Chip Resistor - Surface Mount

Results: 4

Filters

Stacked

Scrolling

Packaging

Cut Tape (CT)Digi-Reel®Tape & Reel (TR)

Resistance

25 Ohms50 Ohms100 Ohms200 Ohms

Applied FiltersRemove All

Showing

of 4

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Resistance	Tolerance	Power (Watts)	Composition	Features	Temperature Coefficient	Operating Temperature	Package / Case	Supplier Device Package	Size / Dimension	Height - Seated (Max)	Number of Terminations	Failure Rate

504L25R0FTNCFT RES SMD 25 OHM 1% 1/8W 0402 American Technical Ceramics	0 In Stock	Obsolete	ATC504	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Obsolete	25 Ohms	±1%	0.125W, 1/8W	Thin Film	RF, High Frequency	-50/ -150ppm/°C	-40°C ~ 125°C	0402 (1005 Metric)	0402	0.039" L x 0.020" W (1.00mm x 0.50mm)	0.024" (0.60mm)	2	-
504L50R0FTNCFT RES SMD 50 OHM 1% 1/8W 0402 American Technical Ceramics	0 In Stock	Obsolete	ATC504	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Obsolete	50 Ohms	±1%	0.125W, 1/8W	Thin Film	RF, High Frequency	-50/ -150ppm/°C	-40°C ~ 125°C	0402 (1005 Metric)	0402	0.039" L x 0.020" W (1.00mm x 0.50mm)	0.024" (0.60mm)	2	-
504L1000FTNCFT RES SMD 100 OHM 1% 1/8W 0402 American Technical Ceramics	0 In Stock	Obsolete	ATC504	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Obsolete	100 Ohms	±1%	0.125W, 1/8W	Thin Film	RF, High Frequency	-50/ -150ppm/°C	-40°C ~ 125°C	0402 (1005 Metric)	0402	0.039" L x 0.020" W (1.00mm x 0.50mm)	0.024" (0.60mm)	2	-
504L2000FTNCFT RES SMD 200 OHM 1% 1/8W 0402 American Technical Ceramics	0 In Stock	Obsolete	ATC504	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Obsolete	200 Ohms	±1%	0.125W, 1/8W	Thin Film	RF, High Frequency	-50/ -150ppm/°C	-40°C ~ 125°C	0402 (1005 Metric)	0402	0.039" L x 0.020" W (1.00mm x 0.50mm)	0.024" (0.60mm)	2	-

Showing

of 4

Chip Resistor - Surface Mount

Resistors provide opposition to current flow, in a manner that is proportional to the electric potential (voltage) imposed across them, and which is ideally unaffected by signal frequency or changes in temperature. Resistors described as surface mount chip types are designed to be affixed to the surface of a printed circuit board and incorporate a single resistor per device package.