LUXEON Rebel White Datasheet

Lumileds

Download PDF Datasheet

Datasheet

ILLUMINATION
DS64 LUXEON Rebel General Purpose Product Datasheet ©2016 Lumileds Holding B.V. All rights reserved.
RoHS
COMPLIANT
The LUXEON Rebel general purpose white line of LEDs are ideal for all
lighting and illumination applications. These flux differentiated parts,
like all other LUXEON Rebel LEDs, provide the industry’s best lumen
maintenance, superior reliability and quality white light that make them
the most widely used power LEDs today.
LUXEON Rebel
General purpose white
FEATURES AND BENEFITS PRIMARY APPLICATIONS
Deliver more usable light and higher flux density Outdoor
Optimize applications to reduce size and cost Specialty
Small footprint to tightly pack the LEDs for mixing
Utilize standard FR4 PCB technology for simplify manufacturing
through the use of surface mount technology
UL-recognized component [E327436]
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 2
General Product Information .....................................................................................................................................3
Product Nomenclature .........................................................................................................................................3
Average Lumen Maintenance Characteristics .................................................................................................3
Environmental Compliance ..................................................................................................................................3
Luminous Flux Characteristics ...................................................................................................................................4
Flux Performance, Binning, and Supportability ................................................................................................4
Optical Characteristics ................................................................................................................................................5
Electrical Characteristics .............................................................................................................................................6
Absolute Maximum Ratings .................................................................................................................................7
JEDEC Moisture Sensitivity ..................................................................................................................................7
Reflow Soldering Characteristics ..............................................................................................................................8
Mechanical Dimensions ...............................................................................................................................................9
Pad Configuration ...................................................................................................................................................... 10
Solder Pad Design ............................................................................................................................................... 10
Wavelength Characteristics ..................................................................................................................................... 11
Typical Light Output Characteristics over Temperature ................................................................................... 12
Typical Forward Current Characteristics ............................................................................................................. 13
Typical Relative Luminous Flux ............................................................................................................................... 14
Current Derating Curves ......................................................................................................................................... 15
Typical Radiation Patterns ........................................................................................................................................ 17
Emitter Pocket Tape Packaging ................................................................................................................................ 18
Emitter Reel Packaging ............................................................................................................................................. 19
Product Binning and Labeling .................................................................................................................................. 20
Luminous Flux Bins .................................................................................................................................................... 21
Cool-White Bin Structure ................................................................................................................................ 22
Neutral-White Bin Structure ........................................................................................................................... 24
Forward Voltage Bins ................................................................................................................................................. 25
Table of Contents
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 3
Product Nomenclature
LUXEON Rebel is tested and binned at 350 mA, with current pulse duration of 20 ms. All characteristic charts where the thermal pad is kept
at constant temperature (25ºC typically) are measured with current pulse duration of 20 ms. Under these conditions, junction temperature and
thermal pad temperature are the same.
The part number designation is explained as follows:
L X M L - A B C D - E F G H
Where:
A — designates radiation pattern (value P for Lambertian)
B — designates color (W = White)
C — designates tint variant (C = Cool-White or N = Neutral-White)
D — designates test current (value 1 for 350 mA)
E — reserved for future product offerings
FGH — minimum luminous flux (lm)
Therefore products tested and binned at 350 mA follow the part numbering scheme:
L X M L - P W x 1 - 0 x x x
Average Lumen Maintenance Characteristics
Lumen maintenance for solid-state lighting devices (LEDs) is typically defined in terms of the percentage of initial light output remaining after a
specified period of time. Lumileds projects that LUXEON Rebel products will deliver, on average, 70% lumen maintenance (L70) at 50,000
hours of operation at a forward current of up to 700 mA. This projection is based on constant current operation with junction temperature
maintained at or below 135°C. This performance is based on independent test data, Lumileds historical data from tests run on similar
material systems, and internal LUXEON reliability testing. Observation of design limits included in this data sheet is required in order to achieve this
projected lumen maintenance.
Environmental Compliance
Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Rebel is compliant to the
European Union directives on the restriction of hazardous substances in electronic equipment, namely the REACH and RoHS directives. Lumileds
will not intentionally add the following restricted materials to the LUXEON Rebel: lead, mercury, cadmium, hexavalent chromium, polybrominated
biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).
General Product Information
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 4
Luminous Flux Characteristics for LUXEON Rebel,
Thermal Pad Temperature=25°C
Table 1.
Performance at Test Current Typical Performance
at Indicated Current
Color Part Number Minimum Luminous Test Typical Luminous Drive
Flux (lm) Current Flux (lm) Current
FV
[1] (mA) FV
[2] (mA)
LXML-PWC1-0090 90 350 160 700
LXML-PWC1-0100 100 350 180 700
LXML-PWC1-0110 110 350 200 700
LXML-PWC1-0120 120 350 220 700
LXML-PWN1-0090 90 350 160 700
LXML-PWN1-0100 100 350 180 700
LXML-PWN1-0110 110 350 200 700
LXML-PWN1-0120 120 350 220 700
Notes for Table 1:
1. Minimum luminous flux performance guaranteed within published operating conditions. Lumileds maintains a tolerance of ± 6.5%
on flux measurements.
2. Typical luminous flux performance when device is operated within published operating conditions.
Flux Performance, Binning, and Supportability
LEDs are produced with semiconductor technology that is subject to process variation, yielding a range of flux performance that is approximately
Gaussian in nature. In order to provide customers with fine granularity within the overall flux distribution, Lumileds separates LEDs into fixed, easy
to design with, minimum luminous flux bins. To verify supportability of parts chosen for your application design, please consult your
Lumileds representative.
Luminous Flux Characteristics
Cool White
Neutral-White
Volume
Luminous Flux Bins
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 5
Lambertian LUXEON Rebel at Test Current [1]
Thermal Pad Temperature = 25°C
Table 2.
Typical
Total Typical
Included Viewing
Color Temperature [2, 3, 4] Angle
[6] Angle
[7]
CCT (degrees) (degrees)
Color [7, 8] Min. Typ. Max. u0.90V
[5] 2u 1/2
Cool-White 4500K 6500K 10,000K 160 120
Neutral-White 3500K 4100K 4500K 160 120
Notes for Table 2:
1. Test current is 350 mA for all LXML-PWx1-0xxx products.
2. CCT ±5% tester tolerance.
3. Typical CRI (Color Rendering Index) for cool-white and neutral-white is 70.
4. Minimum CRI (Color Rendering Index) for cool-white and neutral-white is 65.
5. Total angle at which 90% of total luminous flux is captured.
6. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
7. All white products are built with Indium Gallium Nitride (InGaN).
8. Cool-white and neutral-white power light sources represented here are IEC825 class 2 for eye safety.
Optical Characteristics
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 6
Electrical Characteristics at 350 mA for LUXEON Rebel,
Part Numbers LXML-PWx1-0xxx, Thermal Pad Temperature = 25ºC
Table 3.
Typical Temperature Typical Thermal
Coefficient of Resistance
Forward Voltage Vf [1] Forward Voltage [2] Junction to
(V) (mV/°C) Thermal Pad (°C/W)
Color Min. Typ. Max. DVf / DTJ Ru J-C
Cool-White 2.55 3.00 3.99 -2.0 to -4.0 10
Neutral-White 2.55 3.00 3.99 -2.0 to -4.0 10
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Measured between 25°C = TJ = 110°C at If = 350 mA.
Typical Electrical Characteristics at 700 mA for LUXEON Rebel,
Part Numbers LXML-PWx1-0xxx, Thermal Pad Temperature = 25ºC [2]
Table 4.
Typical Forward Voltage Vf
[1]
Color (V)
Cool-White 3.20
Neutral-White 3.20
Notes for Table 4:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Measured between 25°C = TJ = 110°C at If = 700 mA.
Electrical Characteristics
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 7
Absolute Maximum Ratings
Table 5.
Parameter Cool-White/Neutral-White
DC Forward Current (mA) 1000
Peak Pulsed Forward Current (mA) 1000
Average Forward Current (mA) 1000
ESD Sensitivity < 8000V Human Body Model (HBM)
Class 2 JESD22-A114-B
< 400V Machine Model (MM)
Class 2 JESD22-A115-B
LED Junction Temperature [1] 150°C
Operating Case Temperature at 350 mA -40°C - 135°C
Storage Temperature -40°C - 135°C
Soldering Temperature JEDEC 020c 260°C
Allowable Reflow Cycles 3
Autoclave Conditions 121°C at 2 ATM
100% Relative Humidity for 96 Hours Maximum
Reverse Voltage (Vr) See Note 2
Notes for Table 5:
1. Proper current derating must be observed to maintain junction temperature below the maximum.
2. LUXEON Rebel LEDs are not designed to be driven in reverse bias.
JEDEC Moisture Sensitivity
Table 6.
Soak Requirements
Level Floor Life Standard
Time Conditions Time Conditions
1 unlimited [ 30°C / 168h 85°C / 85%
85% RH + 5 / -0 RH
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 8
Table 7.
Profile Feature Lead Free Assembly
Ramp-Up Rate (TL to Tp) 3°C / second max
Preheat Temperature Min (Tsmin) 150°C
Preheat Temperature Max (Tsmax) 200°C
Preheat Time (tsmin to tsmax) 60 - 180 seconds
Temperature (TL) 217°C
Time Maintained Above Temperature TL (tL) 60 - 150 seconds
Peak / Classification Temperature (TP) 260°C
Time Within 5°C of Actual Peak Temperature (tP) 20 - 40 seconds
Ramp-Down Rate (Tp to TL) 6°C / second max
Time 25°C to Peak Temperature 8 minutes max
Notes for Table 7:
- All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body.
Reflow Soldering Characteristics
JEDEC 020c
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 9
Mechanical Dimensions
Figure 1. Package outline drawing.
Notes for Figure 1:
- Do not handle the device by the lens—care must be taken to avoid damage to the lens or the interior of the device that can be damaged by
excessive force to the lens.
- Drawings not to scale.
- All dimensions are in millimeters.
- The Thermal Pad is electrically isolated from the Anode and Cathode contact pads.
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 10
Pad Configuration
Note for Figure 2:
- The Thermal Pad is electrically isolated from the Anode and Cathode contact pads.
Solder Pad Design
Note for Figure 3:
- The photograph below shows the recommended LUXEON Rebel layout on Printed Circuit Board (PCB). This design easily achieves a thermal
resistance of 7K/W.
- Application Brief AB32 provides extensive details for this layout. In addition, the .dwg files are available at www.lumileds.com.
Figure 2. Pad configuration.
Figure 3. Solder pad layout.
3
12
TOP
3
21
BOTTOM 3THERMAL
2ANODE
1CATHODE
PADFUNCTION
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 11
Wavelength Characteristics
Cool-White at Test Current
Thermal Pad Temperature = 25°C
Neutral-White at Test Current
Thermal Pad Temperature = 25ºC
0.8
1
D
istribution
02
0.4
0.6
0.8
1
v
e Spectral Power Distribution
0
0.2
0.4
0.6
0.8
1
350 400 450 500 550 600 650 700 750 800
Wavelength (nm)
Relative Spectral Power Distribution
0
0.2
0.4
0.6
0.8
1
350 400 450 500 550 600 650 700 750 800
Wavelength (nm)
Relative Spectral Power Distribution
Figure 4a. Cool-white color spectrum of typical CCT part, integrated measurement
0.8
1
D
istribution
0.2
0.4
0.6
0.8
1
v
e Spectral Power Distribution
0
0.2
0.4
0.6
0.8
1
350 400 450 500 550 600 650 700 750 800
Wavelength (nm)
Relative Spectral Power Distribution
0
0.2
0.4
0.6
0.8
1
350 400 450 500 550 600 650 700 750 800
Wavelength (nm)
Relative Spectral Power Distribution
Figure 4b. Neutral-white color spectrum of typical CCT part, integrated measurement.
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 12
Typical Light Output Characteristics over Temperature
Cool-White and Neutral-White at Test Current
1.2
1
0.8
inous Flux
0.6
Relative Lu
Neutral-White
0.4 Cool-White
0.2
0
-20 0 20 40 60 80 100 120 140
Thermal Pad Temperature °C
Figure 5. Relative luminous flux vs. thermal pad temperature.
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 13
Typical Forward Current Characteristics
Cool-White and Neutral-White
Thermal Pad Temperature = 25ºC
400
600
800
1000
1200
Forward Current mA
0
200
2.6 2.7 2.8 2.9 3 3.1 3.2 3.3 3.4 3.5 3.6
Forward Voltage V
Figure 6. Forward current vs. forward voltage.
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 14
Typical Relative Luminous Flux
Typical Relative Luminous Flux vs. Forward Current for Cool-White and
Neutral-White Thermal Pad Temperature = 25°C
0.00
0.25
0.50
0.75
1.00
1.25
1.50
1.75
2.00
2.25
2.50
Forward Current (mA)
Normalized Luminous Flux
0 200 400 600 800 1000 1200
Figure 7. Relative luminous flux or radiometric power vs. forward current for cool-white and
neutral-white, Thermal Pad = 25ºC maintained.
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 15
Current Derating Curves
Current Derating Curve for 350 mA Drive Current
Cool-White and Neutral-White
Current Derating Curve for 700 mA Drive Current
Cool-White and Neutral-White
1. Current derating curves represent constant current operation condition.
300
350
400
(mA)
100
150
200
250
300
350
400
- Forward Current (mA)
15°C/W
25°C/W
35°C/W
45
°
C/W
0
50
100
150
200
250
300
350
400
0 25 50 75 100 125 150 175
IF- Forward Current (mA)
TA- Ambient Temperature (°C)
15°C/W
25°C/W
35°C/W
45°C/W
0
50
100
150
200
250
300
350
400
0 25 50 75 100 125 150 175
IF- Forward Current (mA)
TA- Ambient Temperature (°C)
15°C/W
25°C/W
35°C/W
45°C/W
Figure 8. Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC.
700
800
400
500
600
700
800
r
ward Current (mA)
15°C/W
25
°
C/W
0
100
200
300
400
500
600
700
800
IF- Forward Current (mA)
15°C/W
25°C/W
35°C/W
0
100
200
300
400
500
600
700
800
0 25 50 75 100 125 150 175
IF- Forward Current (mA)
TA- Ambient Temperature (°C)
15°C/W
25°C/W
35°C/W
Figure 9. Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC.
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 16
Current Derating Curve for 1000 mA Drive Current
Cool-White and Neutral-White
1000
1200
A
)
600
800
1000
1200
F
orward Current (mA)
15
°
C/W
0
200
400
600
800
1000
1200
IF- Forward Current (mA)
15°C/W
25°C/W
0
200
400
600
800
1000
1200
0 25 50 75 100 125 150 175
IF- Forward Current (mA)
TA- Ambient Temperature (°C)
15°C/W
25°C/W
Figure 10. Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC.
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 17
Typical Radiation Patterns
Typical Spatial Radiation Pattern for Cool-White and
Neutral-White Lambertian
Typical Polar Radiation Pattern for White Lambertain
Angular Displacement (deg)
Relative Intensity (%)
Figure 11a. Typical representative spatial radiation pattern for cool-white and neutral-white lambertian.
0 20% 40% 60% 80% 100%
30º
60º
90º
- 30º
- 60º
- 90º
Figure 11b. Typical polar radiation pattern for cool-white and neutral-white lambertian.
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 18
Emitter Pocket Tape Packaging
Figure 13. Emitter pocket tape packaging
50
1000
20
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 19
Emitter Reel Packaging
Figure 14. Emitter reel packageing
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 20
Product Binning and Labeling
Purpose of Product Binning
In the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets.
For this reason, Lumileds bins the LED components for luminous flux, color and forward voltage (Vf ).
Decoding Product Bin Labeling
LUXEON Rebel emitters are labeled using a three or four digit alphanumeric code (CAT code) depicting the bin values for emitters packaged on a
single reel. All emitters packaged within a reel are of the same 3-variable bin combination. Using these codes, it is possible to determine optimum
mixing and matching of products for consistency in a given application.
Reels of Cool-White and Neutral-White emitters are labeled with a four digit alphanumeric CAT code following the format below.
ABCD
A = Flux bin (J, K, L, M etc.)
B and C = Color bin (W0, U0, V0 etc.)
D = Vf bin (D, E, F, G etc.)
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 21
Luminous Flux Bins
Table 8 lists the standard photometric luminous flux bins for LUXEON Rebel emitters (tested and binned at 350 mA).
Although several bins are outlined, product availability in a particular bin varies by production run and by product performance.
Not all bins are available in all colors.
Table 8.
Flux Bins
Minimum Photometric Flux Maximum Photometric Flux
Bin Code (lm) (lm)
H 50 60
J 60 70
K 70 80
L 80 90
M 90 100
N 100 110
X 110 120
P 120 130
Y 130 140
Q 140 150
R 150 160
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 22
Cool-White Bin Structure
Figure 15. Cool-White bin structure.
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 23
Cool-White LUXEON Rebel emitters are tested and binned by x,y coordinates. 19 Color Bins, CCT Range 4,500K to 10,000K.
Table 9.
Cool-White Bin Coordinates
Typical CCT Typical CCT
Bin Code X Y (K) Bin Code X Y (K)
0.274238 0.300667 0.318606 0.310201
Y0 0.303051 0.332708 8000 WQ 0.329393 0.320211 6000
0.307553 0.310778 0.329544 0.310495
0.282968 0.283772 0.319597 0.301303
0.282968 0.283772 0.328636 0.368952
YA 0.307553 0.310778 8000 VM 0.348147 0.385629 5300
0.311163 0.293192 0.346904 0.371742
0.289922 0.270316 0.328823 0.356917
0.301093 0.342244 0.328823 0.356917
XM 0.313617 0.354992 6700 VN 0.346904 0.371742 5300
0.314792 0.344438 0.345781 0.359190
0.303051 0.332708 0.329006 0.345092
0.303051 0.332708 0.329006 0.345092
XN 0.314792 0.344438 6700 V0 0.345781 0.359190 5300
0.316042 0.333222 0.344443 0.344232
0.305170 0.322386 0.329220 0.331331
0.305170 0.322386 0.329220 0.331331
X0 0.316042 0.333222 6700 VP 0.344443 0.344232 5300
0.317466 0.320438 0.343352 0.332034
0.307553 0.310778 0.329393 0.320211
0.307553 0.310778 0.348147 0.385629
XP 0.317466 0.320438 6700 UM 0.367294 0.400290 4750
0.319597 0.301303 0.364212 0.382878
0.311163 0.293192 0.346904 0.371742
0.313617 0.354992 0.346904 0.371742
WM 0.328636 0.368952 6000 UN 0.364212 0.382878 4750
0.328823 0.356917 0.362219 0.371616
0.314792 0.344438 0.345781 0.359190
0.314792 0.344438 0.345781 0.359190
WN 0.328823 0.356917 6000 U0 0.362219 0.371616 4750
0.329006 0.345092 0.359401 0.355699
0.316042 0.333222 0.344443 0.344232
0.316042 0.333222 0.344443 0.344232
W0 0.329006 0.345092 6000 UP 0.359401 0.355699 4750
0.329220 0.331331 0.357079 0.342581
0.317466 0.320438 0.343352 0.332034
0.317466 0.320438
WP 0.329220 0.331331 6000
0.329393 0.320211
0.318606 0.310201
Note for Table 9:
- Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates.
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 24
Neutral-White Bin Structure
Neutral-White LUXEON Rebel emitters are tested and binned by x,y coordinates. 12 Color Bins, CCT Range 3,500K to 4,500K.
Table 10.
Neutral-White Bin Coordinates
Typical CCT Typical CCT
Bin Code X Y (K) Bin Code X Y (K)
0.367294 0.400290 0.378264 0.382458
TM 0.385953 0.412995 4300 S0 0.392368 0.390932 3950
0.381106 0.393747 0.387071 0.373899
0.364212 0.382878 0.374075 0.365822
0.364212 0.382878 0.374075 0.365822
TN 0.381106 0.393747 4300 SP 0.387071 0.373899 3950
0.378264 0.382458 0.382598 0.359515
0.362219 0.371616 0.370582 0.351953
0.362219 0.371616 0.402270 0.422776
T0 0.378264 0.382458 4300 RM 0.420940 0.432618 3650
0.374075 0.365822 0.414776 0.416097
0.359401 0.355699 0.396279 0.403508
0.359401 0.355699 0.396279 0.403508
TP 0.374075 0.365822 4300 RN 0.414776 0.416097 3650
0.370582 0.351953 0.408593 0.399525
0.357079 0.342581 0.392368 0.390932
0.385953 0.412995 0.392368 0.390932
SM 0.402270 0.422776 3950 R0 0.408593 0.399525 3650
0.396279 0.403508 0.402113 0.382156
0.381106 0.393747 0.387071 0.373899
0.381106 0.393747 0.387071 0.373899
SN 0.396279 0.403508 3950 RP 0.402113 0.382156 3650
0.392368 0.390932 0.396564 0.367284
0.378264 0.382458 0.382598 0.359515
Note for Table 10:
- Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates.
Figure 16. Neutral-White bin structure.
DS64 LUXEON Rebel General Purpose Product Datasheet 20160427 ©2016 Lumileds Holding B.V. All rights reserved. 25
Forward Voltage Bins
Table 11 lists minimum and maximum Vf bin values per emitter. Although several bins are outlined, product availability in a particular bin varies by
production run and by product performance.
Table 11.
Vf Bins
Minimum Forward Voltage Maximum Forward Voltage
Bin Code (V) (V)
B 2.55 2.79
C 2.79 3.03
D 3.03 3.27
E 3.27 3.51
F 3.51 3.75
G 3.75 3.99
DS64 LUXEON Rebel General Purpose
Product Datasheet 20160427
©2016 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds Holding B.V.
in the United States and other countries.
lumileds.com
Lumileds Holding B.V. shall not be liable for any kind of loss of data or any other damages, direct,
indirect or consequential, resulting from the use of the provided information and data. Although
Lumileds Holding B.V. has attempted to provide the most accurate information and data, the
materials and services information and data are provided “as is” and Lumileds Holding B.V.
neither warranties, nor guarantees the contents and correctness of the provided information
and data. Lumileds Holding B.V. reserves the right to make changes without notice. You as user
agree to this disclaimer and user agreement with the download or use of the provided materials,
information and data.
About Lumileds
Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking
LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge.
With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by
maintaining an unwavering focus on quality, innovation and reliability.
To learn more about our portfolio of light engines, visit lumileds.com.

Products

LED LUXEON COOL WHITE 70CRI 3SMD
Cantidad disponible39742
Precio por unidad2.77
LED LUXEON NEUTRAL WHITE 3SMD
Cantidad disponible8271
Precio por unidad2.77
LED LUXEON COOL WHITE 70CRI 3SMD
Cantidad disponible12003
Precio por unidad2.74
LED LUXEON NEUTRAL WHITE 3SMD
Cantidad disponible2361
Precio por unidad2.74