Voltage Regulators - Linear

Results: 2

Filters

Stacked

Scrolling

Manufacturer

Analog Devices Inc./Maxim IntegratedTexas Instruments

Packaging

Cut Tape (CT)Digi-Reel®Tape & Reel (TR)

Voltage - Output (Min/Fixed)

1.8V3.3V

Voltage Dropout (Max)

0.15V @ 300mA (Typ)0.35V @ 150mA

Current - Output

150mA300mA

Current - Quiescent (Iq)

55 µA100 µA

Current - Supply (Max)

65 µA70 µA

PSRR

40dB (1kHz)60dB ~ 50dB (100Hz ~ 10kHz)

Control Features

EnableEnable, Power Good

Operating Temperature

-40°C ~ 125°C-40°C ~ 85°C (TA)

Package / Case

5-TSSOP, SC-70-5, SOT-353SOT-23-5 Thin, TSOT-23-5

Supplier Device Package

SC-70-5TSOT-23-5

Showing

of 2

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LP5951MG-1.8/NOPB IC REG LINEAR 1.8V 150MA SC70-5 Texas Instruments	4,064 In Stock 10,000 Factory	1 : $1.01000 Cut Tape (CT) 1,000 : $0.46110 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	1.8V	-	0.35V @ 150mA	150mA	55 µA	70 µA	60dB ~ 50dB (100Hz ~ 10kHz)	Enable	Over Current, Over Temperature, Short Circuit	-40°C ~ 125°C	Surface Mount	5-TSSOP, SC-70-5, SOT-353	SC-70-5
MAX8888EZK33+T IC REG LIN 3.3V 300MA TSOT23-5 Analog Devices Inc./Maxim Integrated	1,464 In Stock 15,000 Factory	1 : $2.80000 Cut Tape (CT) 2,500 : $1.33500 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	0.15V @ 300mA (Typ)	300mA	100 µA	65 µA	40dB (1kHz)	Enable, Power Good	Over Current, Over Temperature, Short Circuit	-40°C ~ 85°C (TA)	Surface Mount	SOT-23-5 Thin, TSOT-23-5	TSOT-23-5

Showing

of 2

Voltage Regulators - Linear

Linear voltage regulators are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.