Voltage Regulators - Linear

Results: 2

Filters

Stacked

Scrolling

Manufacturer

Diodes IncorporatedTexas Instruments

Packaging

BulkCut Tape (CT)Digi-Reel®Tape & Reel (TR)

Voltage - Input (Max)

6V16V

Voltage - Output (Min/Fixed)

1.8V3.3V

Voltage Dropout (Max)

0.37V @ 100mA0.7V @ 300mA

Current - Output

100mA300mA

Current - Quiescent (Iq)

90 µA95 µA

PSRR

63dB (1kHz)68dB ~ 54dB (100Hz ~ 10kHz)

Control Features

-Enable

Protection Features

Over Current, Over TemperatureOver Current, Over Temperature, Short Circuit

Operating Temperature

-40°C ~ 125°C-40°C ~ 85°C

Showing

of 2

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

AP2127K-1.8TRG1 IC REG LINEAR 1.8V 300MA SOT23-5 Diodes Incorporated	304,977 In Stock	1 : $0.39000 Cut Tape (CT) 3,000 : $0.08417 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6V	1.8V	-	0.7V @ 300mA	300mA	90 µA	-	68dB ~ 54dB (100Hz ~ 10kHz)	-	Over Current, Over Temperature	-40°C ~ 85°C	Surface Mount	SC-74A, SOT-753	SOT-23-5
LP2981A-33DBVR IC REG LINEAR 3.3V 100MA SOT23-5 Texas Instruments	0 In Stock 5,432 Marketplace 9,000 Factory Check Lead Time	1 : $0.90000 Cut Tape (CT) 3,000 : $0.34890 Tape & Reel (TR) 892 : $0.34000 Bulk	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel® Bulk	Active	Positive	Fixed	1	16V	3.3V	-	0.37V @ 100mA	100mA	95 µA	1.7 mA	63dB (1kHz)	Enable	Over Current, Over Temperature, Short Circuit	-40°C ~ 125°C	Surface Mount	SC-74A, SOT-753	SOT-23-5

Showing

of 2

Voltage Regulators - Linear

Linear voltage regulators are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.