IML02 Series Datasheet by XP Power

D J XP Power Inpm current No L555 Full Lou s s v 555 mA 55 mA 5ss mA 1555 yr 75% 1175525555175 5 51/ 455 mA so mA 5ss mA 475 yr 75% 5755255555 5 51/ 222 mA so mA 555 mA 475 yr 55% 5755255555 12 51/ 157 mA so mA 452 mA 225 yr 5s% 5755255512 15 5v 1ss mA so mA 455 mA 225 yr 52% 5755255515 2s s v 2sos mA 55 mA 515 771A 2475 yr 77% 5755255555 25 51/ 2255 mA so mA 51s 771A 2225 yr 75% 5755255555 25 51/ 2111 mA so mA 555 mA 2225 yr 55% 1555255555 212 51/ 255 mA so mA 452 mA 2155 yr 5s% 5755255512 215 51/ 257 mA so mA 455 mA 2155 yr 52% 5755255515 s s v 555 mA 25 mA 217 mA 1555 yr 75% 1175521255175 5 51/ 455 mA so mA 255 mA 475 yr 55% 5755212555 5 51/ 222 mA so mA 255 mA 475 yr 55% 5755212555 12 51/ 157 mA so mA 255 mA 225 yr 5s% 5755212512 15 5v 1ss mA so mA 255 mA 225 yr 52% 5755212515 2s s v 2sos mA 25 mA 214 771A 2475 yr 75% 1ML52125os 25 51/ 2255 mA so mA 255 mA 2225 yr 55% 1ML52125o5 25 51/ 2111 mA so mA 255 mA 2225 yr 55% 1ML52125o5 212 51/ 255 mA so mA 255 mA 2155 yr 5s% 5755212512 215 51/ 257 mA so mA 255 mA 2155 yr 52% 5755212515 s s v 555 mA 25 mA 174 mA 1555 yr 75% 1175521555175 5 51/ 455 mA so mA 175 mA 475 yr 75% 5755215555 5 51/ 222 mA so mA 157 771A 475 yr 55% 5755215555 12 51/ 157 mA so mA 157 771A 225 yr 55% 5755215512 15 5v 1ss mA so mA 157 771A 225 yr 55% 5755215515 2s s v 2sos mA 25 mA 175 mA 247o yr 75% 1ML52155os 25 51/ 2255 mA so mA 175 mA 2225 yr 75% 1ML52155o5 25 51/ 2111 mA so mA 157 771A 2225 yr 55% 1ML52155o5 212 51/ 255 mA so mA 157 771A 2155 yr 55% 5755215512 215 51/ 257 mA so mA 157 771A 2155 yr 55% 5755215515 s s v 555 mA 25 mA 111 m 1555 yr 75% 1175522455175 5 51/ 455 mA 25 mA 15s 771A 475 yr 75% 5755224555 5 51/ 222 mA 25 mA 154 771A 475 yr 55% 5755224555 12 51/ 157 mA 25 mA 154 771A 225 yr 55% 5755224512 15 5v 1ss mA 25 mA 154 771A 225 yr 55% 5755224515 2s s v 2sos mA 25 mA 157 771A 2475 yr 77% 5755224555 25 51/ 2255 mA 25 mA 15s 771A 2225 yr 75% 5755224555 25 51/ 2111 mA 25 mA 154 771A 2225 yr 55% 1555224555 212 51/ 255 mA 25 mA 154 771A 2155 yr 55% 5755224512 215 51/ 257 mA 25 mA 154 771A 2155 yr 55% 5755224515
IML02 Series DC-DC Converter
xxx Series
www.xppower.com
1
Models & Ratings
Notes
Input currents measured at nominal input voltage.
• World Wide Medical Approvals
• Single and Dual Outputs
• SIP7 Package
• -40 °C to +85 °C Operation
• Full Load at 85 °C Ambient
• 4000 VAC Isolation, 1 x MOPP
• 2 µA Patient Leakage Current
• MTBF 2.5 MHrs
• 3 Year Warranty
Dimensions:
IML02:
0.77 x 0.39 x 0.49” (19.5 x 9.8 x 12.5 mm)
2 Watts
Input Voltage Output Voltage Output Current Input current Max. capacitive load Efficiency Model Number
No Load Full Load
4.5-5.5 V
3.3 V 600 mA 50 mA 533 mA 1000 µF 75% IML0205S3V3
5.0 V 400 mA 60 mA 533 mA 470 µF 78% IML0205S05
9.0 V 222 mA 60 mA 500 mA 470 µF 80% IML0205S09
12.0 V 167 mA 60 mA 482 mA 220 µF 83% IML0205S12
15.0 V 133 mA 60 mA 488 mA 220 µF 82% IML0205S15
±3.3 V ±303 mA 50 mA 519 mA ±470 µF 77% IML0205D03
±5.0 V ±200 mA 60 mA 513 mA ±220 µF 78% IML0205D05
±9.0 V ±111 mA 60 mA 500 mA ±220 µF 80% IML0205D09
±12.0 V ±83 mA 60 mA 482 mA ±100 µF 83% IML0205D12
±15.0 V ±67 mA 60 mA 488 mA ±100 µF 82% IML0205D15
10.8-13.2 V
3.3 V 600 mA 25 mA 217 mA 1000 µF 76% IML0212S3V3
5.0 V 400 mA 30 mA 208 mA 470 µF 80% IML0212S05
9.0 V 222 mA 30 mA 208 mA 470 µF 80% IML0212S09
12.0 V 167 mA 30 mA 200 mA 220 µF 83% IML0212S12
15.0 V 133 mA 30 mA 203 mA 220 µF 82% IML0212S15
±3.3 V ±303 mA 25 mA 214 mA ±470 µF 78% IML0212D03
±5.0 V ±200 mA 30 mA 208 mA ±220 µF 80% IML0212D05
±9.0 V ±111 mA 30 mA 208 mA ±220 µF 80% IML0212D09
±12.0 V ±83 mA 30 mA 200 mA ±100 µF 83% IML0212D12
±15.0 V ±67 mA 30 mA 203 mA ±100 µF 82% IML0212D15
13.5-16.5V
3.3 V 600 mA 25 mA 174 mA 1000 µF 76% IML0215S3V3
5.0 V 400 mA 30 mA 170 mA 470 µF 78% IML0215S05
9.0 V 222 mA 30 mA 167 mA 470 µF 80% IML0215S09
12.0 V 167 mA 30 mA 167 mA 220 µF 80% IML0215S12
15.0 V 133 mA 30 mA 167 mA 220 µF 80% IML0215S15
±3.3 V ±303 mA 25 mA 170 mA ±470 µF 78% IML0215D03
±5.0 V ±200 mA 30 mA 170 mA ±220 µF 78% IML0215D05
±9.0 V ±111 mA 30 mA 167 mA ±220 µF 80% IML0215D09
±12.0 V ±83 mA 30 mA 167 mA ±100 µF 80% IML0215D12
±15.0 V ±67 mA 30 mA 167 mA ±100 µF 80% IML0215D15
21.6-26.4V
3.3 V 600 mA 20 mA 111 mA 1000 µF 75% IML0224S3V3
5.0 V 400 mA 20 mA 106 mA 470 µF 78% IML0224S05
9.0 V 222 mA 20 mA 104 mA 470 µF 80% IML0224S09
12.0 V 167 mA 20 mA 104 mA 220 µF 80% IML0224S12
15.0 V 133 mA 20 mA 104 mA 220 µF 80% IML0224S15
±3.3 V ±303 mA 20 mA 107 mA ±470 µF 77% IML0224D03
±5.0 V ±200 mA 20 mA 106 mA ±220 µF 78% IML0224D05
±9.0 V ±111 mA 20 mA 104 mA ±220 µF 80% IML0224D09
±12.0 V ±83 mA 20 mA 104 mA ±100 µF 80% IML0224D12
±15.0 V ±67 mA 20 mA 104 mA ±100 µF 80% IML0224D15
5 v node‘s
IML02 Series
www.xppower.com 2
DC-DC Converter
Input
Output
Characteristic Minimum Typical Maximum Units Notes & Conditions
Output Voltage 3.3 30 VDC See Models and Ratings table
Initial Set Accuracy ±5 % At full load
Minimum Load 10 % Minimum load required to meet specified regulation
Line Regulation ±1.2 %/1% Output changes by max of 1.2% for each 1% change in
input voltage
Load Regulation 10 % From 10% to full load, see application note
Cross Regulation ±4 % On dual output models, when one output is at 25% load
and other is varied from 10% load to full load
Ripple & Noise 150 mV pk-pk 20 MHz bandwidth. Measured using 10 µF electrolytic in
parallel with 0.1 µF ceramic capacitor
Short Circuit Protection Continuous
Maximum Capacitive Load See Models and Ratings table
Temperature Coefficient 0.03 %/ ˚C
Characteristic Minimum Typical Maximum Units Notes & Conditions
Input Voltage Range
4.5 5.5
VDC
5 V nominal
10.8 13.2 12 V nominal
13.5 16.5 15 V nominal
21.6 26.4 24 V nominal
Input Reflected Ripple Current 20 mA pk-pk Through 12 µH inductor and 47 µF capacitor
Input Surge
5.5
VDC for 100 ms
5 V models
13.2 12 V models
16.5 15 V nominal
26.4 24 V nominal
General
Characteristic Minimum Typical Maximum Units Notes & Conditions
Efficiency 80 %
Isolation: Input to Output 4000 VAC 1 x MOPP at 250 VAC rms working voltage, 2 x MOPP at
125 VAC working voltage
Patient Leakage Current 2 µA
Isolation Resistance 109Ω
Isolation Capacitance 10 20 pF
Switching Frequency 50 100 kHz
Power Density 13.6 W/in3
Mean Time Between Failure 2.5 MHrs MIL-HDBK-217F, +25 °C GB
Weight 0.009 (4.2) lb (g)
Environmental
Characteristic Minimum Typical Maximum Units Notes & Conditions
Operating Temperature -40 +85 °C No derating
Storage Temperature -40 +125 °C
Case Temperature +105 °C
Humidity 2.5 95 %RH Non-condensing
Cooling Natural convection
Altitude 5000 m
XP Power l'l L4 11- + In + m rVin rVin No Pin Common + +
3
IML02 Series
www.xppower.com
DC-DC Converter
3
Mechanical Details
EMC: Immunity
Phenomenon Standard Test Level Criteria Notes & Conditions
ESD Immunity EN61000-4-2 ±15 kV A Air Discharge
Radiated Immunity EN61000-4-3 10 Vrms A
EFT/Burst EN61000-4-4 2 kV A External components required,
see application notes
Surge EN61000-4-5 2 kV A External components required,
see applications note
Conducted Immunity EN61000-4-6 10 V rms A
Magnetic Fields EN61000-4-8 30 A/m A
0.39 (9.8)
0.02
(0.5)
0.01
(0.25)
0.39
(9.8)
0.09
(2.4)
0.08
(2.13)
0.02
(0.5)
0.49
(12.5)
Printed
Face
1 2 5 76
0.77 (19.5)
0.60 (15.24)
0.12
(3.0)
0.02
(0.5)
0.47
(12.0)
0.10
(2.54)
1. All dimensions are in inches (mm)
2. Weight: 0.009 lbs (4.2 g) approx.
3. Pin diameter: 0.02±0.002 (0.5±0.05)
4. Pin pitch tolerance: ±0.014 (±0.35)
5. Case tolerance: ±0.02 (±0.5)
Notes
Pin Connections
Pin Single Dual
1 +Vin +Vin
2 -Vin -Vin
5 -Vout -Vout
6 No Pin Common
7 +Vout +Vout
Safety Approvals
Safety Agency Safety Standard Notes & Conditions
UL ANSI/AMMI ES60601-1
CSA CSA C22.2 No. 60601-1
TUV EN60601-1
CB IEC60601-1
EMC: Emissions
Phenomenon Standard Test Level Notes & Conditions
Conducted EN55011 Class B See Application Note
Radiated EN55011 Class B
M 1 XP Power 15 125 10 75 25 Voltage accumcy(%) 10% 20% 30% 40% 50% 60% 70% saw. 90% 1mm Load (%) 'V“ — Mn Load S D1 er rVuul +Vout | WM" — 7 Load -Vm -Voul
IML02 Series
www.xppower.com
DC-DC Converter
27 Nov 18
Input components (C1, C2, D1) are used to help meet EFT and surge test requirements for the module.
Application Note
C1 C2 D1
IML0205XXXX 1000 µF/35 V 330 µF/50 V SMDJ9.0A
IML0212XXXX 1000 µF/35 V 330 µF/50 V SMDJ13A
IML0215XXXX 1000 µF/35 V 330 µF/50 V SMDJ18A
IML0224XXXX 1000 µF/35 V 330 µF/50 V SMDJ28A
High limit
T
ypical Load Line
Low Limit
IML02
Regulation
EFT and Surge Filter
Input filter components (C1,C2 and L) are used to help meet conducted emissions requirements for the module. These components should be
mounted as close as possible to the module, and all leads should be minimised to decrease radiated noise.
C1 C2 L
IML0205XXXX 1206, 4.7 µF/ 50 V 6.8 µH
IML0212XXXX 1206, 4.7 µF/ 50 V 1206, 4.7 µF/ 50 V 6.8 µH
IML0215XXXX 1206, 4.7 µF/ 50 V 1206, 4.7 µF/ 50 V 6.8 µH
IML0224XXXX 1206, 4.7 µF/ 50 V 1206, 4.7 µF/ 50 V 6.8 µH
IML02
EMI Filter