Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

AP7354-33W5-7 IC REG LINEAR 3.3V 150MA SOT25 Diodes Incorporated	50,302 In Stock 84,000 Factory	1 : $0.79000 Cut Tape (CT) 3,000 : $0.18305 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	0.35V @ 150mA	150mA	0.6 µA	-	-	Enable	Over Current	-40°C ~ 85°C (TA)	Surface Mount	SC-74A, SOT-753	SOT-25
MCP1804T-A002I/OT IC REG LINEAR 10V 150MA SOT23-5 Microchip Technology	14,421 In Stock	1 : $0.90000 Cut Tape (CT) 3,000 : $0.69000 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	28V	10V	-	0.95V @ 100mA	150mA	115 µA	125 µA	50dB (1kHz)	Enable	Over Current, Over Temperature	-40°C ~ 85°C	Surface Mount	SC-74A, SOT-753	SOT-23-5
TLV74010PDBVR IC REG LINEAR 1V 300MA SOT23-5 Texas Instruments	12,667 In Stock	1 : $0.10000 Cut Tape (CT) 3,000 : $0.03245 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	1V	-	1.3V @ 300mA	300mA	80 µA	-	67dB ~ 32dB (100Hz ~ 1MHz)	Enable	Over Current, Over Temperature, Under Voltage Lockout (UVLO)	-40°C ~ 125°C (TJ)	Surface Mount	SC-74A, SOT-753	SOT-23-5

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.