SVPD Series Datasheet by Panasonic Electronic Components

View All Related Products | Download PDF Datasheet
Panasonic OS-CON {J v a (2% (9:; 1%
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Aluminum Solid Capacitors
+
fD
L
P
R
C
W
H
0.2 max.
Lot. No.
Polarity marking (−)
Series
R. Capacitance
R. Voltage
Surface Mount Type
Series : SVPD
125 °C 2000 h
Guaranteed at 85 °C 85 %
RoHS compliance, Halogen free
Features
Unit : mm
Size
code
fD±0.5 L +0.1 W±0.2 H±0.2 C±0.2 R P±0.2
C6 6.3 5.9 6.6 6.6 7.3
0.6 to 0.8
2.1
E7 8.0 6.9 8.3 8.3 9.0
0.6 to 0.8
3.2
F8 10.0 7.9 10.3 10.3 11.0
0.6 to 0.8
4.6
E12 8.0 11.9 8.3 8.3 9.0
0.8 to 1.1
3.2
F12 10.0 12.6 10.3 10.3 11.0
0.8 to 1.1
4.6
−0.4
Series
Rated
voltage
(V.DC)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard (Reel size : f380)
fDL
Ripple 1
current
(mAr.m.s.)
Allowable
1
ripple current
(mAr.m.s.)
ESR 2
(mΩ max.)
tan d 3LC 4
(µA) Part number
Min.
Packaging Q'ty
(pcs)
SVPD
10 56 6.3 5.9 C6 538 1700 45 0.12 112 10SVPD56M 1000
16 82 8.0 6.9 E7 670 2120 40 0.12 262 16SVPD82M 1000
25
10 6.3 5.9 C6 474 1500 65 0.10 50 25SVPD10M 1000
22 8.0 6.9 E7 580 1835 48 0.10 110 25SVPD22M 1000
39 10.0 7.9 F8 664 2100 45 0.10 195 25SVPD39M 500
47 8.0 11.9 E12 943 2980 30 0.12 235 25SVPD47M 400
82 10.0 12.6 F12 1202 3800 28 0.12 410 25SVPD82M 400
35
8.2 8.0 6.9 E7 400 1300 70 0.10 57 35SVPD8R2M 1000
18 10.0 7.9 F8 550 1800 60 0.10 126 35SVPD18M 500
22 8.0 11.9 E12 700 2300 50 0.12 154 35SVPD22M 400
47 10.0 12.6 F12 1150 3650 30 0.12 329 35SVPD47M 400
1 Ripple current (100 kHz/ +105 °C < Tx < 125 °C), Allowable ripple current (100 kHz / Tx < 105 °C)
2 ESR (100 kHz to 300 kHz/+20 °C) 3 tan d (120 Hz/+20 °C) 4 After 2 minutes
Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Frequency 120 Hz < f < 1 kHz 1 kHz < f < 10 kHz 10 kHz < f < 100 kHz 100 kHz < f < 500 kHz
Coeffi cient 0.05 0.3 0.7 1
Size code C6 E7 F8 E12 F12
Category temperature range
–55 °C to +125 °C
Rated voltage range
10 V.DC to 25 V.DC 16 V.DC to 35 V.DC
25 V.DC to 35 V.DC
Rated capacitance range 10 µF to 56 µF 8.2 µF to 82 µF 18 µF to 39 µF 22 µF to 47 µF 47 µF to 82 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d) Please see the attached characteristics list
Endurance
+125 °C, 2000 h, rated voltage applied
Capacitance change
Within ±20 % of the initial value
tan d< 200 % of the initial limit
DC leakage current Within the initial limit
Damp heat
(Steady State)
+85 °C, 85 % to 90 %, 1000 h, rated voltage applied
Capacitance change
Within ±20 % of the initial value
tan d< 200 % of the initial limit
DC leakage current Within the initial limit (after voltage processing)
Specifi cations
Marking Dimensions (not to scale)
Frequency correction factor for ripple current
Externals of fi gure are the reference.
Characteristics list
Nov. 201501
Panasonic Guidelines and precautions regarding the technical information and use of our products described in this online catalog. I If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. I The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. I If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. I The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. I The technical information in this online catalog provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. I If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. l The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. I When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. Dlrnprrlg
If you want to use our products described in this online catalog for applications requiring
special qualities or reliability, or for applications where the failure or malfunction of the
products may directly jeopardize human life or potentially cause personal injury
(e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion
equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety
equipment), it is necessary to verify whether the specifications of our products fit to such
applications. Please ensure that you will ask and check with our inquiry desk as to whether
the specifications of our products fit to such applications use before you use our products.
The quality and performance of our products as described in this online catalog only apply
to our products when used in isolation. Therefore, please ensure you evaluate and verify
our products under the specific circumstances in which our products are assembled in your
own products and in which our products will actually be used.
If you use our products in equipment that requires a high degree of reliability, regardless
of the application, it is recommended that you set up protection circuits and redundancy
circuits in order to ensure safety of your equipment.
The products and product specifications described in this online catalog are subject to
change for improvement without prior notice. Therefore, please be sure to request and
confirm the latest product specifications which explain the specifications of our products in
detail, before you finalize the design of your applications, purchase, or use our products.
The technical information in this online catalog provides examples of our products'
typical operations and application circuits. We do not guarantee the non-infringement of
third party's intellectual property rights and we do not grant any license, right, or interest
in our intellectual property.
If any of our products, product specifications and/or technical information in this online
catalog is to be exported or provided to non-residents, the laws and regulations of the
exporting country, especially with regard to security and export control, shall be observed.
The switchover date for compliance with the RoHS Directive/REACH Regulations varies
depending on the part number or series of our products.
When you use the inventory of our products for which it is unclear whether those products
are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the
website inquiry form and contact us.
We do not take any responsibility for the use of our products outside the scope of the
Guidelines and precautions regarding the
described in this online catalog.
<Regarding the Certificate of Compliance with
01-Apr-19
technical information and use of our products
the EU RoHS Directive/REACH Regulations>

Products related to this Datasheet

CAP ALUM POLY 82UF 20% 25V SMD
CAP ALUM POLY 47UF 20% 25V SMD
CAP ALUM POLY 39UF 20% 25V SMD
CAP ALUM POLY 22UF 20% 25V SMD
CAP ALUM POLY 10UF 20% 25V SMD
CAP ALUM POLY 18UF 20% 35V SMD
CAP ALUM POLY 22UF 20% 35V SMD
CAP ALUM POLY 47UF 20% 35V SMD
CAP ALUM POLY 82UF 20% 25V SMD
CAP ALUM POLY 47UF 20% 25V SMD
CAP ALUM POLY 39UF 20% 25V SMD
CAP ALUM POLY 10UF 20% 25V SMD
CAP ALUM POLY 18UF 20% 35V SMD
CAP ALUM POLY 22UF 20% 35V SMD
CAP ALUM POLY 47UF 20% 35V SMD
CAP ALUM POLY 82UF 20% 25V SMD
CAP ALUM POLY 47UF 20% 25V SMD
CAP ALUM POLY 39UF 20% 25V SMD
CAP ALUM POLY 22UF 20% 25V SMD
CAP ALUM POLY 10UF 20% 25V SMD
CAP ALUM POLY 18UF 20% 35V SMD
CAP ALUM POLY 22UF 20% 35V SMD
CAP ALUM POLY 47UF 20% 35V SMD
CAP ALUM POLY 22UF 20% 25V SMD
CAP ALUM POLY 56UF 20% 10V SMD
CAP ALUM POLY 82UF 20% 16V SMD
CAP ALUM POLY 8.2UF 20% 35V SMD
CAP ALUM POLY 56UF 20% 10V SMD
CAP ALUM POLY 82UF 20% 16V SMD
CAP ALUM POLY 8.2UF 20% 35V SMD
CAP ALUM POLY 56UF 20% 10V SMD
CAP ALUM POLY 82UF 20% 16V SMD
CAP ALUM POLY 8.2UF 20% 35V SMD