USD

Press-Fit ICMs for 1GBase-T Ethernet Designs

Bel Magnetics Solutions ICMs reduce manufacturing costs by using wave or reflow soldering in their assembly process

Image of TRP Connector's Press-Fit ICMs for 1GBase-T Ethernet DesignsThe Bel Magnetics Solutions Press-Fit ICM series from TRP and Bel Fuse are intended for customers looking for ways to reduce manufacturing costs by using wave or reflow soldering in their assembly process.  Inserting press-fit ICMs after the soldering process helps to reduce the potential for contaminants entering the connector and affecting performance. This series of ICMs can also be used on PCBA that is thicker than 0.150” (3.81 mm) where normal solder pin lengths are too short for proper soldering.

Features
  • Meets all IEEE 802.3 1GBase-T electrical requirements including RL, IL, Hi-pot, and common mode parameters
  • Robust "eye-of the needle" design
  • Operating temperature: 0°C to +70°C or as specified
  • UL recognized
  • 100% Hi-pot tested in production

TRP Connector Press-Fit ICMs for 1GBase-T Ethernet Designs

ImageManufacturer Part NumberDescriptionAvailable QuantityView Details
MAGJACK 1PORT 1GBT PRESS-FIT1840772-8MAGJACK 1PORT 1GBT PRESS-FIT180 - ImmediateView Details
MAGJACK 2PORT 1GBT PRESS-FIT1840572-6MAGJACK 2PORT 1GBT PRESS-FIT180 - ImmediateView Details
MAGJACK 2PORT 1GBT PRESS-FIT1840572-7MAGJACK 2PORT 1GBT PRESS-FIT180 - ImmediateView Details

Bel Fuse Inc. Press-Fit ICMs for 1GBase-T Ethernet Designs

ImageManufacturer Part NumberDescriptionAvailable QuantityView Details
MAGJACK 2PORT 1GBT PRESS-FIT08G0-281D-GUAMAGJACK 2PORT 1GBT PRESS-FIT147 - ImmediateView Details
Published: 2019-11-06