CG2430X1 Datasheet by CEL

Datasheet Feedback/Errors

H CG2430X1 ‘

This document is subject to change without notice.

Date Published: September 2017

CDS-0010-06 (Issue F)

DESCRIPTION

 The CG2430X1 is a pHEMT GaAs SP3T (Single

Pole Three Throw) switch. This device can operate

from 0.1GHz to 6.0GHz, having low insertion loss

and high isolation.

FEATURES

 Control voltage :

VC(H) = 1.8 to 5.0 V (3.0V TYP.)

VC(L) = -0.2 to 0.2 V (0V TYP.)

 Low Insertion Loss :

Lins = 0.50 dB TYP. @ f = 2.0 to 2.5 GHz

Lins = 0.60 dB TYP. @ f = 4.9 to 6.0 GHz

 High Isolation :

ISL = 28 dB TYP. @ f = 2.0 to 2.5 GHz

ISL = 25 dB TYP. @ f = 4.9 to 6.0 GHz

 Power handling :

Pin(1dB) = +31.0 dBm TYP.

@ VC(H) = 3.0 V, VC(L) = 0 V

ORDERING INFORMATION

PACKAGE

 8-pin Thin SON (X1) Package

(1.5mm x 1.5mm x 0.37mm)

APPLICATIONS

 Wireless LAN (IEEE 802.11 a/b/g/n/ac)

Part Number

Order Number

Package

Marking

Description

CG2430X1

CG2430X1-C2

8-pin plastic

TSON

(Pb-Free)

C01

• Embossed tape 8 mm wide

• Pin 1, 8 face the perforation

side of the tape

• MOQ 10 kpcs/reel

CG2430X1-EVAL

• Evaluation Board with DC

block capacitors, power

supply bypass capacitors,

and RF and DC connectors

• MOQ 1

RF SWITCH

CG2430X1

Enter a Short Document/Title Name Here

0.1 to 6.0GHz SP3T Switch

(Top View) (Top View) (Bottom View) Pin No. Pin Name RFC CND VC1 IO) 8 7 6 RF1 RFZ VCZ l—ll—IHFJ LILIDD VCS mummwa RF3 Remark Exposed pad : GND

CG2430X1

This document is subject to change without notice.

PIN CONFIGURATION AND

INTERNAL BLOCK DIAGRAM

TRUTH TABLE

VC1

VC2

VC3

RFC-RF1

RFC-RF2

RFC-RF3

High

Low

OFF

Low

High

Low

OFF

Low

High

OFF

ABSOLUTE MAXIMUM RATINGS

(TA = +25˚C, unless otherwise specified)

Parameter

Symbol

Rating

Unit

Control Voltage

6.0Note 1

Input Power

+32.0Note 2

dBm

Operating Ambient Temperature

-45～+85

˚C

Storage Temperature

Tstg

-55～+150

˚C

Note 1. |VC1 - VC2|≦6.0V

2. 3.0V≦|VC1 - VC2|≦5.0V

RECOMMENDED OPERATING RANGE

(TA = +25˚C, unless otherwise specified)

Parameter

Symbol

MIN.

TYP.

MAX.

Unit

Operating Frequency

0.1

6.0

GHz

Switch Control Voltage (H)

VC(H)

+1.8

+3.0

+5.0

Switch Control Voltage (L)

VC(L)

-0.2

+0.2

CG2430X1

This document is subject to change without notice.

ELECTRICAL CHARACTERISTICS 1

(TA=+25˚C, VC(H)=3.0V, VC(L)=0V, Zo=50Ω, DC Block Capacitance=8pF, unless otherwise specified)

Parameter

Symbol

Path

Condition

MIN.

TYP.

MAX.

Unit

Insertion Loss

LINS

RFC to

RF1, 2,

(ON)

f=0.1GHz to 1.0GHz Note 1

f=1.0GHz to 2.0GHz Note 1

f=2.0GHz to 2.5GHz

f=2.5GHz to 4.9GHz

f=4.9GHz to 6.0GHz

0.40

0.50

0.55

0.60

0.55

0.65

0.70

0.80

Isolation

ISL

RFC to

RF1, 2,

(OFF)

f=0.1GHz to 1.0GHz Note 1

f=1.0GHz to 2.0GHz Note 1

f=2.0GHz to 2.5GHz

f=2.5GHz to 4.9GHz

f=4.9GHz to 6.0GHz

Return Loss

RFC to

RF1, 2,

(ON)

f=0.1GHz to 1.0GHz Note 1

f=1.0GHz to 2.0GHz Note 1

f=2.0GHz to 2.5GHz

f=2.5GHz to 4.9GHz

f=4.9GHz to 6.0GHz

0.1dB Loss

Compression Input

Power

Note 2

Pin(-0.1dB)

RFC to

RF1, 2,

f=2.5GHz

+25.0

+28.0

dBm

f=6.0GHz

+25.0

+28.0

dBm

1dB Loss Compression

Input Power

Note 3

Pin(-1dB)

RFC to

RF1, 2,

f=2.5GHz

+28.0

+31.0

dBm

f=6.0GHz

+28.0

+31.0

dBm

3rd Order Input Intercept

Point

IIP3

f=2.5GHz, 2-tone

5MHz Spacing

+55

dBm

2nd Harmonics

2f0

f=2.5GHz, Pin=+22dBm

dBc

3rd Harmonics

3f0

f=2.5GHz, Pin=+22dBm

dBc

Error Vector Magnitude

EVM

802.11a, 64QAM, 54Mbps,

Pin≦+24dBm

2.5

802.11g, 64QAM, 54Mbps,

Pin≦+25dBm

2.5

Switching Speed

tSW

f=1.0GHz

Switch Control Current

ICONT

RF none

Note 1. DC block capacitance = 330pF at f=0.1 to 2.0GHz

Note 2. Pin(0.1dB) is the measured input power level when the insertion loss increases 0.1dB more than that of

the linear range.

Note 3. Pin(1dB) is the measured input power level when the insertion loss increases 1dB more than that of the

linear range.

CG2430X1

This document is subject to change without notice.

ELECTRICAL CHARACTERISTICS 2

(TA=+25˚C, VC(H)=1.8V, VC(L)=0V, Zo=50Ω, DC Block Capacitance=8pF, unless otherwise specified)

Parameter

Symbol

Path

Condition

MIN.

TYP.

MAX.

Unit

Insertion Loss

LINS

RFC to

RF1, 2,

(ON)

f=0.1GHz to 1.0GHz Note 1

f=1.0GHz to 2.0GHz Note 1

f=2.0GHz to 2.5GHz

f=2.5GHz to 4.9GHz

f=4.9GHz to 6.0GHz

---

0.40

0.50

0.55

0.60

0.55

0.65

0.70

0.80

Isolation

ISL

RFC to

RF1, 2,

(OFF)

f=0.1GHz to 1.0GHz Note 1

f=1.0GHz to 2.0GHz Note 1

f=2.0GHz to 2.5GHz

f=2.5GHz to 4.9GHz

f=4.9GHz to 6.0GHz

---

Return Loss

RFC to

RF1, 2,

(ON)

f=0.1GHz to 1.0GHz Note 1

f=1.0GHz to 2.0GHz Note 1

f=2.0GHz to 2.5GHz

f=2.5GHz to 4.9GHz

f=4.9GHz to 6.0GHz

---

0.1dB Loss

Compression Input

Power

Note 2

Pin(-0.1dB)

RFC to

RF1, 2,

f=2.5GHz

+19.0

+22.0

---

dBm

f=6.0GHz

+18.0

+21.0

---

dBm

1dB Loss Compression

Input Power

Note 3

Pin(-1dB)

RFC to

RF1, 2,

f=2.5GHz

+22.0

+25.0

---

dBm

f=6.0GHz

+21.0

+24.0

---

dBm

3rd Order Input Intercept

Point

IIP3

f=2.5GHz, 2-tone

5MHz Spacing

---

+47

---

dBm

2nd Harmonics

2f0

f=2.5GHz, Pin=+22dBm

---

dBc

3rd Harmonics

3f0

f=2.5GHz, Pin=+22dBm

---

dBc

Switching Speed

tSW

f=1.0GHz

---

150

---

Switch Control Current

ICONT

RF none

---

Note 1. DC block capacitance = 330pF at f=0.1 to 2.0GHz

Note 2. Pin(0.1dB) is the measured input power level when the insertion loss increases 0.1dB more than that of

the linear range.

Note 3. Pin(1dB) is the measured input power level when the insertion loss increases 1dB more than that of the

linear range.

.IO “m3 {0:302 45 $3 33 3:52 ~40 -50 Frequency (GHZ) Frequency (GHZ) — — 2 456m 5 BSGHz as #3 83%;. 20 a3 30.. 52mm M, 750 3D 25 20 ‘5 Pm (dBm) Frequency (GHZ)

CG2430X1

This document is subject to change without notice.

TYPICAL CHARACTERISTICS

(VC(H)=3V, VC(L)=0V, TA = +25˚C, DC Block Capacitance=8pF, through board loss is subtracted in insertion loss data)

Typical Insertion Loss vs. Frequency

Typical Isolation vs. Frequency

Typical Return Loss vs. Frequency

Typical Insertion Loss vs.

Input Power

C1 C1 RFco—l |— —| |—ORF3 N_E___1_ O 8 I'OEEF I 0 e 2 : $— 0—7—Lovc3 I I. ______ VClOT—O W—TOVCZ 2H 3 6 H? 1,000pF 4 O O 5 1,000pF RF10—I I— —| |—ORF2 C1 C1 (Top View) (Bottom View) (Side View) a 041 u: /—| o g \-‘ § 3 c5 3 3 U E 3 H’ :l * :1 i :1 , :1 1510.1 3 bl e 0.310.07 o.2to,1 0.3713 2

CG2430X1

This document is subject to change without notice.

EVALUATION CIRCUIT

Note: It is recommended to connect the pin directly to ground, or leave unconnected.

Remarks C1： 0.1 to 2.0 GHz 330pF

： 2.0 to 6.0 GHz 8pF

The application circuits and their parameters are for reference only and are not intended for use in actual designs. DC

Blocking Capacitors are required at all RF ports.

PACKAGE DIMENSIONS

8-pin Plastic TSON (Unit: mm)

Part Summary gage

CG2430X1

This document is subject to change without notice.

RECOMMENDED SOLDERING CONDITIONS

Recommended Soldering Conditions are available on CEL's Part Summary page under Associated Documents

CG2430X1

This document is subject to change without notice.

REVISION HISTORY

Version

Change to current version

Page(s)

CDS-0010-03 (Issue A)

February 17, 2016

Initial datasheet

N/A

CDS-0010-03 (Issue B)

March 23, 2016

Added Eval Board ordering information.

Updated Marking information.

1,2

CDS-0010-04 (Issue C)

April 20, 2016

Revised package dimensions

(Added tolerance spec and Pin thickness)

CDS-0010-04 (Issue D)

August 11, 2016

Removed “Preliminary”

All

CDS-0010-04 (Issue E)

January 11, 2017

Added “Recommended Soldering Conditions” section

CDS-0010-06 (Issue F)

September 13, 2017

Updated Applications section

Added Error Vector Magnitude to Electrical Characteristics table 1

Added “Typical Characteristics” graphs section

1, 3, 5

CG2430X1

This document is subject to change without notice.

[CAUTION]

・ All information included in this document is current as of the date this document is issued. Such information,

however, is subject to change without any prior notice.

・ You should not alter, modify, copy, or otherwise misappropriate any CEL product, whether in whole or in part.

・ CEL does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of

third parties by or arising from the use of CEL products or technical information described in this document. No

license, expressed, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual

property rights of CEL or others.

・ Descriptions of circuits, software and other related information in this document are provided only to illustrate the

operation of semiconductor products and application examples. You are fully responsible for the incorporation of

these circuits, software, and information in the design of your equipment. CEL assumes no responsibility for any

losses incurred by you or third parties arising from the use of these circuits, software, or information.

・ CEL has used reasonable care in preparing the information included in this document, but CEL does not warrant

that such information is error free. CEL assumes no liability whatsoever for any damages incurred by you resulting

from errors in or omissions from the information included herein.

・ Although CEL endeavors to improve the quality and reliability of its products, semiconductor products have specific

characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions.

Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or

damage caused by fire in the event of the failure of a CEL product, such as safety design for hardware and software

including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging

degradation or any other appropriate measures

Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final

products or system manufactured by you.

・ Please use CEL products in compliance with all applicable laws and regulations that regulate the inclusion or use of

controlled substances, including without limitation, the EU RoHS Directive.

CEL assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and

regulations.

・ This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent

of CEL.

・ Please contact CEL if you have any questions regarding the information contained in this document or CEL

products, or if you have any other inquiries.

www.cel.com/conlacms

CG2430X1

This document is subject to change without notice.

[CAUTION]

This product uses gallium arsenide (GaAs) of the toxic substance appointed in laws and ordinances.

GaAs vapor and powder are hazardous to human health if inhaled or ingested.

・ Do not dispose in fire or break up this product.

・ Do not chemically make gas or powder with this product.

・ When discarding this product, please obey the laws of your country.

・ Do not lick the product or in any way allow it to enter the mouth.

[CAUTION]

Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can

damage this device. This device must be protected at all times from ESD. Static charges may easily

produce potentials of several kilovolts on the human body or equipment, which can discharge

without detection. Industry-standard ESD precautions should be used at all times.

CEL Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054 • Tel: (408) 919-2500 • www.cel.com

For a complete list of sales offices, representatives and distributors,

Please visit our website: www.cel.com/contactus

For inquiries email us at rfw@cel.com

CG2430X1 Datasheet by CEL

INFORMATION

HELP

CONTACT US

FOLLOW US