Power Distribution Switches, Load Drivers

Showing

of 4

Mfr Part #	Quantity Available	Price	Tariff Status	Series	Package	Product Status	Switch Type	Number of Outputs	Ratio - Input:Output	Output Configuration	Output Type	Interface	Voltage - Load	Voltage - Supply (Vcc/Vdd)	Current - Output (Max)	Rds On (Typ)	Input Type	Features	Fault Protection	Operating Temperature	Grade	Qualification	Mounting Type	Supplier Device Package	Package / Case
NCV8408BDTRKG IC PWR DRIVER N-CHANNEL 1:1 DPAK onsemi	1,396 In Stock	1 : $0.99000 Cut Tape (CT) 2,500 : $0.47163 Tape & Reel (TR)	-	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	General Purpose	1	1:1	Low Side	N-Channel	On/Off	42V (Max)	Not Required	10A	55mOhm	-	-	Open Load Detect, Over Temperature, Over Voltage	-40°C ~ 150°C (TJ)	Automotive	AEC-Q100	Surface Mount	DPAK	TO-252-3, DPAK (2 Leads + Tab), SC-63
NCV380LMUAJAATBG IC PWR SWITCH P-CHAN 1:1 6UDFN onsemi	5,660 In Stock	1 : $1.36000 Cut Tape (CT) 3,000 : $0.32464 Tape & Reel (TR)	-	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	General Purpose	1	1:1	High Side	P-Channel	On/Off	2.5V ~ 5.5V	Not Required	Adjustable	55mOhm	Non-Inverting	Enable Input Low, Slew Rate Controlled, Status Flag	Current Limiting (Adjustable), UVLO	-40°C ~ 125°C (TJ)	Automotive	AEC-Q100	Surface Mount	6-UDFN (2x2)	6-UDFN Exposed Pad
SI1869DH-T1-GE3 IC PWR SWITCH P-CHAN 1:1 SC70-6 Vishay Siliconix	5,584 In Stock	1 : $0.49000 Cut Tape (CT) 3,000 : $0.21579 Tape & Reel (TR)	Tariff may apply if shipping to the United States	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Obsolete	General Purpose	1	1:1	High Side	P-Channel	On/Off	1.8V ~ 20V	-	1.2A	132mOhm	-	Slew Rate Controlled	-	-55°C ~ 150°C (TJ)	-	-	Surface Mount	SC-70-6	6-TSSOP, SC-88, SOT-363
VNI4140KTR-32 IC PWR DRVR N-CHAN 1:1 PWRSSO24 STMicroelectronics	0 In Stock Check Lead Time	1 : $5.12000 Cut Tape (CT) 1,000 : $2.62500 Tape & Reel (TR)	-	VIPower™	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	General Purpose	4	1:1	High Side	N-Channel	On/Off	10.5V ~ 36V	Not Required	1A	80mOhm (Max)	Non-Inverting	Status Flag	Current Limiting (Fixed), Over Temperature	-40°C ~ 125°C (TJ)	-	-	Surface Mount	PowerSSO-24 Exposed Bottom Pad	24-BSOP (0.295", 7.50mm Width) Exposed Pad

Showing

of 4

Products in this family are solid-state devices used to connect or interrupt the flow of current to a supported load, under the direction of a logic-level control signal that is of itself incapable or unsuitable for supplying the load. They integrate the semiconductor switching device used to interrupt current flow and incorporate additional supporting components/functions such as over-voltage clamping, current limiting, and under-voltage lockouts, which differentiate them from similar IC and discrete components.