IDSx Series Drawing Datasheet by Samtec Inc.

View All Related Products | Download PDF Datasheet
© I/s[3Ia]4-‘ BROWN WIRE INDICATES PIN #l mob 25] MAX (WP);-e I—I' H BS OF GRAV CABLE O TO CAP SIDE FIG I DEXX.XX7XXX7XXX SHOWN (SEE NOTE 9) IDSDOSV TABLE 1 POSITION Z. 3‘ 4 360+ 005/7 000 [9 14+U.13I70 00] 5 THRU 36 1165+ 010/7 005 [9 27+0.25I70 13] © 093D 36] SXEXXEXEXXXXEXXXEXXX ROW SPECIFICATION 75 SINGLE ROW FD DOUBLE ROW W THRU 5 PER ROWI USE CAELE’ CBFXXFZBJ/EAFOSUVC IDSD) USE CABLE CEFXXFZBJ/SAFI 007C IDSS) IDSD FULL STRIFD 550: 005m 7T :0 T3] REF CUTSTRIF’ ‘A“ m ‘xx‘x Tenn 54]]~059[I so] IDSS FuLL STRIP MO: 00sz 671013] REF CuT STRIF’ ‘A‘ m UT ‘xx‘x won 5411~ 0on 48] "NOTE STANDARD COLORFCODED CABLE N/A FOR DOUBLE ROW 3T THRu 3B POSITION , SEE VG OPTION END ASSEMBLV SPECIFICATION [SINGLE] ONE IDC ASSEMBLV FD (DOUBLEI TWO IDC ASSEMBLVS W ALL OPTIONS THAT USE D‘xx‘ B xx‘ S‘xx“ A 00 [Im 61 MINIMUM ALL OTHER OPTIONS T 00 [25 A] MINIMUM MEASURED IN INCHES ISCrSérD T J ISBraérD kcrlorfo OR TI SECTION ‘ W FDXX’DAISY CHAINr OUBLE (SEEF (NOT AVAILABLE WITH FIDSS] Fxx POLARIZED MATING (SEE FIG FST‘X“ STRIRRED B TINNED (SEE FIG 7R REVERSED CONECTOR [SEE FIG (NOT AVAILABLE WITH 7M B 70) 7M MIDDLE REVERSED (SEE FIG 7, 5 (NOT AVAILABLE WITH 7R & FO) (REQUIRES rsxx, rwxx OR Dxx) 7O» OUTSIDE REVERSED [SEE FIG B, (NOT AVAILABLE WITH 7R & 7M) (REQUIRES rsxx, rwxx OR Dxx) FEW REVERSED wIRING [SEE FIG 7, erx BREAKOUT [SEE FIG B, STH z} erx DAISV CHAIN SINGLE [SEE FIG er>< wiring="" reversed="" (see="" fig="" t="" w="" t="" tin="" both="" ends="" (use="" cfidft)="" vg="" grav="" cable="" (see="" fig="" ii="" substitute="" grav="" cable="" for="" stan="" color="" coded="" cable="" use="" idsd="" cbvxxfzej/mfosofg="" idss’="" cbrxxrzbj/séerrg="" (note="" use="" grav="" cable="" for="" dou="" row="" fbi="" thru="" 736="" position)="" r7)“="" xx="" :="" i333="" i814.‘="" brown="" wire="" indicat="" fig="" 2="" idssvosvsvxxxxvxxxvxxx="" shown="" [different="" as="" shown.="" otherwise="" same="" as="" fig="" i)="" contact="" is="" alwavs="" assemb="" inside="" of="" single="" row="" con="" crior=""><(g or="" ti="" section="" b="" section="" "c"="" c"="" @1223="">
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
DO NOT
SCALE FROM
THIS PRINT
IDSX-XX-X-XX.XX-XXX-XXX
ROW SPECIFICATION
-S: SINGLE ROW
-D: DOUBLE ROW
LENGTH OF CABLE
ALL OPTIONS THAT USE -D"XX",-B"XX",-S"XX":
4.00 [101.6] MINIMUM
ALL OTHER OPTIONS: 1.00 [25.4] MINIMUM
MEASURED IN INCHES
NO. OF CONDUCTORS
(
-02 THRU -36 PER ROW
)
USE CABLE: CB-XX-28-7/36-050-C (IDSD)
USE CABLE: CB-XX-28-7/36-100-C (IDSS)
IDSD FULL STRIP: "A"=3.650
.005[92.71
0.13] REF
CUT STRIP: "A" = ("XX" x .100[2.54])+.059[1.50]
IDSS FULL STRIP: "A"=3.610
.005[91.69
0.13] REF
CUT STRIP: "A" = ("XX" x .100[2.54])+.019[0.48]
*NOTE: STANDARD COLOR-CODED CABLE N/A
FOR DOUBLE ROW 31 THRU 36 POSITION -
SEE -G OPTION.
END ASSEMBLY SPECIFICATION
-S: (SINGLE) ONE IDC ASSEMBLY
-D: (DOUBLE) TWO IDC ASSEMBLYS
OPTION SPECIFICATION
-DXX: DAISY CHAIN -DOUBLE (SEE FIG 2, STH 2)
(NOT AVAILABLE WITH -IDSS)
-PXX: POLARIZED MATING (SEE FIG 3, STH 2)
-ST"X": STRIPPED & TINNED (SEE FIG 4, STH 2)
-R: REVERSED CONECTOR (SEE FIG 5, STH 2)
(NOT AVAILABLE WITH -M & -O)
-M: MIDDLE REVERSED (SEE FIG 7, STH 3)
(NOT AVAILABLE WITH -R & -O)
(REQUIRES -SXX, -WXX OR -DXX)
-O: OUTSIDE REVERSED (SEE FIG 8, STH 3)
(NOT AVAILABLE WITH -R & -M)
(REQUIRES -SXX, -WXX OR -DXX)
-RW: REVERSED WIRING (SEE FIG 9, STH 3)
-BXX: BREAKOUT (SEE FIG 6, STH 2)
-SXX: DAISY CHAIN -SINGLE (SEE FIG 10, STH 3)
-WXX: WIRING REVERSED (SEE FIG 11, STH 3)
-T: TIN BOTH ENDS
(USE C-10-T)
-G: GRAY CABLE (SEE FIG 1)
SUBSTITUTE GRAY CABLE FOR STANDARD
COLOR CODED CABLE. USE:
IDSD: CB-XX-28-7/36-050-G
IDSS: CB-XX-28-7/36-100-G
(NOTE: USE GRAY CABLE FOR DOUBLE
ROW -31 THRU -36 POSITION)
+.015 [0.38]
-.005 [0.13]
OPTION SPECIFICATION
+.015 [0.38]
-.005 [0.13]
XX.XX
1/8
3.18
"A"
"A"
"A"
C
BROWN WIRE INDICATES PIN #1
"D"
.010 0.25
MAX (TYP)
C
XX.XX
1/8
3.18
"A"
"B"
"B" "C"
"C"
C
BROWN WIRE INDICATES PIN #1
FIG 2
IDSS-05-S-XX.XX-XXX-XXX SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
.093 2.36
SECTION "A"-"A"
ISC-36-D
C-10-X(G OR T)
ISB-36-D
.093 2.36
SECTION "B"-"B"
ISC-36-S
ISB-36-S
C-10-X(G OR T)
SECTION "C"-"C"
RIBS OF GRAY CABLE
GO TO CAP SIDE
FIG 1
IDSD-05-D-XX.XX-XXX-XXX SHOWN
(SEE NOTE 9)
C
CONTACT IS ALWAYS ASSEMBLIED TO
INSIDE OF SINGLE ROW CONNECTORS
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [0.3] 2
.XXX:
.005 [0.13]
.XXXX:
.0020 [0.051]
MATERIAL:
ASSEMBLY INSULATION DISPLACEMENT SOCKET CONNECTOR
BY:
IDSX-XX-X-XX.XX-XXX-XXX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
DEAN P
11/02/1988
3
1
SHEET SCALE: 2:1
INSULATOR: PBT UL94V-0, COLOR: BLACK
CONTACT: BeCu
F:\DWG\MISC\MKTG\IDSX-XX-X-XX.XX-XXX-XXX-MKT.SLDDRW
WIRE: 28 AWG, 7/28, TINNED, STRANDED WITH
COLOR-CODED OR GRAY PVC INSULATOR
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. OPTION -SXX WHEN MATING DOUBLE ROW CONNECTOR WITH 2 SINGLE
ROW CONNECTORS, THE OUTER MOST SINGLE WILL BE CONNECTED TO
CONDUCTOR #1 AND THE INSIDE SINGLE TO CONDUCTOR #2.
3. USING A #32 MICRO FINISHED .025
.0005 [.64
.013] SQ POST,
INSERTION / WITHDRAWAL FORCES TO BE:
INSERTION: 4.0 OZ [114 GRAMS] AVG / 6.0 OZ [170 GRAMS] MAX
WITHDRAWAL: 2.75 OZ [78.0 GRAMS] AVG / 2.0 OZ [57 GRAMS] MIN.
4. MAX ALLOWABLE BOW AFTER ASSEMBLY TO BE .006 INCH/INCH [MM/MM].
5. A CHAMFER ON THE END OF THE CAP IS GUARANTEED ON FINAL ASSEMBLIES
THAT ARE AT LEAST 18 POSITIONS FOR MALE AND FEMALE TERMINATION.
6. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED FOR SHORTS AND OPENS.
7. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 1000V.
8. WIRE: 28 AWG, 7/36, TINNED, STRANDED WITH PVC INSULATOR
9. FOR IDSX WITH R OR RW OPTION, CABLE RIB ORIENTATION CAN
BE EITHER TOWARDS OR AWAY FROM THE CAP.
10. WHEN CUTTING CABLE TO LENGTH, CONDUCTORS SHOULD NOT EXTEND
PAST THE CABLE INSULATION, EXTENDING LESS THAN 25% OF CABLE
THICKNESS ON CONSECUTIVE AND LESS THAN 50% OF CABLE THICKNESS
ON NON-CONSECUTIVE STRANDS IS CONSIDERED A PROCESS INDICATOR.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION AA
SD BROWN WIRE ‘ \ BROWN WIRE J Lima/Mam] N WIRE (2[5I] MIN) 3 FIG 2 2 4 FIG 3 VDXX SHOWN , VPXX: POLARIZED MATING SHOWN {NOT AVAILABLE WITH DSS] XX 7 PCS ON NO ENT AS SHOWN, OTHERWISE SAME AS FIG I) I ' I I (INSERT POLARIZING KEY PART NO. EROS INTo SPECIFIED POSITION rxX) LENGTH (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG I) NOTE Ts oNLv I POLARIZED POSITION WILL HAVE SAME ELECTRICAL POSITION FROM BROWN WIRE [wig] TABLE 2 .L.. sTa 1/8 [3 Ta] ST4 1/4 [a 35] 5T3 3/3 [9 53] is 8T2 1/2 [12 7o] IDSS SINGLE IDSD BOLIBLE m SEE NOTE 2 Q) 030[o 75] MAX [AFTER STRIRRED .5 TINNEDI i m I‘i‘L“ 1 l/Ié[¥ 59] I/Té[159]MAX FLAT WIRE ALLOWED BROWN WIRE FIG 6 VBXX: BREAKOUT SHOWN {DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG I) IDSDVXXVDVXXVBXX xx INDICATES NO OF COND IDSDVXXVSVXXVBXX xx INDICATES NO OF COND IDSSVXXVDVXXVBXX xx INDICATES NO OF POSITI F1674 IDSererrxxerx rST”X SHOWN TAS SHOWN, OTHERWISE SAME AS FIG I) Xm NO OF POS'" Eta: I m
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
FIRST PRESS END
"L"
1/16
1.59
.030 0.76
MAX
(AFTER STRIPPED & TINNED)
1/16
1.59
MAX
FLAT WIRE ALLOWED
FIG 4
-ST"X" SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
NOTES:
1. CONDUCTORS SHALL BE CONSISTENT IN APPEARANCE.
SOLDER MUST MAINTAIN CABLE STRAINS WITHIN THE
MAX DIA. TOLERANCE.
2. USE LEAD FREE SOLDER ONLY.
3. NOT AVAILABLE IN 28 POSITION AND UP IN DOUBLE ROW ONLY.
SEE NOTE 2
BROWN WIRE
36
1
IDSS
XX
3
+
-
2
176
+
-
51
25
IDSD-XX-D-XX-BXX
XX INDICATES NO. OF CONDUCTORS
IDSD-XX-S-XX-BXX
XX INDICATES NO. OF CONDUCTORS
IDSS-XX-D-XX-BXX:
XX INDICATES NO. OF POSITIONS
IDSS-XX-S-XX-BXX:
XX INDICATES NO. OF POSITIONS
BROWN WIRE
FIG 6
-BXX: BREAKOUT SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
IDSS: SINGLE
IDSD: DOUBLE
BROWN WIRE
1 3
2
4
71
72
FIG 3
-PXX: POLARIZED MATING SHOWN
(XX = POSION NO.)
(INSERT POLARIZING KEY PART NO.
PK-06 INTO SPECIFIED POSITION -XX)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
NOTE:
1. POLARIZED POSITION WILL HAVE SAME ELECTRICAL
POSITION FROM BROWN WIRE.
72
71
4
2
3
1
IDSD
FIG 5
-R: REVERSED CONNECTOR SHOWN
(NOT AVAILABLE WITH -M & -O)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
IDSD
BOTH SOCKETS REV.
WHEN DAISY CHAINED
XX
1/8
3.18
(2[51] MIN)
FIG 2
-DXX SHOWN
(NOT AVAILABLE WITH -DSS)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
IDSD: DOUBLE
BROWN WIRE
NOTES:
1. 2" MINIMUM LENGTH
2. 1" INCREMENTS ONLY
IDSS
SHEET OF
ASSEMBLY INSULATION DISPLACEMENT SOCKET CONNECTOR
BY:
IDSX-XX-X-XX.XX-XXX-XXX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
DEAN P
11/02/1988
3
2
SHEET SCALE: 2:1
REVISION AA
F:\DWG\MISC\MKTG\IDSX-XX-X-XX.XX-XXX-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
) ) ) ) W ) H U_I_€( 1 3 (3 STANDARD WIRING FIG 7 FIG 8 E REVERSED SHOWN HO: OUTSIDE REVERSED SHOWN ABLE wIIH 7!? a; ,0, (NOT AVAILABLE wIIH 7!? & 7M] xx, rwxx OR VDXX) IREOUIRES rsxx. rwxx OR erxI HRSI POSITION OTHERWISE SAME AS FIG 11 [DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG I) m FIG 9 rRW REVERSED WIRING SHOWN [DIFFERENT AS SHOWN, OTHERWISE SAME AS IDSD DOUBLE SINGLE IDss SINGLE OUTERl MOST BROWN WIRE xx : I/5[3 Ia] (2[51] MIN} xx : I/a[3 Ia] <— irsi="" press="" end="" (2[5i]="" min)="" m="" vwxx:="" w="" hfirst="" press="" end="" {different="" as="" sh="" fig="" 10="" w="" eta:="">
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
FIRST PRESS END
FIRST PRESS END
FIG 7
-M: MIDDLE REVERSED SHOWN
(NOT AVAILABLE WITH -R & -O)
(REQUIRES -SXX, -WXX OR -DXX)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
FIG 8
-O: OUTSIDE REVERSED SHOWN
(NOT AVAILABLE WITH -R & -M)
(REQUIRES -SXX, -WXX OR -DXX)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
BROWN WIRE INDICATES PIN #1
STANDARD WIRING
BROWN WIRE
(BROWN WIRE TO
OPPOSITE SIDE OF
FIRST POSITION)
FIRST POSITION
FIG 9
-RW: REVERSED WIRING SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
REVERSED WIRING
XX
1/8
3.18
(2[51] MIN)
BROWN WIRE
SINGLE
OUTER MOST
IDSD: DOUBLE
IDSS: SINGLE
FIG 10
SXX: DAISY CHAIN - SINGLE SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
XX
1/8
3.18
(2[51] MIN)
BROWN WIRE
SINGLE
OUTER MOST
FIG 11
-WXX: WIRING REVERSED SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
IDSD: DOUBLE
IDSS: SINGLE
NOTE:
1. OPTION -SXX WHEN MATING DOUBLE ROW CONNECTOR WITH 2 SINGLE ROW CONNECTORS,
THE OUTER MOST SINGLE WILL BE CONNECTED TO CONDUCTOR #1 AND THE INSIDE SINGLE
TO CONDUCTOR #2.
NOTE:
1. OPTION -SXX WHEN MATING DOUBLE ROW CONNECTOR WITH 2 SINGLE ROW CONNECTORS,
THE OUTER MOST SINGLE WILL BE CONNECTED TO CONDUCTOR #1 AND THE INSIDE SINGLE
TO CONDUCTOR #2.
SHEET OF
ASSEMBLY INSULATION DISPLACEMENT SOCKET CONNECTOR
BY:
IDSX-XX-X-XX.XX-XXX-XXX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
DEAN P
11/02/1988
3
3
SHEET SCALE: 2:1
REVISION AA
F:\DWG\MISC\MKTG\IDSX-XX-X-XX.XX-XXX-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322

Products related to this Datasheet

CABLE ASSY 8 POS SKT-SKT 5.00"
IDC CABLE F-F 6POS 6 LONG
CABLE ASSEM 8POS
CABLE ASSEM .1" 16POS F-F 5"
INSULATION DISPLACEMENT TERMINAL
CABLE ASSEM 20POS
CABLE ASSEM 5POS
CABLE RIBBON SOCKET SGNL 3 PIN
CBL ASSY FLAT 10 POS IDC 20"
INSULATION DISPLACEMENT SOCKET C
INSULATION DISPLACEMENT SOCKET C
CONN SOCKET IDC DUAL
CABLE ASSEMBLY SOCKET 17 POSITIO
FLEX CABLE 20 POS 12"
FLEX CABLE 26 POS 7"
FLEX CABLE 26 POS 5"
CBL ASSY FLAT 10 POS IDC .05M
CABLE ASSEM .1" 16POS F-F 9"
CABLE ASSEM 8POS
CABLE ASSEM 10POS
CABLE ASSEM 10POS
CABLE ASSEM 20POS
CABLE ASSEM 24POS
CABLE ASSEM 26POS
CABLE ASSEM 34POS
CABLE ASSEM 14POS
INSULATION DISPLACEMENT TERMINAL
INSULATION DISPLACEMENT TERMINAL
INSULATION DISPLACEMENT TERMINAL
INSULATION DISPLACEMENT TERMINAL