STLINK-V3SET Modular In-Circuit Debugger and Programmer

STMicro's faster and more flexible STLink probe eases STM8 and STM32 programming

Image of STMicro's STLINK-V3SET Probe for MCUsSTMicro's next-generation STLink-V3SET probe delivers enhanced flexibility and efficiency for debugging and programming microcontrollers. On top of JTAG/SWD/SWIM typical interfaces, a virtual com port and a multipath bridge allow the STLink-V3SET to communicate through the microcontroller UART, I2C, SPI, and CAN interfaces as well as GPIOs. This lets developers conveniently monitor run-time data on the host PC and simplify product maintenance with firmware update using a bootloader. With three times the performance and an intuitive drag-and-drop Flash memory programming, the STLink-V3SET helps users save development time and easily reprogram devices anywhere, on the bench or in the field.

  • Stand-alone probe with modular extensions
  • Self-powered through a USB connector (Micro-B)
  • USB 2.0 high-speed compatible interface
  • Direct firmware update support (DFU)
  • Drag-and-drop Flash programming
  • Two color LEDs for communication and power
  • JTAG/serial wire debugging (SWD) specific features:
    • 3 V to 3.6 V application voltage support and 5 V tolerant inputs
    • JTAG communication support
    • SWD and serial wire viewer (SWV) communication support
    • Flat cables STDC14 to MIPI10/STDC14/MIPI20 (connectors with 1.27 mm pitch)
  • SWIM specific features (only available with adapter board MB1440):
    • 1.65 V to 5.5 V application voltage support
    • SWIM header (2.54 mm pitch)
    • SWIM low-speed and high-speed modes support
  • Multi-path bridge USB to SPI/UART/I2C/CAN/GPIOs specific features:
    • 3 V to 3.6 V application voltage support and 5 V tolerant inputs
    • Signals available on adapter board only (MB1440)
  • Virtual COM port (VCP) specific features:
    • VCP frequency up to 15 MHz
    • Available on STDC14 debug connector (not available on MIPI10)
    • 3 V to 3.6 V application voltage support on the UART interface and 5 V tolerant inputs

STLINK-V3SET Modular In-Circuit Debugger and Programmer

ImageManufacturer Part NumberDescriptionFor Use With/Related ProductsPart StatusTypeAvailable QuantityView Details
STLINK V3 MODULAR IN-CIRCUIT DEBSTLINK-V3SETSTLINK V3 MODULAR IN-CIRCUIT DEBSTM8, STM32ActiveDebugger, Programmer (In-Circuit/In-System)419 - ImmediateView Details
Published: 2018-12-05