Panasonic
Surface Mount Type ”a
ZA series V type .1
EEC}
High temperature lead-free reflow
0.36::
out
W
f‘fi'fi
Features
0 Endurance : 10000 h at 105 “C
Low ESR and hlgh ripple current (70 % over, Lower ESR than current V-FP)
o ngh voltage (to 80 V.DC)
0 Equivalent to conductive polymer type aluminum electrolytic capacitor
(There are little characteristics change by temperature and frequency)
Vibration-proof product is available upon request. New lineup of (96.3 product. (tp6.3, (1)8, (p10)
0 AEC-QZOO compliant
o RoHS compliant
size code C l D l D8 l F l G
Category temp. range —55 ”C to +105 ”C
Rated voltage range 25 V.DC to 50 v.DC 25 v.DC to 53 v.DC 25 v.DC to 80 v.DC
Nominal cap.range 10 or to 33 “F 10 uF to 56 or i 22 “F to 100 or 22 or to 220 uF l 33 or to 330 “F
Capacitance tolerance :20 % (120 HZ/ +20 )
DC leakage current 1 s 0.01 CV or 3 (0A) Alter 2 minutes (whichever is greater)
Dissipation factor (tan 0) Please see the attached characteristics list
+105 “C i 2 “C, 10000 h, apply the rated ripple current Without exCeedlng the rated voltage.
Capacitance change within s30% of the initial value
Dissipation factor (tan d) s 200 % of the initial limit
ESR s 200 % of the initial limit
DC leakage current within the initial limit
Size code
C D DB F G
2.0 1.4 0.3 0.4 0.3
After storage for 1000 hours at +105 ”C 2 ”C With no voltage applied and then eing
stabilized at +20 °C, capacitors shall meet the limits speclfied in endurance.
(Wlth voltage treatment)
+85 “C i 2 “C, 85 0/0 to 90 0/0, 2000 n, rated voltage applied
Capacitance change within s30% of the initial value
Dissipation factor (tan d) s 200 % of the initial limit
ESR s 200 % of the initial limit
DC leakage current within the initial limit
After reflow soldering and then belng stablllzed at +20 °C, capacitors shall meet the
followmg limits.
Capacitance change Within i10% of the initial value
Dissipation factor (tan 0) Within the initial limit
DC leakage Current Wlthln the lnltlal llmlt
m Dimensions (not to scale)
Example : 25 v.DC 33 pF [Standard]
Marklng Color: BLACK
Capacltance (uF) [Ll—H41 l»
[Vibration-proof product]
< slze="" code:="" d,="" d8=""> < size="" code="" f,="" g="">
i“ *
k, vol code uiiit vpc
25
um mm
Design and specintatiohs are each supiect to change Without notice. Ask factorv for the current technical specintatiohs oefore purchase and/or use
should a safetv concern arise regarding this product, please he sure to contact us immediately JDrJunrlg
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
● Endurance : 10000 h at 105 ℃
● Low ESR and high ripple current (70 % over, Lower ESR than current V-FP)
● High voltage (to 80 V.DC)
● Equivalent to conductive polymer type aluminum electrolytic capacitor
(There are little characteristics change by temperature and frequency)
● Vibration-proof product is available upon request. New lineup of φ6.3 product. (φ6.3, φ8, φ10)
Marking color : BLACK Unit:mm
[Vibration-proof product]
< Size code:D, D8 > < Size code:F, G >
· The dimensions of the vibration-proof products, please refer to the page of the mounting specification.
2.2 0.65±0.1 1.5 0.35
C5.0
D8 6.3 7.7±0.3 6.6 7.8 2.6 0.65±0.1 1.8 0.35
D6.3
φD LA、B
5.8±0.3 5.3 6.5
Dissipation factor (tan δ)
Dissipation factor (tan δ)
K
IW P
Dimensions (not to scale)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
stabilized at +20 ℃, capacitors shall meet the limits specified in endurance.
I ≦ 0.01 CV or 3 (μA) After 2 minutes (whichever is greater)
Please see the attached characteristics list
After storage for 1000 hours at +105 ℃ ± 2 ℃ with no voltage applied and then being
Within ±30% of the initial value
≦ 200 % of the initial limit
≦ 200 % of the initial limit
Within ±30% of the initial value
≦ 200 % of the initial limit
Shelf life
Damp heat (Load)
High temperature lead-free reflow
Dissipation factor (tan δ)
Within ±10% of the initial value
Dissipation factor (tan δ)
Endurance
+105 ℃ ± 2 ℃, 10000 h, apply the rated ripple current without exceeding the rated voltage.
ESR after endurance
(Ω / 100 kHz)(-40 ℃)
≦ 200 % of the initial limit
+85 ℃ ± 2 ℃, 85 % to 90 %, 2000 h, rated voltage applied
Resistance to
soldering heat
After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the
5.8±0.3 6.6 7.8 2.6 0.65±0.1 1.8 0.35
F8.0 10.2±0.3 8.3 10 3.4 0.90±0.2 3.1 0.70±0.2
G10.0 10.2±0.3 10.3 12.0 3.5 0.90±0.2 4.6 0.70±0.2
P K R S T
1.1±0.2 3.3 1.05±0.2
φD LA、B
FIW
Size code
3.3 1.05±0.2
6.3 8.0±0.3 6.6 7.8 0 to +0.15 2.4 0.65±0.1
G
D8
10.0 10.5±0.3
0.65±0.1 2.2 0.35
D
6.3 6.1±0.3 6.6 7.8 0 to +0.15 2.4
2.2 0.35
1.1±0.2
1.3±0.2
0 to +0.15
10.3 12.0 0 to +0.15 3.5 1.2±0.2 4.6 0.70±0.2 0.70±0.2 6.9
Negative polarity marking (–)
Series identification
Rated voltage code
Lot number
Supportive terminals ( ) Reference size
B±0.2
A±0.2
K
(I)
(I) (P)
W
(S)
R
T
φD±0.5
H
F
L
Supportive terminals ( ) Reference size
Pressure relief (φ10 ≦)
F
L
K
W
(I)
(P)
(I)
T
R
(S)
B±0.2
φD±0.5
Pressure relief (φ10 ≦) ( ) Reference size
φD±0.5
K
(I)
(P)
(I)