Common Mode Chokes

Results: 4
Stocking Options
Environmental Options
Media
Exclude
4Results
Applied FiltersRemove All
Showing
of 4
Mfr Part #
Quantity Available
Price
Tariff Status
Series
Package
Product Status
Filter Type
Number of Lines
Impedance @ Frequency
Inductance @ Frequency
Current Rating (Max)
DC Resistance (DCR) (Max)
Voltage Rating - DC
Voltage Rating - AC
Operating Temperature
Ratings
Approval Agency
Features
Mounting Type
Size / Dimension
Height (Max)
Package / Case
SRF3225TAC
SRF3225TAC-510Y
CMC 51UH 200MA 2LN 2.6KOHM SMD
Bourns Inc.
2,078
In Stock
1 : $0.59000
Cut Tape (CT)
2,000 : $0.31108
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
-
2
2.6 kOhms @ 10 MHz
51 µH @ 100 kHz
200mA
700mOhm
80V
-
-55°C ~ 150°C
AEC-Q200
-
-
Surface Mount
0.126" L x 0.098" W (3.20mm x 2.50mm)
0.098" (2.50mm)
Horizontal, 4 PC Pad
SRF3225TAC
SRF3225TAC-110Y
CMC 11UH 300MA 2LN 550OHM SMD
Bourns Inc.
1,305
In Stock
1 : $0.59000
Cut Tape (CT)
2,000 : $0.31108
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
-
2
550 Ohms @ 10 MHz
11 µH @ 100 kHz
300mA
400mOhm
80V
-
-55°C ~ 150°C
AEC-Q200
-
-
Surface Mount
0.126" L x 0.098" W (3.20mm x 2.50mm)
0.098" (2.50mm)
Horizontal, 4 PC Pad
SRF3225TAC
SRF3225TAC-220Y
CMC 22UH 250MA 2LN 1.1KOHM SMD
Bourns Inc.
1,985
In Stock
1 : $0.59000
Cut Tape (CT)
2,000 : $0.31108
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
-
2
1.1 kOhms @ 10 MHz
22 µH @ 100 kHz
250mA
500mOhm
80V
-
-55°C ~ 150°C
AEC-Q200
-
-
Surface Mount
0.126" L x 0.098" W (3.20mm x 2.50mm)
0.098" (2.50mm)
Horizontal, 4 PC Pad
SRF3225TAC
SRF3225TAC-101Y
CMC 100UH 150MA 2LN 5.1KOHM SMD
Bourns Inc.
104
In Stock
1 : $0.59000
Cut Tape (CT)
2,000 : $0.31108
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
-
2
5.1 kOhms @ 10 MHz
100 µH @ 100 kHz
150mA
1.5Ohm
80V
-
-55°C ~ 150°C
AEC-Q200
-
-
Surface Mount
0.126" L x 0.098" W (3.20mm x 2.50mm)
0.098" (2.50mm)
Horizontal, 4 PC Pad
Showing
of 4

Common Mode Chokes

A common mode choke is an electrical filter that blocks high frequency noise common to two or more data or power lines while allowing the desired DC or low-frequency signal to pass. Common mode (CM) noise current is typically radiated from sources such as unwanted radio signals, unshielded electronics, inverters and motors. Left unfiltered, this noise presents interference problems in electronics and electrical circuits.