Voltage Regulators - Linear, Low Drop Out (LDO) Regulators | Power Management (PMIC) | Electronic Components Distributor DigiKey

Showing

of 3

Mfr Part #	Quantity Available	Price	Tariff Status	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package
AZ1117CH-3.3TRG1 IC REG LINEAR 3.3V 1A SOT-223-3 Diodes Incorporated	65,389 In Stock	1 : $0.16000 Cut Tape (CT) 4,000 : $0.06191 Tape & Reel (TR)	-	AZ1117C	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	15V	3.3V	-	1.3V @ 800mA	1A	6 mA	70dB (120Hz)	-	Thermal Shutdown	-20°C ~ 125°C (TJ)	Surface Mount	TO-261-4, TO-261AA	SOT-223-3
LD1117S33TR IC REG LINEAR 3.3V 800MA SOT-223 STMicroelectronics	34,391 In Stock	1 : $0.34000 Cut Tape (CT) 2,500 : $0.14626 Tape & Reel (TR)	-	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	15V	3.3V	-	1.2V @ 800mA	800mA	10 mA	75dB (120Hz)	-	Over Current, Over Temperature	0°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223
NCP1117ST33T3G IC REG LINEAR 3.3V 1A SOT-223 onsemi	37,818 In Stock	1 : $0.58000 Cut Tape (CT) 4,000 : $0.25458 Tape & Reel (TR)	-	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	20V	3.3V	-	1.2V @ 800mA	1A	10 mA	64dB (120Hz)	-	Over Current, Over Temperature	0°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.