DC DC Converters

Results: 3
Stocking Options
Environmental Options
Media
Exclude
3Results
Applied FiltersRemove All
Showing
of 3
Mfr Part #
Quantity Available
Price
Tariff Status
Series
Package
Product Status
Type
Number of Outputs
Voltage - Input (Min)
Voltage - Input (Max)
Voltage - Output 1
Voltage - Output 2
Voltage - Output 3
Voltage - Output 4
Current - Output (Max)
Power (Watts)
Applications
Features
Operating Temperature
Efficiency
Mounting Type
Package / Case
Size / Dimension
Supplier Device Package
Control Features
Approval Agency
T31SN12008NNFC
T31SN12008NNFA
DC DC CONVERTER 3.3-16.5V 100W
Delta Electronics
20
In Stock
1 : $22.85000
Tray
-
Tray
Active
Non-Isolated PoL Module
1
9V
53V
3.3 ~ 16.5V
-
-
-
8A
100 W
ITE (Commercial)
Adjustable Output, Remote On/Off, Remote Sense
-40°C ~ 85°C (With Derating)
96.5%
Through Hole
Module
0.92" L x 0.75" W x 0.38" H (23.4mm x 19.1mm x 9.6mm)
Thirty-Second Brick
Enable, Active Low
-
T31SN12008NNFA
T31SN12008NMFA
DC DC CONVERTER 3.3-16.5V 100W
Delta Electronics
98
In Stock
1 : $24.66000
Strip
-
Strip
Active
Non-Isolated PoL Module
1
9V
53V
3.3 ~ 16.5V
-
-
-
8A
100 W
ITE (Commercial)
Adjustable Output, Remote On/Off, Remote Sense
-40°C ~ 85°C (With Derating)
96.5%
Surface Mount
Module
0.92" L x 0.75" W x 0.40" H (23.4mm x 19.1mm x 10.1mm)
Thirty-Second Brick
Enable, Active Low
-
T31SN12008NNFC
T31SN12008NNFC
DC DC CONVERTER 3.3-16.5V 100W
Delta Electronics
0
In Stock
Check Lead Time
1 : $31.48000
Tray
-
Tray
Active
Non-Isolated PoL Module
1
9V
53V
3.3 ~ 16.5V
-
-
-
8A
100 W
ITE (Commercial)
Adjustable Output, Remote On/Off, Remote Sense
-40°C ~ 85°C (With Derating)
96.5%
Through Hole
Module
1.09" L x 0.91" W x 0.50" H (27.6mm x 23.1mm x 12.7mm)
Thirty-Second Brick
Enable, Active Low
-
Showing
of 3

DC DC Converters

Board mount DC DC converters are compact switching modules (switching regulators) soldered or mounted directly onto a printed circuit board that convert one DC voltage to another (higher, lower, or inverted) while often providing regulation, filtering, and if needed isolation. These modules are used in distributed power architectures to efficiently step-down (buck) or step-up (boost) voltages close to the load for improved efficiency.

Types of Converters

  • Isolated Modules - provide galvanic isolation between input and output, essential for safety boundaries, noise immunity, and breaking ground loops.
  • Non-Isolated - cost and efficiency optimized modules where isolation isn’t needed.
  • Linear Regulator Replacement - Drop in switching regulators designed to replace traditional linear regulators.