This presentation will introduce the 3 different grades of the 3-Pin XLR Cable Assemblies offered by Io Audio Technologies.

This presentation will introduce the ODU MINI-MED® Connector Series.

The purpose of this presentation is to present the basic concepts of Thread.

This presentation will provide an overview of the features and benefits and some insight on the target markets and applications for NXP’s QorIQ T-Series.

This presentation will introduce the features, advantages and applications for the Layerscape LS1046A System on Chip from NXP Semiconductor.

Introduction to the MAX34417 high performance power accumulator including features and benefits, typical configurations, and design challenges it addresses

This is an overview of CUI’s AE series of wide input DC-DC converters, including their benefits, features, and use in renewable energy applications

This presentation shows the technical and functional requirements needed for routing solutions in today’s world and how NXP’s Layerscape family of SoCs addresses them.

A range of wireless components, including metal/PCB/FPCB, chip, patch, and active antennas.

An introduction to Maxim's MAX98357 and MAX98358 digital amplifier, including its features and benefits, ease of use, target markets, and applications.

This presentation will provide an overview of the Chip Ferrite Beads offered by Murata.

TS Series features contactless hall effect technology, analog output, and 1 million lifecycles.

This presentation will provide a general overview of the THM and THM-WI family of Medical Approved DC/DC Converters.

This presentation will discuss the features and benefits, product line-up, and applications for the NTC LUG Temperature Sensors.

Overview of the MM35-DIN Series NTC Theristor Inrush Current Limiter, including applications, features, and educational information.

Small size, wide capacitance range, and low ESR for high frequency applications a few of attractive features leading to their increase in popularity.

Overview of key features, power ratings, thermal, and mechanical characteristics of the TPP 450 series, as well as medical guidelines for 2XMOPP rating.

This presentation will provide an overview of Ethernet networks.

Using a SoC FPGA from Intel, designers can upgrade both the accelerators as well as software after a product has been deployed

Introducing Silicon Carbide advantages over silicon-based products, as well as an explanation of how their unique characteristics can benefit existing power solutions.

This presentation highlights this +/-40 V high-speed USB port protector for industrial applications.

Overview of chip ferrite beads for automotive market, as well as a review of EMI compliance, software design tools, and products available.

Overview of chip resistor construction, resistor networks, current sense resistors, Yageo's thin and thick film product offerings.

ROHM’s PICOLED series of products are designed for applications where board space is limited and smaller, lower profile components are advantageous.

This presentation will introduce the CAN transceivers as well as MAX13054A.

This presentation is intended to guide the user in selecting the proper II-VI Marlow thermoelectric module.

Basic introduction to the MxL7704, highlighting features and benefits, voltage and sequencing specifics, and basic operational features.

This presentation will explain low profile switches and their applications.

Overview of the families of chip RF inductors offered by Murata.

A product overview of three different types of ROHM LEDs will be covered: PICOLED RGB, SMLVN6 RGB LED, and MSL0101 RGB LEDs.

Introduction to the QN908x, including its features and benefits, target markets, applications, enablement, and a design example.

The basics of a modular jack connector, its common uses, markets, and applications, and signaling techniques used.

CC-Link is the high-speed field network which can simultaneously handle both control and information data flows

This presentation will provide an overview of the RZ/A MPUs from Renesas.

This presentation will introduce the automotive eMMC Memory Storage from Panasonic.

Overview of Yageo metal current sense resistors, including PE, PA, PU, and PS lines.

With thousands of 3D CAD models available, learn how they can help the selection and purchase decision.

Minimal reverse recovery behavior of the parasitic diode and supports high-speed switching.

Introduction to the MAX40658 and MAX40659, including features and benefits, typical configurations, and design challenges they address.

SiC modules are ideally suited to replace higher current rating IGBT modules.

This presentation will introduce the LPC80x Family of MCUs from NXP.

This module will provide an overview on how to select the proper fan for forced air cooling.

This presentation will introduce the LPC51U68 MCU from NXP's LPC product line.

Overview of Tetra features and benefits, main application types, and various Tetra product model offerings.

IGBT is a transistor used in power applications that combines the simple gate drive characteristics of a MOSFET and low saturation voltage of a BJT.

This presentation will highlight Winbond’s SDRAM Memory Basic Introduction.

An overview of the 7700 series ribbon cable, highlighting key product features and typical applications.

Introduction to the LP35 Series of Encoders, including key benefits and features, programmability feature, and ideal applications.

Introducing the Y4BH and Y5BH impedance matching connectors, defining differential signaling vs impedance matching, and giving application examples for the Y4BH and Y5BH series.

This presentation will provide a basic understanding of High Current Fuses and Fuse Holders, where they are used, and Riedon’s available offerings.

An overview of stepper motor drivers and shunt resistors, as well as their capabilities and typical applications.

An introduction to safety relays and their features, including applications and Panasonic's product line-up.

This presentation will give an overview of Maxim's MAX30001 part and the portfolio.

Familiarizing engineers, designers, and customers with the RAFIX 22QR Switch Control Components.

This presentation will introduce the Red Pitaya STEMlab Device from Trenz.

Introduction to the MAX14866 16-channel high voltage analog switch

An overview of the human presence IR sensor products from AKM, including features, individual devices, and a comparison between quantum sensors and traditional pyroelectric types.

This presentation will provide an introduction to Signal's line of EcoTran Standard Series Transformers.

This presentation will provide an overview of ROHM's Power Management Products for Consumer Electronics.

An introduction to basic operation, electrical characteristics, product portfolio, features and benefits, and applications for TMOVs.

This presentation will provide an introduction to Wide FOV Sensors from Panasonic.

This presentation will provide overview of the Himalaya Power Modules from Maxim Integrated.

An overview of SSD security/encryption methods, including encryption introduction, types, techniques, and compliance testing.

Viking Technology employs state of the art Automated Test Equipment to perform Functional and Parametric testing on various generations of memory

This presentation will give an overview of the features and benefits, as well as the board layout and design specifications.

Overview of asset tracking data loggers in the IoT space, as well as features and advantages of ROHM's product offering.

An overview and design example of AKM's 3D magnetic smart switch sensor, as well as the advantages of a 3D sensor versus a single axis sensor.

ROHM plays a major role in defining the wireless power specifications that are developed by both WPC and AirFuel group

Overview of the IEC 60601-1 medical design standards as well as an introduction to CUI's line of internal and external certified products for this line.

A guide for selecting the proper thermoelectric generator, including an overview and data sheet information on the product.

This presentation will go over the ODU MINI-SNAP® L Series Circular Push-Pull Locking Connectors.

Overview of the ODU MEDI-SNAP® Circular Connector, including potential markets and applications, as well as certifications available.

This presentation will go over the ODU MINI-SNAP® K Series Circular Push-Pull Locking Connectors.

Inline flow-through temperature sensors are NTC based sensors designed to monitor the temperature of a fluid passing through it

An introduction of the Synergy software package v.1.4.0, focusing on features and enhancements.

USB Type C was introduced to allow more power (15 W) over a reversible USB port and eliminate the need for a separate power cable

The purpose of this PTM is to explain RECOM's portfolio of DIN-Rail Mounted Power Supplies.

This presentation will define and explain common SSD features as they apply to industrial SSDs.

Outlining high density memory module solutions that address SWaP conditions.

The 2.0mm pitch M22 connector family is available in male and female headers that come in single or dual rows and meet RoHS compliance.

This presentation will provide a guideline of the TIA standards and the M.I.C.E. guidelines that are offered by Panduit.

This presentation will provide an overview of SV’s solderless edge launch PCB connector product line.

An introduction of Wurth's white LEDs, including their benefits, construction, technical parameters, and application examples.

This presentation will provide an introduction to Schaffner's RT Choke Series.

An overview of the Condor single board computer for embedded computing applications.

This presentation will introduce the i.MX 8M Application Processor, and give an overview of the target markets and applications.

The ECF40 is a 40 W AC-DC open frame power supply in a compact package and with an incredibly low profile making it one of the smallest 40 W power supplies XP has ever produced

This presentation will cover the different series that are available from NKK Switches and the features and benefits offered.

This presentation will provide an overview of Würth Electronics Chip LED product offerings and benefits.

This presentation will provide an overview of Würth Electronics PLCC LED product offerings and benefits.

The innovative electrical and mechanical design of the JSU series coupled with UL’s recognized safety mark makes it ideal for an array of applications

This presentation will overview the different High Power LED Series of Würth Electronics

This presentation will discuss the features, applications, and product line-up for the Archer Kontrol connector.

Overview of GaN versus Silicon Carbide in DC-DC hard switched synchronous boost converter, including a competitive analysis and PFC customer example.

CUI's Electret Condenser Microphones convert sound into an electrical signal and are commonly used in telephones, GPS, hearing aids, and more.

An introduction to the RX130 MCUs, the capacitive touch key solution and evaluation board,and development environment.

This presentation will introduce Vishay's Automotive Qualified Platinum Thin Film RTD Sensors (PTS AT series), which are used for temperature sensing and measurement applications.

This presentation will discuss the common design challenges and the features and benefits of the MAX12900.

This presentation will provide an overview of SSD Industry Standards of Quality.

This presentation will introduce the SmartSwitch® Development Kits from NKK Switches.