Crystals

Results: 2

Filters

Stacked

Scrolling

Manufacturer

ECS Inc.NDK America, Inc.

Series

ECX-2236NX2012SA

Packaging

Cut Tape (CT)Digi-Reel®Tape & Reel (TR)

Type

MHz CrystalkHz Crystal (Tuning Fork)

Frequency

32.768 kHz24 MHz

Frequency Stability

±10ppm-

Frequency Tolerance

±10ppm±20ppm

Load Capacitance

8pF12.5pF

ESR (Equivalent Series Resistance)

60 Ohms80 kOhms

Operating Temperature

-40°C ~ 85°C-20°C ~ 70°C

Package / Case

2-SMD, No Lead4-SMD, No Lead

Size / Dimension

0.081" L x 0.047" W (2.05mm x 1.20mm)0.098" L x 0.079" W (2.50mm x 2.00mm)

Height - Seated (Max)

0.024" (0.60mm)0.026" (0.65mm)

Showing

of 2

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Type	Frequency	Frequency Stability	Frequency Tolerance	Load Capacitance	ESR (Equivalent Series Resistance)	Operating Mode	Operating Temperature	Ratings	Mounting Type	Package / Case	Size / Dimension	Height - Seated (Max)

ECS-240-8-36CKM-TR CRYSTAL 24.0000MHZ 8PF SMD ECS Inc.	238,420 In Stock	1 : $1.02000 Cut Tape (CT) 1,000 : $0.59085 Tape & Reel (TR)	ECX-2236	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	MHz Crystal	24 MHz	±10ppm	±10ppm	8pF	60 Ohms	Fundamental	-20°C ~ 70°C	-	Surface Mount	4-SMD, No Lead	0.098" L x 0.079" W (2.50mm x 2.00mm)	0.026" (0.65mm)
NX2012SA-32.768K-STD-MUB-1 CRYSTAL 32.7680KHZ 12.5PF SMD NDK America, Inc.	125,453 In Stock	1 : $0.84000 Cut Tape (CT) 3,000 : $0.46571 Tape & Reel (TR)	NX2012SA	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	kHz Crystal (Tuning Fork)	32.768 kHz	-	±20ppm	12.5pF	80 kOhms	Fundamental	-40°C ~ 85°C	-	Surface Mount	2-SMD, No Lead	0.081" L x 0.047" W (2.05mm x 1.20mm)	0.024" (0.60mm)

Showing

of 2

Crystals

Crystal products are passive components most commonly used as time or frequency references in electronic systems. Consisting of a piezoelectric crystal that mechanically vibrates at a known frequency, their use requires provision of an external oscillator circuit with carefully designed capacitance, drive voltage, and series resistance characteristics, to generate a signal at the indicated crystal frequency that operates successfully over the operating temperature range, without damaging the crystal element. Active devices which integrate this additional necessary circuitry are considered oscillators and are catalogued separately.