TE0722 Zynq DIPFORTy1 "Soft Propeller" Module

Trenz Electronic's TE0722 DIPFORTy1 "Soft Propeller" module is based on the Xilinx Zynq-7000, a system on chip which contains a FPGA and a Dual Core ARM® A9+ processor

Image of Trenz Electronic's TE0722 Zynq DIPFORTy1 'Soft Propeller' ModuleTrenz Electronic's system on module, or SoM TE0722-02I is an industrial-grade Zynq-7000 SoC module. It integrates a Xilinx XC7Z010-CLG225, 16 MByte SPI Flash in a 40 pin DIP form factor with a size of 1.8 cm x 5.1 cm. The Zynq SoC uses a Dual Core ARM A9, in addition to FPGA fabric.

TE0722 Wiki
TE0722 Block Diagram
Trenz Catalog - All Porgrammable FPGA and SoC Modules

  • Xilinx ZYNQ-7: XC7Z010-CLG225
    • Dual Core ARM A9+
    • 16 MByte SPI Flash (primary boot)
    • 33.333 MHz clock (MEMS Oscillator)
  • DIP40 form factor
    • 2 x 20 holes for socket pins or pin-header
    • Size: 18 mm x 51 mm
  • 3.3 V single supply
  • RGB LED (PL I/O connected)
  • "Done" LED (inverted polarity)
  • Total user accessible PL I/O: 46 (+3 Input only)
    • DIP40 header pins: 34 I/O
    • XMOD J1: 6 I/O
    • XMOD J2: JTAG + 2 I/O (or 3 input + 2 I/O)
    • XMOD J3: 4 I/O
  • MicroSD card socket (MIO, ZYNQ secondary boot media)
  • Sil1143 proximity and ambient light sensor

Other assembly options for cost or performance optimization plus high volume prices available on request.

TE0722 Zynq DIPFORTy1 "Soft Propeller" Module

ImageManufacturer Part NumberDescriptionModule/Board TypeCore ProcessorCo-ProcessorAvailable QuantityView Details
IC MODULE CORTEX-A9 33MHZ 16MBTE0722-02IIC MODULE CORTEX-A9 33MHZ 16MBMCU, FPGAARM Cortex-A9Zynq-7000 (Z-7010)27 - ImmediateView Details
Published: 2016-09-07