Model No. Applicable wire
Insulation O.D. (mm)
This low profile type connector with height
of 3.0mm is designed for connection to
stroboscope flash and realized space
• Contact lance
• Countermeasure for inverse insertion and
• Current rating: 4A AC, DC (AWG #22)
• Voltage rating: 350V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
• Contact resistance: Initial value/ 10m Ωmax.
After environmental testing/ 20m Ωmax.
• Insulation resistance: 1,000M Ωmin.
• Withstanding voltage: 1,700V AC/minute
• Applicable wire: Conductor size/ AWG #30 to #22
Insulation O.D./ 0.7 to 1.3mm
*Compliant with RoHS.
*Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Note: 1. The above figure is the figure viewed from the connector mounting side.
2. Tolerances are non-cumulative:
0.05mm for all centers.
3. The dimensions above should serve as a guideline. Contact JST for details.