QTH-yyy-yy-y-D-yyy Series Drawing

Samtec Inc.

View All Related Products | Download PDF Datasheet

Datasheet

THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
DO NOT
SCALE FROM
THIS PRINT
"C"
REF
.745
REF
18.9
"D"
REF
.038 0.95
REF
"A"
"A"
T-1G1-XX-X
QTH-30-XX-D-XX-A
FIG 1
-A: ALIGNMENT PIN OPTION
(STYLE -01 & -02 ONLY)
(QTH-090-01-X-D-A SHOWN)
"A"
.155
REF
3.9
(SEE NOTE 12)
.008
REF
0.2
.644
REF
16.4
.235 5.97
REF
=
.571 14.50
(TYP)
29 EQ SPCS @
.0197[.500]
.047
REF
1.19
.7875 20.003
(TYP)
02
01
C
QTH-XXX-XX-X-D-XXX
No OF POSITIONS
-030, -060, -090,
*-120, *-150 (PER ROW)
* (SEE NOTE 11)
ROW SPECIFICATION
-D: DOUBLE (USE QTH-30-XX-D-XX
& QTHH-30-XX-D-XX)
OPTION
PLATING SPECIFICATION
-F: 3 µ'' SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(USE T-1SXX-XX-F & T-1GXX-XX-F) (SEE NOTE 7)
-L: 10 µ'' SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(USE T-1SXX-XX-L & T-1GXX-XX-L)
-H: 30 µ'' GOLD IN CONTACT AREA,
3 µ'' GOLD ON TAIL
(USE T-1SXX-XX-H & T-1GXX-XX-G)
-C: 50 µ'' SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(USE T-1SXX-XX-C, T-1GXX-XX-L)
LEAD STYLE
-01: .1680[4.267]
-02: .2861[7.264]
-03: .4043[10.269]
-04: .6001[15.246]
-05: .7181[18.240]
-06: .8361[21.237]
-07: .9542[24.237]
-08: 1.1511[29.238]
-09: .5224[13.269]
-10: .5618[14.269]
= SEE TABLE 6, SHT 3
-LC: LOCKING CLIPS
(USE LC-08-TM-01, SEE FIG 2, SHT 2))
-A: ALIGNMENT PINS
(USE QTH-30-XX-D-XX-A FOR -01 & -02)
(FOR -03 THRU -10 SEE TABLE 6, SHT 3)
-K: POLYIMIDE FILM (USE K-DOT-.276-.375-.005)
(AVAILABLE ON -01 THRU -04, -09 & -10 ONLY)
(SEE FIG 4, SHT 2)
-TR: TAPE & REEL (-090 POS MAX)
(-060 POS MAX W/ -GP OPTION)
(N/A ON -05 THRU -08)
(SEE FIG 12, SHT 6)
-GP: GUIDE POSTS
(AVAILABLE ON -01 & -02 ONLY)
(USE QTH-30-XX-D-XX-X-GP)
(SEE FIG 8, SHT 4)
-FL: FRICTION LOCKS (SEE FIG 9, SHT 4)
(NOT AVAILABLE WITH -GP)
-RT1: RETENTION OPTION (SEE FIG 10, SHT 5)
(ONLY AVAILABLE ON -01 LEAD STYLE)
(MUST USE -A OPTION)
(USE QTH-30-01-D-XX-A-RT1 & T-1R36-01-F)
(NOT AVAILABLE WITH -LC, -GP, OR -FL)
-L: LATCHING OPTION (SEE FIG 11, SHT 5)
(ONLY AVAILABLE ON -01 LEAD STYLE)
(USE QTH-30-01-D-XX-L)
(NOT AVAILABLE WITH -LC, -GP, -FL, OR -RT1)
(-060 POS MAX)
"B"
-
.002
+
.003
(SEE NOTE 5 & 8)
.098
REF
2.49
.015
REF
0.4
.031
REF
0.8
.280 7.11
.155
±.003
3.94
±0.08
(SEE NOTE 12)
SECTION "A"-"A"
C
[0.08]
[0.03]
T-1SXX-XX-X
(SEE TABLE 1)
(SEE NOTE 10)
C
C
SEE TABLE 3
(SEE NOTE 8)
.080 2.03
REF
.035 0.89
REF
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01[0.3] 2
.XXX:
.005[0.13]
.XXXX:
.0020[0.051]
MATERIAL:
.5mm DOUBLE ROW HS TERMINAL ASSEMBLY
BY:
QTH-XXX-XX-X-D-XXX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
DEAN P
09-14-2010
6
1
SHEET SCALE: 1.75:1
INSULATOR: LCP UL94V-0, COLOR: BLACK
TERMINAL & GROUND PLANE: PHOS BRONZE
F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-XXX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: 6 OZ FOR –01 & -02, 8 OZ FOR –03 THRU –10.
3. MINIMUM GROUND PLANE RETENTION: 1 LB.
4. PARTS TO BE MOLDED TO POSITION.
5. MAXIMUM VARIANCE OF .002 [0.05]. APPLIES TO SIGNAL OR GROUNDS
INDEPENDENT OF THE GROUND OR SIGNAL PINS RESPECTIVELY.
6. LEAD STYLES -03 THRU -10: TOP BODY (QTH) CANNOT HAVE -A OPTION.
7. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
8. GROUND PLANE PRESS HEIGHT MUST BE .003 [0.07] LESS THAN THE MAXIMUM HEIGHT
OR .002 [0.05] GREATER THAN THE MINIMUM HEIGHT OF SIGNAL PIN.
9. T-1R36 RETENTION TO BODY TO BE 1.0 LBF.
10. CUT OFF BURR NOT TO EXCEED .003 [0.08] IN ANY DIRECTION, BURR PLUS TAB
HEIGHT NOT TO EXCEED .006 [0.15].
11. FOR NEW APPLICATIONS REQUIRING THESE POSITIONS, PLEASE CONTACT SAMTEC
INTERCONNECT PROCESSING GROUP.
12. MAXIMUM PIN CAN EXTEND PAST WALL .003 [0.08]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION BJ
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
"R"
REF
"S"
±.020
[0.51]
.276 7.01
.020
±.020
0.51
±0.51
FIG 4
-K: POLYIMIDE FILM PAD OPTION
(USE K-DOT-.276-.375-.005)
C
C
"T"
.035
REF
0.89
"D"
REF
(SEE TABLE 2, SHT 1)
FIG 3
-A: ALIGNMENT PIN OPTION
(QTH-090-05-X-D-A SHOWN)
(SAME AS FIG 1, EXCEPT AS SHOWN)
(STYLES -03 THRU -09, SEE TABLE 6, SHT 3)
QTHH-30-XX-D-XX-A
QTH-30-02-D-XX (SEE NOTE 6)
.038 1.0
REF
.080 2.03
REF
C
L
.055 1.40
.010 0.25
REF
"D"
(SEE TABLE 2, SHT 1)
QTH-30-XX-D-XX
FIG 2
-LC LOCKING CLIP OPTION
(QTH-090-01-X-D-LC SHOWN)
(SAME AS FIG 1, EXCEPT AS SHOWN)
C
.0800 2.032
.056 1.42
REF
LC-08-TM-01
C
L
SHEET OF
.5mm DOUBLE ROW HS TERMINAL ASSEMBLY
BY:
QTH-XXX-XX-X-D-XXX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
DEAN P
09-14-2010
6
2
SHEET SCALE: 1.75:1
REVISION BJ
F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
.278
REF
7.07
.010
REF
0.25
.118
REF
3.00
.055 1.40
"B"
"B"
FIG 5
(QTH-090-03-X-D-LC SHOWN)
(SAME AS FIG 1, EXCEPT AS SHOWN)
T-1G1-XX-X
QTHH-30-01-D-XX
QTH-30-02-D-XX (SEE NOTE 6)
C
.265
REF
6.73
.0800 2.032
C
L
"E"
-
.001
+
.003
(SEE NOTE 5 & 8)
.281 7.14
.037
REF
0.94
.155
±.003
3.94
±0.08
.053 1.33
'H'
SECTION "B"-"B"
T-1S60-XX-X
SEE NOTE 10
[0.08]
[0.03]
C
C
.432 10.97
REF
"C"
"C"
FIG 6
(QTH-090-05-X-D SHOWN)
(SAME AS FIG 5, EXCEPT AS SHOWN)
QTHH-30-03-D-XX
.600 15.24
REF
"D"
"D"
FIG 7
(QTH-090-07-X-D SHOWN)
(SAME AS FIG 5, EXCEPT AS SHOWN)
QTHH-030-04-D-XX
"E"
-
.001
+
.003
(SEE NOTE 5 & 8)
.155
±.003
3.94
±0.08
SECTION "C"-"C"
SCALE 1.25 : 1
T-1S60-XX-X
T-1G1-XX-X
C
SEE NOTE 10
[0.08]
[0.03]
C
"E"
-
.001
+
.003
(SEE NOTE 5 & 8)
.155
±.003
3.94
±0.08
SECTION "D"-"D"
SCALE 1.25 : 1
T-1S61-XX-X
T-1G17-XX-X
SEE NOTE 10
C
[0.08]
[0.03]
C
.003
MAX
0.08
TAB HEIGHT
.006
MAX BURR
0.15
+ TAB HEIGHT
DETAIL 'H'
SCALE 8 : 1
SHEET OF
.5mm DOUBLE ROW HS TERMINAL ASSEMBLY
BY:
QTH-XXX-XX-X-D-XXX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
DEAN P
09-14-2010
6
3
SHEET SCALE: 1:0.571429
REVISION BJ
F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
"F"
REF
"G"
REF
.125
REF
3.18
FIG 8
(QTH-090-01-X-D-GP SHOWN)
(SAME AS FIG 1, EXCEPT AS SHOWN)
(AVAILABLE ON -01 & -02 ONLY)
SEE TABLE 8
C
L
C
"H"
.233 5.91
REF
.070
REF (TYP)
1.78
FIG 9
-FL: FRICTION LOCKS
(NOT AVAILABLE WITH -GP OPTION)
(SAME AS FIG 1, EXCEPT AS SHOWN)
QTH-30-XX-D-XX-X-FL
'E'
'F'
.008 0.20
REF
.015
REF
0.38
DETAIL 'E'
SCALE 12 : 1
.012 0.30
REF
.015
REF
0.38
DETAIL 'F'
SCALE 12 : 1
SHEET OF
.5mm DOUBLE ROW HS TERMINAL ASSEMBLY
BY:
QTH-XXX-XX-X-D-XXX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
DEAN P
09-14-2010
6
4
SHEET SCALE: 2:1
REVISION BJ
F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
"J"
REF
FIG 10
(QTH-090-01-X-D-A-RT1 SHOWN)
(NOT AVAILABLE WITH -LC, -GP, OR -FL OPTIONS)
(AVAILABLE ON -01 ONLY)
(SAME AS FIG 1, EXCEPT AS SHOWN)
C
L
QTH-30-01-D-XX-X-RT1
C
.190 4.83
.100
REF
2.54
.070 1.78
REF
"K"
±.004
[0.01]
T-1R36-01-F (2 PLCS)
C
C
.062
REF
1.57
.069 1.76
REF
"M"
.010 0.25
REF (TYP)
.053
±.002
1.35
±0.05
"N"
C
C
C
QTH-30-01-D-XX-L
WT-56-01-T
T-1S39-01-XXX
"L"
REF
FIG 11
L: LATCHING OPTION
(QTH-060-01-X-D-L SHOWN)
(AVAILABLE ON -01 LEAD STYLE ONLY)
(NOT AVAILABLE WITH -LC, -GP, -FL, OR -RT1 OPTIONS)
(SAME AS FIG 1, EXCEPT AS SHOWN)
.025
0.64
REF
.020 0.50
REF
C
L
(* = NOT RELEASED)
SHEET OF
.5mm DOUBLE ROW HS TERMINAL ASSEMBLY
BY:
QTH-XXX-XX-X-D-XXX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
DEAN P
09-14-2010
6
5
SHEET SCALE: 2:1
REVISION BJ
F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
USER DIRECTION OF UNREELING
POCKET NOT DETAILED
"H" "H"
SECTION "H"-"H"
SCALE 1.5 : 1
FIG 12
-TR: TAPE & REEL
(QTH-090-01-X-D-LC-TR SHOWN)
(-090 POS MAX)
(-060 POS MAX W/-GP OPTION)
(N/A ON -05 THRU -08)
(SAME AS FIG 1, EXCEPT AS SHOWN)
SHEET OF
.5mm DOUBLE ROW HS TERMINAL ASSEMBLY
BY:
QTH-XXX-XX-X-D-XXX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
DEAN P
09-14-2010
6
6
SHEET SCALE: 1:1
REVISION BJ
F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322

Products

.5MM DOUBLE ROW MI SOCKET ASSEMB
Cantidad disponible1799
Precio por unidad13.62
CONN HEADER 60POS 0.5MM SMT
Cantidad disponible341
Precio por unidad8.2
CONN HEADER 40POS 0.5MM SMT
Cantidad disponible6017
Precio por unidad8.76
.5MM DOUBLE ROW MI SOCKET ASSEMB
Cantidad disponible346
Precio por unidad9.38
.5MM DOUBLE ROW MI SOCKET ASSEMB
Cantidad disponible772
Precio por unidad18.64
CONN HEADER HS .5MM 60POS DL AU
Cantidad disponible4891
Precio por unidad11.02
CONN HEADER HS .5MM 60POS DL AU
Cantidad disponible619
Precio por unidad11.36
CONN HEADER HS .5MM 120POS DL AU
Cantidad disponible5784
Precio por unidad12.06
CONN HEADER HS .5MM 120POS DL AU
Cantidad disponible1026
Precio por unidad12.41
CONN HEADER 60POS 0.5MM SMT
Cantidad disponible891
Precio por unidad12.68
.5MM DOUBLE ROW MI SKT ASSY
Cantidad disponible1206
Precio por unidad13.44
CONN HEADER HS .5MM 180POS DL AU
Cantidad disponible1622
Precio por unidad15.81
CONN HEADER HS .5MM 180POS DL AU
Cantidad disponible3294
Precio por unidad16.3
CONN HEADER HS .5MM 60POS DL AU
Cantidad disponible583
Precio por unidad16.61
CONN HEADER HS .5MM 60POS DL AU
Cantidad disponible453
Precio por unidad17.16
CONN HEADER HS .5MM 120POS DL AU
Cantidad disponible332
Precio por unidad18.98
CONN HEADER HS .5MM 180POS DL AU
Cantidad disponible705
Precio por unidad23
CONN HEADER HS .5MM 180POS DL AU
Cantidad disponible179
Precio por unidad23.75
.5MM DOUBLE ROW MI SOCKET ASSEMB
Cantidad disponible584
Precio por unidad11.06
.5MM DOUBLE ROW MI SOCKET ASSEMB
Cantidad disponible254
Precio por unidad8.44