NSVR351SDSA3 Datasheet by onsemi

0N Semiconductor® www.0nsemi.com % l—I ‘ 2 (Ta : 25°cl a l_l l_l Symbol Value Unll VRM 5 V MARKING l; 30 mA g TJVTSIg —55m +125 “c 1'"; 1'"; Stresses exceedlng those lined in me Maxlmum Ralings cable may damage me El El device. ll any of mass limlls ale exceededl device lunmionalily should ml be assumedl damage may Dean! and rellability may be alfacted. ORDERING IN See aelallea orderlrlg and shlp \hls dale sheet,
© Semiconductor Components Industries, LLC, 2017
May, 2018 − Rev.0
1Publication Order Number:
NSVR351SDSA3/D
NSVR351SDSA3
Schottky Barrier Diode
for Mixer and Detector
Description
This schottky barrier diode is designed to realize compact and
efficient designs. Two schottky barrier diodes are incorporated in one
SC−59 package. The use of dual schottky barrier diodes can reduce
both system cost and board space. This schottky barrier diode is
AEC−Q101 qualified and PPAP capable for automotive applications.
Features
•Series Connection of 2 Elements in a Small−Sized Package
•Small Interterminal Capacitance (C = 0.69 pF typ)
•Small Forward Voltage (VF = 0.23 V max)
•These Devices are Pb−Free, Halogen Free and are RoHS Compliant
•AEC−Q101 Qualified and PPAP Capable
Typical Applications
•Level Detector for Radio
Specifications
ABSOLUTE MAXIMUM RATINGS (Ta = 25°C)
Parameter Symbol Value Unit
Reverse Voltage VRM 5 V
Forward Current IF30 mA
Operating Junction
and Storage Temperature
TJ, TStg −55 to +125 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
www.onsemi.com
See detailed ordering and shipping information on page 2 of
this data sheet.
ORDERING INFORMATION
MARKING DIAGRAM
ELECTRICAL CONNECTION
1 : Anode
2 : Cathode
3 : Anode / Cathode
5 V, 30 mA
C = 0.69 pF typ
Shottky Barrier Diode
SC−59 / CP3
CASE 318BJ
12
3
12
3
CH
LOT No.
LOT No.
www onsem' com
NSVR351SDSA3
www.onsemi.com
2
ELECTRICAL CHARACTERISTICS (Ta = 25°C (Note 1))
Symbol Parameter Conditions
Value
Unit
Min Typ Max
VF Forward Voltage IF = 1 mA − − 0.23 V
IF Forward Current VF = 0.5 V 30 − − mA
IR Reverse Current VR = 0.5 V − − 25 mA
C Interterminal Capacitance VR = 0.2 V, f = 1 MHz −0.69 0.9 pF
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. The specifications shown above are for each individual diode.
ORDERING INFORMATION
Device Order Number Marking Package Type Shipping†
NSVR351SDSA3T1G CH SC−59 / CP3
(Pb−Free / Halogen Free)
3,000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www onsem' com
NSVR351SDSA3
www.onsemi.com
3
CHARACTERISTICS
VF
, Forward Voltage (V)
IF
, Forward Current (mA)
Figure 1. IF − VF
VR, Reverse Voltage (V)
IR, Reverse Current (mA)
Figure 2. IR − VR
Figure 3. C − VR
VR, Reverse Voltage (V)
C, Interterminal Capacitance (pF)
From top
Ta =100°C
75°C
50°C
25°C
0°C
−25°C
−50°C
From left side
Ta =100°C
75°C
50°C
25°C
0°C
−25°C
−50°C
f = 1 MHz
0.010
2
3
5
7
0.1
2
3
5
7
1.0
2
3
5
7
10
2
3
5
7
100
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.10
2
3
5
7
1.0
2
3
5
7
10
2
3
5
7
100
2
3
5
7
1000
123 456
0.1
0.1
2
3
5
7
1.0
2
1.023456789 2345
0N Semiwndudw" 4w 'Fer addmonal mlormamn on our Pb- Free s1rateg delaus, p‘ease download me ON Semmnuumo Mounhng Techmques Reference Manual, SOL ON Semxcunduclm and ave Mademavks av Semxcanduclur Campunenls Inausmes LLC dba ON Semxcanduclar ar \ls suhsxdmnes m xne mnuea sxaxes andJm mhev cmmmes ON Semxcunduclar vesewes me th| to make changes wuhum mnhev mouse to any pruduns havem ON Semanduc‘m makes m7 wanamy represenlalmn m guarantee regardmg me sumahmy at W; manuals can any pamcu‘av purpase nnv eaes ON Semumnduclm assume any Mammy ansmg mac xne apphcahan m use ac any pmdudnv emu and saeancauy dwsc‘axms any and au Mammy mcmdmg wmnam nmnanan spema‘ cansequenha‘ m \nmdenla‘ damages ON Semxmnduclar dues nn| aanyey any neense under Ms pa|em thls nar xne ngms av n|her5
SC−59 / CP3
CASE 318BJ
ISSUE O
DATE 09 JAN 2015
SCALE 2:1
XXX MG
G
XXX = Specific Device Code
M = Date Code
G= Pb−Free Package
GENERIC
MARKING DIAGRAM
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present.
1
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
(Note: Microdot may be in either location)
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSIONS D AND E1 DO NOT INCLUDE MOLD FLASH, PRO-
TRUSIONS, OR GATE BURRS. MOLD FLASH, PROTRUSIONS,
OR GATE BURRS SHALL NOT EXCEED 0.20 PER SIDE.
4. DIMENSIONS D AND E1 ARE MEASURED AT THE OUTERMOST
EXTREME OF THE PLASTIC BODY.
5. DIMENSIONS b AND c APPLY TO THE FLAT SECTION OF THE
LEAD BETWEEN 0.10 AND 0.20 FROM THE TIP.
DIM
A
MIN MAX
0.95
MILLIMETERS
A1
e0.95 BSC
A2 0.20 0.40
1.35
0.00 0.10
b0.35
c
D2.75 3.05
0.50
0.10 0.20
E2.30
E1
L0.35 0.75
2.70
1.35 1.65
b
E
D
2
3
1
A1
A
SEATING
PLANE
C
SIDE VIEW
A
M
0.10 C
TOP VIEW
A
3X
E1
e
L
3X
A2
c
3X
END VIEW
1.00
3X
DIMENSIONS: MILLIMETERS
SOLDERING FOOTPRINT*
0.95
RECOMMENDED
PITCH
3.40
0.80
3X
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
98AON94458F
DOCUMENT NUMBER:
DESCRIPTION:
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
SC−59 / CP3
© Semiconductor Components Industries, LLC, 2019 www.onsemi.com
a a e lrademavks av Semxcunduclm Cnmvnnems In "sine \ghlsmanumhernlpalems \rademavks Dav www menu cumrsuerguwaxem Mavkmg gm 9 www nnserm cum
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative
◊