EIRP410-2SFP-T Manual Datasheet by B&B SmartWorx, Inc.

View All Related Products | Download PDF Datasheet
m A g _.\_ E 1—4 a a J l J
Manual
Elinx EIRP410-2SFP-T
8 Ports10/100 PoE with 2 combo 10/100/1000 or 100/1000 SFP Ports
Unmanaged Din Rail Ethernet Switch
(37 3&5 ELECTRONICS EuroEan Headguaners
EIRP410-2SFP-T
Documentation Number: EIRP410-2SFP-T-0912m
International Headquarters:
707 Dayton Road
Ottawa, IL 61350 USA
Phone (815) 433-5100
Website: www.bb-elec.com
Sales e-mail: orders@bb-elec.com
Technical Support: support@bb.elec.com
European Headquarters
B&B Electronics
Westlink Commercial Park
Oranmore, Co. Galway, Ireland
Phone +353 91-792444
Website: www.bb-europe.com
Sales e-mail: sales@bb-europe.com
Technical Support: support@bb-europe.com
Original April 2011
©2011 No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photography, recording, or any
information storage and retrieval system without written consent. Information in this manual is subject to change without notice, and does not represent a commitment on
the part.
B&B Electronics Manufacturing shall not be liable for incidental or consequential damages resulting from the furnishing, performance, or use of this manual. All brand
names used in this manual are the registered trademarks of their respective owners. The use of trademarks or other designations in this publication is for reference
purposes only and does not constitute an endorsement by the trademark holder.
Manual Documentation Number: EIRP410-2SFP-T-0912m i
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
Table of Contents
INTRODUCTION ..................................................................................................................... 1
The EIRP410-2SFP-T is an industrial Managed Ethernet switch that has 8 10/100TX PoE ports and 2
10/100/1000T/Mini-GBIC Combo ports. .............................................................................................................................. 1
Features ................................................................................................................................................................................... 1
Package Contents ................................................................................................................................................................... 2
HARDWARE DESCRIPTION .................................................................................................. 3
Physical Dimension ................................................................................................................................................................ 3
Front Panel ............................................................................................................................................................................. 3
Front Panel of the PoE Industrial Switch ............................................................................................................................ 3
Top View ................................................................................................................................................................................. 4
Top View of the PoE Injectors Industrial SwitchLED Indicators ..................................................................................... 4
LED Indicators ....................................................................................................................................................................... 5
Ports ......................................................................................................................................................................................... 6
RJ-45 ports ........................................................................................................................................................................... 6
2 Mini-GBIC combo port ..................................................................................................................................................... 8
Cabling .................................................................................................................................................................................... 8
Wiring the Power Inputs ..................................................................................................................................................... 11
Wiring the Fault Alarm Contact ......................................................................................................................................... 11
MOUNTING INSTALLATION ................................................................................................ 13
DIN-Rail Mounting .............................................................................................................................................................. 13
Wall Mount Plate Mounting ................................................................................................................................................ 15
NETWORK APPLICATION ................................................................................................... 16
Troubleshooting .................................................................................................................................................................... 17
TECHNICAL SPECIFICATION ............................................................................................. 18
Manual Documentation Number: EIRP410-2SFP-T-0912m 1
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
Introduction
The EIRP410-2SFP-T is an industrial Managed Ethernet switch that has 8 10/100TX PoE ports and 2 10/100/1000T/Mini-
GBIC Combo ports.
Features
System Interface/Performance
o RJ-45 ports support Auto MDI/MDI-X Function
o Embedded 8-ports PoE
o SFP (Mini-GBIC) supports 100/1000 Dual Mode
o Store-and-Forward Switching Architecture
o Back-plane (Switching Fabric): 5.6Gbps
o 1Mbits Packet Buffer
o 8K MAC Address Table
o Supports Wide Operating Temperature (-40oC ~ 75oC)
Power Supply
o Redundant Power Design
Case/Installation
o IP-30 Protection
o DIN Rail and Wall Mount Design
Relay Alarm
o Relay output for port breakdown, power fail and alarm
Manual Documentation Number: EIRP410-2SFP-T-0912m 2
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
Package Contents
8 Ports10/100 PoE with 2 combo 10/100/1000 or 100/1000 SFP Ports Industrial Switch
User manual
Pluggable Terminal Block
2 wall mount plates and 6 screws
One DIN-Rail (attached on the switch)
8 10/100TX + 2 10/100/1000T/100/1000 SFP Combo with 8 PoE Injectors Industrial Switch
User Manual block connector
Wall Mount Plate Screws DIN-Rail
81:111me .2 umwmmn mmmmmm mm Mun-«smu- mu mu mm
Manual Documentation Number: EIRP410-2SFP-T-0912m 3
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
Hardware Description
The following information is an introduction to the Industrial switchs hardware spec, port, cabling information, and
wiring installation will be described.
Physical Dimension
8 Ports10/100 PoE with 2 combo 10/100/1000 or 100/1000 SFP Ports Industrial Switch dimension (W x D x H) are
72mm x 105mm x 152mm
Front Panel
The Front Panel of the 8 Ports10/100 PoE with 2 combo 10/100/1000 or 100/1000 SFP Ports Industrial Switch is shown
as below:
Front Panel of the PoE Industrial Switch
PWRZ Fault PWR1 H m |_| 1A@24v V1-VI+ DC48V
Manual Documentation Number: EIRP410-2SFP-T-0912m 4
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
Top View
The top view of the 8 Ports10/100 PoE with 2 combo 10/100/1000 or 100/1000 SFP Ports Industrial Switch has one
terminal block connector of two DC power inputs.
Top View of the PoE Injectors Industrial Switch
Manual Documentation Number: EIRP410-2SFP-T-0912m 5
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
LED Indicators
The diagnostic LEDs located on the front panel of the industrial switch provide real-time information of operation and
status. The following table provides the description of the LED status and their meanings for the switch.
LED Status Meaning
PWR1
Green
Power 1 is active
OFF
No power inputs
PWR2
Green
Power 2 is active
OFF
No power inputs
Fault
Red Power input 1 or 2 is inactive
OFF Power 1 & Power 2 are both active or no power inputs
P9, P10 (RJ-45)
Upper
LED
Green Connected to network
Blinking Networking is active
OFF Not connected to network
Lower
LED
Green The port is operating at speed of 1000M
OFF The port is disconnected or not operating at speed of 1000M
Link/Active
(P9, P10)
Green
SFP port is linking
Blinks
Data is transmitting or receiving
OFF
Not connected to network
P1 ~ P8
(Green)
Green
Connected to network
Blinking Networking is active
OFF
Not connected to network
P1 ~ P8
(Yellow)
Yellow Ethernet port full duplex
Blinking Collision of packet occurs
OFF Ethernet port half duplex or not connected to network
FWD (P1 ~ P8) Green
A powered device is connected utilizing Power over Ethernet on
the port
OFF
No device is connected or power forwarding fails
MIDI-X MDI Signal N-me Recewe Dam plus (RD+) Irammn Dam plus (TD’) Reccn‘e mm mums [RD-) Tumsmlv Dm mmus (10-) Tmnsmu Dam plus (113+) Receive Data plus (mm Tmnsmn Dm mums (ID) Receive Dam mums (an) Swl uh Rmum m N J rt» 4.1 Wk 5 n» _.o Ian, 1 RD+4— I 2 R177 <—2 h»="" h)="" svaigm="" thwuqh="" came="" schemam:="" s\\1|c|\="" swnch="" 3="" td+="" 1l»="" 6="" td7="" 6="" td7="" i="" lam="" i="" rd+="" 2="" my="" 2="" rd7="" cross="" over="" came="" schemauc="">
Manual Documentation Number: EIRP410-2SFP-T-0912m 6
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
Ports
RJ-45 ports
The RJ45 copper ports support auto MDI/MDIX operation. This feature allows network connections to computers, servers, or
other switches using straight-through or crossover cables (See Figure below). Straight-through cable connections: pins 1, 2, 3
and 6, at one end of the cable, are connected straight-through to pins 1, 2, 3 and 6 at the other end of the cable. The table below
shows the 10BASE-T/100BASE-TX MDI and MDI-X port pin outs.
mm. ussun nusus «zs-sszs ms rm can sun-n 9mm... emu—men. me In! mm. 1mm: 5 cm 9mm E C will '5“! c. 1 —1m um um num- Inc-I a— a she Cnlnr 512mm 5 P c ElA/IIA 156w -Ov tracer p“ mm amwn/wnne Iratzv 7 1 We tracer arms nun-n 07"" 513mm Emu! 0mm! mu ElA/IIA 15633 mm m m nus or "am I I «Wanner 2 2 man mu emmamacmm cymmmmsmm vac-v mm was A
Manual Documentation Number: EIRP410-2SFP-T-0912m 7
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
Cross Over Cable Schematic
Manual Documentation Number: EIRP410-2SFP-T-0912m 8
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
2 Mini-GBIC combo port
2 auto-detect combo Giga ports RF45 or fiber. The gigabit Ethernet ports are shared with the mini-GBIC ports. RJ45
UTP (Gigabit Ethernet) ports can operate in half/full-duplex modes and work at speeds of 10/100/1000Mbps that support
auto-sensing technology to enable each port to detect the connecting speed. The mini-GBIC port is a socket for a mini-
GBIC (SFP) fiber transceiver.
Cabling
Use four twisted-pair, Category 5e or above cabling for RJ-45 port connection. The cable between the switch and
the link partner (switch, hub, workstation, etc.) must be less than 100 meters (328 ft.) long.
Use the mini-GBIC ports to uplink to another switch by inserting the mini-GBIC (SFP) transceiver.
To connect the transceiver and LC cable, please follow the steps shown below:
First, insert the transceiver into the SFP module. Notice that the triangle mark is the bottom of the module.
Figure 2.8: Transceiver to the SFP module
Manual Documentation Number: EIRP410-2SFP-T-0912m 9
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
Figure 2.9: Transceiver Inserted
Second, insert the fiber cable LC connector into the transceiver.
Figure 2.10: LC connector to the transceiver
To remove the LC connector from the transceiver, press the upper side of the LC connector to release from the
transceiver and pull it out.
Manual Documentation Number: EIRP410-2SFP-T-0912m 10
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
Figure 2.11: Remove LC connector
Second, push down the metal loop and pull the transceiver out by the plastic handle.
Figure 2.12: Pull out from the transceiver
Manual Documentation Number: EIRP410-2SFP-T-0912m 11
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
Wiring the Power Inputs
Wiring the Fault Alarm Contact
The fault alarm contact wired to pins 3 and 4 of the terminal block connector as the picture shows below. When the wires
are inserting the connected device will detect the fault status. The fault status includes power failure or port link failure.
Once one of the mentioned states occur an open circuit will exist. An application example for the fault alarm contact is
shown on the next page:
Note
The wire gauge for the terminal block should be in the range between
12-24 AWG.
,.__________ I I | Fault/Alarm Contact I ---- ______ ---‘-\---—-------. : The open cucuit will form when the | I puwerfans. I |________________I 24VDC Buzzer 24V Eanery | alarm sound or flash light I | wammg skgnallu warn the usar‘ ex: : I
Manual Documentation Number: EIRP410-2SFP-T-0912m 12
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
Rear Panel of me swnch
Manual Documentation Number: EIRP410-2SFP-T-0912m 13
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
Mounting Installation
DIN-Rail Mounting
The DIN-Rail is installed at the factory and maybe removed if needed.
1. First, insert the top of the DIN-Rail into the track.
Rear Panel of the switch
DIN-Rail
Manual Documentation Number: EIRP410-2SFP-T-0912m 14
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
2. Lightly push the DIN-Rail into the track.
3. Check the DIN-Rail to insure proper fit.
4. To remove the industrial switch from the track, reverse steps above.
Manual Documentation Number: EIRP410-2SFP-T-0912m 15
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
Wall Mount Plate Mounting
1. Remove the DIN-Rail from the industrial switch.
2. Install the wall mount plate on the rear panel of the industrial switch.
Data collect sewer J Pi—‘FE BOZGBTA PIFEVBOZGETA PIFE BOZGBTA Field Management Distribute IIO Programmable control system logic controller ' Serial Device Sewer J] Field Automatic device Field Automatic device Field Automatic device
Manual Documentation Number: EIRP410-2SFP-T-0912m 16
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
Network Application
This segment provides the samples to help user have more actual idea of industrial switch application. For a sample application
of the industrial switch, see the figures below.
Upllnk via Fiber Upllnk Vla UTPISTP PoE Industrial Switch Pawn over Ememei Power over Elhemei POE 501mm POWM om Ememg] Pwer over Eimmei Ememei Cable ' . WWW I» i. @ VOIP Phone IP Camera Wireless AP lEEE 80243af Compliant Powered Devices Non—POE Devices Pawer aver Emmi Power Cabie Emmi cable Power Cable
Manual Documentation Number: EIRP410-2SFP-T-0912m 17
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
Troubleshooting
Verify that you are using the appropriate power supply adapter. Do not use the power adapter with DC output higher than
the power rating of the device.
Select the proper UTP/STP cable to construct your network. Use unshielded twisted-pair (UTP) or shielded twisted-pair
(STP) cable for RJ-45 connections: 100Ω Category 3, 4 or 5 cable for 10Mbps connections, 100Ω Category 5 cable for
100Mbps connections. Insure the length of any twisted-pair connection does not exceed 100 meters (328 feet).
Diagnosing LED Indicators: The Switch can be easily monitored through panel LED’s. The LED’s will provide an easy
way of detecting power or communication problems.
If the Industrial switch LED indicators function normal and the connected cables are correct but the packets still cannot
transmit, please check your systems Ethernet devicesconfiguration or status. The Ping test is a common method to
check Ethernet devices connections on the network.
Smglc mode: 010411 km, 1 0 m 811 km, 1 31 55 0 nm (9/125 11m, 3.5 PS/(n111*kln)) 0 nm (9/125 11m, 19 PS/(n111*kln))
Manual Documentation Number: EIRP410-2SFP-T-0912m 18
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
Technical Specification
Standard
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX/FX
IEEE802.3ab 1000Base-T
IEEE802.3z Gigabit fiber
IEEE802.3x Flow Control and Back Pressure
IEEE802.3af Power over Ethernet
Protocol CSMA/CD
Transfer Rate 14,880 pps for 10Base-T Ethernet port
148,800 pps for 100Base-TX/FX Fast Ethernet port
1,488,000 pps for Gigabit Fiber Ethernet port
Packet Buffer 1Mbits
MAC address 8K MAC address table
LED
8 ports 10/100TX : Link/Activity (Green), Full duplex/Collision
(Yellow), Power Feeding (Green)
Giga port: Link/Activity (Green)
Per unit: Power 1 (Green), Power 2 (Green), Fault (Red)
Network Cable
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5, 5e cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/5E cable
EIA/TIA-568 100-ohm (100m)
1000Base-TX: 2-pair UTP/STP Cat. 5E cable
EIA/TIA-568 100-ohm (100m)
Optical cable
Distance:
Multi mode:
0 to 5 km, 1300 nm (50/125 μm, 800 MHz*km)
0 to 4 km, 1300 nm (62.5/125 μm, 500 MHz*km)
Single mode:
0 to 40 km, 1310 nm (9/125 μm, 3.5 PS/(nm*km))
0 to 80 km, 1550 nm (9/125 μm, 19 PS/(nm*km))
Manual Documentation Number: EIRP410-2SFP-T-0912m 19
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
Min. TX Output:
Multi mode: -20 dBm
Single mode: 0 to 40 km, -5 dBm; 0 to 80 km, -5 dBm
Max. TX Output:
Multi mode: -14 dBm
Single mode: 0 to 40 km, 0 dBm; 0 to 80 km, 0 dBm
Sensitivity:
-36 to -32 dBm (Single mode); -34 to -30 dBm (Multi mode)
Back-plane (Switching
Fabric) 5.6Gbps
Packet throughput
ability 8.3Mpps at 64bytes
Power Supply External Power Supply: DC 48V
Redundant power DC 48V with connective removable terminal block
Power Consumption 140 Watts (maximum)
Install DIN rail kit and wall-mount ear for DIN-type cabinet install and wall
mounting
Operating Temperature -40oC ~ 75oC (Wide Operating Temperature model)
-10oC ~ 60oC (standard model)
Operating Humidity 5% to 95% (Non-condensing)
Storage Temperature -40oC to 85oC
Case Dimension IP-30, 72 mm (W) x 105 mm (D) x 152mm (H)
EMI
FCC Class A
CE EN61000-4-2/3/4/5/6/8/11/12
CE EN61000-6-2
CE EN61000-6-4
Manual Documentation Number: EIRP410-2SFP-T-0912m 20
B&B Electronics Mfg Co Inc 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 www.bb-elec.com
B&B Electronics Westlink Commercial Park Oranmore, Galway, Ireland Ph +353 91-792444 Fax +353 91-792445 www.bb-europe.com
Safety UL
cUL
CE/EN60950-1
Stability testing IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)

Products related to this Datasheet

GIGABIT POE (8) 10/100, (2) SFP