Power Distribution Switches, Load Drivers

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Switch Type	Number of Outputs	Ratio - Input:Output	Output Configuration	Output Type	Interface	Voltage - Load	Voltage - Supply (Vcc/Vdd)	Current - Output (Max)	Rds On (Typ)	Input Type	Features	Fault Protection	Operating Temperature	Mounting Type	Supplier Device Package	Package / Case

TPSI3050QDWZRQ1 AUTOMOTIVE REINFORCED ISOLATED S Texas Instruments	969 In Stock	1 : $5.33000 Cut Tape (CT) 1,000 : $2.81386 Tape & Reel (TR)	Automotive, AEC-Q100	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Relay, Solenoid Driver	2	1:1	High Side or Low Side	N-Channel	On/Off	10V	3V ~ 5.5V	3A	2.5Ohm	Non-Inverting	-	Over Temperature, UVLO	-40°C ~ 125°C (TA)	Surface Mount	8-SOIC	8-SOIC (0.295", 7.50mm Width)
MIC94091YC6-TR IC PWR SWITCH P-CHAN 1:1 SC70-6 Microchip Technology	20,363 In Stock	1 : $0.42000 Cut Tape (CT) 3,000 : $0.33000 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	General Purpose	1	1:1	High Side	P-Channel	On/Off	1.7V ~ 5.5V	Not Required	1.2A	130mOhm	Non-Inverting	Load Discharge	-	-40°C ~ 125°C (TJ)	Surface Mount	SC-70-6	6-TSSOP, SC-88, SOT-363
BD82006FVJ-MGE2 IC PWR SWITCH N-CHAN 1:1 8TSSOP Rohm Semiconductor	139 In Stock	1 : $1.26000 Cut Tape (CT) 2,500 : $0.53449 Tape & Reel (TR)	Automotive, AEC-Q100	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	USB Switch	1	1:1	High Side	N-Channel	On/Off	2.7V ~ 5.5V	Not Required	3A	70mOhm	Non-Inverting	-	Current Limiting (Fixed), Over Temperature, UVLO	-40°C ~ 85°C (TA)	Surface Mount	8-TSSOP-BJ	8-TSSOP, 8-MSOP (0.118", 3.00mm Width)

Showing

of 3

Power Distribution Switches, Load Drivers

Products in this family are solid-state devices used to connect or interrupt the flow of current to a supported load, under the direction of a logic-level control signal that is of itself incapable or unsuitable for supplying the load. They integrate the semiconductor switching device used to interrupt current flow and incorporate additional supporting components/functions such as over-voltage clamping, current limiting, and under-voltage lockouts, which differentiate them from similar IC and discrete components.