Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

ADP124ACPZ-3.3-R7 IC REG LINEAR 3.3V 500MA 8LFCSP Analog Devices Inc.	7,121 In Stock	1 : $2.60000 Cut Tape (CT) 3,000 : $0.79699 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	0.23V @ 500mA	500mA	105 µA	280 µA	60dB (10kHz ~ 100kHz)	Enable	Over Current, Over Temperature, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	-	-	Surface Mount	8-UFDFN Exposed Pad, CSP	8-LFCSP-UD (2x2)
NCP114AMX300TCG IC REG LINEAR 3V 300MA 4UDFN onsemi	8,515 In Stock 48,000 Factory	1 : $0.44000 Cut Tape (CT) 3,000 : $0.08127 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3V	-	0.22V @ 300mA	300mA	95 µA	-	75dB (1kHz)	Enable	Over Current, Over Temperature	-40°C ~ 85°C (TA)	-	-	Surface Mount	4-UDFN Exposed Pad	4-UDFN (1.0x1.0)
TPS74550PQWDRVRQ1 IC REG LINEAR 5V 500MA 6WSON Texas Instruments	22,909 In Stock	1 : $0.90000 Cut Tape (CT) 3,000 : $0.48125 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6V	5V	-	0.095V @ 500mA	500mA	36 µA	-	57dB ~ 35dB (1kHz ~ 1MHz)	Enable, Power Good	Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)	-40°C ~ 125°C (TJ)	Automotive	AEC-Q100	Surface Mount	6-WDFN Exposed Pad	6-WSON (2x2)

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.