Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 2
Manufacturer
onsemiTexas Instruments
Packaging
Cut Tape (CT)Digi-Reel®Tape & Reel (TR)
Output Type
Adjustable (Fixed)Fixed
Voltage - Input (Max)
18V30V
Voltage - Output (Min/Fixed)
1.235V (3.3V)3.3V
Voltage - Output (Max)
29V-
Voltage Dropout (Max)
0.355V @ 100mA0.6V @ 100mA
Current - Quiescent (Iq)
2.5 µA120 µA
PSRR
80dB ~ 48dB (10Hz ~ 1MHz)-
Protection Features
Over Current, Over TemperatureOver Current, Over Temperature, Short Circuit
Package / Case
8-TSSOP, 8-MSOP (0.118", 3.00mm Width)SOT-23-5 Thin, TSOT-23-5
Supplier Device Package
5-TSOP8-VSSOP
Stocking Options
Environmental Options
Media
Marketplace Product
2Results

Showing
of 2
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Output Configuration
Output Type
Number of Regulators
Voltage - Input (Max)
Voltage - Output (Min/Fixed)
Voltage - Output (Max)
Voltage Dropout (Max)
Current - Output
Current - Quiescent (Iq)
Current - Supply (Max)
PSRR
Control Features
Protection Features
Operating Temperature
Mounting Type
Package / Case
Supplier Device Package
5-TSOP
NCP711ASN330T1G
IC REG LINEAR 3.3V 100MA 5TSOP
onsemi
9,408
In Stock
1 : $0.66000
Cut Tape (CT)
3,000 : $0.23807
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
ActivePositiveFixed118V3.3V-0.355V @ 100mA100mA2.5 µA-80dB ~ 48dB (10Hz ~ 1MHz)EnableOver Current, Over Temperature-40°C ~ 125°C (TJ)Surface MountSOT-23-5 Thin, TSOT-23-55-TSOP
8-VSSOP
LP2951CMM-3.3/NOPB
IC REG LIN POS ADJ 100MA 8VSSOP
Texas Instruments
12,994
In Stock
1 : $1.51000
Cut Tape (CT)
1,000 : $0.68630
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
ActivePositiveAdjustable (Fixed)130V1.235V (3.3V)29V0.6V @ 100mA100mA120 µA14 mA-EnableOver Current, Over Temperature, Short Circuit-40°C ~ 125°C (TJ)Surface Mount8-TSSOP, 8-MSOP (0.118", 3.00mm Width)8-VSSOP
Showing
of 2

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators


Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.