Label Holder KM Datasheet by Murrplastik Systems, Inc.

E H E u a 6 E fin Q Q yr... .;
1
Label holders
© Murrplastik Systemtechnik GmbH • proID_60087~20171003~890286~acs_mod_km_zuelle
Single wire, cable, and conduit labelling
Label holder KM (standard holder)
PRODUCT INFORMATION SPECIFICATIONS
Label holder for wire, cable and conduit
labels. KM label holder accommodate BK
idents and type KS as well as type KSO
labels.
The label holders are fixed in place with
cable ties.
Polyvinyl chloride (PVC)
-40 – 60 °C
V0
Standard label holder
Type Order No. Colour Length
mm (A)
Width
mm (B)
Recommended
Label
plate
No.
idents
BK23 / BK30
Cable ties
max. width
mm
Recommended
min. diameter
mm (C)
Pack
qty.
Labelling across the cable/the hose, single line of print
KM 3 86321018 Transparent 16.00 4.00 KS 4/12 6 / 5 5.00 5.00 2000
Labelling lengthwise to the cable/the hose, single line of print
KM 4/12 86321015 Transparent 12.00 4.00 KS 4/x 5 / 3 5.00 5.00 2000
KM 4/18 86321019 Transparent 18.00 4.00 KS 4/x 7 / 6 5.00 5.00 2000
KM 4/23 86321020 Transparent 23.00 4.00 KS 4/x 10 / 7 5.00 5.00 1000
KM 4/31 86321024 Transparent 31.00 4.00 KS 4/x 13 / 10 5.00 5.00 1000
Labelling lengthwise to the cable/the hose, one or more lines of print
KM 9/20 86321040 Transparent 20.00 9.00 KSO 20x9 5.00 10.00 1000
KM 9/35 86321042 Transparent 35.00 9.00 KSO 35x9 5.00 10.00 500
KM 9/70 86321045 Transparent 70.00 9.00 KSO 70x9 5.00 10.00 250
KM 15/27 86321056 Transparent 27.00 15.00 KS 15/27 5.00 14.00 500
KM 15/49 86321058 Transparent 49.00 15.00 KS 15/49 5.00 14.00 250
KM 15/67 86321060 Transparent 67.00 15.00 KS 15/67 5.00 14.00 125
Pre-configured label holder, equipped with KB 55 cable ties
KKM 4/12 86321048 Transparent 12.00 4.00 KS 4/x 5 / 4 5.00 5.00 250
KKM 4/23 86321050 Transparent 23.00 4.00 KS 4/x 10 / 7 5.00 5.00 250
KKM 9/20 86321052 Transparent 20.00 9.00 KSO 20x9 5.00 10.00 250
KKM 9/35 86321054 Transparent 35.00 9.00 KSO 35x9 5.00 10.00 250
EJ E‘J g] $6 mu rr lastik P fl
2
Label holders
© Murrplastik Systemtechnik GmbH • proID_60087~20171003~890286~acs_mod_km_zuelle
Single wire, cable, and conduit labelling
Label holder KM (standard holder)
MATERIAL PROPERTIES
Polyvinyl chloride (PVC)
THERMAL PROPERTIES
Temperature / temperature range
-40 – 60 °C
FIRE BEHAVIOUR
Fire classification
V0
GENERAL TECHNICAL DATA
Standard label holder
INSTALLATION METHOD
Cable tie system with sleeves
All details given in our sales material prospectuses and catalogues as well as the information available online are based on our current knowledge of the products described.
The electronic data and files made available by Murrplastik, particularly CAD files are based on our current knowledge of the product described.
A legally binding assurance of certain properties or the suitability for a certain purpose can not be determined from this information.
All information with respect to the chemical and physical properties of Murrplastik products as well as application advice given verbally, in writing or by tests, is given to the best of our knowledge.
This does not free the purchaser of carrying out their own inspections and tests in order to determine the suitability of a product for a specific purpose.
Murrplastik accepts no responsibility for the available information being up-to-date, correct or complete. Neither do we accept responsibility for the quality of this information.
Murrplastik accepts no liability for damage caused as a result of using our products.
Murrplastik reserves the right to make technical changes and improvements through constant further development of products and services.
Our General Terms and Conditions apply.