Single FETs, MOSFETs

Showing

of 3

Mfr Part #	Quantity Available	Price	Tariff Status	Series	Package	Product Status	FET Type	Technology	Drain to Source Voltage (Vdss)	Current - Continuous Drain (Id) @ 25°C	Drive Voltage (Max Rds On, Min Rds On)	Rds On (Max) @ Id, Vgs	Vgs(th) (Max) @ Id	Gate Charge (Qg) (Max) @ Vgs	Vgs (Max)	Input Capacitance (Ciss) (Max) @ Vds	FET Feature	Power Dissipation (Max)	Operating Temperature	Grade	Qualification	Mounting Type	Supplier Device Package	Package / Case
BSS123NH6327XTSA1 MOSFET N-CH 100V 190MA SOT23-3 Infineon Technologies	106,264 In Stock	1 : $0.30000 Cut Tape (CT) 3,000 : $0.06081 Tape & Reel (TR)	-	OptiMOS™	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	N-Channel	MOSFET (Metal Oxide)	100 V	190mA (Ta)	4.5V, 10V	6Ohm @ 190mA, 10V	1.8V @ 13µA	0.9 nC @ 10 V	±20V	20.9 pF @ 25 V	-	500mW (Ta)	-55°C ~ 150°C (TJ)	Automotive	AEC-Q101	Surface Mount	PG-SOT23	TO-236-3, SC-59, SOT-23-3
IAUS300N08S5N012ATMA1 MOSFET N-CH 80V 300A HSOG-8 Infineon Technologies	5 In Stock	1 : $6.31000 Cut Tape (CT) 1,800 : $2.50138 Tape & Reel (TR)	-	OptiMOS™	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	N-Channel	MOSFET (Metal Oxide)	80 V	300A (Tc)	6V, 10V	1.2mOhm @ 100A, 10V	3.8V @ 275µA	231 nC @ 10 V	±20V	16250 pF @ 40 V	-	375W (Tc)	-55°C ~ 175°C (TJ)	Automotive	AEC-Q101	Surface Mount	PG-HSOG-8-1	8-PowerSMD, Gull Wing
PSMN1R9-80SSEJ APPLICATION SPECIFIC POWER MOSFE Nexperia USA Inc.	0 In Stock Check Lead Time	1 : $8.41000 Cut Tape (CT) 2,000 : $3.26670 Tape & Reel (TR)	-	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	N-Channel	MOSFET (Metal Oxide)	80 V	286A (Tc)	10V	1.9mOhm @ 25A, 10V	3.6V @ 1mA	232 nC @ 10 V	±20V	17140 pF @ 40 V	-	340W (Tc)	-55°C ~ 175°C (TJ)	-	-	Surface Mount	LFPAK88 (SOT1235)	SOT-1235

Showing

of 3

Single FET, MOSFETs

Single Field Effect Transistors (FETs) and Metal-Oxide-Semiconductor Field-Effect Transistors (MOSFETs) are types of transistors used to amplify or switch electronic signals.

A Single FET operates by controlling the flow of electrical current between the source and drain terminals through an electric field generated by a voltage applied to the gate terminal. The main advantage of FETs is their high input impedance, which makes them ideal for use in signal amplification and analog circuits. They are widely used in applications such as amplifiers, oscillators, and buffer stages in electronic circuits.

MOSFETs, a subtype of FETs, have a gate terminal insulated from the channel by a thin oxide layer, enhancing their performance and making them highly efficient. MOSFETs can be further categorized into two types:

n-channel MOSFETs: where electrons are the primary carriers.
p-channel MOSFETs: where holes are the primary carriers.

MOSFETs are preferred in many applications due to their low power consumption, high-speed switching, and ability to handle large currents and voltages. They are crucial in digital and analog circuits, including power supplies, motor drivers, and radio-frequency applications.

The operation of MOSFETs can be broken down into two modes:

Enhancement Mode: In this mode, the MOSFET is normally off when the gate-source voltage is zero. It requires a positive gate-source voltage (for n-channel) or a negative gate-source voltage (for p-channel) to turn on.
Depletion Mode: In this mode, the MOSFET is normally on when the gate-source voltage is zero. Applying a gate-source voltage of opposite polarity can turn it off.

MOSFETs offer several advantages, such as:

High Efficiency: They consume very little power and can switch states rapidly, making them highly efficient for power management applications.
Low On-Resistance: They have low resistance when turned on, which minimizes power loss and heat generation.
High Input Impedance: The insulated gate structure results in extremely high input impedance, making them ideal for high-impedance signal amplification.

In summary, single FETs, particularly MOSFETs, are fundamental components in modern electronics, known for their efficiency, speed, and versatility in a wide range of applications from low-power signal amplification to high-power switching and control.