Power Distribution Switches, Load Drivers

Showing

of 4

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Switch Type	Number of Outputs	Ratio - Input:Output	Output Configuration	Output Type	Interface	Voltage - Load	Voltage - Supply (Vcc/Vdd)	Current - Output (Max)	Rds On (Typ)	Input Type	Features	Fault Protection	Operating Temperature	Mounting Type	Supplier Device Package	Package / Case

FPF2702MX IC PWR SWITCH N-CHANNEL 1:1 8SO onsemi	7,143 In Stock	1 : $3.56000 Cut Tape (CT) 2,500 : $1.78523 Tape & Reel (TR)	AccuPower™	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Last Time Buy	General Purpose	1	1:1	High Side	N-Channel	On/Off	2.8V ~ 36V	Not Required	2A	88mOhm	Inverting	Power Good, Slew Rate Controlled, Status Flag	Current Limiting (Adjustable), Over Temperature, UVLO	-40°C ~ 85°C (TA)	Surface Mount	8-SOIC	8-SOIC (0.154", 3.90mm Width)
AP22916BCA4-7 LOAD SWITCH X1-WLB0808-4 T&R 3K Diodes Incorporated	10,904 In Stock	1 : $0.45000 Cut Tape (CT) 3,000 : $0.12750 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	General Purpose	1	1:1	High Side	P-Channel	On/Off	1.3V ~ 5.5V	Not Required	2A	60mOhm	Non-Inverting	Load Discharge, Slew Rate Controlled	Over Temperature, Reverse Current, UVLO	-40°C ~ 85°C (TA)	Surface Mount	X1-WLB0808-4	4-XFBGA, WLBGA
FDC6324L IC PWR SWITCH P-CH 1:1 SUPERSOT6 onsemi	0 In Stock	1 : $0.69000 Cut Tape (CT) 3,000 : $0.26698 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel® Bulk	Active	General Purpose	1	1:1	High Side	P-Channel	On/Off	3V ~ 20V	1.5V ~ 8V	1.5A	-	Non-Inverting	-	-	-55°C ~ 150°C (TJ)	Surface Mount	SuperSOT™-6	SOT-23-6 Thin, TSOT-23-6
NCP45520IMNTWG-H IC PWR SWITCH N-CHAN 1:1 8DFN onsemi	0 In Stock	1 : $1.62000 Cut Tape (CT) 3,000 : $0.68650 Tape & Reel (TR)	ecoSWITCH™	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	General Purpose	1	1:1	High Side	N-Channel	On/Off	0.5V ~ 13.5V	3V ~ 5.5V	10.5A	12.8mOhm	Non-Inverting	Slew Rate Controlled	Over Temperature, UVLO	-40°C ~ 85°C (TA)	Surface Mount	8-DFN (2x2)	8-VFDFN Exposed Pad

Showing

of 4

Products in this family are solid-state devices used to connect or interrupt the flow of current to a supported load, under the direction of a logic-level control signal that is of itself incapable or unsuitable for supplying the load. They integrate the semiconductor switching device used to interrupt current flow and incorporate additional supporting components/functions such as over-voltage clamping, current limiting, and under-voltage lockouts, which differentiate them from similar IC and discrete components.