Voltage Regulators - Linear, Low Drop Out (LDO) Regulators | Power Management (PMIC) | Electronic Components Distributor DigiKey

Showing

of 2

	Mfr Part #	Quantity Available	Price	Tariff Status	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package
	TL1963A-33DCYR IC REG LIN 3.3V 1.5A SOT-223-4 Texas Instruments	4,484 In Stock	1 : $2.77000 Cut Tape (CT) 2,500 : $1.45802 Tape & Reel (TR)	Tariff may apply if shipping to the United States	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	20V	3.3V	-	0.55V @ 1.5A	1.5A	1 mA	80 mA	63dB (120Hz)	Enable	Over Temperature, Reverse Polarity	-40°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223-4
	AZ1117CD-3.3TRG1 IC REG LINEAR 3.3V 1A TO252-3 Diodes Incorporated	11,834 In Stock 117,500 Factory	1 : $0.64000 Cut Tape (CT) 2,500 : $0.13599 Tape & Reel (TR)	-	AZ1117C	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	15V	3.3V	-	1.4V @ 800mA	1A	6 mA	-	70dB (120Hz)	-	Thermal Shutdown	-20°C ~ 125°C (TJ)	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	TO-252-3

Showing

of 2

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.