Showing
1 - 3
of 3
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Output Configuration
Output Type
Number of Regulators
Voltage - Input (Max)
Voltage - Output (Min/Fixed)
Voltage - Output (Max)
Voltage Dropout (Max)
Current - Output
Current - Quiescent (Iq)
Current - Supply (Max)
PSRR
Control Features
Protection Features
Operating Temperature
Mounting Type
Package / Case
Supplier Device Package
SOT753
TPS70933DBVR
IC REG LINEAR 3.3V 150MA SOT23-5
Texas Instruments
25,999
In Stock
1 : $1.37000
Cut Tape (CT)
3,000 : $0.62560
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
ActivePositiveFixed130V3.3V-1.4V @ 150mA150mA2.05 µA350 µA80dB ~ 52dB (10Hz ~ 1kHz)EnableOver Current, Over Temperature, Reverse Current, Under Voltage Lockout (UVLO)-40°C ~ 125°CSurface MountSC-74A, SOT-753SOT-23-5
SOT223-3L
LM2937IMPX-15/NOPB
IC REG LINEAR 15V 400MA SOT223-4
Texas Instruments
6,432
In Stock
1 : $2.26000
Cut Tape (CT)
2,000 : $1.15840
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
ActivePositiveFixed126V15V-1V @ 50mA400mA2 mA20 mA--Over Temperature, Reverse Polarity, Short Circuit-40°C ~ 85°CSurface MountTO-261-4, TO-261AASOT-223-4
SOT753
TPS70950DBVR
IC REG LINEAR 5V 150MA SOT23-5
Texas Instruments
0
In Stock
1 : $1.37000
Cut Tape (CT)
3,000 : $0.62560
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
ActivePositiveFixed130V5V-1.2V @ 150mA150mA2.05 µA350 µA80dB ~ 52dB (10Hz ~ 1kHz)EnableOver Current, Over Temperature, Reverse Current, Under Voltage Lockout (UVLO)-40°C ~ 125°CSurface MountSC-74A, SOT-753SOT-23-5
Showing
1 - 3
of 3

Voltage Regulators - Linear


Linear voltage regulators are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.