1400 35 0.08 47.0
10TPE47MAZB
2000
1 Ripple current (100 kHz/ +45 °C ), 2 ESR (100 kHz/+20 °C) 3 tan d (120 Hz/+20 °C) 4 After 5 minutes
Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Characteristics list
Nov. 201501
Panasonic ml E Em
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
Lot. No.
R.Cap. code
R. Voltage code
Polarity marking(+)
H
W1
S S
L
W
Low profi le (Height 1.5 mm max.)
Low ESR (7 mΩ)
Large capacitance (1500 F max.)
RoHS compliance, Halogen free
Surface Mount Type
Series : TPE
Size : D
Features
Size code D15E D2E D3L D4
Category temperature range
–55 °C to +105 °C
Rated voltage range 6.3 V.DC 2.5 V.DC to 10 V.DC
Category voltage range 5.0 V.DC 2.5 V.DC to 10 V.DC
Rated capacitance range 470 µF 68 µF to 470 µF 220 µF to 680 µF 330 µF to 1500 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d)Please see the attached characteristics list
Surge voltage (V.DC) Rated voltage × 1.15
Endurance
+105 °C, 2000 h rated voltage applied
Rated temp, +85 °C Products : +85 °C, 1000 h, rated voltage applied
6TPE330MAP, 6TPE470MAZU : +85 °C, 2000 h,
Capacitance change
Within ±20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current Within the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 500 h, No-applied voltage
Capacitance change
Within +50 %, −20 % of the initial value
(2R5TPE220M (I, F, 9), 2R5TPE330M (I, F, C, 9, 7),
2R5TPE470M (I, F, C, 9, 7), 2R5TPE1000MF, 2R5TPE1500M (F, C))
Within +40 %, −20 % of the initial value (Except for above model)
tan d< 1.5 times of the initial limit
DC leakage current < 3 times of the initial limit
Size code L±0.3 W±0.2 H±0.2 1S±0.2 W1±0.1
D15E 7.3 4.3 1.4 1.1 2.4
D2E 7.3 4.3 1.8 1.3 2.4
D3L 7.3 4.3 2.8 1.3 2.4
D4 7.3 4.3 3.8 1.3 2.4
Unit : mm
R. Voltage (V.DC)
2.5 4.0 6.3 10.0
Code eg j A Externals of fi gure are the reference.
1 ±0.1 :D15E, D2E
Marking Dimensions (not to scale)
Specifi cations
Nov. 201501
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
Characteristics list
Series
Rated
voltage
(V.DC)
Rated
temp.
(°C)
Category
voltage
(V.DC)
Category
temp.
(°C)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard
LWH
Ripple
1
current
(mAr.m.s.)
ESR 2
(mΩ max.)
tan d 3LC 4
(µA) Part number
Min.
Packaging Q'ty
(pcs)
TPE
2.5
105 2.5 105
220
7.3 4.3 1.8
D2E
3900 9 0.10 55.0
2R5TPE220M9
3000
105 2.5 105 7.3 4.3 1.8 3100 15 0.10 55.0
2R5TPE220MF
3000
105 2.5 105 7.3 4.3 1.8 2800 18 0.10 55.0
2R5TPE220MI
3000
105 2.5 105 7.3 4.3 1.8 2400 25 0.10 55.0
2R5TPE220M
3000
105 2.5 105
330
7.3 4.3 1.8 4400 7 0.10 82.5
2R5TPE330M7
3000
105 2.5 105 7.3 4.3 1.8 3900 9 0.10 82.5
2R5TPE330M9
3000
105 2.5 105 7.3 4.3 1.8 3500 12 0.10 82.5
2R5TPE330MC
3000
105 2.5 105 7.3 4.3 1.8 3100 15 0.10 82.5
2R5TPE330MF
3000
105 2.5 105 7.3 4.3 1.8 2800 18 0.10 82.5
2R5TPE330MI
3000
105 2.5 105 7.3 4.3 1.8 2400 25 0.10 82.5
2R5TPE330M
3000
105 2.5 105
470
7.3 4.3 1.8 4400 7 0.10 117.5
2R5TPE470M7
3000
105 2.5 105 7.3 4.3 1.8 3900 9 0.10 117.5
2R5TPE470M9
3000
105 2.5 105 7.3 4.3 1.8 3500 12 0.10 117.5
2R5TPE470MC
3000
105 2.5 105 7.3 4.3 1.8 3100 15 0.10 117.5
2R5TPE470MF
3000
105 2.5 105 7.3 4.3 1.8 2800 18 0.10 117.5
2R5TPE470MI
3000
105 2.5 105 680 7.3 4.3 2.8 D3L 3500 12 0.10 170.0
2R5TPE680MCL
2500
105 2.5 105 7.3 4.3 2.8 3100 15 0.10 170.0
2R5TPE680MFL
2500
105 2.5 105 1000 7.3 4.3 3.8
D4
3900 15 0.15 250.0
2R5TPE1000MF
2000
105 2.5 105 1500 7.3 4.3 3.8 4400 12 0.15 375.0
2R5TPE1500MC
2000
105 2.5 105 7.3 4.3 3.8 3900 15 0.15 375.0
2R5TPE1500MF
2000
4
105 4.0 105 150 7.3 4.3 1.8
D2E
2800 18 0.10 60.0
4TPE150MI
3000
105 4.0 105
220
7.3 4.3 1.8 3100 15 0.10 88.0
4TPE220MF
3000
105 4.0 105 7.3 4.3 1.8 2800 18 0.10 88.0
4TPE220MI
3000
105 4.0 105 7.3 4.3 1.8 2400 25 0.10 88.0
4TPE220M
3000
105 4.0 105 330 7.3 4.3 1.8 2800 18 0.10 132.0
4TPE330MI
3000
105 4.0 105 7.3 4.3 1.8 2400 25 0.10 132.0
4TPE330M
3000
105 4.0 105
470
7.3 4.3 2.8
D3L
3500 12 0.10 188.0
4TPE470MCL
2500
105 4.0 105 7.3 4.3 2.8 3100 15 0.10 188.0
4TPE470MFL
2500
105 4.0 105 7.3 4.3 2.8 2800 18 0.10 188.0
4TPE470MIL
2500
105 4.0 105 7.3 4.3 2.8 2400 25 0.10 188.0
4TPE470ML
2500
6.3
105 6.3 105 100 7.3 4.3 1.8
D2E
2800 18 0.10 63.0
6TPE100MI
3000
105 6.3 105 7.3 4.3 1.8 2400 25 0.10 63.0
6TPE100M
3000
105 6.3 105
150
7.3 4.3 1.8 3100 15 0.10 94.5
6TPE150MF
3000
105 6.3 105 7.3 4.3 1.8 2800 18 0.10 94.5
6TPE150MI
3000
105 6.3 105 7.3 4.3 1.8 2400 25 0.10 94.5
6TPE150M
3000
105 6.3 105
220
7.3 4.3 1.8 2800 18 0.10 138.6
6TPE220MI
3000
105 6.3 105 7.3 4.3 1.8 2400 25 0.10 138.6
6TPE220M
3000
85 5.0 105 7.3 4.3 1.8 2400 25 0.10 138.6
6TPE220MAP
3000
85 5.0 105
330
7.3 4.3 1.8 2400 25 0.10 207.9
6TPE330MAP
3000
85 5.0 105 7.3 4.3 2.8
D3L
2400 25 0.10 207.9
6TPE330MAL
2500
85 5.0 105 7.3 4.3 2.8 3900
9/500 Hz
0.10 207.9
6TPE330MA9EL
2500
105 6.3 105 7.3 4.3 2.8 3100 15 0.10 207.9
6TPE330MFL
2500
105 6.3 105 7.3 4.3 2.8 2800 18 0.10 207.9
6TPE330MIL
2500
105 6.3 105 7.3 4.3 2.8 2400 25 0.10 207.9
6TPE330ML
2500
85 5.0 105 7.3 4.3 3.8 D4 4400 10 0.10 207.9
6TPE330MAA
2000
85 5.0 105
470
7.3 4.3 1.4 D15E 1700 35 0.10 296.1
6TPE470MAZU
4000
105 6.3 105 7.3 4.3 3.8
D4
3500 18 0.15 296.1
6TPE470MI
2000
105 6.3 105 7.3 4.3 3.8 3000 25 0.15 296.1
6TPE470M
2000
105 6.3 105 680 7.3 4.3 3.8 3500 18 0.15 428.4
6TPE680MI
2000
105 6.3 105 7.3 4.3 3.8 3000 25 0.15 428.4
6TPE680M
2000
10
105 10.0 105 68 7.3 4.3 1.8 D2E 2400 25 0.10 68.0
10TPE68M
3000
105 10.0 105 220 7.3 4.3 2.8 D3L 2800 18 0.10 220.0
10TPE220MIL
2500
105 10.0 105 7.3 4.3 2.8 2400 25 0.10 220.0
10TPE220ML
2500
105 10.0 105 330 7.3 4.3 3.8 D4 3000 25 0.10 330.0
10TPE330M
2000
1 Ripple current (100 kHz/ +45 °C ), 2 ESR (100 kHz/+20 °C) 3 tan d (120 Hz/+20 °C) 4 After 5 minutes
Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Nov. 201501
Panasonic PoscAP % $ %
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
R.Cap. code
R. Voltage code Lot. No.
Polarity marking(+)
L
W
SW1
H
S
Surface Mount Type
Series : TPF
Super low ESR (5 mΩ max.)
Large capacitance (1000 F max.)
RoHS compliance, Halogen free
Size code D2E D3L D4
Category temperature range
–55 °C to +105 °C
Rated voltage range 2.0 V.DC 2.5 V.DC to 10 V.DC 2.5 V.DC to 6.3 V.DC
Category voltage range 2.0 V.DC 2.5 V.DC to 10 V.DC 2.5 V.DC to 6.3 V.DC
Rated capacitance range 220 µF to 330 µF 150 µF to 680 µF 470 µF to 1000 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d)Please see the attached characteristics list
Surge voltage (V.DC) Rated voltage × 1.15
Endurance
+105 °C, 2000 h rated voltage applied
Capacitance change
Within ±20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current Within the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 500 h, No-applied voltage
Capacitance change
Within +50 %, −20 % of the initial value
(2TPF220M6, 2TPF330M6, ETPF1000M6H (5H))
Within +40 %, −20 % of the initial value (Except for above model)
tan d< 1.5 times of the initial limit
DC leakage current < 3 times of the initial limit
Size code L±0.3 W±0.2 H±0.2 1S±0.2 W1±0.1
D2E 7.3 4.3 1.8 1.3 2.4
D3L 7.3 4.3 2.8 1.3 2.4
D4 7.3 4.3 3.8 1.3 2.4
R. Voltage (V.DC)
2.0 2.5 4.0 6.3 10.0
Code deg j A
Unit : mm
Externals of fi gure are the reference.
1 ±0.1 :D2E
Features
Specifi cations
Marking Dimensions (not to scale)
Nov. 201501
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
Characteristics list
Series
Rated
voltage
(V.DC)
Rated
temp.
(°C)
Category
voltage
(V.DC)
Category
temp.
(°C)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard
LWH
Ripple
1
current
(mAr.m.s.)
ESR 2
(mΩ max.)
tan d 3LC 4
(µA) Part number
Min.
Packaging Q'ty
(pcs)
TPF
2105 2.0 105 220 7.3 4.3 1.8 D2E 4700 6 0.10 88.0
2TPF220M6
3000
105 2.0 105 330 7.3 4.3 1.8 4700 6 0.10 132.0
2TPF330M6
3000
2.5
105 2.5 105 330 7.3 4.3 2.8
D3L
4400 7 0.10 82.5
2R5TPF330M7L
2500
105 2.5 105
470
7.3 4.3 2.8 4400 6 0.10 117.5
2R5TPF470M6L
2500
105 2.5 105 7.3 4.3 2.8 4400 7 0.10 117.5
2R5TPF470M7L
2500
105 2.5 105 7.3 4.3 2.8 4400 10 0.10 117.5
2R5TPF470ML
2500
105 2.5 105 7.3 4.3 3.8 D4 6100 5 0.10 117.5
ETPF470M5H
2000
105 2.5 105
680
7.3 4.3 2.8
D3L
4400 6 0.10 170.0
2R5TPF680M6L
2500
105 2.5 105 7.3 4.3 2.8 4400 7 0.10 170.0
2R5TPF680M7L
2500
105 2.5 105 7.3 4.3 2.8 4400 10 0.10 170.0
2R5TPF680ML
2500
105 2.5 105 7.3 4.3 3.8
D4
6100 5 0.10 170.0
ETPF680M5H
2000
105 2.5 105 1000 7.3 4.3 3.8 6100 5 0.10 250.0
ETPF1000M5H
2000
105 2.5 105 7.3 4.3 3.8 5600 6 0.10 250.0
ETPF1000M6H
2000
4
105 4.0 105 330 7.3 4.3 2.8 D3L 4000 12 0.10 132.0
4TPF330ML
2500
105 4.0 105 470 7.3 4.3 2.8 4400 10 0.10 188.0
4TPF470ML
2500
105 4.0 105 680 7.3 4.3 3.8 D4 4400 10 0.10 272.0
4TPF680MAH
2000
6.3
105 6.3 105
220
7.3 4.3 2.8
D3L
6100 5 0.10 138.6
6TPF220M5L
2500
105 6.3 105 7.3 4.3 2.8 4600 9 0.10 138.6
6TPF220M9L
2500
105 6.3 105 7.3 4.3 2.8 4000 12 0.10 138.6
6TPF220ML
2500
105 6.3 105 330 7.3 4.3 2.8 3900 9 0.10 207.9
6TPF330M9L
2500
105 6.3 105 470 7.3 4.3 3.8 D4 4400 10 0.10 296.1
6TPF470MAH
2000
10 105 10.0 105 150 7.3 4.3 2.8 D3L 3600 15 0.10 150.0
10TPF150ML
2500
1 Ripple current (100 kHz/ +45 °C ), 2 ESR (100 kHz/+20 °C) 3 tan d (120 Hz/+20 °C) 4 After 5 minutes
Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Nov. 201501
Panasonic PoscAp $@$ [all LE9: {fig}: ”L FLW [E E [
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
R.Cap. code
R. Voltage code
Lot. No.
Polarity
marking(+)
R.Cap. code
Polarity
marking(+)
Lot. No.
R. Voltage code
L
W
SW1
H
S
Guaranteed at 85 °C 85 %RH
RoHS compliance, Halogen free
Features
Surface Mount Type
Series : TA
Size code B2 D2E D3L
Category temperature range
–55 °C to +105 °C
Rated voltage range 4 V.DC to 10 V.DC 2.5 V.DC to 10 V.DC
Category voltage range 4 V.DC to 10 V.DC 2.5 V.DC to 10 V.DC
Rated capacitance range 47µF to 100 µF 68 µF to 470 µF 150 µF to 680 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d) Please see the attached characteristics list
Surge voltage (V.DC) Rated voltage × 1.15
Endurance
+105 °C, 2000 h, (B2 size : 1000 h) rated voltage applied
Capacitance change
Within ±20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current Within the initial limit
Damp heat
(Steady State)
+85 °C, 85 % to 90 %, 500 h, rated voltage applied
Capacitance change
Within +50 %, −20 % of the initial value (2R5TAE470M(F), 2R5TAE330M(F, I), 2R5TAE220M(F, 9))
Within +40 %, −20 % of the initial value (Except for above model)
tan d< 1.5 times of the initial limit
DC leakage current Within the initial limit
Series
Rated
voltage
(V.DC)
Rated
temp.
(°C)
Category
voltage
(V.DC)
Category
temp.
(°C)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard
LWH
Ripple 1
current
(mAr.m.s.)
ESR 2
(mΩ max.)
tan d 3LC 4
(µA) Part number
Min.
Packaging Q'ty
(pcs)
TA
2.5
105 2.5 105
220
7.3 4.3 1.8
D2E
3900 9 0.10 110.0 2R5TAE220M9 3000
105 2.5 105 7.3 4.3 1.8 3100 15 0.10 55.0 2R5TAE220MF 3000
105 2.5 105 7.3 4.3 1.8 2400 25 0.10 55.0 2R5TAE220M 3000
105 2.5 105
330
7.3 4.3 1.8 3100 15 0.10 82.5 2R5TAE330MF 3000
105 2.5 105 7.3 4.3 1.8 2800 18 0.10 82.5 2R5TAE330MI 3000
105 2.5 105 7.3 4.3 1.8 2400 25 0.10 82.5 2R5TAE330M 3000
105 2.5 105 470 7.3 4.3 1.8 3100 15 0.10 117.5 2R5TAE470MF 3000
105 2.5 105 7.3 4.3 1.8 2400 25 0.10 117.5 2R5TAE470M 3000
105 2.5 105 680 7.3 4.3 2.8 D3L 3100 15 0.10 170.0 2R5TAE680MFL 2500
105 2.5 105 7.3 4.3 2.8 2400 25 0.10 170.0 2R5TAE680ML 2500
4
105 4.0 105 100 3.8 2.8 1.9 B2 1100 70 0.08 40.0 4TAB100M 2000
105 4.0 105 220 7.3 4.3 1.8 D2E 2800 18 0.10 88.0 4TAE220MI 3000
105 4.0 105 7.3 4.3 1.8 2400 25 0.10 88.0 4TAE220M 3000
105 4.0 105 470 7.3 4.3 2.8 D3L 2800 18 0.10 188.0 4TAE470MIL 2500
105 4.0 105 7.3 4.3 2.8 2400 25 0.10 188.0 4TAE470ML 2500
6.3
105 6.3 105 47 3.5 2.8 1.9 B2 1100 70 0.08 29.6 6TAB47M 2000
105 6.3 105 68 3.5 2.8 1.9 1100 70 0.08 42.8 6TAB68M 2000
105 6.3 105 150 7.3 4.3 1.8
D2E
2400 25 0.10 94.5 6TAE150M 3000
105 6.3 105 220 7.3 4.3 1.8 2800 18 0.10 138.6 6TAE220MI 3000
105 6.3 105 7.3 4.3 1.8 2400 25 0.10 138.6 6TAE220M 3000
105 6.3 105 330 7.3 4.3 2.8 D3L 2400 25 0.10 207.9 6TAE330ML 2500
10
105 10.0 105 47 3.5 2.8 1.9 B2 1100 70 0.08 47.0 10TAB47M 2000
105 10.0 105 68 7.3 4.3 1.8 D2E 2400 25 0.10 68.0 10TAE68M 3000
105 10.0 105 150 7.3 4.3 2.8 D3L 2400 25 0.10 150.0 10TAE150ML 2500
105 10.0 105 220 7.3 4.3 2.8 2400 25 0.10 220.0 10TAE220ML 2500
1 Ripple current (100 kHz/ +45 °C ), 2 ESR (100 kHz/+20 °C) 3 tan d (120 Hz/+20 °C) 4 After 5 minutes
Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Size
Code
L±0.3
1
W±0.2
H±0.2
2
S±0.2
W1±0.1
B2 3.5 2.8 1.9 0.8 2.2
D2E 7.3 4.3 1.8 1.3 2.4
D3L 7.3 4.3 2.8 1.3 2.4
R. Voltage
(V.DC)
2.5 4.0 6.3
10.0
Code e g j A
R. Cap.
(F)
47 68
100
Code
S7 W7 A8
Unit : mm
Externals of fi gure are the reference.
1 ±0.2 : B2
2 ±0.1 : B2, D2E
B2
Size
D2E, D3L Size B2
Size
Marking Dimensions (not to scale)
Characteristics list
Specifi cations
Nov. 201501
Panasonic PoscAp -
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
R.Cap. code
R. Voltage code Lot. No.
Polarity
marking(+)
L
W
SW1
H
S
Surface Mount Type
Series : TV
Guaranteed at 85 °C 85 %RH
Guaranteed at 125 °C
RoHS compliance, Halogen free
Specifi cations
Features
Characteristics list
Size code D2E D3L
Category temperature range
–55 °C to +125 °C
Rated voltage range 6.3 V.DC to 10 V.DC 10 V.DC
Category voltage range 4.0 V.DC to 6.3 V.DC 6.3 V.DC
Rated capacitance range 68 µF to 150 µF 150 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d)Please see the attached characteristics list
Surge voltage (V.DC) Rated voltage × 1.15
Endurance
+125 °C, 1000 h, category voltage applied (+105 °C 2000 h, rated voltage applied)
temp. 125 °C 105 °C
Capacitance change
Within ±20 % of the initial value Within ±20 % of the initial value
tan d< 2 times of the initial limit < 1.5 times of the initial limit
Damp heat
(Steady State)
DC leakage current < 2 times of the initial limit Within the initial limit
+85 °C, 85 % to 90 %, 500 h, rated voltage applied
Capacitance change
Within +40 %, −20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current Within the initial limit
Size code L±0.3
W±0.2
1H±0.2 S±0.2 W1±0.1
D2E 7.3 4.3 1.8 1.3 2.4
D3L 7.3 4.3 2.8 1.3 2.4
R. Voltage (V.DC)
6.3 10.0
Code jA
Series
Rated
voltage
(V.DC)
Rated
temp.
(°C)
Category
voltage
(V.DC)
Category
temp.
(°C)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard
LWH
Ripple
1
current
(mAr.m.s.)
ESR 2
(mΩ max.)
tan d 3LC 4
(µA) Part number
Min.
Packaging Q'ty
(pcs)
TV
6.3 105 4.0 125 150 7.3 4.3 1.8 D2E 2400 25 0.10 94.5 6TVE150M 3000
10 105 6.3 125 68 7.3 4.3 1.8 2400 25 0.10 68.0 10TVE68M 3000
105 6.3 125 150 7.3 4.3 2.8 D3L 2400 25 0.10 150.0 10TVE150ML 2500
1 Ripple current (100 kHz/ +45 °C ), 2 ESR (100 kHz/+20 °C) 3 tan d (120 Hz/+20 °C) 4 After 5 minutes
Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Unit : mm
1 ±0.1 : D2E
Externals of fi gure are the reference.
Marking Dimensions (not to scale)
Nov. 201501
Panasonic PoscAP g $
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
R.Cap. code
Lot. No.
R. Voltage code
Polarity marking(+)
SW1
H
L
W
S
Surface Mount Type
Series : TQC
Size : B
High voltage (35 V.DC max.)
RoHS compliance, Halogen free
Features
Characteristics list
Size code B15 B2
Category temperature range
–55 °C to +105 °C
Rated voltage range 35 V.DC 16 V.DC to 35 V.DC
Category voltage range 35 V.DC 16 V.DC to 35 V.DC
Rated capacitance range 2.7 µF 3.9 µF to 33 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d)Please see the attached characteristics list
Surge voltage (V.DC) Rated voltage × 1.15
Endurance
+105 °C, 2000 h (16TQC33MYFB : 1000 h), rated voltage applied
Capacitance change
Within ±20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current Within the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 500 h, No-applied voltage
Capacitance change
Within +40 %, −20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current < 3 times of the initial limit
Size code L±0.2 W±0.2 H±0.1 S±0.2 W1±0.1
B15 3.5 2.8 1.4 0.8 2.2
B2 3.5 2.8 1.9 0.8 2.2
R. Voltage (V.DC)
16 20 25 35
Code CDE V
R. Cap. (F) 2.7 3.9 5.6 8.2 10 15 22 33
Code L6 Q6 U6 Y6 A7 E7 J7 N7
Series
Rated
voltage
(V.DC)
Rated
temp.
(°C)
Category
voltage
(V.DC)
Category
temp.
(°C)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard
LWH
Ripple
1
current
(mAr.m.s.)
ESR 2
(mΩ max.)
tan d 3LC 4
(µA) Part number
Min.
Packaging Q'ty
(pcs)
TQC
16
105 16.0 105 10 3.5 2.8 1.9
B2
800 100 0.10 48.0
16TQC10M
2000
105 16.0 105 15 3.5 2.8 1.9 1000 90 0.10 72.0
16TQC15M
2000
105 16.0 105 33 3.5 2.8 1.9 1000 90 0.10 158.4
16TQC33MYFB
2000
20 105 20.0 105 8.2 3.5 2.8 1.9 800 100 0.10 49.2
20TQC8R2M
2000
105 20.0 105 22 3.5 2.8 1.9 1100 90 0.10 132.0
20TQC22MYFB
2000
25 105 25.0 105 5.6 3.5 2.8 1.9 800 100 0.10 42.0
25TQC5R6M
2000
105 25.0 105 15 3.5 2.8 1.9 900 100 0.10 112.5
25TQC15MYFB
2000
35 105 35.0 105 2.7 3.5 2.8 1.4 B15 800 300 0.10 47.3
35TQC2R7MYF
2000
105 35.0 105 3.9 3.5 2.8 1.9 B2 500 400 0.10 40.9
35TQC3R9MYF
2000
1 Ripple current (100 kHz/ +105 °C ), 2 ESR (100 kHz/+20 °C) 3 tan d (120 Hz/+20 °C) 4 After 5 minutes
Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Unit : mm
Marking Dimensions (not to scale)
Externals of fi gure are the reference.
Specifi cations
Nov. 201501
Panasonic PoscAP §§§§
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
R.Cap. code
Lot. No.
R. Voltage code
Polarity marking(+)
SW1
H
L
W
S
Surface Mount Type
Series : TQC
Size : D
High voltage (35 V.DC max.)
RoHS compliance, Halogen free
Size code D12 D15 D2 D3L
Category temperature range
–55 °C to +105 °C
Rated voltage range 16 V.DC 16 V.DC to 25 V.DC 16 V.DC to 35 V.DC 16 V.DC to 25 V.DC
Category voltage range 16 V.DC 16 V.DC to 25 V.DC 16 V.DC to 35 V.DC 16 V.DC to 25 V.DC
Rated capacitance range 33 µF 22 µF to 47 µF 10 µF to 100 µF 68 µF to 150 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d)Please see the attached characteristics list
Surge voltage (V.DC) Rated voltage × 1.15
Endurance
+105 °C, 2000 h, rated voltage applied
Capacitance change
Within ±20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current Within the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 500 h, No-applied voltage
Capacitance change
Within +40 %, −20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current < 3 times of the initial limit
R. Voltage (V.DC)
16 20 25 35
Code C D 1E V
Series
Rated
voltage
(V.DC)
Rated
temp.
(°C)
Category
voltage
(V.DC)
Category
temp.
(°C)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard
LWH
Ripple
1
current
(mAr.m.s.)
ESR 2
(mΩ max.)
tan d 3LC 4
(µA) Part number
Min.
Packaging Q'ty
(pcs)
TQC
16
105 16.0 105 33 7.3 4.3 1.15 D12 1800 40 0.10 52.8 16TQC33MYFS 4500
105 16.0 105 7.3 4.3 1.9 D2 1400 70 0.10 52.8 16TQC33MYFD 3000
105 16.0 105
47
7.3 4.3 1.4 D15 1500 55 0.10 75.2 16TQC47MYFT 3000
105 16.0 105 7.3 4.3 1.9
D2
1800 40 0.10 75.2 16TQC47MW 3000
105 16.0 105 7.3 4.3 1.9 1450 55 0.10 75.2 16TQC47MYFD 3000
105 16.0 105 68 7.3 4.3 1.9 1500 50 0.10 108.8 16TQC68MYF 3000
105 16.0 105 100 7.3 4.3 1.9 1800 50 0.10 160.0 16TQC100MYF 3000
105 16.0 105 150 7.3 4.3 2.8 D3L 1800 50 0.10 240.0 16TQC150MYF 2500
105 16.0 105 150 7.3 4.3 1.9
D2
1500 70 0.15 240.0 1CTQC15173F1 3000
20
105 20.0 105 33 7.3 4.3 1.9 1400 60 0.10 66.0 20TQC33MYFD 3000
105 20.0 105 47 7.3 4.3 1.9 1450 55 0.10 94.0 20TQC47MYF 3000
105 20.0 105 7.3 4.3 1.4 D15 1500 55 0.10 94.0 20TQC47MYFT 3000
105 20.0 105 100 7.3 4.3 2.8 D3L 1700 55 0.10 200.0 20TQC100MYF 2500
25
105 25.0 105 15 7.3 4.3 1.9
D2
1500 45 0.10 38.0 25TQC15MV 3000
105 25.0 105 7.3 4.3 1.9 1000 90 0.10 38.0 25TQC15MYFD 3000
105 25.0 105
22
7.3 4.3 1.9 1500 45 0.10 55.0 25TQC22MV 3000
105 25.0 105 7.3 4.3 1.9 1400 60 0.10 55.0 25TQC22MYFD 3000
105 25.0 105 7.3 4.3 1.4 D15 1400 70 0.10 55.0 25TQC22MYFT 3000
105 25.0 105 33 7.3 4.3 1.9 D2 1400 60 0.10 82.5 25TQC33MYF 3000
105 25.0 105 68 7.3 4.3 2.8 D3L 1400 70 0.10 170.0 25TQC68MYF 2500
35
105 35.0 105 10 7.3 4.3 1.9
D2
1000 120 0.10 35.0 35TQC10M 3000
105 35.0 105 7.3 4.3 1.9 1000 120 0.10 35.0 35TQC10MYF 3000
105 35.0 105 15 7.3 4.3 1.9 900 150 0.10 52.5 35TQC15MYF 3000
1 Ripple current (100 kHz/ +105 °C ), 2 ESR (100 kHz/+20 °C) 3 tan d (120 Hz/+20 °C) 4 After 5 minutes
Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Unit : mm
Externals of fi gure are the reference.
1 ±0.3 : D3L
2 ±0.05 : D12, ±0.2 : D3L
Features
Specifi cations
Characteristics list
Marking Dimensions (not to scale)
Size
code
L±0.2
W±0.2 H±0.1
S±0.2
W1±0.1
D12 7.3 4.3 1.15 1.3 2.4
D15 7.3 4.3 1.4 1.3 2.4
D2 7.3 4.3 1.9 1.3 2.4
D3L 7.3 4.3 2.8 1.3 2.4
12
Nov. 201501
Panasonic PoscAp 0‘. LE4; 3w
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
R.Cap. code
R. Voltage code Lot. No.
Polarity marking(+)
R. Voltage code Lot. No.
R.Cap. code
Polarity marking(+)
R. Voltage code Lot. No.
R.Cap. code
Polarity marking(+)
L
SS
W1
W
H
Surface Mount Type
Series : TPB
Standard
RoHS compliance, Halogen free
Size code B2 D3L D4
Category temperature range
–55 °C to +105 °C
Rated voltage range 4 V.DC to 10 V.DC 6.3 V.DC to 10 V.DC
Category voltage range 4 V.DC to 10 V.DC 6.3 V.DC to 10 V.DC
Rated capacitance range 33 µF to 68 µF 150 µF to 330 µF 220 µF to 470 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d) Please see the attached characteristics list
Surge voltage (V.DC) Rated voltage × 1.15
Endurance
+105 °C 2000h, (B2 size : 1000h) rated voltage appled
Rated temp. +85 °C 1000h rated voltage applied
Capacitance change
Within ±20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current Within the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 500 h, No-applied voltage
Capacitance change
Within +40 %, −20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current < 3 times of the initial limit
Size code L±0.3 1W±0.2 H±0.2 2S±0.2 W1±0.1
B2 3.5 2.8 1.9 0.8 2.2
D3L 7.3 4.3 2.8 1.3 2.4
D4 7.3 4.3 3.8 1.3 2.4
定格電圧 (V.DC)
2.0 2.5 4.0 6.3 10.0
記号 deg j A
Series
Rated
voltage
(V.DC)
Rated
temp.
(°C)
Category
voltage
(V.DC)
Category
temp.
(°C)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard
LWH
Ripple
1
current
(mAr.m.s.)
ESR 2
(mΩ max.)
tan d 3LC 4
(µA) Part number
Min.
Packaging Q'ty
(pcs)
TPB
4.0 105 4.0 105 68 3.5 2.8 1.9 B2 1100 70 0.08 27.2 4TPB68M 2000
105 4.0 105 330 7.3 4.3 2.8 D3L 2000 40 0.10 132.0 4TPB330ML 2500
6.3
105 6.3 105 68 3.5 2.8 1.9 B2 1100 70 0.08 42.8 6TPB68M 2000
105 6.3 105 220 7.3 4.3 2.8
D3L
2000 40 0.10 138.6 6TPB220ML 2500
85 5.0 105
330
7.3 4.3 2.8 2000 40 0.10 207.9 6TPB330MAL 2500
105 6.3 105 7.3 4.3 2.8 2000 40 0.10 207.9 6TPB330ML 2500
105 6.3 105 7.3 4.3 3.8 D4 3000 40 0.10 207.9 6TPB330M 2000
105 6.3 105 470 7.3 4.3 3.8 3000 35 0.15 296.1 6TPB470M 2000
10
105 10.0 105 33 3.5 2.8 1.9 B2 1100 70 0.08 33.0 10TPB33M 2000
105 10.0 105 47 3.5 2.8 1.9 1100 70 0.08 47.0 10TPB47M 2000
105 10.0 105 150 7.3 4.3 2.8 D3L 2000 40 0.10 150.0 10TPB150ML 2500
105 10.0 105 220 7.3 4.3 2.8 2000 40 0.10 220.0 10TPB220ML 2500
105 10.0 105 7.3 4.3 3.8 D4 3000 40 0.10 220.0 10TPB220M 2000
105 10.0 105 330 7.3 4.3 3.8 3000 35 0.10 330.0 10TPB330M 2000
1 Ripple current (100 kHz/ +45 °C ), 2 ESR (100 kHz/+20 °C) 3 tan d (120 Hz/+20 °C) 4 After 5 minutes
Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Unit : mm
Externals of fi gure are the reference.
1 ±0.2 : B2 2 ±0.1 : B2
B2 Size D4 Size
D3L Size
R. Voltage (V.DC)
4.0 6.3 10.0
Code gjA
R. Cap. (F)
33 47 68
Code N7 S7 W7
B2 Size
Features
Specifi cations
Marking Dimensions (not to scale)
Characteristics list
Nov. 201501
Panasonic PoscAP .‘
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
SW1
H
L
W
S
R. Voltage code Lot. No.
R.Cap. code
Polarity marking(+)
R. Voltage code Lot. No.
R.Cap. code
Polarity marking(+)
Surface Mount Type
Series : TPC
Features
Low profi le (Height 1.1 mm)
RoHS compliance, Halogen free
Size code B1 D2
Category temperature range
–55 °C to +105 °C
Rated voltage range 6.3 V.DC to 12.5 V.DC 6.3 V.DC to 10 V.DC
Category voltage range 5.0 V.DC to 10.0 V.DC 6.3 V.DC to 10 V.DC
Rated capacitance range 10 µF to 47 µF 68 µF to 330 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d) Please see the attached characteristics list
Surge voltage (V.DC) Rated voltage × 1.15
Endurance
+105 °C 2000h, (B1 size : 1000h) rated voltage appled
Rated temp. +85 °C 1000h rated voltage applied
Capacitance change
Within ±20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current Within the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 500 h, No-applied voltage
Capacitance change
Within +40 %, −20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current < 3 times of the initial limit
Size code L±0.2 W±0.2 H±0.1 S±0.2 W1±0.1
B1 3.5 2.8 1.1 0.8 2.2
D2 7.3 4.3 1.9 1.3 2.4
R. Voltage (V.DC)
6.3 8.0 10.0 12.5
Code jkAB
R. Cap. (F) 10 15 22 33 47
Code A7 E7 J7 N7 S7
Series
Rated
voltage
(V.DC)
Rated
temp.
(°C)
Category
voltage
(V.DC)
Category
temp.
(°C)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard
LWH
Ripple
1
current
(mAr.m.s.)
ESR 2
(mΩ max.)
tan d 3LC 4
(µA) Part number
Min.
Packaging Q'ty
(pcs)
TPC
6.3
85 5.0 105 47 3.5 2.8 1.1 B1 1100 55 0.10 29.6 6TPC47M 3000
85 5.0 105 3.5 2.8 1.1 1000 70 0.10 29.6 6TPC47MB 3000
105 6.3 105 100 7.3 4.3 1.9 D2 1700 45 0.10 63.0 6TPC100M 3000
105 6.3 105 150 7.3 4.3 1.9 D2 1900 40 0.10 94.5 6TPC150M 3000
85 5.0 105 330 7.3 4.3 1.9 D2 1900 40 0.10 207.9 6TPC330MA 3000
8.0 85 6.3 105 22 3.5 2.8 1.1 B1 1000 70 0.10 17.6 8TPC22M 3000
105 8.0 105 150 7.3 4.3 1.9 D2 1900 40 0.10 120.0 8TPC150M 3000
10 105 10.0 105 68 7.3 4.3 1.9 D2 1700 45 0.10 68.0 10TPC68M 3000
105 10.0 105 100 7.3 4.3 1.9 D2 1700 45 0.10 100.0 10TPC100M 3000
12.5 85 10.0 105 10 3.5 2.8 1.1 B1 800 80 0.10 12.5 12TPC10M 3000
85 10.0 105 15 3.5 2.8 1.1 B1 800 80 0.10 18.8 12TPC15M 3000
1 Ripple current (100 kHz/ +45 °C ), 2 ESR (100 kHz/+20 °C) 3 tan d (120 Hz/+20 °C) 4 After 5 minutes
Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Unit : mm
Marking
Externals of fi gure are the reference.
B1 Size
B1 Size D2 Size
Dimensions (not to scale)
Characteristics list
Specifi cations
Nov. 201501
Panasonic PoscAP ‘~~~
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
SW1
H
L
W
S
R. Voltage code Lot. No.
R.Cap. code
Polarity marking(+)
R. Voltage code Lot. No.
R.Cap. code
Polarity marking(+)
Surface Mount Type
Series : TH
Guaranteed at 125 °C, 1000h
RoHS compliance, Halogen free
Size code D2E D2 D3L D4
Category temperature range
–55 °C to +125 °C
Rated voltage range 2.5 V.DC to 6.3 V.DC 2.5 V.DC to 10 V.DC 4 V.DC to 6.3 V.DC 6.3 V.DC to 10 V.DC
Category voltage range 1.6 V.DC to 4.0 V.DC 1.6 V.DC to 6.3 V.DC 2.5 V.DC to 4.0 V.DC 4.0 V.DC to 6.3 V.DC
Rated capacitance range 150 µF to 330 µF 68 µF to 220 µF 220 µF to 330 µF 220 µF to 470 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d) Please see the attached characteristics list
Surge voltage (V.DC) Rated voltage × 1.15
Endurance
+125 °C 1000h, category voltage appled
Capacitance change
Within ±20 % of the initial value
tan d< 2 times of the initial limit
DC leakage current < 2 times of the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 500 h, No-applied voltage
Capacitance change
Within +40 %, −20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current < 3 times of the initial limit
Size code L±0.31W±0.2 H±0.12S±0.2 W1±0.1
D2E 7.3 4.3 1.8 1.3 2.4
D2 7.3 4.3 1.9 1.3 2.4
D3L 7.3 4.3 2.8 1.3 2.4
D4 7.3 4.3 3.8 1.3 2.4
R. Voltage (V.DC)
2.5 4.0 6.3 10
Code eg j A
Series
Rated
voltage
(V.DC)
Rated
temp.
(°C)
Category
voltage
(V.DC)
Category
temp.
(°C)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard
LWH
Ripple
1
current
(mAr.m.s.)
ESR 2
(mΩ max.)
tan d 3LC 4
(µA) Part number
Min.
Packaging Q'ty
(pcs)
THB
4.0 105 2.5 125 330 7.3 4.3 2.8 D3L 2000 40 0.10 132.0 4THB330ML 2500
6.3
105 4.0 125 220 7.3 4.3 2.8 2000 40 0.10 138.6 6THB220ML 2500
105 4.0 125 330 7.3 4.3 3.8
D4
3000 40 0.10 207.9 6THB330M 2000
105 4.0 125 470 7.3 4.3 3.8 3000 35 0.10 296.1 6THB470M 2000
10 105 6.3 125 220 7.3 4.3 3.8 3000 40 0.10 220.0 10THB220M 2000
105 6.3 125 330 7.3 4.3 3.8 3000 35 0.10 330.0 10THB330M 2000
THC
2.5 105 1.6 125 220 7.3 4.3 1.9
D2
1700 45 0.10 55.0 2R5THC220M 3000
6.3 105 4.0 125 150 7.3 4.3 1.9 1900 40 0.10 94.5 6THC150M 3000
10 105 6.3 125 68 7.3 4.3 1.9 1700 45 0.10 68.0 10THC68M 3000
THE
2.5
105 1.6 125
330
7.3 4.3 1.8
D2E
3100 15 0.10 82.5 2R5THE330MF 3000
105 1.6 125 7.3 4.3 1.8 2800 18 0.10 82.5 2R5THE330MI 3000
105 1.6 125 7.3 4.3 1.8 2400 25 0.10 82.5 2R5THE330M 3000
4.0
105 2.5 125
220
7.3 4.3 1.8 3100 15 0.10 88.0 4THE220MF 3000
105 2.5 125 7.3 4.3 1.8 2800 18 0.10 88.0 4THE220MI 3000
105 2.5 125 7.3 4.3 1.8 2400 25 0.10 88.0 4THE220M 3000
6.3 105 4.0 125 150 7.3 4.3 1.8 2800 18 0.10 94.5 6THE150MI 3000
105 4.0 125 7.3 4.3 1.8 2400 25 0.10 94.5 6THE150M 3000
1 Ripple current (100 kHz/ +45 °C ), 2 ESR (100 kHz/+20 °C) 3 tan d (120 Hz/+20 °C) 4 After 5 minutes
Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Unit : mm
Marking
Externals of fi gure are the reference. 1 ±0.2 : D2 2 ±0.2 :D3L, D4
D2E, D3L Size D2, D4 Size
Features
Specifi cations
Dimensions (not to scale)
Characteristics list
Nov. 201501
Panasonic rose» %6% m V fl | w E
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
R. Voltage code
Lot. No.
R.Cap. code
Polarity marking(+)
L
W
SW1
H
S
Surface Mount Type
Series : TC
Guaranteed at 125 °C
RoHS compliance, Halogen free
Features
Size code D2E D3L D4
Category temperature range
–55 °C to +125 °C
Rated voltage range 4 V.DC to 6.3 V.DC 2.5 V.DC to 10 V.DC
Category voltage range 3.2 V.DC to 5.0 V.DC 2.0 V.DC to 8.0 V.DC
Rated capacitance range 100 µF to 330 µF 150 µF to 680 µF 330 µF to 1000 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d)Please see the attached characteristics list
Surge voltage (V.DC) Rated voltage × 1.15
Endurance
+125 °C, 1000 h Category temperature range voltage applied
Capacitance change
Within ±20 % of the initial value
tan d< 2 times of the initial limit
DC leakage current < 2 times of the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 500 h, No-applied voltage
Capacitance change
Within +50 %, −20 % of the initial value (ETCF1000M6H (5H))
Within +40 %, −20 % of the initial value (Except for above model)
tan d< 1.5 times of the initial limit
DC leakage current < 3 times of the initial limit
Size code L±0.3 W±0.2 H±0.21S±0.2 W1±0.1
D2E 7.3 4.3 1.8 1.3 2.4
D3L 7.3 4.3 2.8 1.3 2.4
D4 7.3 4.3 3.8 1.3 2.4
R. Voltage (V.DC)
2.5 4.0 6.3 10.0
Code eg j A
Unit : mm
Externals of fi gure are the reference.
1 ±0.1 : D2E
Specifi cations
Marking Dimensions (not to scale)
Nov. 201501
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
Characteristics list
Series
Rated
voltage
(V.DC)
Rated
temp.
(°C)
Category
voltage
(V.DC)
Category
temp.
(°C)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard
LWH
Ripple
1
current
(mAr.m.s.)
ESR 2
(mΩ max.)
tan d 3LC 4
(µA) Part number
Min.
Packaging Q'ty
(pcs)
TCE
2.5
105 2.0 125 680 7.3 4.3 2.8 D3L 3500 12 0.10 170.0 ETCE680MCL 2500
105 2.0 125 7.3 4.3 2.8 3100 15 0.10 170.0 ETCE680MFL 2500
105 2.0 125 1000 7.3 4.3 3.8 D4 3900 15 0.15 250.0 ETCE1000MF 2000
4
105 3.2 125 150 7.3 4.3 1.8
D2E
2800 18 0.10 60.0 4TCE150MI 3000
105 3.2 125
220
7.3 4.3 1.8 3100 15 0.10 88.0 4TCE220MF 3000
105 3.2 125 7.3 4.3 1.8 2800 18 0.10 88.0 4TCE220MI 3000
105 3.2 125 7.3 4.3 1.8 2400 25 0.10 88.0 4TCE220M 3000
105 3.2 125 330 7.3 4.3 1.8 2800 18 0.10 132.0 4TCE330MI 3000
105 3.2 125 7.3 4.3 1.8 2400 25 0.10 132.0 4TCE330M 3000
105 3.2 125
470
7.3 4.3 2.8
D3L
3500 12 0.10 188.0 4TCE470MCL 2500
105 3.2 125 7.3 4.3 2.8 3100 15 0.10 188.0 4TCE470MFL 2500
105 3.2 125 7.3 4.3 2.8 2800 18 0.10 188.0 4TCE470MIL 2500
105 3.2 125 7.3 4.3 2.8 2400 25 0.10 188.0 4TCE470ML 2500
6.3
105 5.0 125 100 7.3 4.3 1.8
D2E
2800 18 0.10 63.0 6TCE100MI 3000
105 5.0 125 7.3 4.3 1.8 2400 25 0.10 63.0 6TCE100M 3000
105 5.0 125
150
7.3 4.3 1.8 3100 15 0.10 94.5 6TCE150MF 3000
105 5.0 125 7.3 4.3 1.8 2800 18 0.10 94.5 6TCE150MI 3000
105 5.0 125 7.3 4.3 1.8 2400 25 0.15 94.5 6TCE150M 3000
105 5.0 125 220 7.3 4.3 1.8 2800 18 0.15 138.6 6TCE220MI 3000
105 5.0 125 7.3 4.3 1.8 2400 25 0.15 138.6 6TCE220M 3000
105 5.0 125
330
7.3 4.3 2.8
D3L
3100 15 0.10 207.9 6TCE330MFL 2500
105 5.0 125 7.3 4.3 2.8 2800 18 0.10 207.9 6TCE330MIL 2500
105 5.0 125 7.3 4.3 2.8 2400 25 0.10 207.9 6TCE330ML 2500
105 5.0 125 470 7.3 4.3 3.8
D4
3500 18 0.15 296.1 6TCE470MI 2000
105 5.0 125 7.3 4.3 3.8 3000 25 0.15 296.1 6TCE470M 2000
105 5.0 125 680 7.3 4.3 3.8 3500 18 0.15 428.4 6TCE680MI 2000
105 5.0 125 7.3 4.3 3.8 3000 25 0.15 428.4 6TCE680M 2000
10
105 8.0 125 220 7.3 4.3 2.8 D3L 2800 18 0.10 220.0 10TCE220MIL 2500
105 8.0 125 7.3 4.3 2.8 2400 25 0.10 220.0 10TCE220ML 2500
105 8.0 125 330 7.3 4.3 3.8 D4 3000 25 0.10 330.0 10TCE330M 2000
TCF
2.5
105 2.0 125
680
7.3 4.3 2.8
D3L
4400 6 0.10 170.0 ETCF680M6L 2500
105 2.0 125 7.3 4.3 2.8 4400 7 0.10 170.0 ETCF680M7L 2500
105 2.0 125 7.3 4.3 2.8 4400 10 0.10 170.0 ETCF680ML 2500
105 2.0 125 7.3 4.3 3.8
D4
6100 5 0.10 170.0 ETCF680M5H 2000
105 2.0 125 1000 7.3 4.3 3.8 6100 5 0.10 250.0 ETCF1000M5H 2000
105 2.0 125 7.3 4.3 3.8 5600 6 0.10 250.0 ETCF1000M6H 2000
4
105 3.2 125 330 7.3 4.3 2.8 D3L 4000 12 0.10 132.0 4TCF330ML 2500
105 3.2 125 470 7.3 4.3 2.8 4400 10 0.10 188.0 4TCF470ML 2500
105 3.2 125 680 7.3 4.3 3.8 D4 4400 10 0.10 272.0 4TCF680MAH 2000
6.3
105 5.0 125
220
7.3 4.3 2.8
D3L
6100 5 0.10 138.6 6TCF220M5L 2500
105 5.0 125 7.3 4.3 2.8 4600 9 0.10 138.6 6TCF220M9L 2500
105 5.0 125 7.3 4.3 2.8 4000 12 0.10 138.6 6TCF220ML 2500
105 5.0 125 330 7.3 4.3 2.8 3900 9 0.10 207.9 6TCF330M9L 2500
105 5.0 125 470 7.3 4.3 3.8 D4 4400 10 0.10 296.1 6TCF470MAH 2000
10 105 10.0 125 150 7.3 4.3 2.8 D3L 3600 15 0.10 150.0 10TCF150ML 2500
1 Ripple current (100 kHz/ +45 °C ), 2 ESR (100 kHz/+20 °C) 3 tan d (120 Hz/+20 °C) 4 After 5 minutes
Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Nov. 201501
Panasonic The following table is a llst 01‘ our items whlch have been deleted from our catalogs. 11‘ you are uslng any of the following models on the deleted llst. please substltute them with the suggested alternatlve model as soon as possble. Our company contlnue to supply them to customers who have already used them, torthe tlme belng. ‘ ' u: :.' ‘. ,‘ ‘ 1 ‘ ' - ' --‘ SerleS cod: Mggiltsgro‘r ggferff" Alternative model S’PBLN 2009 1011mm D3L 2R5’PE080NL 20' 2 235’P:630MFL éTPBIOOMA 2009 6TPE‘lOOMAZB 2R5TPE580M1L 2011 2R51PE680MFL E- PB‘UONAV 2009 e P»100MA/1s AlPhéEOM 70‘1 6116mm BZ 61PBA7M 2009 6TPC47MB TPE 4TPE630MI 2012 61PE630M1 A’PB‘00N 2009 4’ 100MZB [)4 ATPEssoM: 20‘2 ATJFEBOMAF ZRETPBZZOMA 2009 ZRSTFEZZOMZB ZRSTPETUCOM 2011 2R5TPEl000MF 2R51PB100M 2012 4’ , 00MZB 2R5’PE1000M: 20’2 235’PE1000MF 101PB100ML 2010 101PC100M TPF D3» 61PF330M5EL 2014 , 6 PB‘bOlVL 2009 6 PClbolV 4TPF470M5Fl 2014 , TPB D3L 4TPB47OML 2009 4TPE470ML 31C 101F633M 2011 101PC33MB A'PBZZONL 2009 4' 2201/1 TPG 81:6 6TPGZZOMZG 201/1 , 2R5TPB330ML 2009 ZRSTPE330M l)‘ ?l All models 2013 01951 00M 2008 101PC100M TPL [2‘ 51 All node 5 20’ 3 D3 5TP5150M 2008 ETPCl 50M DZT All models 2013 L’PB2201V 2008 4’P:220M TPLF 02’ All mode 5 20' 3 ATPBéBOM 2009 6TPE680MI TPSF B13 ETPSF200M9ED 2014 , DA A PBL‘ION 2009 A P»A/0Ml 525 111115 62MA26 20'2 2R51PE1000M 2009 2R51PE1000MF TPH A14 UPH220MAZC 2013 2R51P9680M 2009 ZR5T3E680MF, 2R5'Pu22N51 70‘ 1 5190771151 10TPC33MB 2013 lZTPG33M $09 4TPU15MSI 201 l ETPUZZMSI m 6’PC33M 2012 6’PCA7MB ATPLlssMsl 20’1 613047161 ATPCA'7M 2012 6TPCA7MB 6TPU33MSK 2013 61PU47M51 TPC 2R51PC66W 2012 6 P368M 5‘1 41Pu47Ms< 20’3="" 613047161="" 4tpc220m="" 2009="" 41pe220m="" tpu="" zr‘stpuébmsk="" 2013="" 4tpu68msi="" dz="" l'pclsom="" 2009="" a'p:1="" 501/11="" l0lpl33vla="" 20‘1="" a="" p—l33vlaha="" 2r5tpc33om="" 2009="" 2r5tpe330m="" 6tpu47ma1="" 2011="" 61ph47mha="" 6’pe100nzb="" 201’="" (f="" 100mpb="" a09="" atpuesmai="" 20‘1="" 4t3h6811/1a="" atpei="" somub="" 2013="" atpet="" sumazb="" zrstpul="" oomai="" 201="" l="" etphloumha="" 2r51p:220m13="" 2012="" zrstjezzumfcb="" 1)?="" 4thc220lv="" 20’="" 3="" 41—19an="" 132="" zrstpezzomdgb="" 2013="" zrstpezzomfgb="" 101hb100ml="" 2010="" blp="">lbOM/B 201‘ 7115121290111” TH DSL 2R5 llB330lVL 20'0 2TPE330MIB 2011 21PE330MFB 04 4TH5680M 2013 2'PE330NAFGB 201‘ 2' 330MAF3 2STQC1OM 70‘1 7STQC1SNVFD 41951 50M 2011 ATPE1 501/11 5 20TQC15M 2011 25100 SMYFD TPE 2R5TPE47UM 201’ ZRST‘EAWUMZ léTQCZZM 20’ 1 2510C22Wr) 2TPE470M9 2011 2R5TPE47OM9 2510C15M 2012 25100 SMYFD 2 PL4‘/01v‘/ 201‘ 211511410111 ZSTQCZZM 20’2 iS'QOIMVFD DZE 2TPE470M6 2011 ZRSTPF470M6L ZOTQCZZM 2012 2510C22MVFD 2'PF330N9 201‘ 21251=F330M9 32 ZOTQCZZMVFD 2015 2510C22MVF) 2TPE330M7 2011 2R5TPE330M7 TQC 20TQC47MY 2012 20TQC4'7MYF 2’PE330N6 201’ 2’P1330M6 lGTQCElZM 20’ 2 leQC33NYl'D ZRSTPEZZOMC 2012 2R5TPE220M9 TGTQC47M 2012 léTQC4’7MYFD 2R51P:220M7 2012 211511330117 1610C68MY 20' 2 leQCbENYl’ 2510C33M 2012 25TQC33MYF D3. 201QCA'IM 20‘? 70lQCA/NW léTQCéBM 2012 leTQCbEMYF D3 léTQClOOM 20‘2 1610C100Mv:
Conductive Polymer Tantalum Solid Capacitors
Deletion models
Panasonic — The following table is a list of the EndeOfeLife (EOL) models. Sales of these items w1ll end as soon as we run out of its stock. We would like to express our appreciation for your business over the years with these products and we hope the new, alternative parts will continue to serve your needs. Thank you very much. Size Models for Year of Size Models for Year of Series code deletion deletion Alternative model Series code deletion deletion Alternative model C ’01PA33N 2012/9 10TPB33N B2 2R5’PE220MPB 2012/9 5TPAA7M 2012/9 10TPEA7M BTPE100MPC2 2012/9 TPA 'O/PA'OOM 2012/9 lOlPClDOlV élPJbUMPCZ 2012/9 611L1501v [>3 eTPA150M 2012/9 6TPC150M 6TPE150MIC2 2012/9 6TPE150MI A'PAZZON 2012/9 4T3E220N ATPEZZOMPCZ 2012/9 413E220M 8TPB33M 20l2/9 lOTPB33M C2 ATPEZZOMICZ ZOlZ/Q ATPEZZOMI BZ A’PB’SOMA 2012/9 4TjE150NAZB 4TPEZZOMFC2 2012/9 4TjEZZONF ATPBIOOMV 2012/9 4TPE100MZE 2R5TPE330MIC2 2012/9 ZRSTPESSOMF ‘0/PB??0MC 2009/10 , ?R5 10330000 2012/9 295 wsaomr 10TPB68MC 2012/9 101PC60M ZRSTPE33OMCCZ 2012/9 2R5TPE33OMC ‘UTPBMMC 2012/9 10TPC68V1 TPE 2R5’PE330M9C2 2012/9 295’ E330M9 STPBSZMC 2012/‘9 ETPElDOMAZB TDTPETSOMGC 2012/9 lOTPEZZOML C EFPB'SOMC 2012/9 éTjEiEON lOTPUSDMGC 2012/9 101F0220M. TPB eTPBiooMC 2012/9 éTPGiOOMG éTPEZZOMPC 2012/9 éTPEZZOM L'PBZZOMC 2012/9 A1=E220M 6TPEZZDMlC 2012/9 61>E220M ATPBISOMC 20l2/9 ETPElSOM 6TPEl50MPC ZOlZ/g ETPElSUM ZRSTPBZZDWC 2012/9 4T‘E220M C3 4TPEZZUMPC 2012/9 4T‘E220M 16TPBA7ML 2003/6 16TQC4’7MVFD ATPE220MIC 2012/9 41PE220MI D3L 2R51P9680w 201m 295 WSSOMH ?R3 Prssowc 2012/9 295 P»33OMF 2R5TPB47OML 2012/9 2R5TPE47OMI ZRSTPE33OMIC 2012/9 2R5TPE330MF [>3 ‘6TPB/17M 2003/0 10TQC47MY:D 2R5’PE330MFC 2012/9 295’ £330MF 2R57PBS30M 2012/‘9 2R5TPE33DM TPF DZE 2TPF4'7OM6 2012/9 2R5TPF470M6L S’PC3BM 2012/9 lZTPC33M TPG 31G 61P068M0 2012/9 612010001 éTPCiOOMC 2012/9 éTPGiOOMG ATPG150M 2012/9 éTPGiSOM m G'PC68M 2012,‘9 6T3G100MG TPL DZT 2R5'P1330M7 201‘/7 , TPC 4TPC100M 2012/9 61PG100MG 2R5TPL220MC 2012/9 , 2 PcseM 2012/9 , TPLF [121 ZTPLFSéOMé 20177 , 2R5TPC82M 2012/9 , 2TPLFA70M7 2012/9 , DZ ‘6lPC33Vl 2003/6 l6lQC33MY D TPSF BZS ZlPSlZ‘IONC ZOlZ/9 ZlJSlZ/OMQG 2R51PC220M 2012/9 2R5TPE220M ZTPSFZ7OM9 2012/9 21PSF270M96 ‘0TPD150M 2007/10 101PF‘50V1L éTPJim/l 2012/9 0130101051 6TPD4‘7DM 2012/‘3 6TPF47DMAH SOS ATF‘UTSM ZDlZ/Q ETPUZZMSI s’PD330M 2007/10 ijF330M9L 2R5’Puz2M 2012/9 0120220151 6TPD220M 2007/10 éTPFZZOML 6TPU22MSK 2012/9 éTPUZZMSl 2 PD680M 2012/‘3 AlJrEBDMAH TPU 511 AlPJ33VlSK 2017/9 Swot/11151 4TPD4'7DM 2007/10 4TPF470ML 2R5TPu47MsK 2012/9 2R5TPU47MSI [PD330M 2007/10 41>F330ML 8TPJ33MBI 2012/9 A’P—BNA—lA 2R5TPD1000M 2012,13 ETPF1000M6H BU? 61P047MBI 2012/9 6TPH4'7MHA 2R5lPDiUDOMS 2012/3 LlPl 1000M611 4iPdéBVlBl 2012/9 413168MHA TPD D4D ZRSTPD‘lOOOMé 2012/3 ETPF1000M6H DBL 2R5THB470ML 2012/9 001347014 2R5TPD1000M5 2012/3 ETPF1000M5H D4 2R5'AB‘000M 2012/9 , ZRSTPDEBOM 2007/l0 2R5TPF680ML TH 2R5THBGSOM ZOlZ/Q , ZRSTPDESOMS 2007/10 295721600117, 6THD330V1 2012/3 GTjF330M9L ZRETPDGSOME 2012/3 ZR‘STPFbBOMéL DAD ATHDA70M 2012/9 , ?RblPl)680M3 2012/3 HPFEBONbl- ?Rb —il)68OM 2012/3 295 Mme/vs 2R5TPD47OM 2007/10 2R5TPF470ML TR TR Series , 1A Series 2R51PD470M8 2007/10 ZRB'Pi/WONK APA 92A APA series 2006/4 2R5TPD470M6 2012/‘3 2R5TPF470M6L APB Di APB series 2006/4 , 2R5TPD47DM5 2012/3 [TPF47ON5/ APC D2 AFC saves 2009,’6 , APD m APD series 2009/6 ,
Conductive Polymer Tantalum Solid Capacitors
EOL models
CAUTION AN D WARNING . Device Soluiions Business Division Automoiive & lndusirial Systems Company Panasonic Corporation 1005 Kadoma, Kadoma City, Osaka 57178506, JAPAN
Please contact Factory
1. The electronic components contained in this catalog are designed and produced for use in home electric appliances, office eq uipment, information equipment,
communications equipment, and other general purpose electronic devices.
Before use of any of these components for equipment that requires a high degree of safety, such as medical instruments, aeros pace equipment, disaster-prevention
equipment, security equipment, vehicles (automobile, train, vessel),
please be sure to contact our sales representative.
2. When applying one of these components for equipment requiring a high degree of safety, no matter what sort of application it might be, be sure to install a protective
circuit or redundancy arrangement to enhance the safety of your equipment. In addition, please carry out the safety test on your own responsibility.
3. When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifications with us in advance.
4. Technical information contained in this catalog is intended to convey examples of typical performances and/or applications and is not intended to make any
warranty with respect to the intellectual property rights or any other related rights of our company or any third parties nor grant any license under such rights.
5. In order to export products in this catalog, the exporter may be subject to the export license requirement under the Foreign Exchange and Foreign Trade Law of
Japan.
6. No ozone-depleting substances (ODSs) under the Montreal Protocol are used in the manufacturing processes of Automotive & Ind ustrial Systems Company, Panasonic
Corporation.
CAUTION AND WARNING
The information in this catalog is valid as of December 2015.

Products related to this Datasheet

CAP TANT POLY 47UF 20V 2917
CAP TANT POLY 10UF 25V 1411
CAP TANT POLY 68UF 16V 2917
CAP TANT POLY 100UF 20V 2917
CAP TANT POLY 100UF 20V 2917
CAP TANT POLY 33UF 25V 2917
CAP TANT POLY 33UF 16V 2917
CAP TANT POLY 8.2UF 20V 1411
CAP TANT POLY 33UF 16V 2917
CAP TANT POLY 100UF 20V 2917
CAP TANT POLY 10UF 16V 1411
CAP TANT POLY 15UF 25V 2917
CAP TANT POLY 47UF 16V 2917
CAP TANT POLY 15UF 25V 2917
CAP TANT POLY 22UF 25V 2917
CAP TANT POLY 33UF 20V 2917
CAP TANT POLY 22UF 25V 2917
CAP TANT POLY 15UF 25V 2917
CAP TANT POLY 150UF 16V 2917
CAP TANT POLY 47UF 16V 2917
CAP TANT POLY 33UF 16V 1411
CAP TANT POLY 33UF 25V 2917
CAP TANT POLY 68UF 25V 2917
CAP TANT POLY 22UF 20V 2917
CAP TANT POLY 6.8UF 35V 1411
CAP TANT POLY 10UF 16V 1411
CAP TANT POLY 33UF 16V 1411
CAP TANT POLY 22UF 20V 1411
CAP TANT POLY 33UF 16V 1411
CAP TANT POLY 100UF 16V 2917
> /html> iption">CAP TANT POLY 10UF 16V 1411
16TQC10M
CAP TANT POLY 150UF 16V 2917
16TQC150MYF
CAP TANT POLY 15UF 16V 1411
16TQC15M
CAP TANT POLY 33UF 16V 2917
16TQC33MYFD
CAP TANT POLY 47UF 16V 2917
16TQC47MW
CAP TANT POLY 47UF 16V 2917
16TQC47MYFD
CAP TANT POLY 100UF 20V 2917
20TQC100MYF
CAP TANT POLY 8.2UF 20V 1411
20TQC8R2M
CAP TANT POLY 15UF 25V 2917
25TQC15MV
CAP TANT POLY 22UF 25V 2917
25TQC22MV
CAP TANT POLY 5.6UF 25V 1411
25TQC5R6M
CAP TANT POLY 10UF 35V 2917
35TQC10M
CAP TANT POLY 10UF 16V 1411
16TQC10M
CAP TANT POLY 150UF 16V 2917
16TQC150MYF
CAP TANT POLY 15UF 16V 1411
16TQC15M
CAP TANT POLY 33UF 16V 2917
16TQC33MYFD
CAP TANT POLY 47UF 16V 2917
16TQC47MW
CAP TANT POLY 47UF 16V 2917
16TQC47MYFD
CAP TANT POLY 100UF 20V 2917
20TQC100MYF
CAP TANT POLY 8.2UF 20V 1411
20TQC8R2M
CAP TANT POLY 15UF 25V 2917
25TQC15MV
CAP TANT POLY 22UF 25V 2917
25TQC22MV
CAP TANT POLY 5.6UF 25V 1411
25TQC5R6M
CAP TANT POLY 10UF 35V 2917
35TQC10M
CAP TANT POLY 22UF 25V 2917
25TQC22MYFD
CAP TANT POLY 3.9UF 35V 1411
35TQC3R9MYF
CAP TANT POLY 47UF 16V 2917
16TQC47MYFT
CAP TANT POLY 22UF 20V 2917
20TQC22MYFD
CAP TANT POLY 33UF 20V 2917
20TQC33MYFD
CAP TANT POLY 22UF 25V 2917
25TQC22MYFT
CAP TANT POLY 33UF 16V 2917
16TQC33MYFS
CAP TANT POLY 22UF 20V 1411
20TQC22MYFB
CAP TANT POLY 47UF 20V 2917
20TQC47MYFT
CAP TANT POLY 10UF 35V 2917
35TQC10MYF
CAP TANT POLY 15UF 35V 2917
35TQC15MYF
CAP TANT POLY 10UF 35V 2917
35TQC10MYF
CAP TANT POLY 15UF 35V 2917
35TQC15MYF
CAP TANT POLY 10UF 35V 2917
35TQC10MYF
CAP TANT POLY 15UF 35V 2917
35TQC15MYF
CAP TANT POLY 2.7UF 16V 1411
35TQC2R7MYF
CAP TANT POLY 150UF 16V 2917
1CTQC15173F1
CAP TANT POLY 150UF 16V 2917
1CTQC15173F1
CAP TANT POLY 150UF 16V 2917
1CTQC15173F1
CAP TANT POLY 100UF 20V 2917
20TQC100MD2
CAP TANT POLY 33UF 16V 1411
16TQC33MYFB
CAP TANT POLY 33UF 16V 1411
16TQS33MBD
CAP TANT POLY 10UF 25V 1411
25TQS10MED
CAP TANT POLY 6.8UF 35V 1411
35TQS6R8MHD
CAP TANT POLY 100UF 20V 2917
20TQC100MD2
CAP TANT POLY 33UF 16V 1411
16TQC33MYFB
CAP TANT POLY 33UF 16V 1411
16TQS33MBD
CAP TANT POLY 10UF 25V 1411
25TQS10MED
CAP TANT POLY 6.8UF 35V 1411
35TQS6R8MHD
CAP TANT POLY 100UF 20V 2917
20TQC100MD2
CAP TANT POLY 33UF 16V 1411
16TQC33MYFB
CAP TANT POLY 33UF 16V 1411
16TQS33MBD
CAP TANT POLY 10UF 25V 1411
25TQS10MED
CAP TANT POLY 6.8UF 35V 1411
35TQS6R8MHD
CAP TANT POLY 68UF 25V 2917
25TQC68MYF
CAP TANT POLY 68UF 25V 2917
25TQC68MYF
CAP TANT POLY 68UF 25V 2917
25TQC68MYF
CAP TANT POLY 33UF 16V 2917
16TQC33MYFS
CAP TANT POLY 22UF 25V 2917
25TQC22MYFD
CAP TANT POLY 47UF 16V 2917
16TQC47MYFT
CAP TANT POLY 47UF 20V 2917
20TQC47MYFT
CAP TANT POLY 22UF 25V 2917
25TQC22MYFT
CAP TANT POLY 3.9UF 35V 1411
35TQC3R9MYF
CAP TANT POLY 22UF 20V 1411
20TQC22MYFB
CAP TANT POLY 22UF 20V 2917
20TQC22MYFD
CAP TANT POLY 33UF 20V 2917
20TQC33MYFD
CAP TANT POLY 33UF 16V 2917
16TQC33MYFS
CAP TANT POLY 22UF 25V 2917
25TQC22MYFD
CAP TANT POLY 47UF 16V 2917
16TQC47MYFT
CAP TANT POLY 47UF 20V 2917
20TQC47MYFT
CAP TANT POLY 22UF 25V 2917
25TQC22MYFT
CAP TANT POLY 3.9UF 35V 1411
35TQC3R9MYF
CAP TANT POLY 22UF 20V 1411
20TQC22MYFB
CAP TANT POLY 22UF 20V 2917
20TQC22MYFD
CAP TANT POLY 33UF 20V 2917
20TQC33MYFD
> /html> lass="init-footer-here"> > /html>