Ceramic Cap Catalog

Johanson Dielectrics Inc.

View All Related Products | Download PDF Datasheet

Datasheet

RoHS/REACH
Compliance
AC Safety Certified
High Voltage SMT
High Capacitance
High Temperature
EMI Filters (X2Y®)
LICC Low ESL
SMPS Stacks
High Voltage Radials
Precision Power Resistors
Power Inductors
Planar Array
Discoidal
CapStrate®
Custom Solutions
Ceramic
Component Solutions
2
www.johansondielectrics.com
The mission of the Johanson Companies is to
translate our customer needs into quality electronic
components, produced in factories that are models
of excellence, supported by innovative service. With
over 30 years of experience, Johanson Dielectrics
provides both standard and custom technology solu-
tions tailored to your specific electronic applications.
Our standard product range includes High Voltage
and AC Safety Capacitors providing solutions for
Lighting, IT and Business Equipment designs. Our
X2Y® Capacitor line provides advanced EMI fil-
tering and IC decoupling solutions and our High
Capacitance Tanceram® products provide the highest
capacitance values in the smallest cases sizes.
Customized solutions in the areas of High Tem-
perature and High AC power ceramic capacitors are
available to customers who require a partnered tech-
nology solution.
Johanson Dielectrics design and manufacturing
operations are located in Sylmar, California and
Zhoaqing, PRC. Our quality minded management
system utilizes continuous improvement programs
focused on increased product reliability, manufac-
turing through-put, and product performance. Our
broad experience, applications support, and respon-
sive service enhance our ability to drive down your
total cost of procurement and speed your time to
market.
Johanson Dielectrics, Inc. reserves the right to make design and price changes without notice. All sales
are subject to the Johanson terms and conditions, including a limited warranty and remedies for non-
conforming goods or defective goods. Download the Johanson terms and conditions from our website
at https://www.johansondielectrics.com/terms-and-conditions.
HIGH FREQUENCY CERAMIC SOLUTIONS
Johanson Technology Inc., Camarillo CA. Products
include High Q Capacitors, Ceramic and Wire-
wound Chip Inductors, and a broad range of LTCC
based RF IPCs such as Antennas, Filters, Baluns,
Couplers, Matched Filter Baluns, etc.
www.johansontechnology.com
YOUR TECHNOLOGY PARTNER
3
www.johansondielectrics.com
INDEX OF PRODUCTS
SURFACE MOUNT CERAMIC CAPACITORS
Ceramic Capacitor Prototyping Kits 4-5
High Voltage Capacitors 250 - 6,000 VDC 6-7
Safety Capacitors 250 VAC, Y2, X1, X2 8-9
EMI - X2Y® Filter & Decoupling Capacitors 10-13
Low Inductance Capacitors 14
Chip Feedthru Filter Capacitors 15
High Temperature 200°C Capacitors 16-17
High Capacitance Tanceram® Capacitors 18-19
SMT Multi-layer Ceramic Capacitors 10 - 200 VDC 20-21
LEADED CERAMIC CAPACITORS
SMPS Stacked Capacitors, 125°C & 200°C versions 22-23
Mini-SMPS Stacked Capacitors 24-25
BME Mini SMPS Capacitors 26-27
Switch-mode Radial Leaded Capacitors 28-29
High Voltage Radial Leaded Capacitors, 125°C, 200°C versions 30-31
PRECISION POWER RESISTORS
Resistor Wirewound Precision 32-33
Resistor Wirewound Precision SMT 34-35
Resistor Wirewound High Power Rating 36-39
Resistor Wirewound Chassis Mount 40-42
Resistor Thin Film Precision 43-46
Resistor Metal Element Current Sense SMT 47-49
Resistor High Power Low Inductance 50-53
Resistor Thick Film, High Temperature 54-56
Resistor Metal Element Current Sense 57-58
Resistor Power Thin Film 59-61
Precision Current Resistor 62-65
POWER INDUCTORS
Semi-shielded (Coated) & Shielded 66-73
Shielded LPM Series 74-78
PLANAR CAPACITORS & CUSTOM CERAMIC SOLUTIONS
Planar Array Capacitors 79-80
CAPSTRATE & CUSTOMER CERAMIC SOLUTIONS
CapStrate® & Customer Ceramic Solutions 81-82
PART NUMBER, DIELECTRIC, PACKAGING SPECIFICATIONS
Capacitor General Electrical Characteristics and PN breakdown 83
4
www.johansondielectrics.com
Johanson may from time-time adjust actual kit contents based on design demand trends.
Check the Johanson web site for design kit updates and kit content changes.
CERAMIC CAPACITOR ENGINEERING DESIGN KITS
Johanson Dielectrics, Inc. offers a variety of multi-layer chip capacitor
sample kits for proto-type design work. Each kit is grouped by type,
size, or voltage and contains a selection of popular values and
tolerances. The chips are individually packaged in labeled plastic
compartments for easy access. The general range of kit contents
is described below. Specific part number details may be found at
www.johansondielectrics.com
0402 Ceramic Chip Capacitor Kit P/N: S-0402
1400 piece sample assortment of selected values from 1.0pF to 0.22µF
Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value Total Qty
0402 50 VDC - 6.3 VDC NP0, X7R 1.0pF to 0.22µF 50 pcs 1400 pcs
0603 Ceramic Chip Capacitor Kit P/N: S-0603
1400 piece sample assortment of selected values from 1.0pF to 0.22µF
Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value Total Qty
0603 50 VDC - 16 VDC NP0, X7R 10pF to 0.22µF 50 pcs 1400 pcs
0805 Ceramic Chip Capacitor Kit P/N: S-0805
1400 piece sample assortment of selected values from 1.0pF to 0.47µF
Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value Total Qty
0805 100 VDC - 16 VDC NP0, X7R 10pF to 0.47µF 50 pcs 1400 pcs
500 VDC Ceramic Chip Capacitor Kit P/N: S-500
400 piece sample assortment of selected values from 33pF to 0.1µF
Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value Total Qty
0805 - 1812 500 VDC NP0, X7R 33pF to 0.1µF 10-20 pcs 400 pcs
1000 VDC Ceramic Chip Capacitor Kit P/N: S-1KV
400 piece sample assortment of selected values from 22pF to 0.1µF
Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value Total Qty
0805 - 2225 1000 VDC NP0, X7R 22pF to 0.1µF 10-20 pcs 400 pcs
5
www.johansondielectrics.com
CERAMIC CAPACITOR ENGINEERING DESIGN KITS
2000 VDC Ceramic Chip Capacitor Kit P/N: S-2KV
300 piece sample assortment of selected values from 22pF to 0.022µF
Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value Total Qty
1206 - 2225 2000 VDC NP0, X7R 22pF to 0.022µF 10-20 pcs 300 pcs
X2 SAFETY CERTIFIED Ceramic Chip Capacitor Kit P/N: S-SY3
240 piece sample assortment of selected values from 10pF to 1500 pF
Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value Total Qty
1808 3KV DC / 250 AC NP0, X7R 10pF to 1500 pF 20 pcs 240 pcs
X1/Y2 SAFETY CERTIFIED Ceramic Chip Capacitor Kit P/N: S-SY2
200 piece sample assortment of selected values from 10pF to 2200 pF
Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value Total Qty
1808 - 2220 5KV DC / 250 VAC NP0, X7R 10pF to 2200pF 20 pcs 200 pcs
X2Y® EMI FILTER Capacitor Kit - 0402 Size P/N: S-X07CBK
600 piece sample assortment of selected values from 1.0pF to 0.01µF
Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value Total Qty
0402 10 - 50 VDC NP0, X7R 1.0pF to 0.01µF 50 pcs 600 pcs
X2Y® EMI FILTER Capacitor Kit - 0603 Size P/N: S-X14CBK
700 piece sample assortment of selected values from 1.0pF to 0.01µF
Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value Total Qty
0603 50 - 100 VDC NP0, X7R 1.0pF to 0.01µF 50 pcs 700 pcs
X2Y® EMI FILTER Capacitor Kit - 0805 Size P/N: S-X15-EMI
300 piece sample assortment of selected values from 1.0pF to 0.01µF
Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value Total Qty
0805 50 - 100 VDC NP0, X7R 1.0pF to 0.01µF 20 pcs 300 pcs
X2Y® POWER BYPASS Capacitor Kit - 0603 Size P/N: S-X14-PBP
300 piece sample assortment of selected values from 1.0nF to 1.0µF
Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value Total Qty
0603 6.3 - 100 VDC X7R, X5R 1.0nF to 1.0µF 20 pcs 300 pcs
X2Y® AUTOMOTIVE QUALIFIED capacitor kit P/N: S-X2Y-AEC
420 piece sample assortment of selected values from 100pF to 0.22µF
Chip Size Voltage Rating Dielectric Capacitance Range Qty / Value Total Qty
0603, 0805, 1206 10 - 100 VDC X7R 100pF to 0.22µF 30 pcs 420 pcs
Johanson may from time-time adjust actual kit contents based on design demand trends.
Check the Johanson web site for design kit updates and kit content changes.
6
www.johansondielectrics.com
CASE SIZE CAPACITANCE SELECTION
JDI /EIA
RATED
VOLTAGE
NP0 DIELECTRIC X7R DIELECTRIC
INCHES (MM) MINIMUM MAXIMUM MINIMUM MAXIMUM
R15/0805 L
W
T
E/B
.080 ±.010
.050 ±.010
.055 Max.
.020 ±.010
(2.03 ±.25)
(1.27 ±.25)
(1.40)
(0.51±.25)
250 VDC
- - 1000 pF 0.022 µF
500 VDC
10 pF 680 pF 1000 pF 0.010 µF
630 VDC
10 pF 560 pF 1000 pF 6800 pF
1000 VDC
10 pF 390 pF 100 pF 2700 pF
R18/1206 L
W
T
E/B
.125 ±.010
.062 ±.010
.067 Max.
.020 ±.010
(3.18 ±.25)
(1.57 ±.25)
(1.70)
(0.51±.25)
250 VDC
- - 1000 pF 0.068 µF
500 VDC
10 pF 1500 pF 1000 pF 0.033 µF
630 VDC
10 pF 1200 pF 1000 pF 0.027 µF
1000 VDC
10 pF 1000 pF 100 pF 0.010 µF
2000 VDC
10 pF 220 pF 100 pF 4700 pF
3000 VDC
10 pF 82 pF 100 pF 1000 pF
S41/1210 L
W
T
E/B
.125 ±.010
.095 ±.010
.080 Max.
.020 ±.010
(3.18 ±.25)
(2.41 ±.25)
(2.03)
(0.51±.25)
250 VDC
- - 1000 pF 0.150 µF
500 VDC
10 pF 3900 pF 1000 pF 0.068 µF
630 VDC
10 pF 2700 pF 1000 pF 0.047 µF
1000 VDC
10 pF 1800 pF 100 pF 0.015 µF
2000 VDC
10 pF 560 pF 100 pF 4700 pF
3000 VDC
10 pF 220 pF 100 pF 1000 pF
R29/1808
L
W
T
E/B
.185 ±.020
.080 ±.010
.085 Max.
.020 ±.010
(4.70 ±.51)
(2.03 ±.25)
(2.16)
(0.51±.25)
500 VDC
10 pF 4700 pF 1000 pF 0.100 µF
630 VDC
10 pF 3300 pF 1000 pF 0.047 µF
1000 VDC
1.0 pF 2200 pF 100 pF 0.022 µF
2000 VDC
1.0 pF 820 pF 100 pF 0.010 µF
3000 VDC
1.0 pF 470 pF 100 pF 3300 pF
4000 VDC
1.0 pF 180 pF 100 pF 1800 pF
5000 VDC
1.0 pF 75 pF 47 pF 390 pF
6000 VDC
1.0 pF 75 pF 47 pF 150 pF
Available cap. values include these significant retma values and their multiples: 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2
( 1.0 = 1.0, 10, 100, 1000, etc.) Consult factory for non-retma values and sizes or voltages not shown.
HIGH VOLTAGE SURFACE MOUNT MLCCS 250 - 6,000 VDC
These high voltage capacitors feature a special internal electrode
design which reduces voltage concentrations by distributing
voltage gradients throughout the entire capacitor.
This unique design also affords increased capacitance values in
a given case size and voltage rating. The capacitors are designed
and manufactured to the general requirement of EIA198 and
are subjected to a 100% electrical testing making them well
suited for a wide variety of telecommunication, commercial, and
industrial applications.
APPLICATIONS
• Analog & Digital Modems • LAN/WAN Interface
• Lighting Ballast Circuits • Voltage Multipliers
• DC-DC Converters • Back-lighting Inverters
Polyterm
®
soft termination option for demanding environments &
processes available on select parts, please contact the factory.
7
www.johansondielectrics.com
CASE SIZE CAPACITANCE SELECTION
JDI /EIA RATED
VOLTAGE
NP0 DIELECTRIC X7R DIELECTRIC
INCHES (MM) MINIMUM MAXIMUM MINIMUM MAXIMUM
S43 / 1812
L
W
T
E/B
.177 ±.012
.125 ±.010
.110 Ma x.
.025 ±.015
(4.50 ±.30)
(3.18 ±.25)
(2.80)
(0.64±.38)
250 VDC
- - 0.010 µF 0.470 uF
500 VDC
100 pF 8200 pF 1000 pF 0.330 uF
630 VDC
100 pF 6800 pF 1000 pF 0.120 µF
1000 VDC
10 pF 5600 pF 1000 pF 0.100 µF
2000 VDC
10 pF 1800 pF 100 pF 0.010 µF
3000 VDC
10 pF 1000 pF 100 pF 4700 pF
4000 VDC
10 pF 390 pF 100 pF 1200 pF
5000 VDC
10 pF 150 pF 100 pF 820 pF
6000 VDC
10 pF 150 pF 10 pF 330 pF
S49 / 1825
L
W
T
E/B
.180 ±.010
.250 ±.010
.14 0 M a x.
.025 ±.015
(4.57 ±.25)
(6.35 ±.25)
(3.56)
(0.64±.38)
500 VDC
100 pF 0.018 µF 0.01 µF 0.390 µF
630 VDC
100 pF 0.015 µF 0.01 µF 0.270 µF
1000 VDC
10 pF 0.012 µF 1000 pF 0.180 µF
2000 VDC
10 pF 5600 pF 100 pF 0.039 µF
3000 VDC
10 pF 2200 pF 100 pF 8200 pF
4000 VDC
10 pF 1200 pF 100 pF 2200 pF
5000 VDC
10 pF 390 pF 100 pF 1500 pF
6000 VDC
10 pF 390 pF 100 pF 820 pF
S47 / 2220
L
W
T
E/B
.225 ±.015
.200 ±.015
.150 Ma x.
.025 ±.015
(5.72 ±.38)
(5.08 ±.38)
(3.81)
(0.64±.38)
500 VDC
1000 pF 0.018 µF 0.01 µF 0.470 µF
630 VDC
1000 pF 0.018 µF 0.01 µF 0.270 µF
1000 VDC
100 pF 0.015 µF 1000 pF 0.120 µF
2000 VDC
100 pF 5600 pF 1000 pF 0.039 µF
3000 VDC
10 pF 2700 pF 100 pF 0.010 µF
4000 VDC
10 pF 1500 pF 100 pF 2700 pF
5000 VDC
10 pF 470 pF 100 pF 1500 pF
6000 VDC
10 pF 470 pF 100 pF 820 pF
S48 / 2225
L
W
T
E/B
.225 ±.010
.255 ±.015
.160 M a x .
.025 ±.015
(5.72 ±.25)
(6.48 ±.38)
(4.06)
(0.64±.38)
500 VDC
1000 pF 0.027 µF 0.01 µF 0.560 µF
630 VDC
1000 pF 0.022 µF 0.01 µF 0.390 µF
1000 VDC
100 pF 0.018 µF 1000 pF 0.180 µF
2000 VDC
100 pF 8200 pF 1000 pF 0.056 µF
3000 VDC
10 pF 3300 pF 100 pF 0.012 µF
4000 VDC
10 pF 1800 pF 100 pF 3300 pF
5000 VDC
10 pF 470 pF 100 pF 2700 pF
6000 VDC
10 pF 470 pF 100 pF 1200 pF
Available cap. values include these significant retma values and their multiples: 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2
( 1.0 = 1.0, 10, 100, 1000, etc.) Consult factory for non-retma values and sizes or voltages not shown.
ELECTRICAL CHARACTERISTICS
Meets the standard NP0 & X7R dielectric specifications listed on page 79
DIELECTRIC WITHSTANDING VOLTAGE
DWV = 1.5 X rated WVDC for ratings 500-999 WVDC,
DWV = 1.2 X rated WVDC for ratings ≥ 1,000 WVDC
NOTE: Capacitors may require a surface coating to prevent external arcing. Solder mask should not be used beneath
capacitors. For more information see JDI Tech Note “Surface Arc Season”
HIGH VOLTAGE SURFACE MOUNT MLCCS 250 - 6,000 VDC
L
W
TE/B
HOW TO ORDER HIGH VOLTAGE SURFACE MOUNT
P/N written: 202R18W102KV4E
202 R18 W 102 K V 4 E
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
501 = 500 V
631 = 630 V
102 = 1000 V
202 = 2000 V
302 = 3000 V
402 = 4000 V
502 = 5000 V
602 = 6000 V
R15 = 0805
R18 = 1206
R29 = 1808
S41 = 1210
S43 = 1812
S47 = 2220
S48 = 2225
S49 = 1825
N = NP0
W = X7R
1st two digits are signifi-
cant; third digit denotes
number of zeros.
102 = 1000 pF
104 = 0.10 µF
J = ± 5%
K = ± 10%
M = ± 20%
V = NI Barrier with 100%
Sn Plating (Matte)
F = Polyterm
flexible termination
T = SnPb
4 = Unmarked
6 = EIA Code
E = Embossed 7”
T = Punched 7”
No code = bulk
Tape specs.
per EIA RS481
8
www.johansondielectrics.com
AC SAFETY CAPACITORS
Johanson Dielectrics Type SC ceramic chip capacitors are
designed for AC voltage surge and lightning protection in line-
to-ground interface applications in computer networks, modem,
facsimile and other equipment.
Johanson’s safety capacitor offering includes four different case
sizes in NP0 and X7R dielectric materials.
These devices are surface mount ready with barrier terminations
and tape and reel packaging.
Information on capacitor safety ratings and certification details
may be found below.
L
W
T
E/B
Polyterm
®
soft termination
option for demanding
environments & processes
available on select parts,
please contact the factory.
SAFETY
RATING
VOLTAGE
RATING
WITHSTANDING
VOLTAGE
IMPULSE
VOLTAGE
CASE
SIZE
JOHANSON
ORDERING P/N
X2 250 VAC 1,500 VAC 2,500 V 1808 302R29______V3E-****-SC
STANDARDS: IEC/EN 60384-14:2013 EN 60950 2006 • UL 60384-14, UL 60950-01 CERTIFICATIONS: TUV R 50227900 & T 72140662UL File E472557 & E212609
X2 250 VAC 1,500 VAC 2,500 V 1812 302S43______V3E-****-SC
STANDARDS: IEC/EN 60384-14:2013 EN 60950 2006 • UL 60384-14, UL 60950-01 CERTIFICATIONS: TUV R 50227900 & T 72140662UL File E472557 & E212609
X1/Y2 250 VAC 1,500 VAC 5,000 V 1808 502R29______V3E-****-SC
STANDARDS: IEC/EN 60384-14:2013 EN 60950 2006 • UL 60384-14, UL 60950-01 CERTIFICATIONS: TUV R 50227900 & T 72140662UL File E472557 & E212609
X1/Y2 250 VAC 1,500 VAC 2,500 V 1812 502S43______V3E-****-SC
STANDARDS: IEC/EN 60384-14:2013 EN 60950 2006 • UL 60384-14, UL 60950-01 CERTIFICATIONS: TUV R 50227900 & T 72140662UL File E472557 & E212609
X1/Y2 250 VAC 1,500 VAC 5,000 V 2211 502R30______V3E-****-SC
STANDARDS: IEC/EN 60384-14:2013 EN 60950 2006 • UL 60384-14, UL 60950-01 CERTIFICATIONS: TUV R 50227900 & T 72140662UL File E472557 & E212609
X1/Y2 250 VAC 1,500 VAC 5,000 V 2220 502S47______V3E-****-SC
STANDARDS: IEC/EN 60384-14:2013 EN 60950 2006 • UL 60384-14, UL 60950-01 CERTIFICATIONS: TUV R 50227900 & T 72140662UL File E472557 & E212609
X Capacitors are defined as suitable for use in situations where failure of the capacitor would not lead to danger of electric shock.
Y Capacitors are defined as suitable for use in situations where failure of the capacitor could lead to danger of electric shock.
9
www.johansondielectrics.com
HOW TO ORDER AC SAFETY CAPACITORS
P/N written: 302R29W102MV3E-****-SC
502 R29 W 102 M V 3 E -****-SC
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
TYPE
302 = 250VAC
[2500V Impulse]
502 = 250VAC
[5000V Impulse]
R29=1808
R30=2211
S43=1812
S47=2220
AC2=2220
N = NP0
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros, R = decimal.
102 = 1000 pF
104 = 0.10 µF
5R0 = 5.0pF
J = ± 5%
K = ± 10%
M = ± 20%
V = NI Barrier with
100% Sn Plating
(Matte)
F = Polyterm
flexible termination
3 = Required
Safety Mark
E = Embossed 7”
U = Embossed 13”
No code = bulk
Tape specs.
per EIA RS481
SC = Safety
Certified
AC SAFETY CAPACITORS
R29 / 1808
X2
L
W
T
E/B
L
W
T
E/B
S43 / 1812
X2
L
W
T
E/B
R29 / 1808
X1/Y2
L
W
T
E/B
S43 / 1812
X1/Y2
L
W
T
E/B
R30 / 2211
X1/Y2
DIELECTRIC
NP0
X7R
SAFETY CERTIFIED
5 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
47 pF
56 pF
68 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
470 pF
560 pF
680 pF
1000 pF
1200 pF
1500 pF
1800 pF
2200 pF
2700 pF
3300 pF
4700 pF
INCHES (MM)
.185 ±.015
.080 ±.010
.085 Max.
.020 ±.010
(4.70 ±.38)
(2.03 ±.25)
(2.16)
(0.51±.25)
.175 ±.010
.125 ±.010
.115 M a x.
.025 ±.015
(4.45 ±.25)
(3.18 ±.25)
(2.92)
(0.64±.38)
.185 ±.015
.080 ±.015
.085 Max.
.020 ±.010
(4.70 ±.38)
(2.03 ±.38)
(2.16)
(0.51±.25)
.175 ±.010
.125 ±.010
.115 M a x.
.025 ±.015
(4.45 ±.25)
(3.18 ±.25)
(2.92)
(0.64±.38)
.225 ±.016
.110 ±.010
.115 M a x.
.020 ±.010
5.72 ±.40)
(2.80 ±.25)
(2.92)
(0.51±.25)
.225 ±.015
.200 ±.015
.150 Ma x.
.025 ±.015
(5.72 ±.38)
(5.08 ±.38)
(3.81)
(0.64±.38)
S47 / 2220
X1/Y2
L
W
T
E/B
10
www.johansondielectrics.com
X2Y
®
FILTER & DECOUPLING CAPACITORS
X2Y
®
filter capacitors employ a unique, patented low inductance design featuring two balanced capacitors
that are immune to temperature, voltage and aging performance differences.
These components offer superior decoupling and EMI filtering performance, virtually eliminate parasitics, and
can replace multiple capacitors and inductors saving board space and reducing assembly costs.
ADVANTAGES
• One device for EMI suppression or decoupling
• Replace up to 7 components with one X2Y
• Differential and common mode attenuation
• Matched capacitance line to ground, both lines
• Low inductance due to cancellation effect
APPLICATIONS
• Amplifier Filter & Decoupling
• High Speed Data Filtering
• EMC I/O Filtering
• FPGA / ASIC / µ-P Decoupling
• DDR Memory Decoupling
X2Y® technology patents and registered trademark under license from X2Y ATTENUATORS, LLC
EMI Filtering
(1 Y-Cap.)
<10pF
10pF
22pF
27pF
33pF
47pF
100pF
220pF
470pF
1000pF
1500pF
2200pF
4700pF
.010µF
.015µF
.022µF
.039µF
.047µF
0.10µF
0.18µF
0.22µF
0.33µF
0.40µF
0.47µF
1.0µF
Power Bypass
(2 Y-Caps.)
<20pF
20pF
44pF
54pF
66pF
94pF
200pF
440pF
940pF
2000pF
3000pF
4400pF
9400pF
.020µF
.030µF
.044µF
.078µF
.094µF
0.20µF
0.36µF
0.44µF
0.66µF
0.80µF
0.94µF
2.0µF
SIZE
CAP.
CODE
XRX
100
220
270
330
470
101
221
471
102
152
222
472
103
153
223
393
473
104
184
224
334
404
474
105
0402 (X07)
NP0
50 50 50 50 50 50 50
X7R
50 50 50 50 50 50 16
0603 (X14)
NP0
100 100 100 100 100 100 50 50
X7R
100 100 100 100 100 100 100 100 50 25 25 16 10 10
0805 (X15)
NP0
100 100 100 100 100 100 100 50
X7R
100 100 100 100 100 100 100 100 50 50 50 25
1206 (X18
NP0 VOLTAGE
RATINGS
6.3 = 6.3 VDC
10 = 10 VDC
16 = 16 VDC
25 = 25 VDC
50 = 50 VDC
100 = 100 VDC
500 = 500 VDC
100
X7R
100 100 100 100 100 16 16 10
1210 (X41)
X7R
500 100 100 100 25 16
1410 (X44)
X7R
500 100
1812 (X43)
X7R
500 100
Contact factory for part combinations not shown.
Filtering capacitance is specified as Line-to-Ground ( Terminal A or B to G)
Power Bypass capacitance is specified Power-to-Ground (A + B to G)
Rated voltage is from line to ground in Circuit 1, power to ground in Circuit 2 .
HOW TO ORDER X2Y® CAPACITORS
P/N written: 101X14W102MV4T
100 X14 W 102 M V 4 T
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING QUALIFICATION
6R3 = 6.3 V
100 = 10 V
160 = 16 V
250 = 25 V
500 = 50 V
101 = 100 V
501 = 500 V
X07 = 0402
X14 = 0603
X15 = 0805
X18 = 1206
X41 = 1210
X44 = 1410
X43 = 1812
N = NP0
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros, R = decimal.
102 = 1000 pF
104 = 0.10 µF
5R6 = 5.6pF
M = ± 20%
* D = ± 0.50 pF
*Values < 10 pF
only
V = NI Barrier with
100% Tin Plating
(Matte)
F = Polyterm
flexible termination
T = SnPb
4 = Unmarked
(Not available)
E = Embossed 7”
T = Punched 7”
No code = bulk
Tape specs.
per EIA RS481
AEC-Q200
Qualification *
(optional)
+AQ
11
www.johansondielectrics.com
Dimensional ViewCross-sectional View
G
G
A
B
EB
CB
L
W
T
EB
CB
L
W
T
X2Y
®
FILTER & DECOUPLING CAPACITORS
CASE SIZE
0402 (X07) 0603 (X14) 0805 (X15) 1206 (X18) 1210 (X41) 1410 (X44) 1812 (X43)
IN MM IN MM IN MM IN MM IN MM IN MM IN MM
L
0.045 ±
0.003
1.14 3 ±
0.076
0.064 ±
0.005
1.626 ±
0.127
0.080 ±
0.008
2.032 ±
0.203
0.124 ±
0.010
3.150 ±
0.254
0.125 ±
0.010
3.175 ±
0.254
0.140 ±
0.010
3.556 ±
0.254
0.174 ±
0.010
4.420 ±
0.254
W
0.025 ±
0.003
0.635 ±
0.076
0.035 ±
0.005
0.889 ±
0.127
0.050 ±
0.008
1.270 ±
0.203
0.063 ±
0.010
1.600 ±
0.254
0.098 ±
0.010
2.489 ±
0.254
0.098 ±
0.010
2.490 ±
0.254
0.125 ±
0.010
3.175 ±
0.254
T
0.020
max
0.508
max
0.026
max
0.660
max
0.040
max
1.016
max
0.050
max
1.270
max
0.070
max
1.778
max
0.070
max
1.778
max
0.090
max
2.286
max
EB
0.008 ±
0.003
0.203 ±
0.076
0.010 ±
0.006
0.254 ±
0.152
0.012 ±
0.008
0.305 ±
0.203
0.016 ±
0.010
0.406 ±
0.254
0.018 ±
0.010
0.457 ±
0.254
0.018 ±
0.010
0.457 ±
0.254
0.022 ±
0.012
0.559 ±
0.305
CB
0.012 ±
0.003
0.305 ±
0.076
0.018 ±
0.004
0.457 ±
0.102
0.022 ±
0.005
0.559 ±
0.127
0.040 ±
0.005
1.016 ±
0.127
0.045 ±
0.005
1.14 3 ±
0.127
0.045 ±
0.005
1.14 3 ±
0.127
0.045 ±
0.005
1.14 3 ±
0.127
ELECTRICAL
CHARACTERISTICS NP0 X7R
TEMPERATURE COEFFICIENT:
0±30ppm/°C (-55 to +125°C) ±15% (-55 to +125°C)
DIELECTRIC STRENGTH:
Vrated ≤100VDC: DWV = 2.5 X WVDC, 25°C, 50mA max.
Vrated = 500VDC: DWV = 1.5 X WVDC, 25°C, 50mA max.
DISSIPATION FACTOR:
0.1% max.
WVDC ≥ 50 VDC: 2.5% max.
WVDC = 25 VDC: 3.5% max.
WVDC = 10-16 VDC: 5.0% max.
WVDC = 6.3 VDC: 10% max.
INSULATION RESISTANCE
(MIN. @ 25°C, WVDC)
C≤ 0.047µF: 1000 ΩF or 100 GΩ, whichever is less
C> 0.047µF: 500 ΩF or 10 GΩ, whichever is less
TEST CONDITIONS:
C > 100 pF; 1kHz ±50Hz; 1.0±0.2 VRMS
C ≤ 100 pF; 1Mhz ±50kHz; 1.0±0.2 VRMS 1.0kHz±50Hz @ 1.0±0.2 Vrms
OTHER:
See page 79 for additional dielectric specifications.
EMI Filtering Scc21 Power Bypass S21
10.0Ω
1.00Ω
0.10Ω
0.01Ω
Approximate Impedance (Ω)
10.0Ω
1.00Ω
0.10Ω
0.01Ω
Approximate Impedance (Ω)
Labeled capacitance values below follow the P/N order code (single Y cap value)
Effective capacitance measured in Circuit 2 is 2X of the labled single Y cap value.
More data at https://s21plotter.johansondielectrics.com/
12
www.johansondielectrics.com
THE X2Y® DESIGN - A BALANCED, LOW ESL, “CAPACITOR CIRCUIT
The X2Y
®
capacitor design starts with standard 2 terminal MLC capacitor’s opposing electrode sets, A & B, and adds a third electrode set (G) which
surround each A & B electrode. The result is a highly vesatile three node capacitive circuit containing two tightly matched, low inductance capacitors
in a compact, four-terminal SMT chip.
AMPLIFIER INPUT FILTER EXAMPLE
In this example, a single Johanson X2Y
®
component was used to filter noise at the input of a
DC instrumentation amplifier. This reduced component count by 3-to-1 and costs by over 70%
vs. conventional filter components that included 1% film Y-capacitors.
Parameter X2Y®
10nF
Discrete
10nF, 2 @ 220 pF
Comments
DC offset shift < 0.1 µV < 0.1 µV Referred to input
Common mode rejection 91 dB 92 dB
Source: Analog Devices, “A Designer’s Guide to Instrumentation Amplifiers (2nd Edition)” by Charles Kitchin and Lew Counts
EMI FILTERING:
The X2Y
®
component contains two shunt or “line-to-ground” Y capacitors. Ultra-low ESL (equivalent
series inductance) and tightly matched inductance of these capacitors provides unequaled high frequency
Common-Mode noise filtering with low noise mode conversion. X2Y
®
components reduce EMI emissions
far better than unbalanced discrete shunt capacitors or series inductive filters. Differential signal loss is
determined by the cut off frequency of the single line-to-ground (Y) capacitor value of an X2Y
®
.
X2Y
®
FILTER & DECOUPLING CAPACITORS
POWER BYPASS / DECOUPLING
For Power Bypass applications, X2Ys
®
two “Y” capacitors are connected in parallel. This doubles the total
capacitance and reduces their mounted inductance by 80% or 1/5th the mounted inductance of similar sized
MLC capacitors enabling high-performance bypass networks with far fewer components and vias. Low ESL
delivers improved High Frequency performance into the GHz range.
GSM RFI ATTENUATION IN AUDIO & ANALOG
GSM handsets transmit in the 850 and 1850 MHz bands using a TDMA pulse
rate of 217Hz. These signals cause the GSM buzz heard in a wide range of audio
products from headphones to concert hall PA systems or “silent” signal errors
created in medical, industrial process control, and security applications. Testing
was conducted where an 840MHz GSM handset signal was delivered to the
inputs of three different amplifier test circuit configurations shown below whose
outputs were measured on a HF spectrum analyzer.
1) No input filter, 2 discrete MLC 100nF power bypass caps.
2) 2 discrete MLC 1nF input filter, 2 discrete MLC 100nF power bypass caps.
3) A single X2Y 1nF input filter, a single X2Y 100nF power bypass cap.
X2Y configuration provided a nearly flat response above the ambient and up to
10 dB imrpoved rejection than the conventional MLCC configuration.
13
www.johansondielectrics.com
X2Y HIGH PERFORMANCE POWER BYPASS - IMPROVE PERFORMANCE, REDUCE SPACE & VIAS
Actual measured performance of two high performance SerDes FPGA designs demonstrate how a 13 component X2Y bypass network
significantly out performs a 38 component MLC network.
For more information see https://johansondielectrics.com/downloads/JDI_X2Y_STXII.pdf
COMMON MODE CHOKE REPLACEMENT
• Superior High Frequency Emissions Reduction
• Smaller Sizes, Lighter Weight
• No Current Limitation
• Vibration Resistant
• No Saturation Concerns
See our website for a detailed application note with component
test comparisons and circuit emissions measurements.
X2Y
®
FILTER & DECOUPLING CAPACITORS
PARALLEL CAPACITOR SOLUTION
A common design practice is to parallel decade capacitance values to
extend the high frequency performance of the filter network. This causes an
unintended and often over-looked effect of anti-resonant peaks in the filter
networks combined impedance. X2Y’s very low mounted inductance allows
designers to use a single, higher value part and completely avoid the anti-
resonance problem. The impedance graph on right shows the combined
mounted impedance of a 1nF, 10nF & 100nF 0402 MLC in parrallel in RED.
The MLC networks anti-resonance peaks are nearly 10 times the desired
impedance. A 100nF and 47nF X2Y are plotted in BLUE and GREEN. (The
total capacitance of X2Y (Circuit 2) is twice the value, or 200nF and 98nF in this
example.) The sigle X2Y is clearly superior to the three paralleled MLCs.
Measured Common Mode Rejection
14
www.johansondielectrics.com
LOW INDUCTANCE CHIP CAPACITORS (LICC)
LICC capacitors are specially designed to exhibit lower inductance by altering
the aspect ratio of the terminations. The smaller current loop length results in
Equivalent Series Inductance (ESL) that is typically 60% lower then standard MLCs
of the same size. This ESL improvement is extremely advantageous in the high
frequency power decoupling of high speed digital MPU, FPGA, DSP, etc..
FEATURES
• Low Inductance • Surface Mount
• High Series Resonant Frequency • Small Size
• Sn-Pb and Polyterm® Termination Options • RoHS Compliant
WSTD
MLC
L
LLICC
W
HOW TO ORDER LICC CAPACITORS
P/N written: 160B14W104MV4T
160 B14 W 104 M V 4 T
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
6R3 = 6.3 V
100 = 10 V
160 = 16 V
250 = 25 V
500 = 50 V
B14 = 0306
B15 = 0508
B18 = 0612
W = X7R
X = X5R
1st two digits are signifi-
cant; third digit denotes
number of zeros
103 = 0.01 µF (10NF)
104 = 0.10 µF
M = ± 20%
*Values < 10 pF only
V = NI Barrier with 100%
Tin Plating (Matte)
T = SnPb
4 = Unmarked
(Not available)
E = Embossed 7”
T = Punched 7”
No code = bulk
Tape specs.
per EIA RS481
CASE SIZE AVAILABLE CAPACITANCE
JDI EIA MM
DIELECTRIC 10nF 22nF 47nF 0.10uF 0.22uF 0.47uF 1.00uF 2.2uF 4.7uF 10uF
B14 0306 0816
X7R 25V 25V 25V 16V 6.3V
X5R 10V 10V 6.3V 6.3V 6.3V
B15 0508 1220
X7R 50V 50V 25V 25V 16V 6.3V 6.3V
X5R 10V 10V 6.3V
B18 0612 1632
X7R 50V 50V 50V 50V 25V 16V 6.3V
X5R 10V 10V 6.3V 6.3V
Please visit our website for complete specifications
15
www.johansondielectrics.com
CHIP FILTER / FEED-THRU CAPACITORS
Our Feed-Thru Capacitors provide excellent EMI, I/O & Power Line filtering
exhibiting much lower inductance than standard SMT capacitors which results in
broader frequency response. These are Precious Metal Electrode (PME) products
with higher current ratings than comparable Base Metal Electrode (BME) parts.
FEATURES APPLICATIONS
• 1 Amp Current Rating • DC Power Line EMI Filter
• Low Inductance, High SRF • RF Immunity FIlter
• Surface Mount Non-polarized • RF Amplifier Gain Filter
• Sn-Pb and Polyterm® Options
HOW TO ORDER CHIP FILTER / FEED-THRU
P/N written: 250F14W103YV4E
250 F14 W 103 Y V 4 E
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
250 = 25 V
500 = 50 V
101 = 100 V
201 = 200 V
F14 = 0603
F15 = 0805
F18 = 1206
N = NP0
W = X7R
1st two digits are signifi-
cant; third digit denotes
number of zeros.
102 = 1000 pF
103 = 0.01 µF
104 = 0.10 µF
K = ± 10%
M = ± 20%
Y = + 50% -20%
V = Ni Barrier w/
100% Sn Plating
T = Ni Barrier w/
95%Sn/5%Pb Plating
4 = Unmarked
(Not available)
E =Embossed 7”
T =Punched 7”
No code = bulk
Tape specs.
per EIA RS481
CASE SIZE AVAILABLE CAPACITANCE
JDI EIA MM DIELECTRIC 22pF 47pF 100pF 220pF 470pF 1.0nF 2.2nF 4.7nF 10nF 22nF 47nF 100nF 220nF
F14 0603 1608
NP0
50V 50V 50V 50V
X7R
25V 25V 25V 25V 25V 25V 25V
F15 0805 2012
NP0
100V 100V 100V 100V 100V
X7R
50V 50V 50V 50V 50V 50V 50V
F18 1206 3216
NP0
100V 100V 100V 100V 100V 100V
X7R
50V 50V 50V 50V 50V 50V 50V
Please visit our website for complete specifications
-70
-60
-50
-40
-30
-20
-10
0
0110 1001,000 10,000
Inseron Loss (dB)
Frequency (MHz)
Inseron Loss vs Frequency
22nF
2.2nF
1nF
16
www.johansondielectrics.com
HIGH TEMPERATURE SURFACE MOUNT MLCCS 200°C
Johanson’s high temperature MLCC series exhibit stable performance
across an extended operating temperature range of -55°C to +200°C.
Both Class I and Class II parts are available with DC voltage ratings of
50,100 and 200V satisfying a wide range of demanding applications.
FEATURES APPLICATIONS
• Stable 200°C Operation • Deep Hole Drilling Electronics
• Compact SMD Chip • High Temperature Modules
• Polyterm® Termination Option • Industrial Equipment
• Sn-Pb Termination Option • Automotive • Avionics
MECHANICAL CHARACTERISTICS
RATED
VOLTAGE
NP0 DIELECTRIC X7R DIELECTRIC
MINIMUM MAXIMUM MINIMUM MAXIMUM
T07/0402
25 VDC 10 pF 270 pF 100 pF 4700 pF
50 VDC 10 pF 120 pF 100 pF 1500 pF
100 VDC 10 pF 82 pF 10 pF 390 pF
200 VDC 10 pF 50 pF 10 pF 100 pF
T14/0603
25 VDC 10 pF 820 pF 1000 pF 0.022 µF
50 VDC 10 pF 330 pF 1000 pF 0.010 µF
100 VDC 10 pF 220 pF 100 pF 2200 pF
200 VDC 10 pF 120 pF 100 pF 560 pF
T15/0805
25 VDC 100 pF 2200 pF 1000 pF 0.100 µF
50 VDC 100 pF 1500 pF 1000 pF 0.033 µF
100 VDC 100 pF 1000 pF 1000 pF 0.010 µF
200 VDC 10 pF 680 pF 100 pF 2200 pF
Inches (mm)
.080 ±.010 (2.03 ±.25)
.050 ±.010 (1.27 ±.25)
.055 Max. (1.40)
.020±.010 (0.51±.25 )
L
W
T
E/B
Inches (mm)
.040 ±.004 (1.02 ±.10)
.020 ±.004 (0.51 ±.10)
.025 Max. (0.64)
.008±.004 (.20±.10)
L
W
T
E/B
Inches (mm)
.063 ±.008 (1.60 ±.20)
.032 ±.008 (0.81 ±.20)
.035 Max. (0.89)
.010±.005 (.25±.13)
L
W
T
E/B
ELECTRICAL CHARACTERISTICS
X7R Temp. Only
X7R Temp. & Rated Voltage (100%)
NP0 Temp. & Rated Voltage (100%)
NP0 X7R
OPERATING RANGE:
-55 to +200°C -55 to +200°C
TEMPERATURE
COEFFICIENT:
0±30ppm/°C
(-55to+125°C) 0±15% (-55to+125°C)
200°C CAP. DROP:
-0.5% max. -45% max.
DISSIPATION FACTOR:
0.001 (0.1%) max. 0.020 (2.0%) max.
AGING RATE:
None <1.0% per decade
INSULATION RESISTANCE:
25°C IR >100GΩ or 1000ΩF (whichever
200°C IR >1ΩF or 100MΩ is less)
WITHSTANDING VOLTAGE:
2.5 X WVDC for ratings ≤ 200 VDC
1.5 X WVDC for ratings 201-500 VDC
TEST CONDITIONS:
C > 100 pF; 1kHz ±50Hz; 1.0±0.2 VRMS
C ≤ 100 pF; 1Mhz ±50kHz; 1.0±0.2 VRMS
17
www.johansondielectrics.com
HIGH TEMPERATURE SURFACE MOUNT MLCCS 200°C
L
W
T
E/B
MECHANICAL CHARACTERISTICS
RATED
VOLTAGE
NP0 DIELECTRIC X7R DIELECTRIC
MINIMUM MAXIMUM MINIMUM MAXIMUM
T18/1206
25 VDC 100 pF 6800 pF 1000 pF 0.220 µF
50 VDC 100 pF 3300 pF 1000 pF 0.100 µF
100 VDC 100 pF 2200 pF 1000 pF 0.022 µF
200 VDC 100 pF 1500 pF 1000 pF 5600 pF
T41/1210
25 VDC 1000 pF 0.015 µF 0.047 µF 0.470 µF
50 VDC 1000 pF 5600 pF 0.047 µF 0.220 µF
100 VDC 100 pF 4700 pF 0.047 µF 0.056 µF
200 VDC 100 pF 3300 pF 0.0047 µF 0.015 µF
T43/1812
25 VDC 1000 pF 0.033 µF 0.047 µF 1.000 µF
50 VDC 1000 pF 0.012 µF 0.047 µF 0.470 µF
100 VDC 1000 pF 0.010 µF 0.047 µF 0.180 µF
200 VDC 1000 pF 8200 pF 0.047 µF 0.047 µF
T49/1825
25 VDC 1000 pF 0.033 µF 0.10 µF 2.200 µF
50 VDC 1000 pF 0.027 µF 0.10 µF 1.000 µF
100 VDC 1000 pF 0.022 µF 0.10 µF 0.560 µF
200 VDC 1000 pF 0.018 µF 0.10 µF 0.150 µF
T48/2225
25 VDC 1000 pF 0.100 µF 0.10 µF 3.300 µF
50 VDC 1000 pF 0.039 µF 0.10 µF 1.500 µF
100 VDC 1000 pF 0.033 µF 0.10 µF 0.820 µF
200 VDC 1000 pF 0.022 µF 0.10 µF 0.220 µF
Inches (mm)
.125 ±.010 (3.17 ±.25)
.062 ±.010 (1.57 ±.25)
.067 Max. (1.70)
.020±.010 (0.51±.25 )
L
W
T
E/B
Inches (mm)
.125 ±.010 (3.18 ±.25)
.095 ±.010 (2.41 ±.25)
.090 Max. (2.28)
.020±.010 (0.51±.25 )
L
W
T
E/B
Inches (mm)
.175 ±.010 (4.45 ±.25)
.125 ±.010 (3.17 ±.25)
.110 Max. (2.80)
.025±.015 (0.64±.38)
L
W
T
E/B
Inches (mm)
.180 ±.010 (4.57 ±.25)
.250 ±.010 (6.35 ±.25)
.140 Max. (3.56)
.025±.015 (0.64±.38)
L
W
T
E/B
Inches (mm)
.225 ±.010 (5.72 ±.25)
.255 ±.015 (6.48 ±.38)
.160 Max. (4.06)
.025±.015 (0.64±.38)
L
W
T
E/B
HOW TO ORDER 20C MLCCS
P/N written: 500T14W103KV4E
500 T14 W 103 K V 4 E
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
250 = 25 V
500 = 50 V
101 = 100 V
201 = 200 V
T07 = 0402
T14 = 0603
T15 = 0805
T18 = 1206
T41 = 1210
T43 = 1812
T49 = 1825
T48 = 2225
N = NP0
W = X7R
1st two digits are signifi-
cant; third digit denotes
number of zeros.
102 = 1000 pF
103 = 0.01 µF
104 = 0.10 µF
NP0
J = ± 5%
K = ± 10%
X7R
K = ± 10%
M = ± 20%
V = Ni Barrier w/
100% Sn Plating (150
°
C)
T = Ni Barrier w/
95%Sn/5%Pb Plating (150
°
C)
E = Ni Barrier w/
100% Sn Plating (180
°
C)
P = Palladium Silver Pd-Ag
(200
°
C)
4 = Unmarked
(Not available)
E = Embossed 7”
T = Punched 7”
No code = bulk
Tape specs.
per EIA RS481
See page 79 for additional dielectric specifications.
18
www.johansondielectrics.com
TANCERAM
®
CHIP CAPACITORS
TANCERAM
®
chip capacitors can replace tantalum capacitors
in many applications and offer several key advantages over
traditional tantalums. Because TANCERAM
®
capacitors exhibit
extremely low ESR, equivalent circuit performance can often be
achieved using considerably lower capacitance values. Low
DC leakage reduces current drain, extending the battery life of
portable products. TANCERAM
®
high DC breakdown voltage
ratings offer improved reliability and eliminate large voltage
de-rating common when designing with tantalums.
ADVANTAGES
• Low ESR • Low DC Leakage
• Higher Surge Voltage • Non-polarized Devices
• Reduced CHIP Size • Improved Reliability
• Higher Insulation Resistance • Higher Ripple Current
APPLICATIONS
• Switching Power Supply Smoothing (Input/Output) • Backlighting Inverters
• DC/DC Converter Smoothing (Input/Output) • General Digital Circuits
HOW TO ORDER TANCERAM®
Part number written: 100R15X106MV4E
100 R15 X 106 M V 4 E
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
6R3 = 6.3 V
100 = 10 V
160 = 16 V
250 = 25 V
500 = 50 V
101 = 100 V
See Chart
W = X7R
X = X5R
1st two digits are
significant; third digit
denotes number of
zeros.
105 = 1.00 µF
476 = 47.0 µF
107 = 100 µF
K = ±10%
M = ±20%
V = Nickel Barrier
with 100% Tin
Plating (Matte)
T = SnPb*
(*available on
select parts)
4 = Unmarked
Code Type Reel
E Plastic 7”
T Paper 7”
Tape specifications
conform to EIA
RS481
19
www.johansondielectrics.com
ELECTRICAL CHARACTERISTICS
DIELECTRIC: X7R X5R
TEMPERATURE COEFFICIENT:
±15% (-55 to +125°C) ±15% (-55 to +85°C)
DISSIPATION FACTOR:
For ≥ 50 VDC: 5% max.
For ≤ 35 VDC: 10% max.
For ≥ 50 VDC: 5% max.
For ≤ 35 VDC: 10% max.
INSULATION RESISTANCE (MIN. @ 25°C, WVDC)
100 ΩF or 10 GΩ, whichever is less
DIELECTRIC STRENGTH:
2.5 X WVDC, 25°C, 50mA max.
TEST CONDITIONS:
Capacitance values ≤ 10 µF: 1.0kHz±50Hz @ 1.0±0.2 Vrms
Capacitance values > 10 µF: 120Hz±10Hz @ 0.5V±0.1 Vrms
OTHER:
See page 79 for additional dielectric specifications.
TANCERAM
®
CHIP CAPACITORS
L
W
TE/B
DIELECTRIC
W (X7R)
X (X5R)
CASE SIZE CAPACITANCE SELECTION
EIA / JDI INCHES
(mm) VDC 1.0 µF 2.2 µF 3.3 µF 4.7 µF 10 µF 22 µF 47 µF 100 µF
105 225 335 475 106 226 476 107
0402
R07
L
W
T
EB
.040 ±.004
.020 ±.004
.025 Max.
.008 ±.004
(1.0 2 ±.10)
(0.51 ±.10)
(0.64)
(0.20±.10)
16
10
6.3
0603
R14
L
W
T
EB
.063 ±.008
.032 ±.008
.035 Max.
.010±.005
(1.60 ±.20)
(0.81 ±.20)
(0.89)
(.25±.13)
25
16
10
6.3
0805
R15
L
W
T
EB
.080 ±.010
.050 ±.010
.060 Max.
.020±.010
(2.03 ±.25)
(1.27 ±.25)
(1.52)
(0.51±.25 )
50
25
16
10
6.3
1206
R18
L
W
T
EB
.125 ±.013
.062 ±.010
.070 Max.
.020 +.015-0.01
(3.17 ±.35)
(1.57 ±.25)
(1.78)
(0.51+.38-.25)
50
35
25
16
10
6.3
1210
S41
L
W
T
EB
.126 ±.016
.098 ±.012
.110 Ma x.
.020 +.015-.010
(3.20 ±.40)
(2.50 ±.30)
(2.8)
(0.51+.38-.25)
100
50
35
25
16
10
6.3
1812
S43
L
W
T
EB
.177 ±.016
.126 ±.015
.14 0 M a x.
.035 ±.020
(4.50 ±.40)
(3.20 ±.38)
(3.55)
(0.89 ±0.51)
100
50
25
W X W X W X W X W X W X W X W X
“K” OR “M” TOLERANCE ONLY “M” TOLERANCE
20
www.johansondielectrics.com
CASE SIZE
Voltage
AVAILABLE CAPACITANCE CODE
JDI Inches (mm)
0R5
XRX
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
R05
L
W
T
EB
0201
.024 ±.001
.012 ±.001
.012 ±.001
.006 ±.002
(0603)
(0.60 ±.03)
(0.30 ±.03)
(0.30 ±.03)
(0.15±.05)
25V
16V
10V
R07
L
W
T
EB
0402
.040 ±.004
.020 ±.004
.025 Max.
.008 ±.004
(1005)
(1.0 2 ±.10)
(0.51 ±.10)
(0.64)
(0.20±.10)
50V
25V
16V
10V
R14
L
W
T
EB
0603
.063 ±.008
.032 ±.008
.035 Max.
.010±.005
(1608)
(1.60 ±.20)
(0.81 ±.20)
(0.89)
(.25±.13)
200V
100V
50V
25V
16V
R15
L
W
T
EB
0805
.080 ±.010
.050 ±.010
.050 Max.
.020±.010
(2012)
(2.03 ±.25)
(1.27 ±.25)
(1.27)
(0.51±.25 )
200V
100V
50V
25V
16V
R18
L
W
T
EB
1206
.125 ±.010
.062 ±.010
.050 Max.
.020 ±.010
(3216)
(3.17 ±.25 )
(1.57 ±.25)
(1.27)
(0.51 ±.25)
200V
100V
50V
25V
S41
L
W
T
EB
1210
.125 ±.010
.095 ±.010
.065 Max.
.020 ±.010
(3224)
(3.18 ±.25)
(2.41 ±.25)
(1.65)
(0.51 ±.25)
200V
100V
NP0
50V
L
W
TE/
B
X7R
25V
X5R
16V
S43
L
W
T
EB
1812
.175 ±.010
.125 ±.010
.085 Max.
.025 ±.015
(4532)
(4.45 ±.25)
(3.17 ±.25 )
(2.16)
(0.64 ±.38)
200V
100V
50V
25V
0R5
XRX
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
SURFACE MOUNT MLCCS 10 - 200 VDC
HOW TO ORDER - SURFACE MOUNT MLCC
Part number written: 100R07W104KV4E
100 R 07 W 104 K V 4E
VOLTAGE SERIES/SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
100 = 10 V DC
160 = 16 V DC
250 = 25 V DC
500 = 50 V DC
101 = 100 V DC
201 = 200 V DC
R05 = 0201
R07 = 0402
R14 = 0603
R15 = 0805
R18 = 1206
S41 = 1210
S43 = 1812
N = NP0
W = X7R
X = X5R
1st two digits are
significant; third
digit denotes
number of zeros,
R = decimal.
5R6 = 5.6 pF
100 = 10 pF
102 = 1,000 pF
474 = 0.47 µF
* B = ± 0.10 pF
* C = ± 0.25 pF
* D = ± 0.50 pF
* F = ± 1 %
* G = ± 2%
* J = ± 5%
* K = ± 10%
* M = ± 20%
*Values < 10 pF
only
V = Nickel Barrier
with 100% Tin
Plating (Matte)
T = SnPb
3 = Special
4 = Unmarked
6 = EIA Code*
*Not available
on sizes
≤ 0402
E = Embossed 7”
T = Punched 7”
U = Embossed 13”
R = Punched 13”
No code = bulk
Tape specifications
on page 48. Not all
tape styles are avail-
able on all parts.
21
www.johansondielectrics.com
AVAILABLE CAPACITANCE CODE
Voltage
CASE
SIZE
122
152
182
222
272
332
392
472
562
822
103
123
153
183
223
273
333
473
563
683
823
104
224
334
474
105
225
335
475
106
476
107
0201
R05
NP0
25V
X7R
16V
X5R
10V
See Tanceram High
Capacitance Series
for values ≥ 1.0µF
50V
0402
R07
25V
16V
10V
200V
0603
R14
100V
50V
25V
16V
200V
0805
R15
100V
50V
25V
16V
200V
1206
R18
100V
50V
25V
200V
1210
S41
100V
50V
25V
16V
200V
1812
S43
100V
50V
25V
122
152
182
222
272
332
392
472
562
822
103
123
153
183
223
273
333
473
563
683
823
104
224
334
474
105
225
335
475
106
476
107
SURFACE MOUNT MLCCS 10 - 200 VDC
ELECTRICAL CHARACTERISTICS
Please refer to page 79 of the catalog or www.johansondielectrics.com
22
www.johansondielectrics.com
CASE SIZE
E
C
D
BA
.250" MIN
.100" MAX
.025" MIN
.100" TYP
.055"
± .010
.020"
± .002
F
.050" min
.010" ± .002
.070" ± .010
.050" min
STRAIGHT LEAD L-LEAD J-LEAD
E
C
D
BA
.250" MIN
.100" MAX
.025" MIN .100" TYP
.055"
± .010
.020"
± .002
F
.050" min
.010" ± .002
.070" ± .010
.050" min
STACKED SMPS CERAMIC CAPACITORS
Stacked Switch-Mode ceramic capacitors feature large
capacitance values and exhibit low ESR (equivalent series
resistance) and low ESL (equivalent series inductance) making
them well suited for high power and high frequency applications
where tantalum or aluminum electrolytic capacitors may not
be suitable. The P-Series feature mechanical and pin-out
configurations per DSCC 87106 and 88011 drawings while the
E-Series feature mechanical and pin-out configurations more
common in European design applications.
KEY FEATURES
• P-Series Approved to DSCC Drawings 87106 & 88011
MIL-PRF-49470
• New T-Series 200°C for downhole tools and aircraft engine
control applications.
• E-Series Common European Lead Styles available to
MIL-PRF-49470 requirements.
• NP0 & X7R Dielectrics, 50 to 500 VDC Ratings
• Low ESR / Low ESL, Ideal for SMPS Filtering Applications
• Custom Sizes, Voltages, and Values Available
HOW TO ORDER STACKED SMPS
Part number written: 201P03W275KJ4H
201 P03 W 275 K J 4 H
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
500 = 50 V
101 = 100 V
201 = 200 V
501 = 500 V
See Chart
N = NP0
B = BX
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros.
101 = 100 pF
102 = 1000 pF
103 = 0.01 µF
105 = 1.00 µF
J = ±5%
K= ±10%
L = ±15%
M = ±20%
N = ±30%
Z = +80% -20%
P = +100% -0%
J = “J” Leads
(formed in)
K = “J” Leads with
reduced height of
.045” ±.010”
L = “L” Leads
(formed out)
M = “L” Leads with
reduced height of
.045” ±.010”
N = Straight Lead
4 = Standard
3 = Specified
T = Tape and Reel
H = High Reliability
testing per customer
requirements
S = Special Part
23
www.johansondielectrics.com
STACKED SMPS CERAMIC CAPACITORS
P-SERIES DSCC STYLE X7R CAPACITANCE / VOLTAGE SELECTION
CASE
SIZE
CHIP
LAYERS
LEADS
/SIDE
MECHANICAL SIZE RANGE (IN.) X7R MAX CAPACITANCE (
µ
F)
LENGTH (D) WIDTH (E) TMAX (B) 50V 100V 200V 500V
P05
13 0.275 0.300 .185 3.0 2.2 1.0 0.50
P55
5 .715 15 11 5.0 2.5
P04
14 0.425 0.440 .185 9.0 6.5 3.0 1.5
P54
5.715 45 32 15 7.5
P03
110 1.075 0.500 .185 28 20 9.5 4.7
P53
5.715 140 100 47 23
P01
120 2.075 0.500 .185 50 40 19 9.4
P51
5.715 250 200 95 46
P02
115 1.535 0.870 .185 75 55 25 14
P52
5.715 370 270 125 70
P06
120 2.075 1.350 .185 160 110 50 25
P56
5.715 800 550 250 125
Please refer to our website for complete offering including NP0 & BX capacitance ranges.
E-SERIES EUROPEAN STYLE X7R CAPACITANCE / VOLTAGE SELECTION
CASE
SIZE
CHIP
LAYERS
LEADS
/SIDE
MECHANICAL SIZE RANGE (MM) X7R MAX CAPACITANCE (
µ
F)
LENGTH (D) WIDTH (E) TMAX (B) 50V 100V 200V 500V
E24
13 8.7 9.2 3.8 5.0 4.0 2.5 1.0
E54
4 14.8 20 16 10 4.0
E26
15 13.6 14.9 3. 16 12 7.5 3.3
E56
4 14.8 64 48 30 13
E21
16 16.6 21.6 3.8 30 22 14 6.0
E51
4 14.8 120 88 56 24
E28
114 38.2 12.0 3.8 35 25 16 7.0
E58
4 14.8 140 100 64 28
E29
114 40.6 24.0 3.8 75 50 35 16
E59
4 14.8 300 200 140 64
Please refer to our website for complete offering including NP0 & BX capacitance ranges.
NEW 20C T-SERIES CAPACITANCE / VOLTAGE SELECTION
CASE
SIZE
CHIP
LAYERS
LEADS
/SIDE
MECHANICAL SIZE RANGE (IN.) MAX CAPACITANCE (
µ
F)
LENGTH (D) WIDTH (E) TMAX (B) 50V 100V 200V
T05
13 0.275 0.300 .185 1.20 0.68 0.33
T55
5 .715 5.60 3.30 1.50
T04
14 0.425 0.440 .185 2.70 1.50 0.82
T54
5.715 15.0 8.20 3.90
T03
110 1.075 0.500 .185 10.0 5.60 2.70
T53
5.715 47.0 27.0 12.0
Please refer to our website for complete offering including NP0 capacitance ranges.
24
www.johansondielectrics.com
MINI-SWITCH-MODE
®
CAPACITORS
JDI’s Mini Switch-Mode
®
ceramic capacitors combine the
advantages of high capacitance found in tantalum capacitors
with very low ESR performance of ceramic capacitors. The “J”
and “L” lead configurations replace 1825 and 2225 SMT chips to
provide stress relief and prevent cracking due to thermal cycling
or mechanical board flexing. Another plus of the J-lead style is
that this configuration allows use of the same solder lands as
the SMT chips. See the Stacked Switch-Mode section for larger
values. See also the Technical Notes on soldering and handling
and suggested solder lands.
FEATURES
• High Capacitance, Small Size
• Low ESR/ESL
• Leadframe reduces thermal & mechanical stress due to
board flexure and TCE mismatch
APPLICATIONS
• DC-DC Converters
• Power Supply Input & Output Filters
CAPACITANCE SELECTION
SIZE
CODE
EIA CHIP
SIZE
NP0 Max Capacitance (uF) X7R Max Capacitance (uF)
25V 50V 100V 200V 500V 25V 50V 100V 200V 500V
P09 1825 0.056 0.047 0.039 0.027 0.018 1.5 1.2 0.75 0.56 0.27
P29 1825 0.11 0.094 0.078 0.054 0.036 3.0 2.4 1.5 1.1 0.54
P39 1825 0.16 0.14 0.11 0.081 0.054 4.5 3.6 2.2 1.6 0.81
P49 1825 0.22 0.18 0.15 0.10 0.07 6.0 4.8 3.0 2.2 1.0
P08 2225 0.068 0.056 0.047 0.033 0.027 2.7 2.2 1.5 1.2 0.39
P28 2225 0.13 0.11 0.094 0.066 0.054 5.4 4.4 3.0 2.4 0.78
P38 2225 0.20 0.16 0.14 0.10 0.081 8.1 6.6 4.5 3.6 1.1
P48 2225 0.27 0.22 0.18 0.13 0.10 10 8.8 6.0 4.8 1.5
25
www.johansondielectrics.com
CASE SIZE
DIMENSIONS
APPLICABLE
TO ALL SIZES:
IN. MM
H ± .010
.070 1.78
C TYP.
.100 2.54
P ± .015
.065 1.65
DIMENSIONS
APPLICABLE
TO SPECIFIC SIZES:
P08 P09 P28 P29 P38 P39 P48 P49
IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM
L MAX
.280 7.11 0.24 6.1 0.28 7.11 0.24 6.1 0.28 7.11 0.24 6.1 0.28 7.11 0.24 6.1
W MAX
.270 6.86 0.27 6.86 0.27 6.86 0.27 6.86 0.27 6.86 0.27 6.86 0.27 6.86 0.27 6.86
T MAX
.095 2.41 0.095 2.41 0.19 4.83 0.19 4.83 0.285 7.24 0.285 7.24 0.38 9.65 0.38 9.65
Note: J-Lead and L-Lead options are available on all sizes above
Lp
W
c
T
h
L
p
W
c
T
h
L
p
W
c
T
h
L
p
W
c
T
h
MINI-SWITCH-MODE
®
CAPACITORS
HOW TO ORDER - MINI SWITCHMODE®
Part number written: 500P28W395KJ4U
500 P28 W 395 K J 4 U
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
250 = 25 V
500 = 50 V
101 = 100 V
201 = 200 V
501 = 500 V
See Chart
N = NP0
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros.
103 = 0.01 μF
105 = 1.0 μF
106 = 10 uF
J = ±5%
K = ±10%
M = ±20%
Z = +80% -20%
J = “J” Leads
(formed in)
L = “L” Leads
(formed out)
3 = Standard
4 = Unmarked
U = Tape and Reel
16mm, 13” Reel
NONE = Bulk pack
H = High Reliability
testing per customer
requirements
S = Special Part
ELECTRICAL CHARACTERISTICS
DIELECTRIC: NP0 X7R
TEMPERATURE COEFFICIENT:
0 ±30ppm/°C (-55 to +125°C) ±15% (-55 to +125°C)
DISSIPATION FACTOR:
0.1% max. 2.5% max.
AGING:
None -2.5% per decade hour
INSULATION RESISTANCE (MIN. @ 25°C, WVDC)
1000 ΩF or 100 GΩ, whichever is less 500 ΩF or 50 GΩ, whichever is less
DIELECTRIC STRENGTH:
For 500V Ratings: 750VDC, 25ºC, 50mA max
For 200V Ratings: 2xWVDC, 25ºC, 50mA max
For 25-100V Ratings: 2.5xWVDC, 25ºC, 50
mA max
TEST CONDITIONS:
1kHz ±50Hz;1.0±0.2 VRMS
OTHER:
See page 79 for additional dielectric specifications.
26
www.johansondielectrics.com
FEATURES APPLICATIONS
• High Capacitance, Small SIze • DC-DC Converters
• Low ESR/ESL • Power Supply Input & Output Filters
Leadframe reduces thermal & mechanical stress
due to board flexure and TCE mismatch
• High Capacitance Applications Where Increased
Reliability is Required
• Green / ROHS Compliant
BME MINI-SWITCH-MODE
®
CAPACITORS
This new series of miniature switchmode power supply filter
capacitors uses BME (Base Metal Electrode) construction to
achieve 300-400% capacitance increases and component size
reductions compared to their PME (Precious Metal Electrode)
counterparts per the comparison examples below.
BME Size / Capacitance Comparison
Technology Chips Volts Max. Cap.
PME 1x 1825 50V 1.2µF
BME 1x 1812 50V 4.7µF
PME 2x 2225 100V 4.4µF
BME 2x 2220 100V 10µF
CAPACITANCE / VOLTAGE CASE SIZE / PART NUMBER
CAPACITANCE DC VOLTAGE SIZE P0A SIZE P07 SIZE P2A SIZE P27
RATING RATING 1812 SINGLE STACK 2220 SINGLE STACK 1812 DOUBLE STACK 2220 DOUBLE STACK
2.2 µF 100V 101P0AW225MJ4U+RC
4.7 µF 50V 500P0AW475MJ4U+RC
4.7 µF 100V 101P07W475MJ4U+RC 101P2AW475MJ4U+RC
10 µF 50V 500P07W106MJ4U+RC 500P2AW106MJ4U+RC
10 µF 100V 101P27W106MJ4U+RC
22 µF 50V 500P27W226MJ4U+RC
Dimensions
Applicable
to specific sizes:
IN. MM IN. MM IN. MM IN. MM
L MAX:
0.217 5.5 0.256 6.5 0.217 5.5 0.256 6.5
W MAX:
0.157 4.0 0.217 5.5 0.157 4.0 0.217 5.5
H MAX:
0.118 3.0 0.118 3.0 0.236 6.0 0.236 6.0
Dimensions Applicable
to all sizes:
Lp2
W
c
H
p1
Lp2
W
H
h1
p1 c
h1
Lp2
W
c
H
p1
Lp2
W
H
h1
p1 c
h1
IN. MM
H1 TYP.
.059 1.50
C TYP.
.10 0 2.54
P1 TYP.
.020 0.50
P2 ± 0.02
.065 1.65
27
www.johansondielectrics.com
ELECTRICAL CHARACTERISTICS
OPERATING RANGE: -55 to +125°C
TEMPERATURE COEFFICIENT:
X7R, ±
15%
DISSIPATION FACTOR: 0.020 (2.0%) max.
AGING RATE: <2.5% per decade
INSULATION RESISTANCE:
25°C IR >100GΩ or 1000
F
whichever is less
WITHSTANDING VOLTAGE: 2.5 X WVDC for 50 VDC
2.0 X WVDC for 100 VDC
TEST CONDITIONS:
1kHz ±50Hz; 1.0±0.2 VRMS
, 25°C
TYPICAL APPLICATION: DC-DC CONVERTER INPUT & OUTPUT FILTERING
HOW TO ORDER - BME MINI SWITCH-MODE®
Part number written: 500P07W106MJ4U+RC
500 P07 W 106 M J 4 U +RC
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
ROHS CODE
500 = 50 V
101 = 100 V
See Chart W = X7R 1st two digits are
significant; third digit
denotes number of
zeros.
225 = 2.2 μF
106 = 10 uF
M = ±20% J = “J” Leads
(formed in)
4 = Unmarked U = Embossed
Tape 13” Reel per
EIA RS481
+RC = RoHS
Compliant
BME MINI-SWITCH-MODE
®
CAPACITORS
Controller
Vin Vout
Input
Filter
Capacitor
Output
Filter
Capacitor
28
www.johansondielectrics.com
SWITCH-MODE RADIAL LEADED CAPACITORS
KEY FEATURES
• Rated Working Voltages from 25 to 500 VDC
• Rugged Epoxy Coating Offers Increased Protection
• Hi-Rel Screened Versions Available
• Custom Sizes, Voltages, and Values Available
ADVANTAGES
• Power Supplies • Surge Protection
• Voltage Multipliers • Industrial Control Circuits
• Data Isolation • Custom Applications
CASE SIZE
RATED
VOLTAGE
NP0 CAPACITANCE (MAX.) X7R CAPACITANCE (MAX.)
IN. (MM) VALUE CODE VALUE CODE
H03
W
H
T
S
LD
.300 max.
.300 max.
.200 max.
.200 nom.
.020 nom.
(7.62 max.)
(7.62 max.)
(5.08 max.)
(5.08 nom.)
(.510 nom.)
25 VDC .070 µF 703 2.00 µF 205
50 VDC .060 µF 603 1.60 µF 165
100 VDC .050 µF 503 1.10 µF 115
200 VDC .040 µF 403 .730 µF 734
500 VDC .020 µF 203 .250 µF 254
H04
W
H
T
S
LD
.400 max.
.400 max.
.200 max.
.200 nom.
.020 nom.
(10.2 max.)
(10.2 max.)
(5.08 max.)
(5.08 nom.)
(.510 nom.)
25 VDC .120 µF 124 5.10 µF 515
50 VDC .100 µF 104 4.10 µF 415
100 VDC .082 µF 823 2.70 µF 275
200 VDC .050 µF 503 1.80 µF 185
500 VDC .030 µF 303 .670 µF 674
H05
W
H
T
S
LD
.500 max.
.500 max.
.200 max.
.400 nom.
.025 nom.
(12.7 max.)
(12.7 max.)
(5.08 max.)
(10.2 nom.)
(.635 nom.)
25 VDC .240 µF 244 8.70 µF 875
50 VDC .200 µF 204 7.20 µF 725
100 VDC .180 µF 184 4.80 µF 485
200 VDC .110 µF 114 3.30 µF 335
500 VDC .070 µF 703 1.10 µF 115
H06
W
H
T
S
LD
.870 max.
.600 max.
.200 max.
.790 nom.
.032 nom.
(22.1 max.)
(15.2 max.)
(5.08 max.)
(20.1 nom.)
(.813 nom.)
25 VDC .750 µF 754 22.0 µF 226
50 VDC .620 µF 624 17.0 µF 176
100 VDC .560 µF 564 13.0 µF 136
200 VDC .360 µF 364 8.00 µF 805
500 VDC .240 µF 244 2.90 µF 295
See page 79 for additional dielectric specifications.
29
www.johansondielectrics.com
W
H
T
S Meniscus
Height
.050" Max
NOTE: Lead lengths are typically 1.25” for orders in bulk packaging. Leads are typically
1.00” for tape and reel packaging. Tape and reel packaging comes in 1000 piece reels.
SWITCH-MODE RADIAL LEADED CAPACITORS
HOW TO ORDER SWITCH-MODE RADIALS
Part number written: 201H07W105KQ4
201 H07 W 105 K Q 4 T
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
250 = 25 V
500 = 50 V
101 = 100 V
201 = 200 V
501 = 500 V
See Chart
N = NP0
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros.
101 = 100 pF
102 = 1000 pF
103 = 0.01 µF
105 = 1.00 µF
J = ± 5%
K = ± 10%
M = ± 20%
Z = +80% -20%
Q = Leaded &
Encapsulated
4 = Standard
3 = Specified
T = Tape and Reel
H = High Rel Testing
per customer
requirements
S = Special Part
CASE SIZE
RATED
VOLTAGE
NP0 CAPACITANCE (MAX.) X7R CAPACITANCE (MAX.)
IN. (MM) VALUE CODE VALUE CODE
H07
W
H
T
S
LD
1.10 max.
.600 max.
.200 max.
.980 nom.
.032 nom.
(27.9 max.)
(15.2 max.)
(5.08 max.)
(24.9 nom.)
(.813 nom.)
25 VDC
.680 µF 684 35.0 µF 356
50 VDC
.560 µF 564 28.0 µF 286
100 VDC
.470 µF 474 19.0 µF 196
200 VDC
.330 µF 334 13.0 µF 136
500 VDC
.200 µF 204 4.60 µF 465
H08
W
H
T
S
LD
1.10 max.
.600 max.
.350 max.
.980 nom.
.032 nom.
(27.9 max.)
(15.2 max.)
(8.89 max.)
(24.9 nom.)
(.813 nom.)
25 VDC
1.20 µF 125 70.0 µF 706
50 VDC
1.10 µF 115 56.0 µF 566
100 VDC
.820 µF 824 37.0 µF 376
200 VDC
.470 µF 474 26.0 µF 266
500 VDC
.300 µF 304 8.70 µF 875
H09
W
H
T
S
LD
.670 max.
.540 max.
.200 max.
.575 nom.
.025 nom.
(17 max.)
(13.7 max.)
(5.08 max.)
(14.6 nom.)
(.635 nom.)
25 VDC
.450 µF 454 13.0 µF 136
50 VDC
.360 µF 364 10.0 µF 106
100 VDC
.330 µF 334 7.20 µF 725
200 VDC
.240 µF 244 5.00 µF 505
500 VDC
.180 µF 184 1.70 µF 175
H10
W
H
T
S
LD
.930 max.
.720 max.
.250 max.
.800 nom.
.032 nom.
(23.6 max.)
(18.3 max.)
(6.35 max.)
(20.3 nom.)
(.813 nom.)
25 VDC
1.00 µF 105 38.0 µF 386
50 VDC
.900 µF 904 30.0 µF 306
100 VDC
.750 µF 754 20.0 µF 206
200 VDC
.470 µF 474 14.0 µF 146
500 VDC
.300 µF 304 5.80 µF 585
RoHS available on request.
30
www.johansondielectrics.com
HIGH VOLTAGE RADIAL LEADED CAPACITORS
KEY FEATURES
• Rated Working Voltages from 500 to 5000 VDC
• Rugged Epoxy Coating Offers Increased Protection
• Compact MLC Designs Smaller Than Film or Disc
• NEW 200°C Versions Available for Oil &
Geophysical Tool, Aircraft Engine Control Applications
• DSCC Drawing & Other Screened Versions Available
ADVANTAGES
• Power Supplies • Surge Protection
• Voltage Multipliers • Industrial Control Circuits
• Data Isolation • Custom Applications
CASE SIZE
RATED
VOLTAGE
NP0 CAPACITANCE (MAX.) X7R CAPACITANCE (MAX.)
IN. (MM) VALUE CODE VALUE CODE
H42
W
H
T
S
LD
0.250 Max
0.220 Max
0.270 Max
0.170 ±0.03
0.025 ±.002
(6.35 Max)
(5.59 Max)
(6.86 Max)
(4.32 ±0.76)
(0.64 ±0.05)
500 VDC 4700 pF 472 .150 µF 154
1000 VDC 1500 pF 152 .055 µF 553
2000 VDC 680 pF 681 9000 pF 902
3000 VDC 330 pF 331 2800 pF 282
4000 VDC 150 pF 151 630 pF 631
5000 VDC 100 pF 101 550 pF 531
H47
W
H
T
S
LD
0.370 Max
0.300 Max
0.270 Max
0.275 ±0.03
0.025 ±.002
(9.40 Max)
(7.62 Max)
(6.86 Max)
(6.99 ±0.76)
(0.64 ±0.05)
500 VDC .022 µF 223 .480 µF 484
1000 VDC 3300 pF 332 .170 µF 174
2000 VDC 1500 pF 152 .025 µF 253
3000 VDC 680 pF 681 .011 µF 113
4000 VDC 330 pF 331 1800 pF 182
5000 VDC 220 pF 221 940 pF 941
H51
W
H
T
S
LD
0.470 Max
0.400 Max
0.320 Max
0.375 ±0.03
0.025 ±.002
(12.0 Max)
(10.2 Max)
(8.13 Max)
(9.53 ±0.76)
(0.64 ±0.05)
500 VDC .056 µF 563 1.20 µF 125
1000 VDC 4700 pF 472 .450 µF 454
2000 VDC 3300 pF 332 .094 µF 943
3000 VDC 1500 pF 152 .043 µF 433
4000 VDC 1000 pF 102 .010 µF 103
5000 VDC 470 pF 471 4900 pF 492
H62
W
H
T
S
LD
0.570 Max
0.500 Max
0.320 Max
0.475 ±0.03
0.025 ±.002
(14.5 Max)
(12.7 Max)
(8.13 Max)
(12.1 ±0.76)
(0.64 ±0.05)
500 VDC .100 µF 104 2.20 µF 225
1000 VDC .010 µF 103 .804 µF 804
2000 VDC 6800 pF 682 .240 µF 244
3000 VDC 3300 pF 332 .073 µF 733
4000 VDC 2200 pF 222 .028 µF 283
5000 VDC 1000 pF 102 .013 µF 133
H66
W
H
T
S
LD
0.670 Max
0.600 Max
0.320 Max
0.575 ±0.03
0.025 ±.002
(17.0 Max)
(15.2 Max)
(8.13 Max)
(14.6 ±0.76)
(0.64 ±0.05)
500 VDC .150 µF 154 3.30 µF 335
1000 VDC .015 µF 153 1.20 µF 125
2000 VDC .010 µF 103 .440 µF 444
3000 VDC 4700 pF 472 0.130 µF 134
4000 VDC 3300 pF 332 .041 µF 413
5000 VDC 2200 pF 222 .020 µF 203
See page 79 for additional dielectric specifications.
31
www.johansondielectrics.com
HIGH VOLTAGE RADIAL LEADED CAPACITORS
HOW TO ORDER HIGH VOLTAGE RADIALS
Part number written: 102H42W101KQ4
102 H42 W 101 K Q 4 T
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
501 = 500 V
102 = 1000 V
202 = 2000 V
302 = 3000 V
402 = 4000 V
502 = 5000 V
See Chart
N = NP0
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros.
102 = 1000 pF
103 = 0.01 µF
105 = 1.00 µF
J = ± 5%
K = ± 10%
M = ± 20%
Z = +80% -20%
Q = Leaded &
Encapsulated
4 = Standard
3 = Specified
T = Tape and Reel
H = High Rel Testing
per customer
requirements
S = Special Part
W
H
T
S Meniscus
Height
.050" Max
NOTE: Lead lengths are
typically 1.25” for orders in
bulk packaging. Leads are
typically 1.00” for tape and
reel packaging. Tape and
reel packaging comes in
1000 piece reels.
T-SERIES 20C
Johanson also offers two different series of high temperature radial leaded
capacitors for 200°C. These components feature rugged premolded cases
with Hi-Temp epoxy fill. The 200°C line is offered in voltage ratings of 25V to
4KV and maximum capacitance loss of -0.5% in NP0 and -45% in X7R. The
line is offered in voltage ratings of 50V & 100V with maximum capacitance
loss of -1.5% in NP0 and -55% in X7R. Please visit our website for complete
component selection & specifications
APPLICATIONS
• Oil Well Logging (Downhole)
• Geophysical Probes
• Jet Engine Controls
CASE SIZE
RATED
VOLTAGE
NP0 CAPACITANCE (MAX.) X7R CAPACITANCE (MAX.)
IN. (MM) VALUE CODE VALUE CODE
H70
W
H
T
S
LD
0.770 Max
0.720 Max
0.320 Max
0.675 ±0.03
0.025 ±.002
(19.6 Max)
(18.3 Max)
(8.13 Max)
(17.1 ±0.76)
(0.64 ±0.05)
500 VDC
.220 µF 224 5.70 µF 575
1000 VDC
.022 µF 223 2.10 µF 215
2000 VDC
.015 µF 153 .620 µF 624
3000 VDC
6800 pF 682 .190 µF 194
4000 VDC
4700 pF 472 .054 µF 543
5000 VDC
3300 pF 332 .026 µF 263
H72
W
H
T
S
LD
0.870 Max
0.750 Max
0.320 Max
0.775 ±0.03
0.025 ±.002
(22.1 Max)
(19.1 Max)
(8.13 Max)
(19.7 ±0.76)
(0.64 ±0.05)
500 VDC
.330 µF 334 7.30 µF 735
1000 VDC
.100 µF 104 2.80 µF 285
2000 VDC
.056 µF 563 .800 µF 804
3000 VDC
.033 µF 333 .250 µF 254
4000 VDC
.010 µF 103 .080 µF 803
5000 VDC
6800 pF 682 .041 µF 413
H80
W
H
T
S
LD
1.450 Max
0.720 Max
0.320 Max
1.375 ±0.03
0.025 ±.002
(36.8 Max)
(18.3 Max)
(8.13 Max)
(34.9 ±0.76)
(.064 ±0.05)
500 VDC
.470 µF 474 12.0 µF 126
1000 VDC
.150 µF 154 4.60 µF 465
2000 VDC
.082 µF 823 1.20 µF 125
3000 VDC
.047 µF 473 .390 µF 394
4000 VDC
.015 µF 153 .130 µF 134
5000 VDC
.010 µF 103 .068 µF 683
32
www.johansondielectrics.com
KEY FEATURES
• Temperature Coefficients of ± 2ppm/ºC
• Temperature Range -55°C to +145°C
• Resistance to 6 Mega-Ohms
• Resistance Tolerance starting at ± 0.005%
• Long Term Stability / 100ppm/year
High TCR Available - Platinum & Balco Wire
Matched Resistance Sets to ± 0.001 and ± 0.5 ppm/ºC
100% Acceptance Tested
Options available: Wide TCR Range, High Stability and Fast
Rise Time
APPLICATIONS
• Smart Grid Metering • Engine Sensors
• Power Inverters • Temperature Sensors
PRODUCT SERIES
(RWP)
RESISTANCE
(Ω)
POWER RATING
(W) TOLERANCE 1TEMPERATURE
COEFFICIENT
TEMPERATURE
RANGE 1
Radial Up to 1M 0.125 to 0.500
± 0.005% to
1%
>100Ω : ± 10ppm/°C
10Ω to100Ω : ±
20ppm/°C
<10Ω : ± 30ppm/°C
- 55ºC to + 145ºC
Axial Up to 6M 0.06 to 2.00
1 See Power Derating Curve
180
160
140
120
100
80
60
40
20
00 20 40 60 80 100 120 140 160
1% / 0.5% / 0.1% Tolerance
0.05% / 0.02% Tolerance
0.01% Tolerance
0.005% Tolerance
Power Derating Curve
Rated Power ( % )
Ambient Temperature (°C)
AVAILABLE OPTIONS
(Consult Factory)
HOW TO ORDER
Example P/N: RWPA01W038K0FS is Resistor Wirewound Precision 0.06W, 75V, ±10ppm/°C 38.0KΩ, ±1.0%, bulk
PRODUCT SUMMARY
Wide TCR Range: Low and High TC
configurations from -20ppm/ºC to +6000ppm/ºC.
Down to 1ppm/ºC available.
High Stability: High stability version with maximum
resistance change of ± 20ppm/year under normal
conditions.
Fast Rise Time: Low reactance design for fast rise
time and extended frequency response.
Special Testing Requirements
Special Pulse Requirements
For Tin/Lead coated leads, add “-Pb to part number.
RWP A01 W 038K0 F S
RESISTOR WIREWOUND
PRECISION
PACKAGE CODE,
WATTS, VOLTAGE
TEMPERATURE COEFFICIENT
OF RESISTANCE (TCR)
RESISTANCE TOLERANCE PACKING
Radial
B01, 0.125W, 150Vmax
B02, 0.250W, 150Vmax
Axial
A01, 0.06W, 75Vmax
A02, 0.08W, 100Vmax
See Table
W = ± 10ppm/ºC
U = ± 20ppm/ºC
S = ± 30ppm/ºC
Z = special
0R038 = 0.038Ω
003K8 = 3.8KΩ
038K0 = 38.0KΩ
380K0 = 380.0KΩ
003M8 = 3.8MΩ
Letter denotes decimal place.
R = decimal., “K” 103, “M” 106
Remaining 4 digits are
significant or placeholders
V = ± 0.005%
T = ± 0.01%
Q = ± 0.02%
A = ± 0.05%
B = ± 0.1%
F = ± 1.0%
S = Bulk
T = Tape & Reel
RESISTOR WIREWOUND PRECISION
RWP SERIES
Standard Termination Finish: Matte Tin(Sn)
33
www.johansondielectrics.com
AXIAL
RADIAL
Package Code B01 B02 B03 B04
Max Resistance (Ω) 500k 750k 500k 1M
Max Working Voltage (V) 150 150 150 150
Power Rating (W) 0.125 0.250 0.300 0.500
Dimensions
Inches [mm]
Width
±0.010”
[±0.25mm]
0.140
[3.56]
0.150
[3.81]
0.102
[2.59]
0.160
[4.06]
Height
±0.025”
[±0.64mm]
0.250
[6.35]
0.270
[6.86]
0.320
[8.13]
0.525
[13.34]
Length
±0.010”
[±0.25mm]
0.270
[6.86]
0.540
[13.72]
0.300
[7.62]
0.585
[14.86]
Lead Diam-
eter 1
±0.002”
[±0.05mm]
0.032
[0.81]
0.032
[0.81]
0.025
[0.64]
0.032
[0.81]
Lead Spacing
±0.015”
[±0.4mm]
0.125
[3.18]
0.250
[6.35]
0.150
[3.81]
0.400
[10.16]
Radial Dimensions
Axial Dimensions
2 Lead Length 1.50” [38.10mm] Min
1 Lead Length 1.00” [25.40mm] Min
Package Code A01 A02 A03 A04 A05 A06 A07 A08 A09 A10 A11 A12
Max Resistance (Ω) 75k 150k 150k 250k 250k 400k 500k 500k 750k 750k 1M 1M
Max Working Voltage (V) 75 100 100 100 100 150 150 100 200 200 200 200
Power Rating (W) 0.06 0.08 0.08 0.10 0.10 0.12 0.15 0.15 0.175 0.20 0.20 0.20
Dimensions
Inches [mm]
Length
±0.025”
[±0.64mm]
0.210
[5.33]
0.260
[6.60]
0.260
[6.60]
0.375
[9.53]
0.312
[7.92]
0.250
[6.35]
0.295
[7.49]
0.250
[6.35]
0.375
[9.53]
0.450
[11.43]
0.375
[9.53]
0.375
[9.53]
Diameter
±0.005”
[±0.13mm]
0.100
[2.54]
0.125
[3.18]
0.125
[3.18]
0.125
[3.18]
0.156
[3.96]
0.187
[4.75]
0.187
[4.75]
0.250
[6.35]
0.187
[4.75]
0.187
[4.75]
0.250
[6.35]
0.250
[6.35]
Lead
Diameter
2
±0.002”
[±0.05mm]
0.020
[0.51]
0.020
[0.51]
0.025
[0.64]
0.020
[0.51]
0.020
[0.51]
0.025
[0.64]
0.025
[0.64]
0.025
[0.64]
0.025
[0.64]
0.025
[0.64]
0.032
[0.81]
0.025
[0.64]
Package Code A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23
Max Resistance (Ω) 1M 1.2M 1.2M 2.5M 2.5M 3.8M 3.8M 6M 6M 6M 6M
Max Working Voltage (V) 250 300 300 400 400 300 400 600 800 900 1000
Power Rating (W) 0.25 0.25 0.25 0.33 0.33 0.40 0.50 0.75 1.00 1.50 2.00
Dimensions
Inches [mm]
Length
±0.025”
[±0.64mm]
0.465
[11.81]
0.500
[12.70]
0.500
[12.70]
0.750
[19.05]
0.750
[19.05]
0.500
[12.70]
0.750
[19.05]
1.000
[25.40]
1.000
[25.40]
1.500
[38.10]
2.000
[50.80]
Diameter
±0.005”
[±0.13mm]
0.210
[5.33]
0.250
[6.35]
0.250
[6.35]
0.250
[6.35]
0.250
[6.35]
0.375
[9.53]
0.375
[9.53]
0.375
[9.53]
0.500
[12.70]
0.500
[12.70]
0.500
[12.70]
Lead
Diameter 2
±0.002”
[±0.05mm]
0.025
[0.64]
0.032
[0.81]
0.025
[0.64]
0.032
[0.81]
0.025
[0.64]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
Moisture Sensitivity Level: MSL-1
Moisture Sensitivity Level: MSL-1
This datasheet is subject to change without notice.
RESISTOR WIREWOUND PRECISION
RWP SERIES
34
www.johansondielectrics.com
PRODUCT SUMMARY
PRODUCT
SERIES
(RWF)
RESISTANCE
RANGE (Ω) 1
POWER
RATING (W)
@ 70 ºC
DIELECTRIC
STRENGTH TOLERANCE
TEMPERATURE
COEFFICIENT
TEMPERATURE
RANGE
INSULATION
RESISTANCE
C1 0.01 to 400 0.5
1000 VAC
± 0.01%
to
± 5%
>10Ω : ± 20ppm/°C
1Ω to 10Ω : ±
50ppmºC
<1Ω : Call Factory
- 55°C
to
+ 275°C
>1000
MOhms / Dry
C2 0.005 to 3k 1
C3 0.01 to 15k 2
C4 0.01 to 25k 3
C5 0.01 to 50k 4
D1 0.005 to 0.05 1
500 VAC
± 0.1%
to
± 5%
± 200ppm/°C
Call Factory For Lower
D2 0.005 to 0.07 2
Power Derating Curve
Ambient Temperature (ºC)
Rated Power (%)
1 For non-inductive windings, divide max resistance by 2
Example P/N: RWFNC4U380R0BE is Resistor Wirewound Precision SMT Non-Inductive, 3.0W, ±20ppm/°C, 380Ω, ±0.1%, embossed tape &
reel
0 50 100 150 200 250 300 350
0
20
40
60
80
100
120
Maximum Working Voltage =
HOW TO ORDER
AVAILABLE OPTIONS
(Consult Factory)
For Tin/Lead coated leads, add “- Pb to part number.
KEY FEATURES
• Resistance from 0.005 to 50kOhms
• Precision, Flame Proof and Pulse Withstanding
• Tolerance to ± 0.01%
• High Power to 4 Watts
• Flame Resistant UL 94V-0
Superior Surge Handling Capability
High Temperature Rating up to 275º
Low Temperature Coefficient to ± 20ppm/ºC
Non-Inductive Windings available
APPLICATIONS
• Motor Control • Power Supplies
• Braking Systems • Pressure Transducers
Special Testing Requirements
Special Pulse Requirements
RWF N C4 U 380R0 B E
RESISTOR
WIREWOUND SMT
WINDINGS PACKAGE CODE,
WATTS, RESISTANCE
TEMPERATURE COEFFICIENT
OF RESISTANCE (TCR)
RESISTANCE TOLERANCE PACKING
S = Standard
N = Non-
Inductive
C1, 0.5W, [0.01 to 400]Ω
C2, 1.0W, [0.005 to 3k]Ω
C3, 2.0W, [0.01 to 15k]Ω
C4, 3.0W, [0.01 to 25k] Ω
C5, 4.0W, [0.01 to 50k]Ω
D1, 1.0W, [0.005 to 0.05]Ω
D2, 2.0W, [0.005 to 0.07]Ω
U = ± 20ppm/ºC
Q= ± 50PPM/ºC
L = ± 200ppm/ºC
Z = special
0R038 = 0.038Ω
003K8 = 3.8KΩ
038K0 = 38.0KΩ
380K0 = 380.0KΩ
003M8 = 3.8M Ω
Letter denotes decimal place.
R = decimal., “K” 103, “M” 106
Remaining 4 digits are
significant placeholders
T = ± 0.01%
Q = ± 0.02%
A = ± 0.05%
B = ± 0.1%
F = ± 1.0%
J = ± 5.0%
E = Embossed
Tape & Reel
RESISTOR WIREWOUND PRECISION SMT
RWF SERIES
Standard Termination Finish: Electroless Tin
35
www.johansondielectrics.com
Package Code C1 C2 C3 C4 C5 D1 D2
Dimensions
Inches [mm]
A (Tolerances)
±0.015” [±0.4mm]
0.190
[4.83]
0.260
[6.60]
0.450
[11.43]
0.625
[15.83] 0.820 [20.83] 0.260
[6.60] 0.450 [11.43]
B (Tolerances)
±0.015” [±0.4mm]
0.130[
3.30]
0.155
[3.94] 0.250 [6.35] 0.270[6.86] 0.295 [7.49] 0.155
[3.94] 0.250 [6.35]
C (Tolerances)
±0.015” [±0.4mm]
0.110
[2.79]
0.125
[3.18] 0.180 [4.57] 0.250 [6.35] 0.305 [7.75] 0.100
[2.54] 0.100 [2.54]
D (Tolerances)
±0.015” [±0.4mm]
0.060
[1.52] 0.070[1.78] 0.120 [3.05] 0.120 [3.05] 0.150 [3.81] 0.070
[1.78] 0.120 [3.05]
F (Tolerances)
±0.015” [±0.4mm]
0.040
[1.02]
0.070
[1.78] 0.100 [2.54] 0.135 [3.43] 0.190 [4.83] 0.070
[1.78] 0.100 [2.54]
Stand-Off
Inches [mm]
E (Tolerances)
±0.015” [±0.4mm]
0.100
[2.54]
0.120
[3.05] 0.190 [4.83] 0.150 [3.81] 0.245 [6.22] 0.120
[3.05] 0.190 [4.83]
Height (Tolerances)
±0.005”[±0.13mm]
0.005
[0.13]
0.005
[0.13] 0.005 [0.13] 0.005 [0.13] 0.005 [0.13] 0.005
[0.13] 0.005 [0.13]
Solder Pad
Inches [mm]
Width (Tolerances)
±0.015” [±0.4mm]
0.062
[1.57]
0.096
[2.44] 0.150 [3.81] 0.200 [5.08] 0.220 [5.59] 0.096
[2.44] 0.150 [3.81]
Height (Tolerances)
±0.015” [±0.4mm]
0.100
[2.54]
0.150
[3.81] 0.200 [5.08] 0.220 [5.59] 0.250 [6.35] 0.150
[3.81] 0.200 [5.08]
Length (Tolerances)
±0.015” [±0.4mm]
0.250
[6.35]
0.337
[8.56]
0.540
[13.72]
0.700
[17.78] 0.900 [22.86] 0.337
[8.56] 0.540 [13.72]
This datasheet is subject to change without notice.
Package Code C1 C2 C3 C4 C5 D1 D2
Reel/Tape Width [mm] 12 16 24 24 32 16 24
Small 650 600 250 125 180 600 250
Large 3000 2000 1000 500 500 2000 1000
Humidity Packaging Notes:
Moisture Barrier Bags (MBB) are used to package surface mount components. These bags include a dessicant and a Humidity
Indicator Card to monitor humidity levels. All bags are marked with Moisture-Sensitive Identification Labels.
A Moisture Sensitivity Level (MSL) rating of 2 (1-year floor life) applies to the Johanson RWF Series.
Environmental Performance (MIL-STD 202) DR Maximum
Load Life ±1% + 0.05 Ω
Moisture Resistance
Dielectric ±0.5% + 0.05 Ω
Storage
Shock
±0.5% + 0.05 Ω
Thermal Shock
5X Overload (5s)
Resistance to Heat Solder (260C, 10s)
MECHANICAL CHARACTERISTICS
ENVIRONMENTAL PERFORMANCE
PACKAGING INFORMATION
RESISTOR WIREWOUND PRECISION SMT
RWF SERIES
Lead Thickness 0.006 [.015mm] Tolerances ±0.002” [±0.05mm]
36
www.johansondielectrics.com
PRODUCT SUMMARY
PRODUCT SERIES
(RWH)
POWER RATING
(W)
DIELECTRIC
STRENGTH TOLERANCE
TEMPERATURE
COEFFICIENT
TEMPERATURE
RANGE
Miniature Axial 1 to 15
500 VAC:
E01, E02, E03,
E04, E05, E06
1000 VAC:
All Others
± 0.01%
to
± 10%
(1% Standard)
>10Ω : ± 20ppm/°C
1Ω to 10Ω : ± 50ppm/°C
<1Ω : Call Factory
-55°C to + 250°C
Axial 0.1 to 15
500 VAC:
F01, F02, F03,
F04, F05, F06, F07
1000 VAC:
All Others
Characteristic U:
-55°C to + 275°C
Characteristic V:
-55°C to + 350°C
Example P/N: RWHSE02TU003K8FS is Resistor Wirewound High Power, Standard, 1.0W, 33V, -55ºC to +250ºC, ±20ppm/ºC, 3.8KΩ, ±1.0%, bulk
HOW TO ORDER
For Tin/Lead coated leads, add "- Pb" to part number.
KEY FEATURES
• Excellent Pulse Handling
• Resistance Tolerances to ± 0.01%
• Resistance from 0.02 to 260kOhms
• MIL-R-26 / MIL-R-39007 Power Ratings
• Low TCR: ± 20ppm/ ºC Standard
Non-Inductive Windings available
APPLICATIONS
• HDVC Systems • Power Supplies
• Braking Systems • Fluid Heater
RWH S E02 T U 003K8 F S
RESISTOR
WIREWOUND
HIGH POWER
WINDINGS PACKAGE CODE,
WATTS, RESISTANCE
OPERATING
TEMPERATURE
TEMPERATURE
COEFFICIENT OF
RESISTANCE (TCR)
RESISTANCE TOLERANCE PACKING
S = Standard
N = Non-
Inductive
Miniature Axial
E01, 1.0W, 33Vmax
E02, 1.0W, 33Vmax
Axial
F01, 0.1W, 8.5Vmax
F02, 0.4W, 20Vmax
See Table
T = -55ºC to +250ºC
U = -55ºC to +275ºC
V = -55ºC to +350ºC
U = ± 20ppm/°C
Q = ± 50ppm/°C
Z = Special
0R038 = 0.038Ω
003K8 = 3.8KΩ
038K0 = 38.0KΩ
380K0 = 380.0KΩ
003M8 = 3.8MΩ
Letter denotes
decimal place.
R = decimal.,“K” 103,“M” 106
Remaining 4 digits
are significant or
placeholders.
T= ± 0.01%
Q= ± 0.02%
A= ± 0.05%
B= ± 0.1%
F= ± 1.0%
J= ± 5.0%
K= ± 10.0%
S = Bulk
T = Tape &
Reel
RESISTOR WIREWOUND HIGH POWER RATING
RWH SERIES
Standard Termination Finish: Matte Tin (Sn)
37
www.johansondielectrics.com
Package Code E01 E02 E03 E04 E05 E06 E07 E08 E09
Max Resistance (Ω) 13.4k 3.4k 7.5k 7.5k 10k 10k 12.5k 25k 32k
Max Working Voltage (V) 33 33 42 42 80 80 135 162 194
Power Rating (W) 1 1 1.5 1.5 2 2 3 4 5
Dimensions
Inches [mm]
A
±0.062”
[±1.57mm]
0.250
[6.35]
0.250
[6.35]
0.312
[7.92]
0.312
[7.92]
0.406
[10.31]
0.406
[10.31]
0.350
[8.89]
0.560
[14.22]
0.500
[12.70]
B
±0.031”
[±0.79mm]
0.085
[2.16]
0.085
[2.16]
0.078
[1.98]
0.078
[1.98]
0.094
[2.39]
0.094
[2.39]
0.156
[3.96]
0.187
[4.75]
0.218
[5.54]
C 2
±0.002”
[±0.05mm]
0.020
[0.51]
0.025
[0.64]
0.020
[0.51]
0.025
[0.64]
0.025
[0.64]
0.020
[0.51]
0.032
[0.81]
0.032
[0.81]
0.040
[1.02]
MIL-R-26 / MIL-R-39007 RW-81
RWR-81
RW-81
RWR-81 RWR-82 RWR-82 RW-80
RWR-80
RW-80
RWR-80
Package Code E10 E11 E12 E13
Max Resistance (Ω) 150k 95k 150k 260k
Max Working Voltage
(V) 258 425 607 1050
Power Rating (W) 6 7 10 15
Dimensions
Inches [mm]
A
±0.062”
[±1.57mm]
0.625
[15.88]
0.875
[22.23]
1.220
[30.99]
1.780
[45.21]
B
±0.031”
[±0.79mm]
0.250
[6.35]
0.312
[7.92]
0.312
[7.92]
0.375
[9.53]
C 2
±0.002”
[±0.05mm]
0.040
[1.02]
0.040
[1.02]
0.040
[1.02]
0.040
[1.02]
MIL-R-26 / MIL-
R-39007 RW-84
MINIATURE AXIAL
0 -50 0 50 100 150 200 250 300
0
20
40
60
80
100
120
Rated Power ( % )
Ambient Temperature (°C)
Power Derating Curve
1 For non-inductive windings / divide maximum resistance by 2
2 Lead Diameter:
18 AWG = 0.040" / 20 AWG = 0.032” /22 AWG = 0.025" / 24 AWG = 0.020"
RESISTOR WIREWOUND HIGH POWER RATING
RWH SERIES
38
www.johansondielectrics.com
AXIAL
Package Code F01 F02 F03 F04 F05 F06 F07 F08 F09 F10
Max Resistance (Ω) 1500 2.5k 2.5k 7.5k 7.5k 10k 10k 12.5k 22k 22k
Max Working Voltage (V) 8.5 20 20 29 29 52 52 60 130 140
Power
Rating (W)
U0.1 0.4 0.4 0.75 0.75 1.0 1.0 1.5 2.5 3.0
V0.25 0.5 0.5 0.9 0.9 1.5 1.5 2.0 3.0 3.75
Dimensions
Inches [mm]
A
±0.062”
[±1.57mm]
0.150
[3.81]
0.250
[6.35]
0.250
[6.35]
0.330
[8.38]
0.330
[8.38]
0.406
[10.31]
0.406
[10.31]
0.350
[8.89]
0.500
[12.70]
0.560
[14.22]
B
±0.031”
[±0.79mm]
0.078
[1.98]
0.094
[2.39]
0.094
[2.39]
0.094
[2.39]
0.094
[2.39]
0.094
[2.39]
0.094
[2.39]
0.156
[3.96]
0.187
[4.75]
0.187
[4.75]
C 2
±0.002”
[±0.05mm]
0.018
[0.45]
0.020
[0.51]
0.025
[0.64]
0.020
[0.51]
0.025
[0.64]
0.020
[0.51]
0.025
[0.64]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
MIL-R-26 / MIL-R-39007 RW-70 RW-70 RW-69 RW-79
Package Code F11 F12 F13 F14 F15 F16 F17 F18 F19 F20
Max Resistance (Ω) 140k 40k 30k 45k 45k 91k 65k 95k 150k 100k
Max Working Voltage (V) 140 140 140 210 210 360 390 504 650 590
Power
Rating (W)
U3.0 3.0 3.0 4.0 4.0 5.0 5.0 5.0 7.0 7.0
V4.0 4.0 3.5 5.5 5.5 6.5 6.5 6.5 9.0 9.0
Dimensions
Inches [mm]
A
±0.062”
[±1.57mm]
0.500
[12.70]
0.500
[12.70]
0.500
[12.70]
0.675
[17.15]
0.675
[17.15]
0.875
[22.23]
0.970
[24.64]
1.025
[26.04]
1.375
[34.93]
1.400
[35.56]
B
±0.031”
[±0.79mm]
0.250
[6.35]
0.250
[6.35]
0.200
[5.08]
0.270
[6.68]
0.270
[6.68]
0.312
[7.92]
0.250
[6.35]
0.312
[7.92]
0.375
[9.52]
0.312
[7.92]
C 2
±0.002”
[±0.05mm]
0.040
[1.02]
0.032
[0.81]
0.032
[0.81]
0.040
[1.02]
0.032
[0.81]
0.040
[1.02]
0.032
[0.81]
0.040
[1.02]
0.040
[1.02]
0.032
[0.81]
MIL-R-26 / MIL-R-39007 RW-74 RW-67
Package Code F21 F22 F23
Max Resistance (Ω) 1154k 260k 320k
Max Working Voltage (V) 620 850 1500
Power
Rating (W)
U7.0 10 15
V9.0 13 -
Dimensions
Inches [mm]
A
±0.062”
[±1.57mm]
1.200
[30.99]
1.780
[45.21]
1.810
[45.95]
B
±0.031”
[±0.79mm]
0.312
[7.92]
0.375
[9.52]
0.510
[12.95]
C 2
±0.002”
[±0.05mm]
0.040
[1.02]
0.040
[1.02]
0.050
[1.27]
MIL-R-26 / MIL-R-39007 RW-78
1 For non-inductive windings / divide maximum resistance by 2
2 Lead Diameter:
18 AWG = 0.040" / 20 AWG = 0.032” / 22 AWG = 0.025" /
24 AWG = 0.020" / 25 AWG = 0.018"
Ambient Temperature (°C)
0 50 100 150 200 250 300 350 400
0
20
40
60
80
100
120
Rated Power ( % )
CHAR U
CHAR V
Power Derating Curve
RESISTOR WIREWOUND HIGH POWER RATING
RWH SERIES
39
www.johansondielectrics.com
ENVIRONMENTAL PERFORMANCE
PACKAGING INFORMATION
Package Code F01 F02 F03 F04 F05 F06 F07 F08 F09 F10 F11 F12 F13
Bulk Bulk
Only.
No
T&R
1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
10" Reel 2000 2000 2000 2000 2000 2000 2000 500 500 500 500 500
12" Reel 3000 3000 3000 3000 3000 3000 3000 1500 1500 1000 1000 1000
14" Reel 5000 5000 5000 5000 5000 5000 5000 3000 3000 1500 1500 1500
Package Code F14 F15 F16 F17 F18 F19 F20 F21 F22
Bulk 1000 1000 1000 1000 1000 1000 1000 1000 1000
10" Reel N/A N/A N/A 500 N/A N/A N/A N/A N/A
12" Reel 500 500 500 1000 500 500 500 500 500
14" Reel 1000 1000 1000 1500 1000 750 750 750 750
Environmental Performance
(MIL-STD 202)
DR
Miniature Axial Axial - Characteristic U Axial - Characteristic V
Vibration ±0.1 % + 0.05 Ω ±0.1% + 0.05 Ω ±0.2% + 0.05 Ω
Load Life
To 1% Depending on
Resistance Value and
Size
± 1% + 0.05 Ω ±3% + 0.05 Ω
Moisture Resistance ±0.2 % + 0.05 Ω ±0.2% + 0.05 Ω ±2% + 0.05 Ω
Dielectric ±0.2 % + 0.05 Ω ±0.2% + 0.05 Ω ±0.2% + 0.05 Ω
Storage ±0.2 % + 0.05 Ω ±0.2% + 0.05 Ω ±2% + 0.05 Ω
Shock ±0.1 % + 0.05 Ω ±0.1% + 0.05 Ω ±0.2% + 0.05 Ω
Thermal Shock ±0.2 % + 0.05 Ω ±0.2% + 0.05 Ω ±2% + 0.05 Ω
5X Overload (5s) ±0.2 % + 0.05 Ω ±0.2% + 0.05 Ω ±2% + 0.05 Ω
CONSTRUCTION NOTES:
Centerless ground ceramic core
Tinned copper or copperweld leads
All welded terminations
High Temperature / trivalent / inorganic silicone coating
MINIATURE AXIAL: Bulk Only
AXIAL:
This datasheet is subject to change without notice.
Moisture Sensitivity Level: MSL-1
AVAILABLE OPTIONS
(Consult Factory)
Special Testing Requirements
Special Pulse Requirements
RESISTOR WIREWOUND HIGH POWER RATING
RWH SERIES
40
www.johansondielectrics.com
PRODUCT
SERIES
(RWC)
RESISTANCE
RANGE (Ω) 1
POWER RATING
(W @ 25ºC)
DIELECTRIC
STRENGTH
TEMPERATURE
COEFFICIENT
TEMPERATURE
RANGE
FREE
AIR COMMERCIAL MIL
G1 0.01 to 22K 4.5 7.5 a 5 a 1500 VAC >10Ω: ± 20ppm/ºC
1Ω to 10Ω: ± 50ppm/ºC
<1Ω: Call Factory
- 55ºC to + 275ºC
G2 0.01 to 47K 7.5 12.5 a10 a1500 VAC
G3 0.01 to 90K 12 25 b20 b2500 VAC
G4 0.01 to 250K 20 50 c30 c3500 VAC
Example P/N: RWCNG1U003K8FS is Resistor Wirewound Chassis Mount, Non-Inductive, 7.5W, ±20ppm/ºC, 3.8KΩ, ±1.0%, bulk
1 For non-inductive windings, divide maximum resistance by 2
a Heatsink required: 0.040 [1.0] Aluminum Plate, 129 in2 [832 cm2] or equiv.
b Heatsink required: 0.040 [1.0] Aluminum Plate, 167 in2 [1077 cm2] or
equiv.
c Heatsink required: 0.059 [1.5] Aluminum Plate, 291 in2 [1877 cm2] or
equiv.
d Heatsink required: 0.125 [3.2] Aluminum Plate, 294in2 [1896cm2] or equiv.
e Heatsink required: 0.125 [3.2] Aluminum Plate, 895 in2 [5780 cm2] or
equiv.
TOLERANCE: ± 0.01 to ± 10% (1% Standard)
HOW TO ORDER
For Tin/Lead coated leads, add "- Pb" to part number.
KEY FEATURES
• Resistances from 0.005 to 250kOhms
• Tolerance to ± 0.01%
• High Temperature: -55ºC to +275ºC
• Low TCR: ± 20ppm/ ºC
• Power Rating 5 to 300 Watts
Excellent Pulse Handling
Non-Inductive windings available
Four Terminal Versions Available (Call Factory)
APPLICATIONS
• Motor Control • Welding
• Braking Systems • X-Ray
PRODUCT SUMMARY
AVAILABLE OPTIONS
(Consult Factory)
RWC NG1 U 003K8 F S
RESISTOR WIRE-
WOUND CHASSIS
MOUNT
WINDINGS PACKAGE CODE,
WATTS (COMMERCIAL),
RESISTANCE
TEMPERATURE
COEFFICIENT OF
RESISTANCE (TCR)
RESISTANCE TOLERANCE PACKING
S = Standard
N = Non-Inductive
G1, 7.5W, [0.01 to 22k]Ω
G2, 12.5W, [0.01 to 47k]Ω
G3, 25.0W, [0.01 to 90k]Ω
G4, 50.0W, [0.01 to 250k]Ω
U = ± 20ppm/°C
Q = ± 50ppm/°C
Z = Special
038R0 = 38Ω
003K8 = 3.8KΩ
038K0 = 38.0KΩ
380K0 = 380.0KΩ
003M8 = 3.8MΩ
Letter denotes
decimal place.
R = decimal., “K” 103, “M” 106
Remaining 4 digits are
significant or placeholders.
T= ± 0.01%
Q= ± 0.02%
A= ± 0.05%
B= ± 0.1%
F= ± 1.0%
J= ± 5.0%
K= ± 10.0%
S = Bulk
Special Testing Requirements
Special Pulse Requirements
RESISTOR WIREWOUND CHASSIS MOUNT
RWC SERIES
Standard Termination Finish: Matte Tin (Sn)
41
www.johansondielectrics.com
Package Code G1 G2 G3 G4
Dimensions
Inches [mm]
A (Tolerances)
±0.005 [±0.13 mm] 0.444 [11.28] 0.562 [14.27] 0.719 [18.26] 1.563 [39.70]
B (Tolerances)
±0.005 [±0.13 mm] 0.490 [12.45] 0.625 [15.88] 0.781 [19.84] 0.844 [21.44]
C (Tolerances)
±0.031 [±0.79 mm] 0.600 [15.24] 0.750 [19.05] 1.062 [26.97] 1.968 [49.99]
D (Tolerances)
±0.062 [±1.57 mm] 1.125 [28.58] 1.320 [33.53] 1.870 [47.50] 2.760 [70.10]
E (Tolerances)
±0.015 [±0.38 mm] 0.334 [8.48] 0.430 [10.92] 0.530 [13.46] 0.615 [15.62]
F (Tolerances)
±0.015 [±0.38 mm] 0.646 [16.41] 0.800 [20.32] 1.080 [27.43] 1.140 [28.96]
G (Tolerances)
±0.015 [±0.38 mm] 0.320 [8.13] 0.400 [10.16] 0.560 [14.22] 0.615 [15.62]
H (Tolerances)
±0.010 [±0.25 mm] 0.065 [1.65] 0.075 [1.91] 0.085 [2.16] 0.085 [2.16]
J (Tolerances)
±0.010 [±0.25 mm] 0.140 [3.56] 0.190 [4.83] 0.260 [6.60] 0.300 [7.62]
K (Tolerances)
±0.010 [±0.25 mm] 0.078 [1.98] 0.093 [2.36] 0.172 [4.37] 0.196 [4.98]
L (Tolerances)
±0.005 [±0.13 mm] 0.093 [2.36] 0.093 [2.36] 0.125 [3.18] 0.125 [3.18]
M (Tolerances)
±0.015 [±0.38 mm] 0.078 [1.98] 0.102 [2.60] 0.125 [3.18] 0.125 [3.18]
N (Tolerances)
±0.006 [±0.15 mm] 0.050 [1.27] 0.080 [2.03] 0.080 [2.03] 0.080 [2.03]
O (Tolerances)
±0.062 [±1.57 mm] 0.266 [6.76] 0.312 [7.93] 0.438 [11.13] 0.438 [11.13]
P (Tolerances)
±0.031 [±0.79 mm] 0.245 [6.22] 0.312 [7.92] 0.391 [9.93] 0.422 [10.72]
Q (Tolerances)
±0.002 [±0.05 mm] 0.051 [1.30] 0.098 [2.49] 0.098 [2.49] 0.098 [2.49]
R (Tolerances)
±0.031 [±0.79 mm] 0.085 [2.16] 0.160 [4.06] 0.185 [4.70] 0.185 [4.70]
MIL-R-39009 / MIL-R-18546 RER-60 / RE-60 RER-65 / RE-65 RER-70 / RE-70 RER-75 / RE-75
MECHANICAL CHARACTERISTICS
RESISTOR WIREWOUND CHASSIS MOUNT
RWC SERIES
42
www.johansondielectrics.com
ENVIRONMENTAL PERFORMANCE
Environmental Performance (MIL-STD 202) DR
Vibration ± 0.1 % + 0.05 Ω
Load Life ± 1% + 0.05 Ω
Moisture Resistance ± 0.2 % + 0.05 Ω
Dielectric ± 0.2 % + 0.05 Ω
Storage ± 0.2 % + 0.05 Ω
Shock ± 0.1 % + 0.05 Ω
Thermal Shock ± 0.2 % + 0.05 Ω
5X Overload (5s) ± 0.2 % + 0.05 Ω
CONSTRUCTION NOTES:
Centerless ground ceramic core
Tinned copper or copperweld leads
All welded terminations
High Temperature epoxy molding compound
Anodized aluminum housing
0 50 100 150 200 250 300 350
0
20
40
60
80
100
120
Rated Power ( % )
Ambient Temperature (°C)
Mounted on Heatsink
G1 & G2
G3
G4
Power Derating Curve
Free-Air Derating:
G1, G2, G3, G4
This datasheet is subject to change without notice.
Moisture Sensitivity Level: MSL-1
RESISTOR WIREWOUND CHASSIS MOUNT
RWC SERIES
43
www.johansondielectrics.com
PRODUCT SUMMARY
PACKAGE
SIZE
STANDARD POWER RATING (PAGE 44) HIGH POWER RATING (PAGE 45)
RESISTANCE RANGE
(Ω)
POWER RATING (W)
AT 70ºC
RESISTANCE RANGE
(Ω)
POWER RATING (W)
AT 70ºC
0402 1 - 511K 0.0625 - -
0603 1 - 1M 0.0625 4.7 - 1M 0.100
0805 1 - 2M 0.100 1 - 1M 0.125
1206 1 - 2.49M 0.125 4.7 - 1M 0.250
2010 1 - 3M 0.250 4.7 - 1M 0.333
2512 1 - 3M 0.500 1 - 2K 0.750
Example P/N:
RNP14HW003K8BE is Resistor Thin Film Precision, 0603 size, high power rating, ±10ppm/ºC, 3.8KΩ, ±0.1%, embossed tape & reel
HOW TO ORDER
0 20 40 60 70 80 100 120 140
0
20
40
60
80
100
155
Power Derating Curve
Rated Power ( % )
Ambient Temperature (°C)
AVAILABLE OPTIONS
(Consult Factory)
RNP 14 HW 003K8 B T
RESISTOR THIN FILM
PRECISION
PACKAGE
CODE
POWER RATING TEMPERATURE
COEFFICIENT OF
RESISTANCE (TCR)
RESISTANCE TOLERANCE PACKING
07 = 0402
14 = 0603
15 = 0805
18 = 1206
19 = 2010
20 = 2512
S = Standard
H = High Power
X = ± 5ppm/°C
W = ± 10ppm/°C
V = ± 15ppm/ºC
T = ± 25ppm/ºC
Q = ± 50ppmºC
038R0 = 38Ω
003K8 = 3.8KΩ
038K0 = 38.0KΩ
380K0 = 380.0KΩ
003M8 = 3.8MΩ
Letter denotes
decimal place.
R = decimal.
, “K” 103, “M” 10
6
Remaining 4 digits are
significant or placeholders.
T = ± 0.01%
A = ± 0.05%
B = ± 0.1%
C = ± 0.25%
D = ± 0.5%
F = ±1.0%
T = Paper
Tape
KEY FEATURES
• Resistances from 1 Ohm to 3M Ohms
• Resistance Tolerances to ± 0.01%
• Power Rating 0.06 to 0.75 watts
• TCR’s up to ± 5ppm/ºC
• Operating Temperature: - 55ºC to 155ºC
Available in sizes 0402,0603, 0805, 1206, 2010, 2512
APPLICATIONS
• Motor Control • Smart Grid Metering
• Precision Scales • Temperature Sensors
Special Testing Requirements
RESISTOR THIN FILM PRECISION
RNP SERIES
Standard Termination Finish: Nickel Tin Alloy
44
www.johansondielectrics.com
STANDARD POWER RATING SPECIFICATIONS
Standard
Package Size Size 0402
(RNP07S)
Size 0603
(RNP14S)
Size 0805
(RNP15S)
Max Working
Voltage (V) 125V 50V 100V
Max Overload
Voltage (V) 250V 100V 200V
Power Rating (W)
at 70ºC 0.0625 0.0625 0.100
TCR PPM/°C ±5 ±10 ±15 ±25 ±50 ±5 ±10 ±15 ±25 ±50 ±5 ±10 ±15 ±25 ±50
Resistance
Range
(Ω)
±0.01%
Tolerance
49.9Ω
to
4.99KΩ
49.9Ω to
12KΩ
-
24.9Ω
to
15KΩ
24.9Ω to 100KΩ-
24.9Ω
to
30KΩ
24.9Ω to 200KΩ-
±0.05%
Tolerance 49.9Ω to 12KΩ4.7Ω to 332KΩ
4.7Ω
to
1MΩ
4.7Ω to
1MΩ
±0.1%
Tolerance
49.9Ω
to
60KΩ
49.9Ω
to
69.8KΩ
10Ω to 255KΩ
4.7Ω
to
511KΩ
4.7Ω to 1MΩ4.7Ω to
2MΩ
±0.25%
Tolerance
4.7Ω to 511KΩ
1Ω
to
1MΩ
1Ω
to
1MΩ
1Ω to 2MΩ
±0.5%
Tolerance
±1%
Tolerance
Standard
Package Size
Size 1206
(RNP18S)
Size 2010
(RNP19S)
Size 2512
(RNP20S)
Max Working
Voltage (V) 1150V 150V 150V
Max Overload
Voltage (V) 2300V 300V 300V
Power Rating (W)
at 70ºC 0.125 0.250 0.500
TCR PPM/°C ±5 ±10 ±15 ±25 ±50 ±5 ±10 ±15 ±25 ±50 ±5 ±10 ±15 ±25 ±50
Resistance
Range
(Ω)
±0.01%
Tolerance
24.9Ω
to
49.9KΩ
24.9Ω to 499KΩ-
24.9Ω
to
100KΩ
24.9Ω to 499KΩ-
24.9Ω
to
100KΩ
24.9Ω to 499KΩ-
±0.05%
Tolerance
4.7Ω to 1MΩ
4.7Ω to 1MΩ
4.7Ω to 1MΩ
4.7Ω to
1MΩ
4.7Ω to 1MΩ
4.7Ω to
1MΩ
±0.1%
Tolerance 4.7Ω to 2.49MΩ4.7Ω to
3MΩ
4.7Ω to
3MΩ
±0.25%
Tolerance
1Ω to 2.49MΩ1Ω to
3MΩ1Ω to 3MΩ
±0.5%
Tolerance
±1%
Tolerance
1 Working Voltage = or MAX Listed, whichever is lower.
2 Overload Voltage = 2.5 * or MAX Listed, whichever is lower.
( P * R )
( P * R )
RESISTOR THIN FILM PRECISION
RNP SERIES
45
www.johansondielectrics.com
HIGH POWER RATINGS SPECIFICATIONS
High Power
Package Size
Size 0603
(RNP14H)
Size 0805
(RNP15H)
Size 1206
(RNP18H)
Max Working
Voltage (V) 175V 150V 200V
Max Overload
Voltage (V) 2150V 300V 400V
Power Rating (W)
at 70ºC 0.100 0.125 0.250
TCR PPM/°C ±5 ±10 ±15 ±25 ±50 ±5 ±10 ±15 ±25 ±50 ±5 ±10 ±15 ±25 ±50
Resistance
Range
(Ω)
±0.01%
Tolerance
24.9Ω
to
15KΩ
24.9Ω to 100KΩ
24.9Ω
to
30KΩ
24.9 to 200K
24.9Ω
to
49.9KΩ
24.9Ω to 499KΩ
±0.05%
Tolerance
4.7Ω to 332KΩ
4.7Ω to
332KΩ
4.7Ω
to
511KΩ
4.7Ω to 511KΩ
4.7Ω to 1MΩ
±0.1%
Tolerance
4.7Ω to 1MΩ
4.7Ω
to
1MΩ
4.7Ω to1 MΩ
±0.25%
Tolerance
1Ω to 1MΩ
±0.5%
Tolerance
±1%
Tolerance
High Power
Package Size
Size 2010
(RNP19H)
Size 2512
(RNP20H)
Max Working
Voltage (V) 1200V 200V
Max Overload
Voltage (V) 2400V 400V
Power Rating (W)
at 70ºC 0.333 0.750
TCR PPM/°C ±5 ±10 ±15 ±25 ±50 ±10 ±15 ±25 ±50
Resistance
Range
(Ω)
±0.01%
Tolerance
24.9Ω
to
49.9KΩ
24.9Ω to 499KΩ24.9Ω to 2KΩ
±0.05%
Tolerance
4.7Ω to 1MΩ
4.7Ω to 2KΩ
±0.1%
Tolerance
±0.25%
Tolerance
1Ω to 2KΩ
±0.5%
Tolerance
±1%
Tolerance
1 Working Voltage = or MAX Listed, whichever is lower.
2 Overload Voltage = 2.5 * or MAX Listed, whichever is lower.
( P * R )
( P * R )
RESISTOR THIN FILM PRECISION
RNP SERIES
46
www.johansondielectrics.com
MECHANICAL CHARACTERISTICS
Test
Requirement
Conditions
Tolerance
<0.05%
Tolerance
>0.05%
Bending Strength DR±0.05% DR±0.2% Bending amplitude 3mm for 10 seconds
Resistance to Soldering Heat DR±0.05% DR±0.2% 260±5°C for 10 seconds
Thermal Shock DR±0.05% DR±0.25% -55°C~150°C, 100 cycles
Insulation Resistance >1000 MΩ Apply 100VDC for 1 minute
TCR As Spec. +25/-55/+25/+125/+25°C
Solderability 95% min coverage 245±5°C for 3 seconds
Damp Heat With Load
DR±0.05% DR±0.3% 40±2°C, 90~95% R.H. Max. working voltage for
1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF”
DR±0.5%
(For High Power Rating)
Load Life
DR±0.05% DR±0.2%
70±2°C, Max. working voltage for
1000 hrs with 1.5 hrs“ON” and 0.5 hrs OFF”
>7kΩD R±0.5%
DR±0.5%
(For High Power Rating)
Low Temperature Operation
DR±0.05% DR±0.2%
1 hour, -65°C, followed by 45 minutes of RCWV
DR±0.5%
(For High Power Rating)
Short Time Overload
DR±0.05% DR±0.2% RCWV*2.5 or Max. overload voltage for 5 sec-
onds
DR±0.2%
(For High Power Rating)
ENVIRONMENTAL CHARACTERISTICS
Package Size
Dimensions
L (Length)
Inches [mm]
W (Width)
Inches [mm]
T (Thickness)
Inches [mm]
EB (End Band)
Inches [mm]
0402 0.04 [1.02] 0.02 [0.51] 0.012 [0.30] 0.007 [0.18]
0603 0.06 [1.52] 0.03 [0.76] 0.018 [0.46] 0.012 [0.30]
0805 0.08 [2.03] 0.05 [1.27] 0.022 [0.56] 0.012 [0.30]
1206 0.12 [3.05] 0.06 [1.52] 0.022 [0.56] 0.016 [0.41]
2010 0.19 [4.83] 0.09 [2.29] 0.022 [0.56] 0.023 [0.58]
2512 0.25 [6.35] 0.12 [3.05] 0.022 [0.56] 0.023 [0.58]
This datasheet is subject to change without notice.
Moisture Sensitivity Level: MSL-1
RESISTOR THIN FILM PRECISION
RNP SERIES
47
www.johansondielectrics.com
Example P/N: RNC20ENR00075FT is Resistor Metal Element Current Sense SMT, size 2512, 3.0W, ±100ppm/ºC, 0.00075Ω (0.75mΩ), ±1.0%, embossed tape & reel
Maximum Operating Voltage = 1 11, 12, 13, 14, 15 mΩ - coating is green
2 6.5, 7, 8, 9, 10 mΩ at 50ppm - coating is green
3 All values contain green coating
KEY FEATURES
• Resistances from 0.5 mOhms to 15 mOhms
• Resistance Tolerances to ± 1%
• Customized Resistance available
• Power Rating up to 3 Watts
• TCR’s to ± 50 ppm/ ºC
• Available in sizes 1206 / 2010 / 2512
APPLICATIONS
• Engine Sensors • Data Recorders
• Surge Protection • Temperature Sensors
PRODUCT SUMMARY
HOW TO ORDER
RNC 20 EN R00075 F E
Resistor Metal Element
Current Sense SMT
PACKAGE
CODE
POWER RATING,
WATTS
TEMPERATURE
COEFFICIENT OF
RESISTANCE (TCR)
RESISTANCE TOLERANCE PACKING
18 = 1206
19 = 2010
20 = 2512
A = 1.0W
B = 1.5W
C = 2.0W
D = 2.5W
E = 3.0W
Q = ± 50ppm/°C
P = ± 75ppm/°C
N = ± 100ppm/ºC
M = ±150ppm/ºC
L = ± 200ppm/ºC
R00075 = 0.00075Ω (0.75mΩ)
0R0005 = 0.0005Ω (0.5mΩ)
00R001 = 0.001Ω (1mΩ)
0R0015 = 0.0015Ω (1.5mΩ)
Letter denotes decimal place.
R = decimal., “K” 103, “M” 106
Remaining 5 digits are
significant or placeholders.
F = ± 1.0%
H = ± 3.0%
J = ± 5.0%
E = Embossed
Tape & Reel
PRODUCT
SERIES
(RNC)
PACKAGE
SIZE
POWER
RATING
(W) at 80ºC
RESISTANCES
(mΩ)
TCR
(ppm/ºC) TOLERANCES
TEMPERATURE
RANGE
RNC18A 1206 1 0.5 - 10 ± 50
± 200 (0.5 mΩ)
1%
3%
5%
-55ºC to +170ºC
RNC19B 2010 1.5 0.5 - 10 ± 50
± 100 (0.5 mΩ)
RNC20A 12512 1
0.5, 0.75, 1, 1.5, 2, 11, 12, 13,
14, 15 ± 50
6, 6.5, 7 ± 75
4, 5, 10 ± 100
2.5, 3 ± 150
RNC20C 22512 2
0.5, 0.75, 1, 1.5, 2, 6.5, 7, 8,
9, 10 ± 50
6, 6.5, 7 ± 75
4, 5, 10 ± 100
2.5, 3 ± 150
RNC20D 32512 2.5 4, 4.5, 5, 6 ± 50
RNC20E 32512 3
0.5, 0.75 ± 100
1, 1.5, 2, 2.5, 3, 3.5 ± 50
RESISTOR METAL ELEMENT CURRENT SENSE SMT
RNC SERIES
Standard Termination Finish: Nickel Tin Alloy
48
www.johansondielectrics.com
Package Code Power Rating
(W)
Resistance
Value (Ω)
L (Length)
[mm]
W (Width)
[mm]
T (Thickness)
[mm]
EB (End Band)
[mm]
RNC18
(Size1206) 1
0.5 3.20 ±0.25 1.60 ±0.10 0.60 ±0.20 1.35 ±0.25
0.75 3.20 ±0.25 1.60 ±0.10 0.60 ±0.20 1.23 ±0.25
1, 4, 5, 6 3.20 ±0.25 1.60 ±0.10 0.60 ±0.20 1.10 ±0.25
2, 3, 10 3.20 ±0.25 1.60 ±0.10 0.60 ±0.20 0.60 ±0.25
7, 8, 9 3.20 ±0.25 1.60 ±0.10 0.60 ±0.20 0.90 ±0.25
RNC19
(Size 2010) 1.5
0.5 5.08 ±0.25 2.54 ±0.15 0.60 ±0.20 2.17 ±0.25
0.75 5.08 ±0.25 2.54 ±0.15 0.60 ±0.20 2.04 ±0.25
1 5.08 ±0.25 2.54 ±0.15 0.60 ±0.20 1.84 ±0.25
2, 6, 7, 8 5.08 ±0.25 2.54 ±0.15 0.60 ±0.20 1.54 ±0.25
3 5.08 ±0.25 2.54 ±0.15 0.60 ±0.20 1.04 ±0.25
4, 5 5.08 ±0.25 2.54 ±0.15 0.60 ±0.20 1.84 ±0.25
9, 10 5.08 ±0.25 2.54 ±0.15 0.60 ±0.20 1.29 ±0.25
RNC20
(Size 2512) 1
0.5 6.35 ±0.254 3.18 ±0.254 1.25 ±0.20 1.30 ±0.38
0.75 6.35 ±0.254 3.18 ±0.254 0.75 ±0.20 1.30 ±0.38
1 6.35 ±0.254 3.18 ±0.254 0.65 ±0.20 1.30 ±0.38
1.5 6.35 ±0.254 3.18 ±0.254 0.45 ±0.20 1.30±0.38
2 6.35 ±0.254 3.18 ±0.254 0.35 ±0.20 1.30 ±0.38
2.5 6.35 ±0.254 3.18 ±0.254 0.65 ±0.20 1.30 ±0.38
3 6.35 ±0.254 3.18 ±0.254 0.55 ±0.20 1.30 ±0.38
4 6.35 ±0.254 3.18 ±0.254 0.45 ±0.20 1.30 ±0.38
5 6.35 ±0.254 3.18 ±0.254 0.35 ±0.20 1.30 ±0.38
6 6.35 ±0.254 3.18 ±0.254 0.32 ±0.20 1.30 ±0.38
6.5 6.35 ±0.254 3.18 ±0.254 0.30 ±0.20 1.30 ±0.38
7 6.35 ±0.254 3.18 ±0.254 0.27 ±0.20 1.30 ±0.38
10 6.35 ±0.254 3.18 ±0.254 0.25 ±0.20 1.30 ±0.38
RNC20
w/Green
Coating
(Size 2512)
1 to 3
0.5 6.35 ±0.25 3.00 ±0.20 0.60 ±0.20 2.68 ±0.25
0.75 6.35 ±0.25 3.00 ±0.20 0.60 ±0.20 2.48 ±0.25
1, 5, 6 6.35 ±0.25 3.00 ±0.20 0.60 ±0.20 1.93 ±0.25
1.5, 6.5, 7 6.35 ±0.25 3.00 ±0.20 0.60 ±0.20 1.43 ±0.25
2, 3 6.35 ±0.25 3.00 ±0.20 0.60 ±0.20 1.18 ±0.25
4, 4.5 6.35 ±0.25 3.00 ±0.20 0.60 ±0.20 2.18 ±0.25
8 to 15 6.35 ±0.25 3.00 ±0.20 0.60 ±0.20 1.18 ±0.25
ELECTRICAL & MECHANICAL CHARACTERISTICS
RESISTOR METAL ELEMENT CURRENT SENSE SMT
RNC SERIES
49
www.johansondielectrics.com
Power Derating Curve
Rated Power ( % )
Ambient Temperature (°C)
0 20 40 60 80 100 120
0
20
40
60
80
100
120
140 160 180
Test
Specification
Test Method Black Coating Green Coating
Solderability 95% min. coverage 245 ±5°C for 3 seconds
Temperature Coefficient
of Resistance As Spec. +25/-55/+25/+125/+25°C
Dry Heat ± 1.0% ± 1.0% at +170°C for 1000 hrs
Load Life ± 1.0% ± 1.0% 70 ±2°C, Max. working voltage for 1000 hrs with
1.5 hrs “ON”and 0.5 hrs “OFF”
Short Time Overload ± 0.5% ± 1.0% 5x rated power for 5 seconds
Resistance to Soldering
Heat ± 0.5% ± 1.0% 260 ±5°C for 10 seconds
Thermal Shock ± 0.5% ± (0.5% +
0.05Ω) -55°C ~ 150°C, 100 cycles
Package Code RNC18
(Reel Size 1206)
RNC19
(Reel Size 2010)
RNC20
(Reel Size 2512)
Quantity 2000
Type Embossed Tape
This datasheet is subject to change without notice.
Note: Green coating cannot be used in solder bath
Moisture Sensitivity Level: MSL-1
SPECIFICATIONS
PACKAGING INFORMATION
AVAILABLE OPTIONS
(Consult Factory)
Special Testing Requirements
RESISTOR METAL ELEMENT CURRENT SENSE SMT
RNC SERIES
50
www.johansondielectrics.com
PRODUCT SERIES
(RHX)
RESISTANCE RANGE (Ω) 3POWER RATING (W) THERMAL
RESISTANCE TOLERANCESMIN MAX HEATSINK 1FREE AIR 2
RHXH1 0.02 51K 35 1 3.3ºC/W ± 1% ( R≥0.1Ω )
± 5%
RHXH2 0.02 51K 50 1 2.3°C/W ± 1% ( R≥0.1Ω )
± 5%
RHXH3 0.02 51K 100 3 1.3°C/W ± 1% ( R≥0.10Ω )
± 5%
Example P/N: RHXH2Q038K0F4 is Resistor High Power Low Inductance, 50W TO-220, ±50ppm/ºC, 38.0KΩ, ±1.0%, tube
1 Power Rating based on 25ºC Flange Temperature
2 Power Rating based on 25ºC Ambient Temperature
3 Contact Factory for Higher or Lower Values
TEMPERATURE COEFFICIENTS:
± 50ppm/°C ( R≥10Ω )
± 100ppm/°C ( 0.1Ω ≤ R < 10Ω )
± 250ppm/°C ( R < 0.1Ω )
Tin/Lead coated leads, add "- Pb" on part number.
KEY FEATURES
• Resistances from 51k Ohms
• High Stability Film Resistance Elements
• Rated Power of 35, 50 and 100 Watts
• TO-220 and TO-247 Housing
• Resistance tolerance of ± 0.1% or ± 1%
• Low Inductance of < 10nH for RHXH1 and RHXH2,
<50nH for RHXH3
APPLICATIONS
• Power Inverters • Engine Sensors
• Power Supplies • Temperature Sensors
PRODUCT SUMMARY
AVAILABLE OPTIONS
(Consult Factory)
HOW TO ORDER
RHX H2 Q 038K0 F 4
RESISTOR HIGH POWER
LOW INDUCTANCE
PACKAGE CODE TEMPERATURE COEFFICIENT
OF RESISTANCE (TCR)
RESISTANCE TOLERANCE PACKING
H1, 35W, TO-220
H2, 50W, TO-220
H3, 100W, TO-247
Q = ± 50ppm/°C
N = ± 100ppm/ºC
K = ±250ppm/ºC
0R038 = 0.038Ω
003K8 = 3.8KΩ
038K0 = 38.0KΩ
380K0 = 380.0KΩ
003M8 = 3.8MΩ
Letter denotes decimal place.
R = decimal., “K” 103, “M” 106
Remaining 4 digits are
significant or placeholders.
F = ± 1.0% (R ≥ 0.1Ω)
J = ± 5.0%
4 = Tube
Special Testing Requirements
RESISTOR HIGH POWER LOW INDUCTANCE
RHX SERIES
Standard Termination Finish: Matte Tin (Sn)
51
www.johansondielectrics.com
Power Derating Curve
Rated Power ( % )
Backplate Temperature (°C)
ENVIRONMENTAL CHARACTERISTICS
-25 0 25 50 75 100 125 150 175
0
20
40
60
80
100
120
Electrical Characteristics RHXH1 & RHXH2 Values RHXH3 Value
Maxiumum Current 25A -
Inductance <10nH ( At the Standoff ) -
Insulation Resistance >1000 Megohm >1000 Megohm
Dielectric Strength 2000 VAC 2500 VAC
Temperature Range -55°C to +155°C -55°C to +155°C
Maximum Working Volt-
age (500V MAX) 700 V or , whichever is
less
RHXH3 POWER RATING NOTES:
H3 High Power Low Inductance Resistors must be
attached to a suitable heatsink.
The maximum internal resistor temperature is 155°C.
Use the following formula to specify appropriate
heatsink:
RHXH1 & RHXH2 POWER RATING NOTES:
H1 and H2 High Power Low Inductance Resistors must
be attached to a suitable heatsink. Without a heatsink,
the maximum power rating is 1W.
The maximum internal resistor temperature is 155°C.
Use the following formula to specify an appropriate
heatsink:
RqH = Thermal Resistance of Heatsink ( °C/W )
RqR = Thermal Resistance of Resistor ( °C/W )
TMAX = Maximum Temperature of Resistor ( °C )
TA = Ambient Temperature of Heatsink ( °C )
P = Power Through Resistor ( W )
Where:
RESISTOR HIGH POWER LOW INDUCTANCE
RHX SERIES
52
www.johansondielectrics.com
Environmental Performance
DR
Test ConditionsRHXH1 RHXH2 RHXH3
Humidity Resistance ±1% + 0.05Ω 40°C, 90-95% RH, DC 0.1W, 1000 hr
Load Life ±1% + 0.05Ω 25°C, 90 min ON, 30 min OFF, 1000 hr
Temperature Cycle ±0.25% + 0.05Ω -55°C for 30 min, +155°C for 30 min, 1000
hr
Vibration ±0.25% + 0.05Ω IEC60068-2-6
Solder Heat ±0.1% + 0.05Ω +350°C, 3s
MOUNTING NOTES:
H1 and H2 High Power Low Inductance Resistors
must
be attached to a suitable heatsink.
Use thermal grease to mount resistor to a clean, flat
surface.
Use a compression washer to provide 150 to 300
pounds ( 665 to 1330N ) of mounting force.
Torque mounting screw to 8 in-lbs ( 0.9 N-m ).
Mounting tab is isolated from both pins.
MOUNTING NOTES:
H3 High Power Low Inductance Resistors must be
attached to a suitable heatsink.
Use thermal grease to mount resistor to a clean,
flat surface.
Use a compression washer to provide 150 to
300 pounds ( 665 to 1330N ) of mounting force.
Torque mounting screw to 8 in-lbs ( 0.9 N-m ).
Back plate is isolated from both pins.
RHXH3
RHXH1 & RHXH2
Moisture Sensitivity Level: MSL-1
MECHANICAL CHARACTERISTICS
ENVIRONMENTAL CHARACTERISTICS
RESISTOR HIGH POWER LOW INDUCTANCE
RHX SERIES
53
www.johansondielectrics.com
RESISTOR HIGH POWER LOW INDUCTANCE
RHX SERIES
This datasheet is subject to change without notice.
PULSE ENERGY CAPABILITY
54
www.johansondielectrics.com
PRODUCT SUMMARY
PRODUCT SERIES
(RKS) SIZE
POWER RATING
(W) 1
WORKING VOLTAGE (VAC) TEMPERATURE
RANGE 2
TRIMMED UNTRIMMED (> 5%)
RKS07 0402 0.050 30 60
- 55°C to + 155°C
(Standard Version)
- 55°C to + 300°C
(High Temperature Version
TCR valid + 25°C to + 125°C )
RKS14 0603 0.1 75 150
RKS15 0805 0.125 100 200
RKS18 1206 0.25 200 400
RKS41 1210 0.35 300 600
RKS20 2512 1.00 1500 2000
RKS21 4020 2.00 4000 6000
Example P/N: RKS21WN038M0KE is Resistor Thick Film, size 4020, -55ºC to + 300ºC, ±100ppm/ºC, 38.0MΩ, ±10.0%, embossed tape &
reel
Power Derating Curve
Rated Power ( % )
Ambient Temperature (°C)
1 Solder Pads must have sufficient heat conduction
2 See Power Derating Curve
0 50 100 150 200 250 300 350
0
20
40
60
80
100
120
High Temp
Standard
TEMPERATURE COEFFICIENT: ± 25ppm/ºC to ± 3000ppm/ºC
TOLERANCE RANGE: ± 0.25% to ± 30%
KEY FEATURES
• Resistances from 10M to 1TOhms
• Resistance Tolerances to ± 0.25%
• Power Rating 0.05 to 2 Watts
• Non-Magnetic
• TCR’s to ± 25ppm/ºC
• Special High Temperature Version to 300ºC
High Value Thick Film Resistance Element
Available in sizes 0420, 0603, 0805, 1206, 1210, 2512, 4020
APPLICATIONS
• Engine Sensors • Data Recorders
• Surge Protection • Temperature Sensors
AVAILABLE OPTIONS
(Consult Factory)
HOW TO ORDER
RKS 21 WN 038M0 K E
RESISTOR
THICK FILM
PACKAGE
CODE
OPERATING
TEMPERATURE
TEMPERATURE
COEFFICIENT OF
RESISTANCE (TCR)
RESISTANCE TOLERANCE PACKING
07 = 0402
14 = 0603
15 = 0805
18 = 1206
41 = 1210
20 = 2512
21 = 4020
S = -55ºC to + 155ºC
W = -55ºC to + 300ºC
T = ± 25ppm/ºC
Q = ± 50ppm/°C
N = ± 100ppm/ºC
K = ± 250ppm/ºC
J = ± 500ppm/ºC
H = ± 1000ppm/ºC
G = ± 2000ppm/ºC
F = ± 3000ppm/ºC
038M0= 38.0MΩ
380M0 = 380MΩ
00368 = 3.86Ω
03860 = 386Ω
001T0 = 1.0TΩ
Letter denotes decimal place.
“M” 106, “G” 109, “T” 1012
Remaining 4 digits are significant or placeholders.
C = ± 0.25%
D = ± 0.50%
F = ± 1.0%
G = ± 2.0%
J = ± 5.0%
K = ± 10.0%
M = ± 20.0%
N = ± 30.0%
E = Embossed
Tape & Reel
Special Testing Requirements
RESISTOR THICK FILM, HIGH TEMPERATURE
RKS SERIES
Silver Termination Finish: Plat/Silver
55
www.johansondielectrics.com
Long Term Stability
Max DR
<1 G W1 G W - 10 G W>10 G W
Storage 125°C, 1000h <1% <2% <5%
Load Life 70°C, 1000h <0.5% <1% <2%
Maximum Voltage, 1000h <0.5% <1% <2%
Package
Size
Tolerances Available ( % )
Temperature Coefficients Available ( ± ppm/°C ) 2
Voltage Coefficients Available ( ppm / V ) 2
Resistance Ranges ( W )
10M - 100M >100M - 500M >500M - 1G >1G - 10G >10G - 100G >100G - 1T
0402
5 to 20%
50, 100
500ppm/V
5% to 20%
100, 250
1000ppm/V
5% to 20%
250, 500
1000ppm/V
10% to 30%
1000, 2000
2000ppm/V
10% to 30%
2000, 3000
5000ppm/V
Contact Factory
0603
1 to 20%
50, 100
500ppm/V
2% to 20%
100, 250
500ppm/V
5% to 20%
250, 500
1000ppm/V
5% to 30%
500, 1000
2000ppm/V
10% to 30%
2000, 3000
5000ppm/V
Contact Factory
0805
0.5 to 20%
50, 100
500ppm/V
2% to 20%
100, 250
500ppm/V
5% to 20%
250, 500
500ppm/V
5% to 20%
500, 1000
1000ppm/V
10% to 30%
1000, 2000
3000ppm/V
-
1206
0.5% to 20%
25, 50, 100
250ppm/V
2% to 20%
50, 100, 250
500ppm/V
5% to 20%
100, 250
500ppm/V
5% to 20%
500, 1000
500ppm/V
10% to 30%
1000, 2000
1000ppm/V
-
1210
0.5% to 20%
25, 50, 100
25ppm/V
2% to 20%
50, 100, 250
250ppm/V
5% to 20%
100, 250
250ppm/V
5% to 20%
250, 500
250ppm/V
5% to 20%
500, 1000
500ppm/V
10% to 30%
1000, 2000
2000ppm/V
2512 1
0.5% to 20%
25, 50, 100
25ppm/V
1% to 20%
25, 50, 100
50ppm/V
1% to 20%
100, 250
50ppm/V
2% to 20%
100, 250
100ppm/V
5% to 20%
250, 500
250ppm/V
10% to 30%
500, 1000
1000ppm/V
4020 1
0.25% to
10%
25, 50, 100
10ppm/V
0.5% to 20%
25, 50, 100
25ppm/V
1% to 20%
25, 50, 100
25ppm/V
2% to 20%
50, 100
50ppm/V
5% to 30%
100, 250
100ppm/V
10% to 30%
500, 1000
500ppm/V
Specification Value
Solderability 250°C, 3s
Max Soldering Temperature 260°C, 10s
Climatic Category 55 / 155 / 56
1 TCR in ppm/K; +25°C to +125°C; TCR below standard TCR (highest value) and values >100G; +25°C to +85°C
2 VCR: typical values, all negative, not for all TCR values available
ELECTRICAL CHARACTERISTICS
ENVIRONMENTAL CHARACTERISTICS
RESISTOR THICK FILM, HIGH TEMPERATURE
RKS SERIES
56
www.johansondielectrics.com
This datasheet is subject to change without notice.
Package Size
Dimensions
L (Length)
Inches [mm]
W (Width)
Inches [mm]
T (Thickness)
Inches [mm]
EB (End Band)
Inches [mm]
0402 0.037 ±0.002
[ 0.95 ±0.05 ]
0.018 ±0.002
[ 0.48 ±0.10 / -0.05 ]
0.012 ±0.002
[ 0.3 ±0.05 ]
0.004 +0.004 /
-0.002
[ 0.1 +0.10 / -0.05 ]
0603 0.060 +0.006 / -0.002
[ 1.5 +0.15 / -0.05 ]
0.030 +0.008 / -0.002
[ 0.8 +0.15 / -0.05 ]
0.016 +0.006 / -0.002
[ 0.4 +0.15 / -0.05 ]
0.008 +0.008 /
-0.004
[ 0.2 +0.2 / -0.1 ]
0805 0.080 +0.006 / -0.002
[ 2.0 +0.15 / -0.05 ]
0.050 +0.006 / -0.002
[ 1.25 +0.15 / -0.05 ]
0.016 +0.006 / -0.002
[ 0.4 +0.15 / -0.05 ]
0.012 +0.008 /
-0.004
[ 0.3 +0.2 / -0.1 ]
1206 0.126 +0.006 / -0.002
[ 3.2 +0.15 / -0.05 ]
0.060 +0.008 / -0.002
[ 1.5 +0.2 / -0.05 ]
0.016 +0.006 / -0.002
[ 0.4 +0.15 / -0.05 ]
0.012 +0.008 /
-0.004
[ 0.3 +0.2 / -0.1 ]
1210 0.126 +0.006 / -0.002
[ 3.2 +0.15 / -0.05 ]
0.098 +0.008 / -0.002
[ 2.5 +0.2 / -0.05 ]
0.020 +0.006 / -0.002
[ 0.5 +0.15 / -0.05 ]
0.032 ±0.008
[ 0.8 ±0.2 ]
2512 0.250 +0.006 / -0.002
[ 6.3 +0.15 / -0.05 ]
0.138 +0.008 / -0.002
[ 3.5 +0.2 / -0.05 ]
0.024 +0.006 / -0.002
[ 0.6 +0.15 / -0.05 ]
0.035 ±0.008
[ 0.9 ±0.2 ]
4020 0.400 +0.006 / -0.002
[ 10.2 +0.15 / -0.05 ]
0.200 +0.008 / -0.002
[ 5.1 +0.2 / -0.05 ]
0.024 +0.006 / -0.002
[ 0.6 +0.15 / -0.05 ]
0.035 ±0.008
[ 0.9 ±0.2 ]
Bulk or Blistertape to IEC 60286-3
Tape width 8mm / Reel Diameter 180 or 330mm
Minimum quantity Bulk / 100 pieces per value (30 pieces per value for sizes 4020 and 2512)
Minimum quantity Tape & Reel / 500 pieces per value
(Note: Except size 0402 / 1000 pieces per value)
Moisture Sensitivity Level: MSL-1
MECHANICAL CHARACTERISTICS
PACKAGING INFORMATION
RESISTOR THICK FILM, HIGH TEMPERATURE
RKS SERIES
57
www.johansondielectrics.com
PRODUCT SUMMARY
PRODUCT SERIES
(RMC)
POWER RATING @ 85ºC
(W) RESISTANCE (Ω) 1TOLERANCES
J1 1 0.005, 0.01, 0.02, 0.025, 0.03, 0.04, 0.05, 0.1 ± 1% / ± 5%
J2 3 0.005, 0.01, 0.015, 0.02, 0.025, 0.03, 0.04,
0.05, 0.1 ± 1% / ± 5%
J3 5 0.005, 0.01, 0.015, 0.02, 0.025, 0.03, 0.05, 0.1 ± 1% / ± 5%
Example P/N: RMCJ2U0R005FS is Resistor Metal Element Current Sense, 3.0W, ±20ppm/ºC, 0.005Ω, ±1.0%, bulk
HOW TO ORDER
Power Derating Curve
Rated Power ( % )
Ambient Temperature (°C)
0 50 100 150 200 250 300 350
0
20
40
60
80
100
120
1 Contact Factory for other resistances
For Tin/Lead coated leads, add "- Pb" to part number.
KEY FEATURES
• Resistances from 0.005 to 0.100 Ohms
• Low Inductance (<10nH)
• Tolerances to ± 1%
• Resistance Wire TCR: ± 20ppm/ºC
• For Current Sensing and Shunt Applications
• All Welded Construction
Economical Bare Metal Element
APPLICATIONS
• Base Station • Current Sensing
• Power Inverters • Lightning Pulse Survival
AVAILABLE OPTIONS
(Consult Factory)
RMC J2 U 0R005 F S
RESISTOR METAL
ELEMENT CURRENT
SENSE
PACKAGE
CODE, WATTS
TEMPERATURE COEFFICIENT
OF RESISTANCE (TCR)
RESISTANCE TOLERANCE PACKING
J1, 1.0W
J2, 3.0W
J3, 5.0W
U = ± 20ppm/ºC 0R005 = 0.005Ω (5mΩ)
0R025 = 0.025Ω (25mΩ)
00R05 = 0.05Ω (50mΩ)
000R1 = 0.1Ω (100mΩ)
Letter denotes decimal place.
R = decimal., “K” 103, “M” 106
Remaining 4 digits are significant or placeholders.
F = ± 1.0%
J = ± 5.0%
S = Bulk
Special Testing Requirements
RESISTOR METAL ELEMENT CURRENT SENSE
RMC SERIES
Standard Termination Finish: Matte Tin (Sn)
58
www.johansondielectrics.com
Package Code J1 J2 J3
Dimensions
Inches [mm]
H0.200 [5.08]
(Tolerances) ±0.100" [±2.54mm] 1.0 [25.40mm] Max 1.0 [25.40mm] Max
L (Tolerances)
+0.040 / -0.020” [+1.02 / 0.51mm] 0.450 [11.43mm] 0.600 [15.24mm] 0.800 [20.32mm]
D (Tolerances)
±0.002” [±0.05mm] 0.040 [1.02mm] 0.040 [1.02mm] 0.040 [1.02mm]
W (Tolerances)
+0.010 / -0.005 [+0.25 / -0.13mm] 0.065 [1.65mm] 0.065 [1.65mm] 0.065 [1.65mm]
A (Tolerances)
±0.030” [±0.8mm] 0.125 [3.18mm] 0.125 [3.18mm] 0.125 [3.18mm]
Package Code J1 J2 J3
Standard Package Quantities 250 (Bulk Only)
This datasheet is subject to change without notice.
Moisture Sensitivity Level: MSL-1
MECHANICAL CHARACTERISTICS
PACKAGING INFORMATION
RESISTOR METAL ELEMENT CURRENT SENSE
RMC SERIES
59
www.johansondielectrics.com
PRODUCT RANGE SUMMARY
HOW TO ORDER
RHF H4 038K0
RESISTOR
POWER THIN FILM
PACKAGE CODE
WATTS
TEMPERATURE
COEFFICIENT OF
RESISTANCE (TCR)
RESISTANCE TOLERANCE PACKING
RHF H4, 35W, TO-263 Q = ± 50 ppm/ºC
N = ± 100 ppm/ºC
K = ±250 ppm/ºC
0R038 = 0.038
Ω
003K8 = 3.8KΩ
038K0 = 38.0KΩ
F = ± 1.0%
J = ± 5.0%
E = Embossed Tape & Reel
RESISTOR POWER THIN FILM
RHF SERIES
1
2W on simple solder pad
2
Consult factory for other tolerances not listed
For Tin/Lead coated leads, add “-Pb” to part numbers.
QEF
KEY FEATURES
• Resistances from 0.01 Ohm to 51K Ohms
• Low Stability to 1%
• Resistance Tolerances to ± 1%
• TCR to ± 50ppm/ºC
• Power Rating to 35 Watt
• Solder Reflow Secure at 260ºC / 20s
• TO-263 Housing (D-Pak)
• Isolated Back Plate
APPLICATIONS
• Power Inverters • Lighting (LED)
• Braking Systems • Power Supplies
POWER RATING 1
(with heatsink)
RESISTANCE
RANGE (Ω)
TEMPERATURE
COEFFICIENT
TOLERANCE
RANGE 2
OPERTING
TEMPERATURE
RANGE
35 W
0.01 to 0.099 Ω± 250 ppm/ºC ± 5%
-55ºC to+155ºC
0.1 to 9.9 Ω± 100 ppm/ºC ± 1% / ± 5%
10 to 51K Ω± 50 ppm/ºC ± 1%
Standard Termination Finish: Matte Tin (Sn)
Example P/N: RHFH4Q038K0FE is Resistor Power Thin, 35W, ±50ppm/ºC, 38.0K
Ω, ±1.0%, embossed tape & reel
60
www.johansondielectrics.com
MECHANICAL CHARACTERISTICS
RESISTOR POWER THIN FILM
RHF SERIES
Units
Dimensions
A B C D E F G H J K L
mm 10.3 10.1 15.3 5.08 1.5 0.75 2.2 4.5 0.5 2.5 5.0
tol. (± mm) 0.2 0.2 1.0 0.1 0.05 0.05 0.2 0.2 0.05 0.5 1.0
inches 0.405 0.400 4.54 0.200 0.060 0.030 0.087 0.177 0.020 0.10 0.20
tol. (± inches) 0.008 0.008 0.04 0.004 0.002 0.002 0.008 0.008 0.002 0.02 0.04
Moisture Sensitivity Level: MSL-1
SPECIFICATIONS
Specifications
Values
Resistor Material Thin Film
Terminals 2
Power Rating (with heatsink) 35 W ( 2W on Simple Solder Pad )
Inductance 8.4 nH
Resistance Range 0.01 to 0.099Ω0.1 to 9.9Ω10 to 51KΩ
Temperature Coefficient ±250 ppm/°C ±100 ppm/°C ±50 ppm/°C
Tolerances (contact factory for other values) ± 5% ±1% / ±5% ±1%
Operating Temperature -55°C to 155°C
Thermal Resistance Rthj-c 3.3 K/W
Max Operating Voltage 500V
Voltage Proof 2.0kV DC
Insulation Resistance Over 1,000 MΩ
Load Life ±1% 90 min ON, 30 min OFF, 1000 hrs @ 25ºC
Humidity ±1% 90-95% RH, 0.1W, 1000 hrs @ 40ºC
Temperature Cycle ±0.25% -55ºC for 30 min, +155ºC for 30 min, 5 cycles
Solder Heat ±0.1% 350ºC ±5C for 3 seconds
Vibration ±0.25% IEC60068-2-6
Reflow soldering Lead-free soldering 260°C / 20s
61
www.johansondielectrics.com
RESISTOR POWER THIN FILM
RHF SERIES
RqH = Thermal Resistance of Heatsink ( K/W )
RqR = Thermal Resistance of Resistor ( K/W )
TMAX = Maximum Temperature of Resistor ( °C )
TA = Ambient Temperature of Heatsink ( °C )
P = Power Through Resistor ( W )
Where:
POWER RATING NOTES:
RHF Resistors must be attached to a suitable heatsink.
The maximum internal resistor temperature is 175°C.
Use the following formula to specify appropriate heatsink:
0
20
40
60
80
100
120
25 50 85 100 115 130 145 155
Power Derating Curve
Temperature of the Backplate (°C)
Power (% Nominal)
This datasheet is subject to change without notice.
Load life test will be necessary in actual equipment
62
www.johansondielectrics.com
SIZE
CODES
RATED
CURRENT (A)
OPERATING
CURRENT (A)
POWER
RATING (W)
RESISTANCE (mΩ)
50mV Output
RESISTANCE (mΩ)
100mV Output
VOLTAGE
TOLERANCE
OPERATING
TEMPERA-
TURE
21 5 - 150 3.33 - 100 0.25 - 10 0.3333 - 10.00 0.6667 - 20.00 ± 0.25%
Standard
±0.1%
Available
-40 °C to +
60°C
32 170 - 600 113 - 400 10 - 50 .0833 - .2941 0.1667 - 0.5882
61 1 - 500 0.667 - 333.33 .25 - 40 0.10 - 50 0.20 - 100 ±0.1%
Standard 30°C + 70°C
Example P/N: RCS21B005C050Z is Resistor Metal Element Shunts, size 2013, with base, 5 Amps, ±0.25% tolerance, 50mV, special packaging
KEY FEATURES
• Base Mounted Shunts. ( Non-Base Mounted Available)
• Manganin Resistive Element
• Current Rating 5 to 1200 Amps
• Rated Output 500mV, 100mV, or Custom
• DC Current Shunts - Sizes 2013, 3318
• DC Ammeter Shunts - Size 6013
PRODUCT SUMMARY
HOW TO ORDER
RCS 21 B 005 C
SERIES SIZE CODE BASE OR NO BASE CURRENT RATING
(AMP)
TOLERANCE VOLTAGE OUTPUT PACKAGING
RCS = Resistor
Metal Element
Shunts
21 = 2013
32 = 3318
61 = 6013
B = Base
N = No Base (not
available on size code 61)
005 = 5 amps
010 = 10 amps
015 = 15 amps
100 = 100 amps
See Table.
B = ±0.1%
C = ±0.25%
050 = 50mV
100 = 100mV
Z = Special
RESISTOR METAL ELEMENT SHUNTS
RCS SERIES
050 Z
APPLICATIONS
• Electroplating • Solar Generators
• Heavy Industry • Wind Power
• Battery Chargers • Mining
• Power Converters • Current Measurements
63
www.johansondielectrics.com
RESISTOR METAL ELEMENT SHUNTS
RCS SERIES
Rated Current
(A)
Resistance (mΩ)
Opertating Current
(A)
Power(W)
At 50mV Output At 100mV Output At 50mV Output
At 100mV
Output
RCS21 at 5 Amps 5
10.00
20.00
3.33 0.25 0.5
RCS21 at 10 Amps 10
5.00
10.00
6.67 0.5 1
RCS21 at 15 Amps 15
3.333
6.667
10 0.75 1.5
RCS21at 20 Amps 20
2.500
5.000
13.3 1 2
RCS21 at 30 Amps 30
1.667
3.333
20 1.5 3
RCS21 at 50 Amps 50
1.000
2.000
33.3 2.5 5
RCS21 at 75 Amps 75
0.667
1.333 50
3.75 7.5
RCS21 at 80 Amps 80 0.625 1.250 53.3
4 8
RCS21 at 85 Amps 85 0.588 1.176 56.7
4.25 8.5
RCS21 at 100 Amps 100 0.500 1.000 66.7
5 10
RCS21 at 150 Amps 150 0.333 0.6667 100
7.5 15
Fastener Torque =
3-3 33 ft-Ibs
(4.1-4.5 Nm)
Weight = 0.1 Kg
SIZE 2013 - DC CURRENT SHUNTS
SIZE 3318 - DC CURRENT SHUNTS
Fastener Torque =
3-3 33 ft-Ibs
(4.1-4.5 Nm)
Weight = 0.1 Kg
Part
Number
Rated Current
(A)
Opertating Current
(A)
Resistance (mΩ) Power (W)
At 50mV Output At 100mV Output At 50mV Output
At 100mV
Output
RCS32 at 170 Amps 170
113 0.2941
0.5882
8.5 17
RCS32 at 200 Amps 200
133 0.2500
0.5000
10 20
RCS32 at 250 Amps 250
166 0.2000
0.4000
12.5 25
RCS32 at 300 Amps
300 200 0.1667
0.3333
15 30
RCS32 at 400 Amps
400 267 0.1250
0.2500
20 40
RCS32 at 450 Amps
450 300 0.1111
.2222
22.5 45
RCS32 at 500 Amps
500
333
0.1000
0.2000
25 50
RCS32 at 600 Amps
600
400 0.0833 0.1667
30 60
Top View Side View
Top View Side View
64
www.johansondielectrics.com
RESISTOR METAL ELEMENT SHUNTS
RCS SERIES
Part
Number
Rated Current
(A)
Opertating Current
(A)
Resistance (mΩ) Power (W)
At 50mV Output At 100mV Ouput At 50mV Output
At 100mV
Output
RCS61B001B 1
.667 50
100
.05 0.1
RCS61B002B 2
1.33 25
50
.2 .4
RCS61B005B 5
3.33 10
20
.25 .5
RCS61B010B
10 6.67 5.0
10
.5 1
RCS61B020B
20 13.33 2.5
5.0
1 2
RCS61B050B
50 33.33 1.0
2.0
2.5 5
RCS61B100B
100
66.67
0.5
1.0
5 10
RCS61B150B
150
100 0.333 0.667
7.5 15
RCS61B200B
200
133.33 0.25 0.50
10 20
RCS61B250B
250
166.67 0.20 0.40
12.5 25
RCS61B300B
300
200 0.167 0.333
15 30
RCS61B400B
400
266.67 0.125 0.25
20 40
RCS61B500B
500
333.33 0.10 0.20
25 50
Top View
Side View
Note: No base not available on Size 6013
SIZE 6013 - DC AMMETER SHUNTS
65
www.johansondielectrics.com
RESISTOR METAL ELEMENT SHUNTS
RCS SERIES
This datasheet is subject to change without notice.
TECHNICAL NOTES
Mounting:
Shunts should be mounted with manganin resistive blades in a vertical position in order to promote the free convec-
tional fl ow of air. If vertical mounting is not practical, forced air cooling or adding heat sinks to the blocks can reduce the
operating temperature. The manganin blades must never exceed +145°C, otherwise permanent resistance change may
occur.
When current of 100A or greater is passing through the shunt, the major portion of heat generated is dissipated by
conduction through the shunt terminal blocks into the connecting buss bar or cable. Therefore, it is necessary to insure
that good contact is made between the shunt terminal blocks and the conductor terminals and that the conductors have
adequate cross section to keep the temperature of the shunt from exceeding 145°C ( 125°C recommended ).
If the shunt is mounted in an enclosure, care must be taken to ensure adequate cooling. If the power density is greater
than 1/4 watt per square inch of the enclosure surface for all enclosed devices, additional cooling must be supplied in
the form of air vents or fans.
Shunts also must be installed in a way that protects them from thermal expansion forces produced from buss bar or
short-circuit forces. Flexible wiring may be required in high pulse current, high vibration, or high temperature applications.
Where possible, all shunts should be mounted on the ground side of the circuit. For circuits above 750VDC,
RS shunts must be mounted on the ground side due to the dielectric strength of the shunt base.
Operating Current Derating:
For continuous operation, it is recommended that shunts are not run at more than two thirds (2/3) the rated current un-
der normal conditions per IEEE standards for DC instrument shunts. At ambient temperatures above 40°C, the current
must be further derated to prevent damage.
Pulse Operation:
Shunts that do not need continuous operation and are only exposed to intermittent pulses can be operated at levels
above their rated current for short periods of times. Pulses are limited to the maximum temperature of the blades not
exceeding 145°C ( 125°C recommended ). Many variables such as ambient temperature, cross section of the current
carrying
conductors, and pulse duration make calculating exact values diffi cult. Shunt size will need to be validated by customer
for pulse current and duty cycle on a case by case basis.
66
www.johansondielectrics.com
The Semi-shielded Power Inductor LPC Series are low profile
and high current power inductors. Several dimensions are
offered.
PRODUCT RANGE SUMMARY
HOW TO ORDER
SIZE
CODE
INDUCTANCE
RANGE
RATED CURRENT
RANGE
BASED ON
INDUCTANCE CHANGE
RATED CURRENT
RANGE
BASED ON
TEMPERATURE RISE
DC
RESISTANCE
RANGE
OPERTING
TEMPERTURE
RANGE
2410
0.68 - 22.0
μH
0.40 - 2.60 A 0.40 - 2.50 A 60 mΩ - 1470 mΩ -25ºC to +120ºC
3010
1.00 - 100.0
μH
0.15 - 2.30 A 0.18 - 2.30 A 50 mΩ - 5.00 Ω
-40ºC to +125ºC
3012
1.00 - 47.0
μH
0.23 - 1.90 A 0.35 - 1.71 A 45 mΩ - 1250 mΩ
3015
1.00 - 100.0
μH
0.25 - 2.30 A 0.30 - 2.30 A 28 mΩ - 2100 mΩ
4018
0.82 - 220.0
μH
0.30 - 4.70 A 0.28 - 4.00 A 16 mΩ - 2960 mΩ
4025
1.00 - 220.0
μH
0.20 - 3.00 A 0.20 - 3.00 A 12 mΩ - 2300 mΩ
5040
1.50 - 47.0
μH
1.10 - 6.00 A 0.90 - 3.60 A 15 mΩ - 270 mΩ
6045
1.00 - 220.0
μH
0.55 - 8.60 A 0.50 - 6.50 A 10 mΩ - 920 mΩ
1
Including self-generated heat
TEST FREQUENCY: 100KHz, 1V
STORAGE TEMPERATURE: -10ºC to +40ºC, humidity 30 to 70% R.H.
MOISTURE SENSITIVITY LEVEL: MSL - 1
1
Electrical Schematic: No Polarity
LPC 3015 2R2 M E
INDUCTOR
POWER SEMI-SHIELDED
SIZE CODE INDUCTANCE TOLERANCE PACKING
LPC
(Coated)
2410
3010
3012
3015
4018
4025
5040
6045
R68 = 0.68
μH
2R2 = 2.2
μH
220 = 22 μH
221 = 220 μH
See chart
M = ± 20%
N = ± 30%
E = Embossed Tape & Reel
Consult Factory for values not listed in the product range
Example P/N: LPC30152R2ME is semi-shielded power inductor 2.2 μH, 3015 size, ±20%, embossed tape & reel
KEY FEATURES
• High Current Performance
• Small and Low Profile Inductors
• Magnetic shielding
• Available for automatic mounting in tape and reel package
APPLICATIONS
• DC/DC Converter • Data Storage Devices
• Power Supplies • Consumer Electronics
• Industrial
POWER INDUCTORS, SEMI-SHIELDED (COATED)
LPC SERIES
Standard Termination Finish: Matte Tin(Sn)
67
www.johansondielectrics.comwww.johansondielectrics.com
Part
Number
Inductance
@ 100KHz, 1V
Rated Current Based
on Inductance Change
Rated Current Based
on Temperature Rise
DC
Resistance
DC Resistance
Tolerance
LPC2410R68NE 0.68 μH,
±30% 2.60 A 2.50 A
60 mΩ
±30%
LPC24101R0NE 1.0 μH,
±30% 2.00 A 1.90 A
70 mΩ
±30%
LPC24101R5ME 1.5 μH,
±20% 1.50 A 1.50 A
110 mΩ
±20%
LPC24102R2ME
2.2
μH,
±20% 1.30 A 1.20 A
140 mΩ
±20%
LPC24103R3ME
3.3
μH,
±20% 1.05 A 1.00 A
220 mΩ
±20%
LPC24104R7ME
4.7
μH, ±20%
0.92 A 0.90 A
290 mΩ
±20%
LPC24106R8ME
6.8
μH, ±20% 0.75
A0.65 A
410 mΩ
±20%
LPC2410100ME
10.0
μH, ±20% 0.60
A
0.55
A
690 mΩ
±20%
LPC2410150ME
15.0
μH, ±20% 0.50
A
0.45
A
1020 mΩ
±20%
LPC2410220ME
22.0
μH, ±20% 0.40
A
0.40
A
1470 mΩ
±20%
3010 SIZE
Part
Number
Inductance
@ 100KHz, 1V
Rated Current Based
on Inductance Change
Rated Current Based
on Temperature Rise
DC
Resistance
DC Resistance
Tolerance
LPC30101R0NE 1.0 μH,
±30% 2.30 A 2.30 A
50 mΩ
±
25%
LPC30101R2NE 1.2 μH,
±30% 1.90 A 2.10 A
62 mΩ
±
30%
LPC30101R5NE 1.5 μH,
±30% 1.65 A 2.00 A
70 mΩ
±
30%
LPC30102R2ME 2.2 μH,
±20% 1.30 A 1.90 A
80 mΩ
±
20%
LPC30103R3ME 3.3 μH,
±20% 1.05 A 1.80 A
130 mΩ
±
20%
LPC30104R7ME 4.7 μH, ±20%
0.85 A 1.70 A
175 mΩ
±
20%
LPC30106R8ME 6.8 μH, ±20% 0.70
A1.30 A
260 mΩ
±
20%
LPC3010100ME 10.0 μH, ±20% 0.60
A
0.90
A
350 mΩ
±
20%
LPC3010150ME 15.0 μH, ±20% 0.50
A
0.80
A
510 mΩ
±
20%
LPC3010220ME 22.0 μH, ±20% 0.40
A
0.70
A
780 mΩ
±
20%
LPC3010330ME 33.0 μH, ±20% 0.32
A
0.50
A
1.10 Ω
±
20%
LPC3010470ME 47.0 μH, ±20% 0.28
A
0.35
A
1.60 Ω
±
20%
LPC3010101ME 100.0 μH, ±20% 0.15
A
0.18
A
5.00 Ω
±
20%
Units Inches mm
L 0.094
±0.004
2.40
±0.10
W 0.094
±0.004
2.40
±0.10
T
max 0.039 1.00
*1
*1 *2
Part Material
1Ferrite Core Ni-Zn Ferrite
2Copper Wire Cu / P180 Grd 1
3Termination Ag / Ni / Sn
4
Adhesive Silicon Base Resin
Magnetic Powder Ni-Zn Ferrite
Part Material
1Ferrite Core Ni-Zn Ferrite
2Copper Wire Cu / P180 Grd 1
3Termination Ag / Ni / Sn
4
Adhesive Silicon Base Resin
Magnetic Powder Ni-Zn Ferrite
Units Inches mm
L 0.118
±0.004
3.00
±0.10
W 0.118
±0.004
3.00
±0.10
T
max 0.039 1.00
*1. Idc1: Based on inductance change (ΔL/Lo: ≤ -30%)
*2. Idc2: Based on temperature rise (ΔT: 40ºC TYP.)
*2
Notes: Inductance is measured in HP-4285A Precision LCR Meter.
RDC measured in DU-5011 milli ohm meter (or equivalent).
Not marked
2410 SIZE
Not marked
POWER INDUCTORS, SEMI-SHIELDED (COATED)
LPC SERIES
See page 69 for footprint
See page 69 for footprint
68
www.johansondielectrics.com
3012 SIZE
3015 SIZE
Part Number
Inductance
@ 100KHz, 1V
Rated Current Based
on Inductance Change
Rated Current Based
on Temperature Rise
DC
Resistance
DC Resistance
Tolerance
LPC30121R0NE 1.0 μH,
±30% 1.90 A 1.71 A
45 mΩ
±20%
LPC30121R5NE 1.5 μH,
±30% 1.50 A 1.60 A
55 mΩ
±20%
LPC30122R2ME 2.2 μH,
±20% 1.25 A 1.37 A
60 mΩ
±20%
LPC30122R7ME 2.7 μH,
±20% 1.20 A 1.30 A
90 mΩ
±20%
LPC30123R3ME 3.3 μH,
±20% 1.05 A 1.21 A
90 mΩ
±20%
LPC30124R7ME 4.7 μH,
±20% 0.90 A 1.06 A
150 mΩ
±20%
LPC30126R8ME 6.8 μH,
±20% 0.70 A 0.89 A
190 mΩ
±20%
LPC3012100ME 10.0 μH,
±20% 0.60 A 0.72 A
270 mΩ
±20%
LPC3012150ME 15.0 μH,
±20% 0.50 A 0.57 A
450 mΩ
±20%
LPC3012220ME 22.0 μH,
±20% 0.40 A 0.50 A
550 mΩ
±20%
LPC3012330ME 33.0 μH,
±20%
0.30
A
0.41
A
900 mΩ
±20%
LPC3012470ME 47.0 μH,
±20%
0.23
A
0.35
A
1250 mΩ
±20%
Part Number
Inductance
@ 100KHz, 1V
Rated Current Based
on Inductance Change
Rated Current Based
on Temperature Rise
DC
Resistance
DC Resistance
Tolerance
LPC30151R0NE 1.0 μH,
±30% 2.30 A 2.30 A
28 mΩ
±30%
LPC30151R5NE 1.5 μH,
±30% 2.10 A 2.10 A
37 mΩ
±30%
LPC30152R2ME 2.2 μH,
±20% 1.62 A 2.00 A
58 mΩ
±20%
LPC30152R7ME 2.7 μH,
±20% 1.50 A 1.95 A
60 mΩ
±20%
LPC30153R3ME 3.3 μH,
±20% 1.35 A 1.80 A
75 mΩ
±20%
LPC30154R7ME 4.7 μH,
±20% 1.20 A 1.60 A
100 mΩ
±20%
LPC30155R6ME 5.6 μH,
±20% 1.00 A 1.40 A
120 mΩ
±20%
LPC30156R8ME 6.8 μH,
±20% 0.97 A 1.30 A
150 mΩ
±20%
LPC3015100ME 10.0 μH,
±20% 0.80 A 1.10 A
220 mΩ
±20%
LPC3015150ME 15.0 μH,
±20% 0.65 A 1.00 A
300 mΩ
±20%
*1 *2
*1 *2
Units Inches mm
L 0.118
±0.004
3.00
±0.10
W 0.118
±0.004
3.00
±0.10
T
max 0.047 1.20
Part Material
1Ferrite Core Ni-Zn Ferrite
2Copper Wire Cu / P180 Grd 1
3Terminals Ag / Ni / Sn
4
Adhesive Silicon Base Resin
Magnetic Powder Ni-Zn Ferrite
Units Inches mm
L 0.118
±0.004
3.00
±0.10
W 0.118
±0.004
3.00
±0.10
T
max 0.059 1.50
Part Material
1Ferrite Core Ni-Zn Ferrite
2Copper Wire Cu / P180 Grd 1
3Termination Ag / Ni / Sn
4
Adhesive Silicon Base Resin
Magnetic Powder Ni-Zn Ferrite
Not marked
Notes: Inductance is measured in HP-4285A Precision LCR Meter.
RDC measured in DU-5011 milli ohm meter (or equivalent).
*1. Idc1: Based on inductance change (ΔL/Lo: ≤ -30%)
*2. Idc2: Based on temperature rise (ΔT: 40ºC TYP.)
Not marked
POWER INDUCTORS, SEMI-SHIELDED (COATED)
LPC SERIES
See page 69 for footprint
See page 69 for footprint
69
www.johansondielectrics.com
4018 SIZE
Part Number
Inductance
@ 100KHz, 1V
Rated Current Based
on Inductance Change
Rated Current Based
on Temperature Rise
DC
Resistance
DC Resistance
Tolerance Marking
LPC4018R82NE 0.82 μH,
±30% 4.20 A 4.00 A
16 mΩ
±30% R82
LPC40181R0NE 1.0 μH,
±30% 4.70 A 3.70 A
19 mΩ
±30% 1R0
LPC40181R2NE 1.2 μH,
±30% 4.00 A 3.50 A
21 mΩ
±30% 1R2
LPC40181R5NE 1.5 μH,
±30% 3.50 A 3.10 A
27 mΩ
±30% 1R5
LPC40182R2ME 2.2 μH,
±20% 3.00 A 2.90 A
37 mΩ
±20% 2R2
LPC40182R7ME 2.7 μH,
±20% 2.40 A 2.30 A
43 mΩ
±20% 2R7
LPC40183R3ME 3.3 μH,
±20% 2.30 A 2.20 A
55 mΩ
±20% 3R3
LPC40184R7ME 4.7 μH,
±20% 2.00 A 1.90 A
70 mΩ
±20% 4R7
LPC40186R8ME 6.8 μH,
±20% 1.60 A 1.50 A
98 mΩ
±20% 6R8
LPC4018100ME 10.0 μH,
±20%
1.40
A
1.30
A
150 mΩ
±20%
100
LPC4018150ME 15.0 μH,
±20%
1.10
A
1.00
A
220 mΩ
±20%
150
LPC4018220ME 22.0 μH,
±20%
0.95
A
0.90
A
290 mΩ
±20%
220
LPC4018330ME 33.0 μH,
±20%
0.75
A
0.70
A
460 mΩ
±20%
330
LPC4018470ME 47.0 μH,
±20%
0.62
A
0.60
A
650 mΩ
±20%
470
LPC4018680ME 68.0 μH,
±20%
0.50
A
0.50
A
940 mΩ
±20%
680
LPC4018101ME 100.0 μH,
±20%
0.45
A
0.42
A
1330 mΩ
±20%
101
LPC4018151ME 150.0 μH,
±20%
0.35
A
0.32
A
2000 mΩ
±20%
151
LPC4018221ME 220.0 μH,
±20%
0.30
A
0.28
A
2960 mΩ
±20%
221
3015 SIZE (CONTINUED)
Part Number
Inductance
@ 100KHz, 1V
Rated Current Based
on Inductance Change
Rated Current Based
on Temperature Rise
DC
Resistance
DC Resistance
Tolerance
LPC3015180ME 18.0 μH,
±20% 0.57 A 0.90 A
410 mΩ
±20%
LPC3015220ME 22.0 μH,
±20% 0.55 A 0.80 A
475 mΩ
±20%
LPC3015330ME 33.0 μH,
±20% 0.45 A 0.70 A
650 mΩ
±20%
LPC3015390ME 39.0 μH,
±20% 0.40 A 0.50 A
850 mΩ
±20%
LPC3015470ME 47.0 μH,
±20% 0.35 A 0.45 A
1100 mΩ
±20%
LPC3015680ME 68.0 μH,
±20% 0.30 A 0.35 A
1700 mΩ
±20%
LPC3015820ME 82.0 μH,
±20% 0.27 A 0.32 A
1900 mΩ
±20%
LPC3015101ME 100.0 μH,
±20% 0.25 A 0.30 A
2100 mΩ
±20%
*1 *2
*1 *2
Units Inches mm
L 0.157
±0.008
4.00
±0.20
W 0.157
±0.008
4.00
±0.20
T
max
(R82-2R7) 0.074 1.88
(3R3-221) 0.071 1.80
Part Material
1Ferrite Core Ni-Zn Ferrite
2Copper
Wire Cu / P180 Grd 1
3Termination Ag / Ni / Sn<