Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LT1964ES5-SD#TRMPBF IC REG LIN NEG ADJ 200MA TSOT23 Analog Devices Inc.	1,969 In Stock	1 : $4.60000 Cut Tape (CT) 500 : $2.88376 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Negative	Adjustable	1	-20V	-1.22V	-20V	0.49V @ 200mA	200mA	-	54dB (120Hz)	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	Surface Mount	SOT-23-5 Thin, TSOT-23-5	TSOT-23-5
L7805ABD2T-TR Positive voltage regulator ICs STMicroelectronics	87,532 In Stock	1 : $1.06000 Cut Tape (CT) 1,000 : $0.47995 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	35V	5V	-	2V @ 1A (Typ)	1.5A	6 mA	68dB (120Hz)	-	Over Temperature, Short Circuit	-40°C ~ 125°C	Surface Mount	TO-263-3, D²Pak (2 Leads + Tab), TO-263AB	D²PAK
NCP1117ST33T3G IC REG LINEAR 3.3V 1A SOT223 onsemi	0 In Stock Check Lead Time	1 : $0.68000 Cut Tape (CT) 4,000 : $0.24543 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	20V	3.3V	-	1.2V @ 800mA	1A	10 mA	64dB (120Hz)	-	Over Current, Over Temperature	0°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.