Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

TS78L05CS RLG IC REG LINEAR 5V 100MA 8SOP Taiwan Semiconductor Corporation	65,071 In Stock	1 : $0.42000 Cut Tape (CT) 2,500 : $0.14998 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	35V	5V	-	1.7V @ 100mA (Typ)	100mA	6 mA	49dB (120Hz)	Current Limit	Over Current, Over Temperature	-40°C ~ 85°C (TA)	Surface Mount	8-SOIC (0.154", 3.90mm Width)	8-SOP
LM340MP-5.0/NOPB IC REG LINEAR 5V 1.5A SOT223-4 Texas Instruments	6,871 In Stock	1 : $1.73000 Cut Tape (CT) 1,000 : $0.85087 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	35V	5V	-	2V @ 1A	1.5A	8 mA	70dB (120Hz)	-	Over Current, Short Circuit	0°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223-4
LT1763CS8-3.3#TRPBF IC REG LINEAR 3.3V 500MA 8SOIC Analog Devices Inc.	7,581 In Stock	1 : $8.63000 Cut Tape (CT) 2,500 : $3.55000 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	20V	3.3V	-	0.45V @ 500mA	500mA	-	65dB (120Hz)	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	Surface Mount	8-SOIC (0.154", 3.90mm Width)	8-SO

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.