Uno MCU Board
ATmega328-based microcontroller board from Arduino
The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which six can be used as PWM outputs), six analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
The Arduino Uno differs from all preceding boards because it does not use the FTDI USB-to-serial driver chip. Instead, it features the ATmega8U2 programmed as a USB-to-serial converter. Revision 2 of the Arduino Uno board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.