Fixed Resistors Product Catalog Datasheet by Panasonic Electronic Components

View All Related Products | Download PDF Datasheet
CATALOG
Fixed Resistors
2019
2019.6 industrial.panasonic.com/
Panasonic
– 1 –
Fixed Resistors (Surface Mount Resistors) CONTENTS
All products in this catalog comply with the RoHS Directive.
The RoHS Directive is “the Directive (2011/65/EU) on the Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic Equipment “ and its revisions.
Classifi cation Product Item Part No. Page
Safety Precautions (Common precautions for Fixed Resistors) 2
Safety Precautions (Common precautions for Surface Mount Resistors) 3
Chip
Resistors
Thick Film Chip Resistors ERJ XG, 1G, 2G, 3G, 6G, 8G, 14, 12, 12Z, 1T 4
Precision Thick Film Chip Resistors ERJ XG, 1G, 1R, 2R, 3R, 6R, 3E, 6E, 8E, 14, 12, 1T 7
High
Precision
Metal Film (Thin Film) Chip Resistors,
High Reliability Type ERA 1A, 2A, 3A, 6A, 8A 11
High Precision
Thick Film Chip Resistors ERJ PB3, PB6 14
Current Sensing
Thick Film Chip Resistors
/ Low Resistance Type
ERJ 2LW, 3LW, 6LW, 2BW,3BW,6BW,8BW,6CW,8CW
ERJ 2B, 3B, 6D, 6B, 8B, 14B, 3R, 6R, 8R, 14R, 12R,12Z,
ERJ 1TR, L03, L06, L08, L14, L12, L1D, L1W
16
Current Sensing Resistors, Metal Plate Type
ERJ MS4S, MS4H, MB1S 21
High Power Chip Resistors / Wide Terminal Type
ERJ A1, B1, B2, B3 25
Low TCR High Power Chip Resistors /
Wide Terminal Type ERJ D1, D2 29
Small&High
Power
Anti-Surge Thick Film Chip Resistors ERJ PA2, P03, PA3, P06, P08, P14 31
Anti-Pulse Thick Film Chip Resistors ERJ T06, T08, T14 34
Anti-Sulfurated
Anti-Sulfurated Thick Film
Chip Resistors
ERJ S02, S03, S06, S08, S14, S12, S1D, S1T
ERJ U01, U02, U03, U06, U08, U14, U12, U1D, U1T
ERJ U6S, U6Q
37
Anti-Sulfurated Thick Film Chip Resistors /
Anti-Surge Type ERJ UP6, UP8 40
Anti-Sulfurated High Power Chip Resistors /
Wide Terminal Type
ERJ C1 43
Resistor
Network/Array
Chip Resistor Array EXB 14V, 18V, 24V, 28V, N8V, 2HV, 34V,
V4V, 38V, V8V, S8V 45
Anti-Sulfurated Chip Resistor Array EXB U14, U18, U24, U28, U2H, U34, U38 49
Chip Resistor Networks EXB D, E, A, Q 52
Chip Attenuator EXB 14AT, 24AT 55
Common
specifi cations
Packaging Methods (Taping) 57
Recommended Land Pattern 62
Recommended Soldering Conditions 64
Standard for Resistance Value and Resistance Tolerance 65
Apr. 201907
Panasonic A
– 2 –
Safety Precautions (Common precautions for Fixed Resistors)
When using our products, no matter what sort of equipment they might be used for, be sure to make a written
agreement on the specifications with us in advance. The design and specifications in this catalog are subject
to change without prior notice.
Do not use the products beyond the specifications described in this catalog.
This catalog explains the quality and performance of the products as individual components. Before use, check
and evaluate their operations when installed in your products.
Install the following systems for a failsafe design to ensure safety if these products are to be used in equip ment
where a defect in these products may cause the loss of human life or other significant dam age, such as damage to
vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating
appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment.
Systems equipped with a protection circuit and a protection device
Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a sin gle fault
(1) Precautions for use
These products are designed and manufactured for general and standard use in general elec tron ic equipment
(e.g. AV equipment, home electric appliances, office equipment, information and communication equipment)
These products are not intended for use in the following special conditions. Before using the products,
carefully check the effects on their quality and performance, and determine whether or not they can be used.
1. In liquid, such as water, oil, chemicals, or organic solvent
2. In direct sunlight, outdoors, or in dust
3. In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
4. Electric Static Discharge (ESD) Environment
These components are sensitive to static electricity and can be damaged under static shock (ESD).
Please take measures to avoid any of these environments.
Smaller components are more sensitive to ESD environment.
5. Electromagnetic Environment
Avoid any environment where strong electromagnetic waves exist.
6. In an environment where these products cause dew condensation
7. Sealing or coating of these products or a printed circuit board on which these products are mounted, with
resin or other materials
These products generate Joule heat when energized. Carefully position these products so that their heat will
not affect the other components.
• Carefully position these products so that their temperatures will not exceed the category temperature range due
to the effects of neighboring heat-generating components. Do not mount or place heat-generating components
or inflammables, such as vinyl-coated wires, near these products.
Note that non-cleaning solder, halogen-based highly active flux, or water-soluble flux may deteriorate the
performance or reliability of the products.
• Carefully select a flux cleaning agent for use after soldering. An unsuitable agent may deteriorate the performance
or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave water
residues. Otherwise, the insulation performance may be deteriorated.
(2) Precautions for storage
The performance of these products, including the solderability, is guaranteed for a year from the date of ar riv al
at your company, provided that they remain packed as they were when delivered and stored at a tem per a ture
of 5 °C to 35 °C and a relative humidity of 45 % to 85 %.
Even within the above guarantee periods, do not store these products in the following conditions. Otherwise,
their electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping
materials) may be deformed or deteriorated, resulting in mounting failures.
1. In salty air or in air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
2. In direct sunlight
<Package markings>
Package markings include the product number, quantity, and country of origin.
In principle, the country of origin should be indicated in English.
Sep. 201401
Panasonic A
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Surface Mount Resistors Safety precautions
– 3 –
Safety Precautions (Common precautions for Surface Mount Resistors)
The following are precautions for individual products. Please also refer to the common precautions for Fixed Resistors
in this catalog.
1. Take measures against mechanical stress during and after mounting of Surface Mount Resistors (hereafter called the
resistors) so as not to damage their electrodes and protective coatings.
Be careful not to misplace the resistors on the land patterns. Otherwise, solder bridging may occur.
2. Keep the rated power and ambient temperature within the specified derating curve.
Some circuit boards, wiring patterns, temperatures of heat generated by adjacent components, or am bi ent
tem per a tures can become factors in the rise of the temperature of the re sis tors, regardless of the level of power
applied. Therefore, check the conditions before use and op ti mize them so as not to damage the boards and peripheral
components.
Make sure to contact us before using the resistors under special conditions.
3. If a transient load (heavy load in a short time) like a pulse is expected to be applied, check and evaluate the
operations of the resistors when installed in your products before use.
Never exceed the rated power. Otherwise, the performance and/or reliability of the resistors may be impaired.
4. Before using halogen-based or other high-activity flux, check the possible effects of the flux residues on the
per for mance and reliability of the resistors.
5. When soldering with a soldering iron, never touch the resistors'bodies with the tip of the soldering iron. When using a
soldering iron with a high temperature tip, finish soldering as quickly as possible (within three seconds at 350 °C max.).
6. As the amount of applied solder becomes larger, the mechanical stress applied to the resistors increases, causing
problems such as cracks and faulty characteristics. Avoid applying an excessive amounts of solder.
7. When the resistors' protective coatings are chipped, flawed, or removed, the characteristics of the resistors may be
impaired. Take special care not to apply mechanical shock during automatic mounting or cause damage during
handling of the boards with the resistors mounted.
8. Do not apply shock to the resistors or pinch them with a hard tool (e.g. pliers and tweezers). Otherwise, the resistors'
protective coatings and bodies may be chipped, affecting their performance.
9. Avoid excessive bending of printed circuit boards in order to protect the resistors from abnormal stress.
10. Do not immerse the resistors in solvent for a long time. Before using solvent, carefully check the effects of im mer sion.
11. Transient voltage
If there is a possibility that the transient phe nom e non (significantly high voltage ap plied in a short time) may
oc cur or that a high voltage pulse may be applied, make sure to evaluate and check the char ac ter is tics of
Fixed Metal (Oxide) Film Resistors mounted on your product rather than only depending on the calculated
pow er limit or steady-state conditions to complete the de sign or decide to use the resistors.
12. Do not apply excessive tension to the terminals.
Sep. 201402
Panasonic DDDDDDDDDDDD ’:'7 T:
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Thick Film Chip Resistors
– 4 –
E
1
R
2
J
3
3
4
G
5
E
6
Y
7
J
8
1
9
0
10
2
11
V
12
Thick Film
Chip Resistors
Product Code Size, Power Rating
01005
0201
0402
0603
0805
1206
1210
1812
2010
2512
XGN
1GN
2GE
3GE
6GE
8GE
14
12
12Z
1T
0.031 W
0.05 W
0.1 W
0.1 W
0.125 W
0.25 W
0.5 W
0.75 W
0.75 W
1 W
Power R.
Marking
Code
Y
Nil
Marking
Value Marking on
black side
No marking
Resistance Tolerance
Code
J
0
Tolerance
±5 %
Jumper
The first two digits are significant figures of resistance and
the third one denotes number of zeros following.
Decimal Point is expressed by R as 4.7 = 4R7.
Jumper is expressed by R00.
Resistance Value
Packaging Methods
Code
Y
U
Packaging Part No.
Embossed Carrier Taping
W4P1, 40,000 pcs.
Pressed Carrier Taping
W8P2, 20,000 pcs.
CPressed Carrier Taping
2 mm pitch, 15,000 pcs.
ERJXGN
X
YPunched Carrier Taping
2 mm pitch, 20,000 pcs.
U
Embossed Carrier Taping
4 mm pitch, 5,000 pcs.
Punched Carrier Taping
2 mm pitch, 10,000 pcs. ERJ2GE
ERJ1GN
Embossed Carrier Taping
4 mm pitch, 4,000 pcs. ERJ1T
ERJ14
ERJ12
ERJ12Z
Code
VPunched Carrier Taping
4 mm pitch, 5,000 pcs.
ERJ3GE
ERJ6GE
ERJ8GE
Inch
Thick Film Chip Resistors
Type: ERJ XG, 1G, 2G, 3G, 6G,
8G, 14, 12, 12Z, 1T
Explanation of Part Numbers
Features
Small size and lightweight
High reliability
Metal glaze thick fi lm resistive element and three layers of electrodes
Compatible with placement machines
Taping packaging available
Suitable for both refl ow and fl ow sol der ing
Reference Standards
IEC 60115-8, JIS C 5201-8, JEITA RC-2134C
AEC-Q200 qualifi ed (Exemption ERJXG)
RoHS compliant
Series XGN, 1GN and 2GE do not have value markings on the black side.
Please omit the letter "Y" from the part number for these series of parts.
The other part number factors will move up respectively.
As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
ERJXGN, 1GN, 2GE, 3GE, 6GE, 8GE, 14, 12, 12Z, 1T Series, ±5 %
Feb. 201908
Panasonic f
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Thick Film Chip Resistors
– 5 –
Protective coating
Alumina substrate Electrode (Inner)
Electrode
(Between)
Thick film
resistive element Electrode (Outer)
–40 –20 0 20 40 60 80 100 120 140 160
0
180–60
155
°
C
70 °C
Ambient Temperature (°C)
20
40
60
80
100
Rated Load (%)
–55 °C
2G, 3G, 6G, 8G,
14, 12, 12Z, 1T
XG, 1G
125 °C
a
b
t
W
L
Ratings
Part No. Dimensions (mm)
Mass (Weight)
(g/1000 pcs.)
LWa b t
ERJXG 0.40±0.02 0.20±0.02 0.10±0.03 0.10±0.03 0.13±0.02 0.04
ERJ1G 0.60±0.03 0.30±0.03 0.10±0.05 0.15±0.05 0.23±0.03 0.15
ERJ2G 1.00±0.05 0.50±0.05 0.20±0.10 0.25±0.05 0.35±0.05 0.8
ERJ3G 1.60±0.15 0.80+0.15 0.30±0.20 0.30±0.15 0.45±0.10 2
ERJ6G 2.00±0.20 1.25±0.10 0.40±0.20 0.40±0.20 0.60±0.10 4
ERJ8G 3.20+0.05 1.60+0.05 0.50±0.20 0.50±0.20 0.60±0.10 10
ERJ14 3.20±0.20 2.50±0.20 0.50±0.20 0.50±0.20 0.60±0.10 16
ERJ12 4.50±0.20 3.20±0.20 0.50±0.20 0.50±0.20 0.60±0.10 27
ERJ12Z 5.00±0.20 2.50±0.20 0.60±0.20 0.60±0.20 0.60±0.10 27
ERJ1T 6.40±0.20 3.20±0.20 0.65±0.20 0.60±0.20 0.60±0.10 45
–0.05
–0.15
–0.20
Part No.
(inch size)
Power Rating
(3)
at 70 °C
(W)
Limiting Element
Voltage
(1)
(V)
Maximum Overload
Voltage
(2)
(V)
Resistance
Tolerance
(%)
Resistance
Range
(Ω)
T.C.R.
(×10–6/°C)
Category
Temperature Range
(°C)
AEC-Q200
Grade
ERJXG
(01005) 0.031 15 30 ±5 1 to 1 M (E24)
<10 Ω : –100 to +600
10 Ω to 100 Ω : ±300
100 Ω ≤ : ±200
–55 to +125
ERJ1G
(0201) 0.05 25 50 ±5 1 to 10 M (E24)
<10 Ω:
–100 to +600
10 Ω to 1 MΩ:
±200
1 MΩ<:
–400 to +150
–55 to +125 Grade 1
ERJ2G
(0402) 0.1 50 100 ±5 1 to 10 M (E24) –55 to +155 Grade 0
ERJ3G
(0603) 0.1 75 150 ±5 1 to 10 M (E24) –55 to +155 Grade 0
ERJ6G
(0805) 0.125 150 200 ±5 1 to 10 M (E24) –55 to +155 Grade 0
ERJ8G
(1206) 0.25 200 400 ±5 1 to 10 M (E24) –55 to +155 Grade 0
ERJ14
(1210) 0.5 200 400 ±5 1 to 10 M (E24) –55 to +155 Grade 0
ERJ12
(1812) 0.75 200 500 ±5 1 to 10 M (E24) –55 to +155 Grade 0
ERJ12Z
(2010) 0.75 200 500 ±5 1 to 10 M (E24) –55 to +155 Grade 0
ERJ1T
(2512) 1 200 500 ±5 1 to 1 M (E24) –55 to +155 Grade 0
Part No.
(inch size)
Rated Current
(A)
Maximum Over load Current (1)
(A)
ERJXG (01005) 0.5 1
ERJ1G (0201)
ERJ2G (0402) 12
ERJ3G (0603)
ERJ6G (0805)
24
ERJ8G (1206)
ERJ14 (1210)
ERJ12 (1812)
ERJ12Z (2010)
ERJ1T (2512)
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure below.
[For Resistor]
[For Jumper]
Construction Dimensions in mm (not to scale)
(1)
Rated Continuous Working Voltage (RCWV) shall be de ter mined from RCWV=Power Rating × Re sis tance Values, or Limiting Element Voltage list ed above, whichever less.
(2)
Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) × RCWV or Maximum Overload Voltage listed above, whichever less.
(3) Use it on the condition that the case temperature is below the upper category temperature.
(1) Overload test current
Feb. 201908
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Thick Film Chip Resistors
– 6 –
Test Item Performance Requirements Test Conditions
Resistor type Jumper type
Resistance Within Specifi ed
Tolerance 50 mΩ or less 20 °C
T. C. R. Within Specifi ed
T. C. R. 50 mΩ or less +25 °C/+155 °C (ERJXG, ERJ1G : +25 °C/+125 °C)
Overload ±2 % 50 mΩ or less Rated Voltage × 2.5, 5 s
Jumper type : Max. Overload Current, 5 s
Resistance to Soldering Heat
±1 % 50 mΩ or less 270 °C, 10 s
Rapid Change of
Temperature ±1 % 50 mΩ or less
–55 °C (30min.) / +155 °C (ERJXG, ERJ1G : +125 °C) (30min.),
100 cycles
High Temperature
Exposure ±1 % 50 mΩ or less +155 °C (ERJXG, ERJ1G : +125 °C) , 1000 h
Damp Heat, Steady State ±1 % 50 mΩ or less 60 °C, 90 % to 95 %RH, 1000 h
Load Life in Humidity ±3 % 50 mΩ or less
60 °C, 90 % to 95 %RH, Rated Voltage (Jumper type: Rated Current),
1.5 h ON/0.5 h OFF cycle, 1000 h
Endurance at 70 °C ±3 % 50 mΩ or less 70 °C, Rated Voltage(Jumper type: Rated Current),
1.5 h ON/0.5 h OFF cycle, 1000 h
Perfomance
Feb. 201908
Panasonic DDDDDDI IDES g
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Precision Thick Film Chip Resistors
– 7 –
E
1
R
2
J
3
3
4
R
5
B
6
D
7
1
8
0
9
0
10
V
11
2
12
Product Code
Thick Film
Chip Resistors
Size, Power Rating
Code
1R
2R
3R
6R
Power R.
0.05 W
0.063 W
0.1 W
0.1 W
T.C.R. Marking
T.C.R. Code
H
B
K
E
±50×10–6/˚C (1R, 2R)
±50×10–6/˚C (3R, 6R)
±100×10–6/˚C (2R)
±100×10–6/˚C (3R, 6R)
Resistance Value
Resistance Tolerance
Code
D
Tolerance
±0.5 %
Packaging Methods
Code
C
X
V
Pressed Carrier Taping
2 mm pitch, 15,000 pcs.
Punched Carrier Taping
2 mm pitch, 10,000 pcs.
Punched Carrier Taping
4 mm pitch, 5,000 pcs.
ERJ1R
ERJ2R
ERJ3R
ERJ6R
Packaging Part No.
The first three digits are significant figures of resistance
and the last one denotes number of zeros following.
Example: 100210 kΩ
Inch
0201
0402
0603
0805
Precision Thick Film Chip Resistors
Type: ERJ XG, 1G
ERJ 1R, 2R, 3R, 6R
ERJ 3E, 6E, 8E, 14, 12, 1T
Explanation of Part Numbers
Features
Small size and lightweight
High reliability
Metal glaze thick fi lm resistive element and three layers of electrodes
Compatible with placement machines
Taping packaging available
Suitable for both refl ow and fl ow soldering
Low Resistance Tolerance
ERJXG, 1G, 2R, 3E, 6E, 8E, 14, 12, 1T Series : ±1 %
ERJ1R, 2R, 3R, 6R Series : ±0.5 %
Reference Standards
IEC 60115-8, JIS C 5201-8, JEITA RC-2134C
AEC-Q200 qualifi ed (Exemption ERJXG, ERJ1R)
RoHS compliant
As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
ERJ1R, 2R, 3R, 6R Series, ±0.5 %
Mar. 201910
Panasonic DEED
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Precision Thick Film Chip Resistors
– 8 –
a
b
t
W
L
E
1
R
2
J
3
8
4
E
5
N
6
F
7
1
8
0
9
0
10
2
11
V
12
Product Code
Thick Film
Chip Resistors
Size, Power Rating
Code
XGN
1GN
2RC
2RK
3EK
6EN
8EN
14N
12N
12S
1TN
Inch
01005
0201
0402
0402
0603
0805
1206
1210
1812
2010
2512
Power R.
0.031 W
0.05 W
0.1 W
0.1 W
0.1 W
0.125 W
0.25 W
0.5 W
0.75 W
0.75 W
1 W
The first three digits are significant figures
of resistance and the last one denotes
number of zeros following.
Decimal point is expressed by "R".
Example : 1002 10 kΩ
Resistance Value
Resistance Tolerance
Code
F
Tolerance
±1 %
Packaging Methods
Code
U
Embossed Carrier Taping
W4P1, 40,000 pcs.
ERJXGN
CPressed Carrier Taping
2 mm pitch, 15,000 pcs. ERJ1GN
XPunched Carrier Taping
2 mm pitch, 10,000 pcs.
ERJ2RC
ERJ2RK
Embossed Carrier Taping
4 mm pitch, 4,000 pcs. ERJ1TN
VPunched Carrier Taping
4 mm pitch, 5,000 pcs.
ERJ3EK
ERJ6EN
ERJ8EN
U
Embossed Carrier Taping
4 mm pitch, 5,000 pcs.
ERJ14N
ERJ12N
ERJ12S
Packaging Part No.
YPressed Carrier Taping
W8P2, 20,000 pcs.
Construction Dimensions in mm (not to scale)
Protective coating
Alumina substrate Electrode (Inner)
Electrode
(Between)
Thick film
resistive element Electrode (Outer)
Part No. Dimensions (mm)
Mass (Weight)
[g/1000 pcs.]
LWa b t
ERJXG 0.40±0.02 0.20±0.02 0.10±0.03 0.10±0.03 0.13±0.02 0.04
ERJ1G, 1R 0.60±0.03 0.30±0.03 0.10±0.05 0.15±0.05 0.23±0.03 0.15
ERJ2R1.00±0.05 0.50±0.05 0.20±0.10 0.25±0.05 0.35±0.05 0.8
ERJ3R
ERJ3EK 1.60±0.15 0.80+0.15 0.30±0.20 0.30±0.15 0.45±0.10 2
ERJ6R
ERJ6EN 2.00±0.20 1.25±0.10 0.40±0.20 0.40±0.20 0.60±0.10 4
ERJ8EN 3.20+0.05 1.60+0.05 0.50±0.20 0.50±0.20 0.60±0.10 10
ERJ14N 3.20±0.20 2.50±0.20 0.50±0.20 0.50±0.20 0.60±0.10 16
ERJ12N 4.50±0.20 3.20±0.20 0.50±0.20 0.50±0.20 0.60±0.10 27
ERJ12S 5.00±0.20 2.50±0.20 0.60±0.20 0.60±0.20 0.60±0.10 27
ERJ1TN 6.40±0.20 3.20±0.20 0.65±0.20 0.60±0.20 0.60±0.10 45
–0.05
–0.15–0.20
ERJXGN, 1GN, 2RC, 2RK, 3EK, 6EN, 8EN, 14N, 12N, 12S, 1TN Series, ±1 %
Mar. 201910
Panasonic HCWV=\
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Precision Thick Film Chip Resistors
– 9 –
–40
–20 0 20 40 60 80 100 120 140 160
0180
–60
70 °C
–55 °C
Ambient Temperature (°C)
20
40
60
80
100
Rated Load (%)
125 °C 155 °C
2R, 3R, 6R,
3E, 6E, 8E,
14, 12, 1T
XG, 1G, 1R
Part No.
(inch size)
Power Rating
at 70 °C
(4)
(W)
Limiting Element
Voltage
(1)
(V)
Maximum Overload
Voltage
(2)
(V)
Resistance
Tolerance
(%)
Resistance
Range
(Ω)
T.C.R.
(×10–6/°C)
Category
Temperature Range
(°C)
AEC-Q200
Grade
ERJ1RH
(0201) 0.05 15 30 ±0.5 1k to 1M
(E24, E96) ±50 –55 to +125
ERJ2RH
(0402) 0.063 50 100 ±0.5 100 to 100k
(E24, E96) ±50 –55 to +155 Grade 0
ERJ2RK
(0402) 0.063 50 100 ±0.5 10 to 97.6
102k to 1M
(E24, E96) ±100 –55 to +155 Grade 0
ERJ3RB
(0603) 0.1 50 100 ±0.5 100 to 100k
(E24, E96) ±50 –55 to +155 Grade 0
ERJ3RE
(0603) 0.1 50 100 ±0.5 10 to 97.6
102k to 1M
(E24, E96) ±100 –55 to +155 Grade 0
ERJ6RB
(0805) 0.1 150 200 ±0.5 100 to 100k
(E24, E96) ±50 –55 to +155 Grade 0
ERJ6RE
(0805) 0.1 150 200 ±0.5 10 to 97.6
102k to 1M
(E24, E96) ±100 –55 to +155 Grade 0
Part No.
(inch size)
Power Rating
at 70 °C
(4)
(W)
Limiting Element
Voltage
(1)
(V)
Maximum Overload
Voltage
(2)
(V)
Resistance
Tolerance
(%)
Resistance
Range
(Ω)
T.C.R.
(×10–6/°C)
Category
Temperature Range
(°C)
AEC-Q200
Grade
ERJXGN
(01005) 0.031 15 30 ±1 10 to 1M(3)
(E24, E96)
<100 Ω : ±300
100 Ω ≤ : ±200
–55 to +125
ERJ1GN
(0201) 0.05 25 50 ±1 10 to 1M(3)
(E24, E96) ±200 –55 to +125 Grade 1
ERJ2RC
(0402) 0.1 50 100 ±1 1 to 9.76
(E24, E96) –100 to +600 –55 to +155 Grade 0
ERJ2RK
(0402) 0.1 50 100 ±1 10 to 1M
(E24, E96) ±100 –55 to +155 Grade 0
ERJ3EK
(0603) 0.1 75 150 ±1 10 to 1M
(E24, E96) ±100 –55 to +155 Grade 0
ERJ6EN
(0805) 0.125 150 200 ±1 10 to 2.2M
(E24, E96) ±100 –55 to +155 Grade 0
ERJ8EN
(1206) 0.25 200 400 ±1 10 to 2.2M
(E24, E96) ±100 –55 to +155 Grade 0
ERJ14N
(1210) 0.5 200 400 ±1 10 to 1M
(E24, E96) ±100 –55 to +155 Grade 0
ERJ12N
(1812) 0.75 200 500 ±1 10 to 1M
(E24, E96) ±100 –55 to +155 Grade 0
ERJ12S
(2010) 0.75 200 500 ±1 10 to 1M
(E24, E96) ±100 –55 to +155 Grade 0
ERJ1TN
(2512) 1 200 500 ±1 10 to 1M
(E24, E96) ±100 –55 to +155 Grade 0
<±1 %>
Ratings
<±0.5 %>
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
(1)
Rated Continuous Working Voltage (RCWV) shall be de ter mined from RCWV=Power Rating × Re sis tance Values, or Limiting Element Voltage list ed above, whichever less.
(2)
Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) × RCWV or Maximum Overload Voltage listed above, whichever less.
(3) Please contact us when you need a type with a resistance of less than 10 Ω.
(4) Use it on the condition that the case temperature is below the upper category temperature.
Mar. 201910
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Precision Thick Film Chip Resistors
– 10 –
Test Item Performance
Requirements Test Conditions
Resistance Within Specifi ed
Tolerance 20 °C
T. C. R. Within Specifi ed
T. C. R. +25 °C/+155 °C (ERJXG, ERJ1G : +25 °C/+125 °C)
Overload ±2 % Rated Voltage × 2.5, 5 s
Resistance to Soldering Heat
±1 % 270 °C, 10 s
Rapid Change of
Temperature ±1 % –55 °C (30min.) / +155 °C (ERJXG, ERJ1G : +125 °C) (30min.),
100 cycles
High Temperature
Exposure ±1 % +155 °C (ERJXG, ERJ1G : +125 °C) , 1000 h
Damp Heat, Steady State ±1 % 60 °C, 90 % to 95 %RH, 1000 h
Load Life in Humidity ±2 %
ERJXG, ERJ1G: ±3 %
60 °C, 90 % to 95 %RH, Rated Voltage,
1.5 h ON/0.5 h OFF cycle, 1000 h
Endurance at 70 °C ±2 %
ERJXG, ERJ1G: ±3 % 70 °C, Rated Voltage, 1.5 h ON/0.5 h OFF cycle, 1000 h
Test Item Performance
Requirements Test Conditions
Resistance Within Specifi ed
Tolerance 20 °C
T. C. R. Within Specifi ed
T. C. R. +25 °C/+125 °C
Overload ±2 % Rated Voltage × 2.5, 5 s
Resistance to Soldering Heat
±1 % 270 °C, 10 s
Rapid Change of
Temperature ±1 % –55 °C (30min.) / +155 °C (ERJ1R : +125 °C) (30min.), 100 cycles
High Temperature
Exposure ±1 % +155 °C (ERJ1R : +125 °C) , 1000 h
Damp Heat, Steady State ±1 % 60 °C, 90 % to 95 %RH, 1000 h
Load Life in Humidity ±2 %
ERJ1R: ±3 %
60 °C, 90 % to 95 %RH, Rated Voltage,
1.5 h ON/0.5 h OFF cycle, 1000 h
Endurance at 70 °C ±2 %
ERJ1R: ±3 % 70 °C, Rated Voltage, 1.5 h ON/0.5 h OFF cycle, 1000 h
Perfomance
ERJXGN, 1GN, 2RC, 2RK, 3EK, 6EN, 8EN, 14N, 12N, 12S, 1TN Series, ±1 %(F)
ERJ1R, 2R, 3R, 6R Series, ±0.5 %(D)
Mar. 201910
Panasonic DDDDDDDDDDD [—1 Fl _1
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Metal Film (Thin Film) Chip Resistors, High Reliability Type
– 11 –
E
1
R
2
A
3
3
4
A
5
E
6
B
7
1
8
0
9
2
10
V
11
Inch
0201
0402
0603
0805
1206
Metal Film
Chip Resistors
Product Code Size, Power Rating
Code Power Rating
0.05 W
0.063 W
0.1 W
0.125 W
0.25 W
Temperature Coefficient
Code
R
P
E
H
K
±10×10–6/°C
±15×10–6/°C
±25×10–6/°C
±50×10–6/°C
±100×10–6/°C
Resistance Tolerance
Code
W
B
C
D
Tolerance
±0.05 %
±0.1 %
±0.25 %
±0.5 %
Resistance Value
Consist of three figures for E24 series resistance value.
The first two digits are significant figures of resistance
and the third one denotes number of zeros following.
(example) 102 : 1k Ω
Packaging Methods
Code
C
X
V
Packaging Part No.
T.C.R.
1A
2A
3A
6A
8A
Punched Carrier Taping
2 mm pitch, 10000 pcs.
Punched CarrierTaping
4 mm pitch, 5000 pcs.
ERA2A
Pressed Carrier Taping
2 mm pitch, 15000 pcs. ERA1A
ERA3A
ERA6A
ERA8A
E
1
R
2
A
3
3
4
A
5
E
6
B
7
1
8
0
9
1
11
V
12
Metal Film
Chip Resistors
Product Code Size, Power Rating
Code Power Rating
0.05 W
0.063 W
0.1 W
0.125 W
0.25 W
Temperature Coefficient
Code
R
P
E
H
K
±10×10–6/°C
±15×10–6/°C
±25×10–6/°C
±50×10–6/°C
±100×10–6/°C
Resistance Tolerance
Code
W
B
C
D
Tolerance
±0.05 %
±0.1 %
±0.25 %
±0.5 %
Resistance Value
Consist of four figures for E96 series resistance value.
The first three digits are significant figures of resistance
and the fourth one denotes number of zeros following.
(example) 1051 : 1.05k Ω
T.C.R.
1A
2A
3A
6A
8A
5
10
Packaging Methods
Code
C
X
V
Packaging Part No.
Punched Carrier Taping
2 mm pitch, 10000 pcs.
Punched CarrierTaping
4 mm pitch, 5000 pcs.
ERA2A
Pressed Carrier Taping
2 mm pitch, 15000 pcs. ERA1A
ERA3A
ERA6A
ERA8A
Inch
0201
0402
0603
0805
1206
Metal Film (Thin Film) Chip Resistors,
High Reliability Type
Type: ERA 1A, 2A, 3A, 6A, 8A
Explanation of Part Numbers
Features
High reliability ................ Stable at high temperature and humidity
(85 °C 85 %RH rated load, Category temperature range : –55 °C to +155 °C)
High accuracy ............... Small resistance tolerance and Temperature Coef cient of Resistance
High performance ......... Low current noise, excellent linearity
Reference Standard ...... IEC 60115-8, JIS C 5201-8, EIAJ RC-2133B
AEC-Q200 qualifi ed
RoHS compliant
As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
E24 Series
E96 Series and other Resistance values
note : Duplicated resistance values as E24 series part
numbers shall follow E24 part numbers.
(apply three digit resistance value)
Sep. 201812
Panasonic RCW\/=\
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Metal Film (Thin Film) Chip Resistors, High Reliability Type
– 12 –
a
b
t
W
L
Construction Dimensions in mm (not to scale)
Ratings
(1)
Rated Continuous Working Voltage (RCWV) shall be de ter mined from RCWV=Rated Power × Re sis tance Values, or Limiting Element Voltage list ed above, whichever less.
(2) Overload (Short-time Overload) Test Voltage (SOTV) shall be de termined from SOTV=2.5 × RCWV or max. Over load Volt age list ed above which ev er less.
(3) E192 series resistance values are also available. Please contact us for details.
(4) Duplicated resistance values between E96, E192 and E24 series shall follow E24 Part Numbers. (apply three digit resistance value)
Part No.
(inch size)
Power Rating
at 85 °C
(W)
Limiting Element
Voltage(1)
(V)
Maximum
Overload Voltage
(
2)
(V)
Part No.
(detail)
Resistance
Tolerance
(%)
T.C.R.
(×10–6/°C)
Resistance
Range
(3)(4)
(Ω)
Category
Temperature Range
C)
ERA1A
(0201) 0.05 25 50
ERA1AEB ±0.1 ±25
100 to 10k (E24, E96)
–55 to +155
ERA1AEC ±0.25
ERA1ARC ±0.25
±10
100 to 10k (E24, E96)
ERA1ARB ±0.1
ERA1ARW ±0.05
1k to 10k (E24, E96)
ERA2A
(0402) 0.063 50 100
ERA2AKD ±0.5 ±100
10 to 46.4 (E24, E96)
ERA2AED ±0.5
±25
47 to 100k (E24, E96)
ERA2AEC ±0.25
ERA2AEB ±0.1
ERA2APC ±0.25 ±15
200 to 47k (E24, E96)
ERA2APB ±0.1
ERA2ARC ±0.25 ±10
200 to 47k (E24, E96)
ERA2ARB ±0.1
ERA3A
(0603) 0.1 75 150
ERA3AHD ±0.5 ±50
10 to 46.4 (E24, E96)
ERA3AED ±0.5
±25
47 to 330k (E24, E96)
ERA3AEC ±0.25
ERA3AEB ±0.1
ERA3APC ±0.25 ±15
470 to 100k (E24, E96)
ERA3APB ±0.1
ERA3ARC ±0.25
±10
1k to 100k (E24, E96)
ERA3ARB ±0.1
ERA3ARW ±0.05
ERA6A
(0805) 0.125 100 200
ERA6AHD ±0.5 ±50
10 to 46.4 (E24, E96)
ERA6AED ±0.5
±25
47 to 1M (E24, E96)
ERA6AEC ±0.25
ERA6AEB ±0.1
ERA6APC ±0.25 ±15
470 to 100k (E24, E96)
ERA6APB ±0.1
ERA6ARC ±0.25
±10
1k to 100k (E24, E96)
ERA6ARB ±0.1
ERA6ARW ±0.05
ERA8A
(1206) 0.25 150 300
ERA8AHD ±0.5 ±50
10 to 46.4 (E24, E96)
ERA8AED ±0.5
±25
47 to 1M (E24, E96)
ERA8AEC ±0.25
ERA8AEB ±0.1
ERA8APC ±0.25 ±15
470 to 100k (E24, E96)
ERA8APB ±0.1
ERA8ARC ±0.25
±10
1k to 100k (E24, E96)
ERA8ARB ±0.1
ERA8ARW ±0.05
Protective coating
Alumina substrate
Electrode (Inner)
Electrode
(Between)
High reliability
metal film Electrode (Outer)
Part No.
(inch size)
Dimensions (mm)
Mass (Weight)
[g/1000 pcs.]
LWa b t
ERA1A (0201) 0.60±0.03 0.30±0.03 0.15±0.05 0.15±0.05 0.23±0.03 0.14
ERA2A (0402) 1.00±0.10 0.50+0.10 0.15±0.10 0.25±0.10 0.35±0.05 0.6
ERA3A (0603) 1.60±0.20 0.80±0.20 0.30±0.20 0.30±0.20 0.45±0.10 2
ERA6A (0805) 2.00±0.20 1.25±0.10 0.40±0.25 0.40±0.25 0.50±0.10 4
ERA8A (1206) 3.20±0.20 1.60+0.05 0.50±0.25 0.50±0.25 0.60±0.10 8
–0.05
–0.15
Sep. 201812
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Metal Film (Thin Film) Chip Resistors, High Reliability Type
– 13 –
–40 –20 0 20 40 60 80 100 120 140 160
0180–60
85 °C
–55 °C
20
40
60
80
100
Rated Load (%)
Ambient Temperature (°C)
155 °C
Power Derating Curve
For resistors operated in ambient temperatures above
85 °C, power rating shall be derated in accordance
with the figure on the right.
Sep. 201812
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
High Precision Thick Film Chip Resistors
– 14 –
E
1
R
2
J
3
P
4
B
5
6
6
B
7
1
8
0
9
0
10
2
11
V
12
Thick Film
Chip Resistors
Product Code Size, Power Rating
Code
PB3
PB6
Power R.
0.20 W
0.25 W
Resistance Tolerance
Code
B
D
Tolerance
± 0.1 %
± 0.5 %
The first three digits are significant figures of
resistance and the last one denotes number of
zeros following.
Example : 5110 511 Ω
: 1003 100 kΩ
Resistance Value Packaging Methods
Code Part No.
ERJPB3
ERJPB6
Packaging
VPunched Carrier Taping
4 mm pitch, 5,000 pcs.
Inch
0603
0805
High Precision
Thick Film Chip Resistors
Type: ERJ PB3, PB6
Achieve the resistance tolerance ±0.1 % with high reliability metal glaze thick fi lm resistor
Guarantee the temperature coef cient of Resistance ±50×10−6/°C in high resistance range up to 1 MΩ
Suitable for both refl ow and fl ow soldering
High power 0.20 W : 0603 inch / 1608 mm size (ERJPB3)
0.25 W : 0805 inch / 2012 mm size (ERJPB6)
Reference StandardsIEC 60115-8, JIS C 5201-8, JEITA RC-2134C
AEC-Q200 qualifi ed
RoHS compliant
As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Features
Explanation of Part Numbers
Thick fi lm
resistive element
Electrode (Inner)
Electrode (Outer)
Electrode
(Between)
Alumina substrate
Protective coating
Part No. Dimensions (mm)
Mass (Weight)
[g/1000 pcs.]
LWa b t
ERJPB3 1.60±0.15 0.80+0.15 0.15+0.15 0.25±0.10 0.45±0.10 2
ERJPB6 2.00±0.20 1.25±0.10 0.25±0.20 0.40±0.20 0.60±0.10 4
0.05 –0.10
Construction Dimensions in mm (not to scale)
Feb. 201901
Panasonic ncvwa
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
High Precision Thick Film Chip Resistors
– 15 –
–60 –40 –20 0 20 40 60 80 100 120 140 160 180
0
20
40
60
80
100 70 °C
155 °C
Ambient Temperature (°C)
Rated Load (%)
–55 °C
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance with
the fi gure on the right.
Ratings
Part No.
(inch size)
Power
Rating
e
(3)
at 70 °C
(W)
Limiting
Element
Voltage
(1)
(V)
Maximum
Overload
Voltage
(2)
(V)
Resistance
Tolerance
(%)
Resistance
Range
(Ω)
T.C.R.
(×10–6/°C)
Category
Temperature
Range
(°C)
AEC-Q200
Grade
ERJPB3
(0603) 0.20 150 200 ±0.1
±0.5
200 to 100 k
(E24, E96) ±50 –55 to +155 Grade 0
ERJPB6
(0805) 0.25 150 200 ±0.1
±0.5
200 to 1 M
(E24, E96) ±50 –55 to +155 Grade 0
(1)
Rated Continuous Working Voltage (RCWV) shall be de ter mined from RCWV=Power Rating × Re sis tance Values, or Limiting Element Voltage list ed above, whichever less.
(2)
Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) × RCWV or Maximum Overload Voltage listed above, whichever less.
(3) Use it on the condition that the case temperature is below the upper category temperature.
Test Item Performance
Requirements Test Conditions
Resistance Within Specifi ed
Tolerance 20 °C
T. C. R. Within Specifi ed
T. C. R. +25 °C/+125 °C
Overload ±0.5 % Rated Voltage × 2.0, 5 s
Resistance to Soldering Heat
±0.5 % 270 °C, 10 s
Rapid Change of
Temperature ±0.5 % –55 °C (30min.) / +155 °C (30min.), 100 cycles
High Temperature
Exposure ±0.5 % +155 °C , 1000 h
Damp Heat, Steady State ±0.5 % 60 °C, 90 % to 95 %RH, 1000 h
Load Life in Humidity ±0.5 % 60 °C, 90 % to 95 %RH, Rated Voltage,
1.5 h ON / 0.5 h OFF cycle, 1000 h
Endurance at 70 °C ±0.5 % 70 °C, Rated Voltage, 1.5 h ON / 0.5 h OFF cycle, 1000 h
Perfomance
Feb. 201901
Panasonic --IE“mJ % 0 H H a 2LW 0402 0 2 W 10m 0 GLW 0603 0 25 W 5m (1,10m fl SLW 0805 0 5 W 5. 6, 7‘ 8, 9m (1 2EW 0402 0 25 W Um (I ha 100m fl SEW 0603 0 33 W 20m (I ha 100m fl saw 0805 o 5 w 10m n m mom :1 60W 0805 o 5 w 10m n m 30m :1
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Thick Film Chip Resistors / Low Resistance Type
– 16 –
E
1
R
2
J
3
2
4
B
5 6
W
7
G
8
R
9
0
10
4
11
7
12
X
Thick Film
Chip Resistors
Product Code
Resistance Tolerance
Code
D
F
G
J
Tolerance
± 0.5 %
± 1 %
± 2 %
± 5 %
Shown by 4 digits or letters.
(Ex.) R047 : 0.047 Ω=47m Ω
Resistance Value Packaging Methods
Code Packaging Part No.
X
Pressed Carrier Taping
2 mm pitch, 10,000 pcs.
ERJ3LW
ERJ6LW
ERJ3BW
ERJ6BW
ERJ8BW
ERJ6CW
ERJ8CW
ERJ2LW
ERJ2BW
V
Punched Carrier Taping
4 mm pitch, 5,000 pcs.
Code Inch
2LW
3LW
6LW
2BW
3BW
6BW
8BW
6CW
8CW
0402
0603
0805
0402
0603
0805
1206
0805
1206
0.2 W
0.25 W
0.5 W
0.25 W
0.33 W
0.5 W
1 W
0.5 W
1 W
Power Rating
Resistance Value
10m Ω
5m Ω,10m Ω
5, 6, 7, 8, 9m Ω
47m Ω to 100m Ω
20m Ω to 100m Ω
10m Ω to 100m Ω
10m Ω to 100m Ω
10m Ω to 30m Ω
10m Ω to 50m Ω
Please refer to the rating table
for the resistance tolerance
Explanation of Part Numbers
As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Thick Film Chip Resistors / Low Resistance Type
Type: ERJ 2LW, 3LW, 6LW
2BW, 3BW, 6BW,
8BW, 6CW, 8CW
ERJ 2B, 3B, 6D, 6B, 8B,
14B, 3R, 6R, 8R, 14R,
12R, 12Z, 1TR
ERJ L03, L06, L08, L14,
L12, L1D, L1W
Current Sensing resistor
Small size and lightweight
Realize both low-resistance & High-precision by original thick fi lm resistive element & special electrode structure
Suitable for both refl ow and fl ow sol der ing
Realize High-power by double-sided resistive elements structure that aimed
to suppress temperature rising : ERJ2LW, 3LW, 6LW, 2BW, 3BW, 6BW, 8BW, 6CW, 8CW
Low TCR : ±75×10–6/°C (ERJ6CW, 8CW)
Low Resistance Value : Thick fi lm resistors available from 5m Ω (ERJ3LW, 6LW)
Reference Standards : IEC 60115-8, JIS C 5201-8, JEITA RC-2144
AEC-Q200 qualifi ed
RoHS compliant
Features
ERJ2LW, 3LW, 6LW, 2BW, 3BW, 6BW, 8BW, 6CW, 8CW
<High power (double-sided resistive elements structure) type>
Feb. 201815
Panasonic DDDDDDDDD ’:|7 1D CDIIDCDDD
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Thick Film Chip Resistors / Low Resistance Type
– 17 –
E
1
R
2
J
3
L
4
1
5
4
6
K
7
J
8
5
9
0
10
M
11
U
12
Thick Film
Chip Resistors
Product Code Size, Power Rating
Type Inch
0.2 W
0.25 W
0.33 W
0.33 W
0.5 W
0.5 W
1 W
Power R.
Code
K
U
Resistance Tolerance
Code
F
J
Tolerance
± 1 %
± 5 %
Shown by 3 digits or letters.
(Ex.) 50M:50m Ω, 10 C:100m Ω
Resistance Value
Packaging Methods
Code
V
U
Packaging Part No.
Punched Carrier Taping
4 mm pitch, 5,000 pcs.
Embossed Carrier Taping
4 mm pitch, 5,000 pcs.
Embossed Carrier Taping
4 mm pitch, 3,000 pcs.
ERJL03
ERJL06
ERJL08
ERJL14
ERJL12
ERJL1D
ERJL1W
Std.
20m Ω to 100m Ω
Res. Value
L03
L06
L08
L14
L12
L1D
L1W
20m Ω, 22m Ω, 33m Ω,
39m Ω, 47m Ω, 50m Ω,
100m Ω
L03, L06, L08 : 47m Ω to 100m Ω
L1D, L1W : 40m Ω to 100m Ω
0603
0805
1206
1210
1812
2010
2512
E
1
R
2
J
3
8
4
R
5 6
Q
7
F
8
R
9
2
10
2
11
V
Thick Film
Chip Resistors
Product Code Size, Power Rating
Type
0.166 W
0.25 W
0.1 W
0.5 W
0.33 W
0.125 W
0.5 W
0.25 W
0.5 W
0.25 W
0.5 W
0.5 W
1 W
Power R.
Resistance Value
Code
S
Q
0.1 Ω to 0.2 Ω
0.22 Ω to 9.1 Ω
Resistance Tolerance
Code
D
F
G
J
Tolerance
± 0.5 %
± 1 %
± 2 %
± 5 %
Shown by 3 digits or letters.
Only when it is D (E24,E96)
or F (E96), shown by
4 digits or letters.
(Ex.) R22 : 0.22 Ω
R102 : 0.102 Ω
Resistance Value
Packaging Methods
Code Packaging Part No.
Punched Carrier Taping
4 mm pitch, 5,000 pcs.
Embossed Carrier Taping
4 mm pitch, 5,000 pcs.
2B
3B
3R
6D
6B
6R
8B
8R
14B
14R
12R
12Z
1TR
Res. Value
V
X
U
Punched Carrier Taping
2 mm pitch, 10,000 pcs.
Embossed Carrier Taping
4 mm pitch, 4,000 pcs.
ERJ2B
ERJ3B/3R
ERJ6D/6B/6R
ERJ8B/8R
ERJ14B/14R
ERJ12R
ERJ12Z
ERJ1TR
2B : 0.22 Ω to 1.0 Ω
Inch
0402
0603
0603
0805
0805
0805
1206
1206
1210
1210
1812
2010
2512
Please refer to the
rating table for the
resistance tolerance
ERJL03, L06, L08, L14, L12, L1D, L1W <Low TCR type>
<High power (double-sided resistive elements structure) type>
(1) Please contact us when resistors of irregular series are needed.
(2) Use it on the condition that the case temperature is below the upper category temperature.
·
Rated Continuous Working Voltage (RCWV) shall be determined from RCWV = Power Rating × Resistance Values.
· Overload Test Voltage (OTV) shall be determined from OTV = Specified Magnification (refer to performance) × RCWV.
Part No.
(inch size)
Power Rating
(2)
at 70 °C
(W)
Resistance
Tolerance
(%)
Resistance (1)
Range
(Ω)
T.C.R.
(×10–6/°C)
Category
Temperature Range
(°C)
AEC-Q200
Grade
ERJ2LW (0402) 0.2 ±1, ±2, ±5 10m 0 to 500 –55 to +125 Grade 1
ERJ3LW (0603) 0.25 ±1, ±2, ±5 5m 0 to 700 –55 to +125 Grade 1
10m 0 to 300 –55 to +125
ERJ6LW (0805) 0.5 ±1, ±2, ±5 5, 6, 7, 8, 9m 0 to 300 –55 to +125 Grade 1
ERJ2BW (0402) 0.25 ±1, ±2, ±5 47m to 100m (E24) ±300 –55 to +155 Grade 0
ERJ3BW (0603) 0.33 ±1, ±2, ±5 20m to 100m (E24)
20m Ω R < 39m Ω : ±250
39m Ω R ≤ 100m Ω : ±150
–55 to +155 Grade 0
ERJ6BW (0805) 0.5 ±1, ±2, ±5 10m to 100m (E24)
10m Ω R < 15m Ω : ±300
15m Ω R ≤ 100m Ω : ±200
–55 to +155 Grade 0
ERJ8BW (1206) 1 ±1, ±2, ±5 10m to 100m (E24)
10m Ω R < 20m Ω : ±200
20m Ω R < 47m Ω : ±150
47m Ω R ≤ 100m Ω : ±100
–55 to +155 Grade 0
ERJ6CW (0805) 0.5
±0.5, ±1, ±2, ±5
10m to 30m (E24) ±75 –55 to +125 Grade 1
ERJ8CW (1206) 1 ±1, ±2, ±5 10m to 50m (E24) ±75 –55 to +125 Grade 1
ERJ2BS/2BQ, 3BS/3BQ, 6BS/6BQ, 8BS/8BQ, 14BS/14BQ, 6D, 3R, 6R, 8R, 14R, 12R, 12Z, 1TR
<High power type/Standard type>
Ratings
Feb. 201815
Panasonic W V P x
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Thick Film Chip Resistors / Low Resistance Type
– 18 –
Part No.
(inch size)
Power Rating
(2)
at 70 °C
(W)
Resistance
Tolerance
(%)
Resistance (1)
Range
(Ω)
T.C.R.
(×10–6/°C)
Category
Temperature Range
(°C)
AEC-Q200
Grade
ERJ3RS (0603)
0.1 ±1, ±2, ±5
0.10 to 0.20 (E24) ±300 –55 to +155 Grade 0
ERJ3RQ (0603) 0.22 to 0.91 (E24)
1.0 to 9.1 (E24) ±200
ERJ6RS (0805)
0.125 ±1, ±2, ±5
0.10 to 0.20 (E24) ±250 –55 to +155 Grade 0
ERJ6RQ (0805) 0.22 to 0.91 (E24)
1.0 to 9.1 (E24) ±200
ERJ8RS (1206)
0.25 ±1, ±2, ±5
0.10 to 0.20 (E24) ±250 –55 to +155 Grade 0
ERJ8RQ (1206) 0.22 to 0.91 (E24)
1.0 to 9.1 (E24) ±200
ERJ14RS (1210)
0.25 ±1, ±2, ±5
0.10 to 0.20 (E24) ±200 –55 to +155 Grade 0
ERJ14RQ (1210) 0.22 to 0.91 (E24)
1.0 to 9.1 (E24) ±100
ERJ12RS (1812)
0.5 ±1, ±2, ±5
0.10 to 0.20 (E24) ±200 –55 to +155 Grade 0
ERJ12RQ (1812) 0.22 to 0.91 (E24)
1.0 to 9.1 (E24) ±100
ERJ12ZS (2010)
0.5 ±1, ±2, ±5
0.10 to 0.20 (E24) ±200 –55 to +155 Grade 0
ERJ12ZQ (2010) 0.22 to 0.91 (E24)
1.0 to 9.1 (E24) ±100
ERJ1TRS (2512)
1 ±1, ±2, ±5
0.10 to 0.20 (E24) ±200 –55 to +155 Grade 0
ERJ1TRQ (2512) 0.22 to 0.91 (E24)
1.0 to 9.1 (E24) ±100
<Standard type>
(1) Please contact us when resistors of irregular series are needed.
(2) Use it on the condition that the case temperature is below the upper category temperature.
(3) E96 series also have ±0.5 %, ±1 % line-up.
·
Rated Continuous Working Voltage (RCWV) shall be determined from RCWV = Power Rating × Resistance Values.
· Overload Test Voltage (OTV) shall be determined from OTV = Specified Magnification (refer to performance) × RCWV.
(1) Please contact us when resistors of irregular series are needed.
(2) Use it on the condition that the case temperature is below the upper category temperature.
·
Rated Continuous Working Voltage (RCWV) shall be determined from RCWV = Power Rating × Resistance Values.
· Overload Test Voltage (OTV) shall be determined from OTV = Specified Magnification (refer to performance) × RCWV.
<High power type>
Ratings
Part No.
(inch size)
Power Rating
(2)
at 70 °C
(W)
Resistance (3)
Tolerance
(%)
Resistance (1)
Range
(Ω)
T.C.R.
(×10–6/°C)
Category
Temperature Range
(°C)
AEC-Q200
Grade
ERJ2BS (0402) 0.166 ±1, ±2, ±5
0.10 to 0.20 (E24)
±300 –55 to +155 Grade 0
ERJ2BQ (0402)
0.22 to 1.0 (E24)
±250
ERJ3BS (0603)
0.25 ±1, ±2, ±5
0.10 to 0.20 (E24)
±300 –55 to +155 Grade 0
ERJ3BQ (0603)
0.22 to 0.91 (E24)
1.0 to 9.1 (E24)
±200
ERJ6DS (0805) 0.5 ±0.5, ±1,
±2, ±5
0.10 to 0.20 (E24, E96)
±150 –55 to +155 Grade 0
ERJ6DQ (0805)
0.22 to 9.1 (E24, E96)
±100
ERJ6BS (0805)
0.33 ±1, ±2, ±5
0.10 to 0.20 (E24)
±250 –55 to +155 Grade 0
ERJ6BQ (0805)
0.22 to 0.91 (E24)
1.0 to 9.1 (E24)
±200
ERJ8BS (1206)
0.5 ±1, ±2, ±5
0.10 to 0.20 (E24)
±250 –55 to +155 Grade 0
ERJ8BQ (1206)
0.22 to 0.91 (E24)
1.0 to 9.1 (E24)
±200
ERJ14BS (1210)
0.5 ±1, ±2, ±5
0.10 to 0.20 (E24)
±200 –55 to +155 Grade 0
ERJ14BQ (1210)
0.22 to 0.91 (E24)
1.0 to 9.1 (E24)
±100
Feb. 201815
Panasonic ory V x Magmflcauo @
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Thick Film Chip Resistors / Low Resistance Type
– 19 –
–40 –20 0 20 40 60 80 100 120 140 160
0
180–60
155 °C
70 °C
Ambient Temperature (°C)
20
40
60
80
100
Rated Load (%)
–55 °C
125 °C
Protective coating
Alumina
substrate
Electrode (Inner)
Electrode
(Between)
Electrode (Outer)
Thick film
resistive element
a
b
t
W
L
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure below.
Dimensions in mm (not to scale)
Construction
Part No.
(inch size)
Power Rating
(2)
at 70 °C
(W)
Resistance
Tolerance
(%)
Resistance (1)
Range
(Ω)
T.C.R.
(×10–6/°C)
Category
Temperature Range
(°C)
AEC-Q200
Grade
ERJL03 (0603) 0.2 ±1, ±5 47m to 100m ±200 –55 to +125 Grade 1
ERJL06 (0805) 0.25 ±1, ±5 47m to 100m ±100 –55 to +125 Grade 1
ERJL08 (1206) 0.33 ±1, ±5 47m to 100m ±100 –55 to +125 Grade 1
ERJL14 (1210) 0.33 ±1, ±5 20m to 100m
R < 47m Ω : ±300
R ≥ 47m Ω : ±100
–55 to +125 Grade 1
ERJL12 (1812) 0.5 ±1, ±5 20m to 100m –55 to +125 Grade 1
ERJL1D (2010) 0.5 ±1, ±5 40m to 100m –55 to +125 Grade 1
ERJL1W (2512) 1 ±1, ±5 40m to 100m –55 to +125 Grade 1
<Low TCR type>
(1)
Standard R.V. : 20m Ω, 22m Ω, 33m Ω, 39m Ω, 47m Ω, 50m Ω, 100m Ω, Custom R.V. : Each 1m Ω within upper range.
(2) Use it on the condition that the case temperature is below the upper category temperature.
Rated Continuous Working Voltage (RCWV) shall be determined from RCWV = Power Rating × Resistance Values.
· Overload Test Voltage (OTV) shall be determined from OTV = Specified Magnification (refer to performance) × RCWV.
Part No. Dimensions (mm)
Mass(Weight)
[g/1000 pcs.]
LWa b t
ERJ2LW 1.00±0.10 0.50+0.10 0.25±0.10 0.25±0.10 0.40±0.05 0.8
ERJ2BW 1.00±0.10 0.50+0.10 0.24±0.10 0.24±0.10 0.35±0.05 0.8
ERJ2BS 1.00±0.10 0.50+0.10 0.20±0.10 0.27±0.10 0.35±0.05 0.8
ERJ2BQ
ERJ3LW
(5m Ω)1.60±0.15 0.80±0.15 0.50±0.20 0.50±0.20 0.55±0.10 3
ERJ3LW
(10m Ω)
ERJ3BW
1.60±0.15 0.80±0.15 0.40±0.20 0.40±0.20 0.55±0.10 3
ERJ3R
1.60±0.15 0.80+0.15 0.30±0.20 0.30±0.15 0.45±0.10 2ERJ3B
ERJL03
ERJ6LW 2.00±0.20 1.25±0.20 0.63±0.20 0.63±0.20 0.70±0.10 6
ERJ6BW 2.00±0.20 1.25±0.20 0.55±0.20 0.55±0.20 0.65±0.10 6
ERJ6CW
(10 to 13m Ω)
2.05±0.20 1.30±0.20
0.60±0.20 0.60±0.20
0.65±0.10 6
ERJ6CW
(15 to 30m Ω)
0.45±0.20 0.45±0.20
ERJ6D 2.00±0.20 1.25±0.10 0.40±0.20 0.55±0.25 0.60±0.10 5
ERJ6R
2.00±0.20 1.25±0.10 0.40±0.20 0.40±0.20 0.60±0.10 5ERJ6B
ERJL06
0.05
0.05
0.05
0.05
Part No. Dimensions (mm)
Mass(Weight)
[g/1000 pcs.]
LWa b t
ERJ8BW 3.20±0.20 1.60±0.20 1.00±0.20 1.00±0.20 0.65±0.10 13
ERJ8CW
(10 to 16m Ω)
3.20±0.20 1.60±0.20 1.10±0.20 1.10±0.20 0.65±0.10 13
ERJ8CW
(18 to 50m Ω)
3.20±0.20 1.60±0.20 0.60±0.20 0.60±0.20 0.65±0.10 13
ERJ8R
3.20+0.05 1.60+0.05 0.50±0.20 0.50±0.20 0.60±0.10 10ERJ8B
ERJL08
ERJ14R
3.20±0.20 2.50±0.20 0.50±0.20 0.50±0.20 0.60±0.10 16ERJ14B
ERJL14
ERJ12R 4.50±0.20 3.20±0.20 0.50±0.20 0.50±0.20 0.60±0.10 27
ERJL12
ERJ12Z
ERJL1D 5.00±0.20 2.50±0.20 0.60±0.20 0.60±0.20 0.60±0.10 27
ERJ1TR 6.40±0.20 3.20±0.20 0.65±0.20 0.60±0.20 0.60±0.10 45
ERJL1W 6.40±0.20 3.20±0.20 0.65±0.20 1.30±0.20 1.10±0.10 79
0.20 –0.15
Feb. 201815
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Thick Film Chip Resistors / Low Resistance Type
– 20 –
Test Item Performance
Requirements Test Conditions
Resistance Within Specifi ed
Tolerance 20 °C
T. C. R. Within Specifi ed
T. C. R. +25 °C/+125 °C
Overload ±2%
Rated Voltage × 2.0, 5 s
ERJ6LW : × 1.77, 5 s
ERJ8BW (R > 0.05 Ω) : × 1.77, 5 s
Resistance to Soldering Heat
±1% 270 °C, 10 s
Rapid Change of
Temperature
±1%
ERJ2LW : ±2%
–55 °C (30 min.) / +155 °C (ERJLW, ERJCW : +125 °C) (30 min.)
100 cycles
High Temperature Exposure ±1% +155 °C (ERJLW, ERJCW : +125 °C), 1000 h
Damp Heat, Steady State ±1% 60 °C, 90% to 95%RH, 1000 h
Load Life in Humidity ±3% 60 °C, 90% to 95%RH, Rated Voltage,
1.5 h ON/0.5 h OFF cycle, 1000 h
Endurance at 70 °C ±3% 70 °C, Rated Voltage, 1.5 h ON/0.5 h OFF cycle, 1000 h
Test Item Performance
Requirements Test Conditions
Resistance Within Specifi ed
Tolerance 20 °C
T. C. R. Within Specifi ed
T. C. R. +25 °C/+125 °C
Overload ±2% Rated Voltage × 2.5 (ERJ6D : × 1.77), 5 s
Resistance to Soldering Heat
±1% 270 °C, 10 s
Rapid Change of
Temperature ±1% –55 °C (30 min.) / +155 °C (30 min.), 100 cycles
High Temperature Exposure ±1% +155 °C, 1000 h
Damp Heat, Steady State ±1% 60 °C, 90% to 95%RH, 1000 h
Load Life in Humidity ±3% 60 °C, 90% to 95%RH, Rated Voltage,
1.5 h ON/0.5 h OFF cycle, 1000 h
Endurance at 70 °C ±3% 70 °C, Rated Voltage, 1.5 h ON/0.5 h OFF cycle, 1000 h
Test Item Performance
Requirements Test Conditions
Resistance Within Specifi ed
Tolerance 20 °C
T. C. R. Within Specifi ed
T. C. R. +25 °C/+125 °C
Overload ±2% Rated Voltage × 2.5, 5 s
Resistance to Soldering Heat
±1% 270 °C, 10 s
Rapid Change of
Temperature ±1% –55 °C (30 min.) / +125 °C (30 min.), 100 cycles
High Temperature Exposure ±1% +125 °C, 1000 h
Damp Heat, Steady State ±1% 60 °C, 90% to 95%RH, 1000 h
Load Life in Humidity ±3% 60 °C, 90% to 95%RH, Rated Voltage,
1.5 h ON/0.5 h OFF cycle, 1000 h
Endurance at 70 °C ±3% 70 °C, Rated Voltage, 1.5 h ON/0.5 h OFF cycle, 1000 h
ERJ2LW, 3LW, 6LW, 2BW, 3BW, 6BW, 8BW, 6CW, 8CW
<High power (double-sided resistive elements structure) type>
ERJ2BS/2BQ, 3BS/3BQ, 6BS/6BQ, 8BS/8BQ, 14BS/14BQ, 6D, 3R, 6R, 8R, 14R, 12R, 12Z, 1TR
<High power type/Standard type>
ERJL03, L06, L08, L14, L12, L1D, L1W <Low TCR type>
Performance
Feb. 201815
Panasonic II DIDDIIDDDDDD
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Current Sensing Resistors, Metal Plate Type
– 21 –
E
1
R
2
J
3
M
4
S
5
4
6 7
S
8
F
9
2
10
M
11
0
12
U
Product Code Resistance Value Packaging Methods
Code Packaging
Embossed Carrier Taping
4 mm pitch, 3,000 pcs.
U
Part No.
ERJMS4
ERJMB1
Embossed Carrier Taping
4 mm pitch, 2,000 pcs.
Metal Plate
Chip Resistors
Resistance Tolerance
Tolerance
±1 %
Shown by 3 digits or
letters.Decimal point
is expressed by M as
2.0 mΩ=2M0,
10.0 mΩ=10
Code
F
Type Code
Inch size
2512
2512
1020
Electrode type
Standard
Narrow
Standard
Code
S4S
S4H
B1S
–40
0 40 80 120 160
0200
–80
100 °C−65 °C 130 °C
170 °C
Terminal Temperature (°C)
20
40
60
100
80
120
Rated Load (%)
ERJMS4H
(7 to 10 mΩ)
Current Sensing Resistors,
Metal Plate Type
Type: ERJ MS4, MB1
Explanation of Part Numbers
Ideal for current sensing solution
Small case size with high power
Metal plate bonding technology. Excellent long term stability
Outer Resin with high heat dissipation. Wide temperature range (-65 °C to +170 °C)
AEC-Q200 qualifi ed
RoHS compliant
ISO9001, ISO/TS16949 certifi ed
As for Packaging Methods, Soldering Conditions and Safety Precautions,
Please see Data Files
Part No.
(inch size)
Power Rating
at 70 °C
(W)
Resistance
Range
(mΩ)
Resistance
Tolerance
(%)
T.C.R.
(×10–6/°C)
Category
Temperature Range
(°C)
Terminal temp.
upper limit
(°C)
ERJMS4S
(2512) 3 1, 2, 3, 4 F : ±1 ±75 –65 to +170 130
ERJMS4H
(2512)
3 5, 6 F : ±1 ±75 –65 to +170 130
2 7, 8, 9, 10 F : ±1 ±75 –65 to +170 100
ERJMB1S
(1020) 2 1, 2, 3, 4, 5 F : ±1 ±75 –65 to +170 130
Please contact us when resistors of irregular series are needed.
<Supplemented>
In the case of the temperature measurement of the terminal portion of
the resistor, Please perform under the following conditions.
1) Terminal temperature measurement, please apply the temperature of
the higher of either the left or right electrode upper surface of the
resistor.
2) Please measure the temperature of the resistor in the land pattern
printed of circuit board and plan to use by real conditions.
Power Derating Curve
If the terminal temperature of the resistor is more than
terminal temperature upper limit value of the rated
table, please reduce the rated power according to the
Power Derating Curve shown in the figure on the right.
Features
Ratings
Apr. 201905
Panasonic w — —
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Current Sensing Resistors, Metal Plate Type
– 22 –
Resistive Element (Metal Plate)
Protective Film
Surface Treatment (Ni/Sn)
Electrode (Metal)
LA
W
t
ac
b
–1
–0.5
0
0.5
1
–80 –60 –40 –20 0 20 40 60 80 100 120 140 160 180
Change of Resistance (%)
Temperature (°C)
–1
–0.5
0
0.5
1
2000
ERJMS4SF2M0U 140 °C Storage
0 4000 6000 8000
Change of Resistance (%)
est Time (hrs)
LA
W
t
ac
b
Land Pattern
ERJMS4S/ERJMS4H ERJMB1S
Construction
Dimensions in mm (not to scale), Recommended Land Pattern
Part No.
(inch size)
Dimension (mm) Recommended Land Pattern (mm) Mass (Weight)
(g/1000 pcs.)
LWA t a b c
ERJMS4S
(2512) 6.40±0.25 3.20±0.25 2.20±0.25 1.20±0.15 2.7 3.4 2.0 120
ERJMS4H
(2512) 6.40±0.25 3.20±0.25 1.25±0.25 1.20±0.15 1.7 3.4 4.0 115
ERJMB1S
(1020) 2.55±0.25 5.00±0.25 0.68+0.15 0.90±0.15 1.15 5.5 1.1 40
−0.20
Typical Temperature dependence of electrical resistance
Long-term stability
Apr. 201905
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Current Sensing Resistors, Metal Plate Type
– 23 –
Maximum pulse energy respectively pulse power for continuous operation
0.0001 0.001 0.01 0.1 1 10
0.0001
0.001
0.01
0.1
1
10
100
1000
100
10
1
0.1
0.01
0.001
Pulse width (s)
Power (W)
Pulse Energy (J)
ERJMS4S 1 mΩ
ERJMS4H 5 mΩ
ERJMS4H 10 mΩ
0.0001 0.001 0.01 0.1 1 10
0.0001
0.001
0.01
0.1
1
10
100
1000
100
10
1
0.1
0.01
0.001
Pulse width (s)
Power (W)
Pulse Energy (J)
ERJMB1S 5 mΩ
ERJMB1S 3 mΩ
ERJMB1S 1 mΩ
Referance Data
Condition : Room Temperature, OFF : 10 s, 1000 cycle, Wave form : Square
Change of Resistance=±1 %
ERJMS4 Series
ERJMB1 Series
Apr. 201905
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Current Sensing Resistors, Metal Plate Type
– 24 –
0
0
10
20
30
40
50
60
70
80
90
100
123
Temperature Rise (°C)
Power (W)
Temperature Rise (°C)
Power (W)
0
0
10
20
30
40
50
60
70
80
12
Resistor Soldering
PWB
2
1
Sense terminal
Land
<Condition>
Base material : FR-4 (t1.6mm)
Copper Thickness
:
70 μm, Two layer
2
1
ERJMS4 Series
Performance (AEC-Q200)
Temperature Rise
ERJMS4HF5M0U ERJMB1SF3M0U
ERJMB1 Series
Test Item Performance
Requirements Typical value Test Condition
Thermal Shock ±1 % 0.20 % −55 °C/+155 °C, 1000 cycles
Overload ±0.5 % 0.10 % 3 × Rated Power, 5 s
Solderability > 95% coverage > 95% coverage 245 °C, 3 s
Resistance to Solvents No damage No damage MIL-STD-202 method 215, 2.1a, 2.1d
Low Temperature Storage and Operation
±0.5 % 0.03 % −65 °C, 24 h
Resistance to Soldering Heat
±0.5 % 0.10 % MIL-STD-202 method 210 (260 °C, 10 s)
Moisture Resistance ±0.5 % 0.10 % MIL-STD-202 method 106
Shock ±0.5 % 0.10 % MIL-STD-202 method 213-A
Vibration, High Frequency ±0.5 % 0.05 % 10 to 2000 (Hz)
Life ±1 % 0.30 % 70 °C, Rated Power, 2000 h
Storage Life at Elevated Temperature
±1 % 0.30 % 170 °C, 2000 h
High Temperature Characteristics
±0.5 % 0.05 % 140 °C, 2000 h
Frequency Characteristics < 5 nH < 2 nH Inductance
Test Item Performance
Requirements Typical value Test Condition
Thermal Shock ±1 % 0.30 % −55 °C/+155 °C, 1000 cycles
Overload ±1 % 0.30 % 2.5 × Rated Power, 5 s
Solderability > 95% coverage > 95% coverage 245 °C, 3 s
Resistance to Solvents No damage No damage MIL-STD-202 method 215, 2.1a, 2.1d
Low Temperature Storage and Operation
±0.5 % 0.03 % −65 °C, 24 h
Resistance to Soldering Heat
±0.5 % 0.10 % MIL-STD-202 method 210 (260 °C, 10 s)
Moisture Resistance ±0.5 % 0.10 % MIL-STD-202 method 106
Shock ±0.5 % 0.10 % MIL-STD-202 method 213-A
Vibration, High Frequency ±0.5 % 0.05 % 10 to 2000 (Hz)
Life ±1 % 0.30 % 70 °C, Rated Power, 2000 h
Storage Life at Elevated Temperature
±1 % 0.30 % 170 °C, 2000 h
High Temperature Characteristics
±0.5 % 0.05 % 140 °C, 2000 h
Frequency Characteristics < 5 nH < 2 nH Inductance
Sense terminal-Layout
Apr. 201905
Panasonic DDDDDDDDDDD j;
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
High Power Chip Resistors / Wide Terminal Type
– 25 –
E
1
R
2
J
3
A
4
1
5
A
6 7
J
8
1
9
0
10
2
11
U
Thick Film
Chip Resistors
Product Code Size, Power Rating
Code
A1
B1
B2
B3
Resistance Value Region
A
B
C
D
Resistance Value
Packaging Methods
VERJB2
ERJB3
ERJA1
Code Packaging Part No.
Punched Carrier Taping
4 mm pitch, 5,000 pcs.
Embossed Carrier Taping
4 mm pitch, 5,000 pcs.
Embossed Carrier Taping
4 mm pitch, 4,000 pcs.
10 Ω
0.22 Ω
0.01 Ω
0.005 Ω
≤ R
≤ R <10 Ω
≤ R < 0.22 Ω
≤ R < 0.01 Ω
Resistance Tolerance
F
G
J
± 1 %
± 2 %
± 5 %
Shown by 3 digits or letters. Only when it is impossible,
shown by 4 digits or letters.
Power R.
1.33 W
1 W,
2 W
(
R ≤ 10 Ω
)
0.75 W,
1 W
(
R ≤ 10 Ω
)
0.33 W,
0.5 W
(
R ≤ 1 Ω
)
U
ERJB1
(Ex.) 102 : 1.0k Ω
4R7 : 4.7 Ω
R01 : 0.01 Ω = 10m Ω
R015 : 0.015 Ω = 15m Ω
Inch
1225
1020
0612
0508
High Power Chip Resistors /
Wide Terminal Type
Type: ERJ A1, B1, B2, B3
High solder-joint reliability by wide terminal con struc tion
Excellent heat dissipation characteristics by wide terminal construction
AEC-Q200 qualifi ed
RoHS compliant
Automotive electronic circuits including ECUs (Electrical control unit), anti-lock breaking systems and air-bag systems
Current sensing for power supply circuits in a variety of equipment
As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Features
Recommended Applications
Explanation of Part Numbers
Oct. 201707
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
High Power Chip Resistors / Wide Terminal Type
– 26 –
Protective coating
Thick film
resistive element
Electrode (Inner) Electrode (Between)
Electrode (Outer)
Alumina substrate
–60 –40 –20 0 20 40 60 80 100 120 140 160 180
0
20
40
60
80
100 70 °C
155 °C
Ambient Temperature (°C)
Rated Load (%)
–55 °C
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure below.
Construction (Example : ERJA1 type)
Part No.
(inch size)
Power
Rating(3)
at 70 °C
(W)
Limiting
Element
Voltage(1)
(V)
Maximum
Overload
Voltage(2)
(V)
Resistance
Tolerance
(%)
Resistance
Range
(Ω)
T.C.R.
(×10–6/°C)
Category
Temperature
Range
C)
AEC-Q200
Grade
ERJA1
(1225) 1.33 200 400
±1 100m to 10k (E24) ±100
–55 to +155 Grade 0
±2, ±5 10m to 10k (E24)
R < 100m Ω : ±350
100m Ω ≤ R : ±200
ERJB1
(1020)
1
2
(R ≤ 10 Ω)
200 400
±1 10m to 10k (E24)
R < 22m Ω : ±350
22m Ω ≤ R < 47m Ω : ±200
47m Ω ≤ R < 100m Ω :
±
150
100m Ω ≤ R :
±
100
–55 to +155 Grade 0
±2, ±5 10m to 10k (E24)
R < 22m Ω : ±350
22m Ω
R : ±200
ERJB2
(0612)
0.75
1(R ≤ 10 Ω)
200 400
±1 10m to 1M (E24)
R < 22m Ω : 0 to +300
22m Ω
R < 47m Ω : 0 to +200
47m Ω ≤ R < 100m Ω : 0
to
+150
100m Ω ≤ R < 220m Ω : 0
to
+100
220m Ω
R : ±100
–55 to +155 Grade 0
±2 10m to 1M (E24)
R < 22m Ω : 0 to +300
22m Ω
R < 47m Ω : 0 to +200
47m Ω ≤ R < 100m Ω : 0
to
+150
100m Ω ≤ R < 220m Ω : 0
to
+200
220m Ω
R
: ±200
±5
5m, 6m, 7m, 8m, 9m,
10m to 1M (E24)
ERJB3
(0508)
0.33
0.5(R ≤ 1 Ω)
150 200
±1 20m to 10 (E24)
R < 47m Ω : 0 to +300
47m Ω ≤ R < 1 Ω : 0
to
+200
1 Ω
R : ±100
–55 to +155 Grade 0
±2, ±5 20m to 10 (E24)
R < 47m Ω : 0 to +300
47m Ω ≤ R < 1 Ω : 0
to
+200
1 Ω
R : ±200
Ratings
(1)
Rated Continuous Working Voltage (RCWV) shall be de ter mined from RCWV=Power Rating × Re sis tance Values, or Limiting Element Voltage list ed above, whichever less.
(2)
Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) × RCWV or Maximum Overload Voltage listed above, whichever less.
(3) Use it on the condition that the case temperature is below the upper category temperature.
Oct. 201707
Panasonic w w Em mm EEEEEH "'51 *—% T‘ Aq . L -m m _._._4 a g
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
High Power Chip Resistors / Wide Terminal Type
– 27 –
A2
B2 B1
A1
10–fD
B1
L
B2 C
PT
W
1 0 2
l 0 3
b
b
T
W
aa
L
R l 0
bb
T
W
aa
L
bb
T
W
aa
L
bb
T
W
aa
L
RRRRRRRRR R
RR RR R R R
ERJA1 type
Di men sions
(mm)
LWTA
1B1
3.20±0.20 6.40±0.20 0.55±0.10 0.70±0.20 0.45±0.20
Di men sions
(mm)
A2B2P0DC
0.70±0.20 1.25±0.15 1.27±0.10
0.30+0.10 0.4 min.
–0.20
Di men sions
(mm)
LWT a b
1.25±0.10 2.00±0.15 0.50±0.10 0.25±0.20 0.40±0.20
ERJB2 type
Mass (Weight) [1000 pcs.] : 11 g
Di men sions
(mm)
LWT a b
2.50±0.20 5.00±0.20 0.55±0.20 0.25±0.20 0.90±0.20
ERJB3 type ERJB1 type
Mass (Weight) [1000 pcs.] : 27 g
Mass (Weight) [1000 pcs.] : 40 g
( R< 10m Ω ) ( 10m Ω ≤ R ≤ 1M Ω )
Di men sions
(mm) LWT a b
5m Ω ≤R<10m Ω
1.60±0.15 3.20±0.20
0.65±0.15 0.30±0.20 0.30±0.20
10m Ω ≤R<220m Ω
0.55±0.15 0.50±0.20
220m Ω ≤R≤1M Ω
0.25±0.20
Mass (Weight) [1000 pcs.] : 4.8 g
Dimensions in mm (not to scale)
ERJA1 type ERJB1 type ERJB3 type
ERJB2 type
< High resistance zone >< Less than 10m Ω > < Low resistance zone >
Circuit Confi guration
Oct. 201707
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
High Power Chip Resistors / Wide Terminal Type
– 28 –
Test Item Performance
Requirements Test Conditions
Resistance Within Specifi ed
Tolerance 20 °C
T. C. R. Within Specifi ed
T. C. R. +25 °C/+125 °C
Overload ±2%
ERJA1, ERJB1 (R > 10), ERJB3 (R > 1) : Rated Voltage × 2.5, 5 s
ERJB2 (R > 10) : Rated Voltage × 2.2, 5 s
ERJB1 (R ≤ 10), ERJB2 (R ≤ 10), ERJB3 (R ≤ 1) : Rated Voltage × 2.0, 5 s
Resistance to Soldering Heat
±1% 270 °C, 10 s
Rapid Change of
Temperature ±2% –-55 °C (30min.) / +125 °C (30min.), 1000 cycles
High Temperature
Exposure ±1% +155 °C, 1000 h
Damp Heat, Steady State ±1% 60 °C, 90% to 95 %RH, 1000 h
Load Life in Humidity ±3% 60 °C, 90% to 95 %RH, Rated Voltage, 1.5 h ON/0.5 h OFF cycle, 1000 h
Endurance at 70 °C ±3% 70 °C, Rated Voltage, 1.5 h ON/0.5 h OFF cycle, 1000 h
Perfomance
Oct. 201707
Panasonic D DDKDDDDDDD
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Low TCR High Power Chip Resistors / Wide Terminal Type
– 29 –
E
1
R
2
J
3
D
4
1
56
F
7
R
8
0
9
1
10
0
11
U
12
D
Power R.InchCode
D1C
D1D
D2C
D2D
1020
0612
2 W
1 W
Thick Film
Chip Resistors
Product Code
Resistance Value Packaging Methods
Code
U
V
Part No.
ERJD1
ERJD2
Packaging
Embossed Carrier Taping
4 mm pitch, 5,000 pcs.
Resistance
Tolerance
F
J
±1 %
±5 %
Resistance Value Region
22m Ω R ≤ 200m Ω
10m Ω R ≤ 20m Ω
33m Ω R ≤ 200m Ω
10m Ω R ≤ 30m Ω
Shown by 4 digits or letters.
(Ex.) R010 : 0.010 Ω=10m Ω
Punched Carrier Taping
4 mm pitch, 5,000 pcs.
Low TCR High Power Chip Resistors /
Wide Terminal Type
Type: ERJ D1, D2
Achieved High power and low TCR (±100×10–6/°C) using wide terminal electrode structure and original material
Suitable for small size/high power current detection (Low TCR enables high accuracy of current detection)
High solder-joint reliability by wide terminal con struc tion
Excellent heat dissipation characteristics by wide terminal construction
AEC-Q200 qualifi ed
RoHS compliant
Automotive electronic circuits including ECUs (Electrical control unit), anti-lock breaking systems and air-bag systems
Current sensing for power supply circuits in a variety of equipment
As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Features
Recommended Applications
Explanation of Part Numbers
Part No.
(inch size)
Power
Rating(2)
at 70 °C (W)
Resistance
Tolerance
(%)
Resistance
Range
(1)
(Ω)
T.C.R.
(×10–6/°C)
Category
Temperature
Range
C)
AEC-Q200
Grade
ERJD1
(1020) 2 ±1, ±5 10m to 200m (E24) ±100
–55 to +155 Grade 0
ERJD2
(0612) 1 ±1, ±5 10m to 200m (E24) ±100
Ratings
(1) Please contact us when resistors of irregular series are needed.
(2) Use it on the condition that the case temperature is below the upper category temperature.
·
Rated Continuous Working Voltage (RCWV) shall be determined from RCWV = Power Rating × Resistance Values.
· Overload Test Voltage (OTV) shall be determined from OTV = Specified Magnification (refer to performance) × RCWV.
Aug. 201800
Panasonic Eggfil
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Low TCR High Power Chip Resistors / Wide Terminal Type
– 30 –
. 0 l 0
b
b
T
W
aa
L
. 0 l 0
bb
T
W
aa
L
RRRR R
–60 –40 –20 0 20 40 60 80 100 120 140 160 180
0
20
40
60
80
100 70 °C
155 °C
Ambient Temperature (°C)
Rated Load (%)
–55 °C
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure below.
Thick fi lm resistive element
Electrode (Inner)
Electrode (Outer)
Electrode
(Between)
Part No. Di men sions (mm)
LWT a b
ERJD1 2.50±0.20 5.00±0.20 0.60±0.20 0.30±0.20 0.90±0.20
Mass (Weight) [1000 pcs.] : 27 g Mass (Weight) [1000 pcs.] : 11 g
Part No. Di men sions (mm)
LWT a b
ERJD2 1.60±0.15 3.20±0.20 0.65±0.15 0.30±0.20 0.50±0.20
ERJD1 type ERJD2 type
Test Item Performance
Requirements Test Conditions
Resistance Within Specifi ed
Tolerance 20 °C
T. C. R. Within Specifi ed
T. C. R. +25 °C/+125 °C
Overload ±2% Rated Voltage × 2.0, 5 s
Resistance to Soldering
Heat
±1% 270 °C, 10 s
Rapid Change of
Temperature ±2% –-55 °C (30min.) / +125 °C (30min.), 1000 cycles
High Temperature
Exposure ±1% +155 °C, 1000 h
Damp Heat, Steady
State ±1% 60 °C, 90% to 95%RH, 1000 h
Load Life in Humidity ±3% 60 °C, 90% to 95 %RH, Rated Voltage, 1.5 h ON/0.5 h OFF cycle, 1000 h
Endurance at 70 °C ±3% 70 °C, Rated Voltage, 1.5 h ON/0.5 h OFF cycle, 1000 h
Dimensions in mm (not to scale)
Circuit Confi guration
Perfomance
Construction
Alumina
substrate
Protective coating
Aug. 201800
Panasonic .l.“ IDDDIDDDDDDD E—J
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Anti-Surge Thick Film Chip Resistors
– 31 –
E
1
R
2
J
3
P
4
0
5
6
6
D
7
1
8
0
9
0
10
2
11
V
12
Thick Film
Chip Resistors
Product Code Size, Power Rating
Code
PA2
P03
PA3
P06
P08
P14
Power R.
0.20 W
0.20 W
0.25 W
0.50 W
0.66 W
0.50 W
Resistance Tolerance
Code
D
F
J
Tolerance
± 0.5 %
± 1 %
± 5 %
The first two or three digits are significant figures
of resistance and the third or 4th one denotes
number of zeros following.
Three digit type (±5 %),
four digit type (±1 %, ±0.5 %)
Example: 2222.2 kΩ, 100210 kΩ
Resistance Value Packaging Methods
Code
V
U
Part No.
ERJP14
ERJPA2
ERJP03
ERJPA3
ERJP06
ERJP08
Packaging
Punched Carrier Taping
4 mm pitch, 5,000 pcs.
XPunched Carrier Taping
2 mm pitch, 10,000 pcs.
Embossed Carrier Taping
4 mm pitch, 5,000 pcs.
Inch
0402
0603
0603
0805
1206
1210
Anti-Surge Thick Film Chip Re sis tors
Type: ERJ PA2, P03, PA3, P06, P08, P14
ESD surge characteristics superior to standard metal fi lm resistors
High reliability
Metal glaze thick fi lm resistive element and three layers of electrodes
Suitable for both refl ow and fl ow soldering
High power 0.20 W : 0402 inch / 1005 mm size (ERJPA2), 0603 inch / 1608 mm size (ERJP03)
0.25 W : 0603 inch / 1608 mm size (ERJPA3)
0.50 W : 0805 inch / 2012 mm size (ERJP06), 1210 inch / 3225 mm size (ERJP14)
0.66 W : 1206 inch / 3216 mm size (ERJP08)
Reference StandardsIEC 60115-8, JIS C 5201-8, JEITA RC-2134C
AEC-Q200 qualifi ed
RoHS compliant
As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Features
Explanation of Part Numbers
Thick fi lm
resistive element
Electrode (Inner)
Electrode (Outer)
Electrode
(Between)
Alumina substrate
Protective coating
Part No. Dimensions (mm)
Mass (Weight)
[g/1000 pcs.]
LWa b t
ERJPA2 1.00±0.05 0.50±0.05 0.20±0.15 0.25±0.05 0.35±0.05 0.8
ERJP03 1.60±0.15 0.80+0.15 0.15+0.15 0.30±0.15 0.45±0.10 2
ERJPA3 1.60±0.15 0.80+0.15 0.15+0.15 0.25±0.10 0.45±0.10 2
ERJP06 2.00±0.20 1.25±0.10 0.25±0.20 0.40±0.20 0.60±0.10 4
ERJP08 3.20+0.05 1.60+0.05 0.40±0.20 0.50±0.20 0.60±0.10 10
ERJP14 3.20±0.20 2.50±0.20 0.35±0.20 0.50±0.20 0.60±0.10 16
0.20 –0.15
0.05 –0.10
0.05 –0.10
Construction Dimensions in mm (not to scale)
May. 201913
Panasonic ncvwa
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Anti-Surge Thick Film Chip Resistors
– 32 –
–40
–20 0 20 40 60 80 100 120 140 160
0180
–60
70 °C
–55 °C
20
40
60
80
100
Rated Load (%)
Ambient Temperature (°C)
155 °C
125 °C
ERJ P06,
P08
105 °C
ERJ PA2, P03,
P14
ERJ PA3
(1)
Rated Continuous Working Voltage (RCWV) shall be de ter mined from RCWV=Power Rating × Re sis tance Values, or Limiting Element Voltage list ed above, whichever less.
(2)
Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) × RCWV or Maximum Overload Voltage listed above, whichever less.
(3) Use it on the condition that the case temperature is below the upper category temperature.
Power Derating Curve
For resistors operated in rated temperatures above 70 °C
or 105 °C, power rating shall be derated in accordance
with the fi gure on the right.
When the temperature of ERJP14 is 155 °C or less, the
derating start temperature can be changed to 125 °C. (See
the dotted line)
Ratings
Part No.
(inch size)
Power
Rating
(3)
at 70 °C
(W)
Limiting
Element
Voltage(1)
(V)
Maximum
Overload
Voltage(2)
(V)
Resistance
Tolerance
(%)
Resistance
Range
(Ω)
T.C.R.
(×10–6/°C)
Category
Temperature
Range (°C)
AEC-Q200
Grade
ERJPA2
(0402) 0.20 50 100 ±0.5, ±1
10 to 1M (E24, E96)
±100 –55 to +155 Grade 0
±5
10 to 1M (E24)
±200
ERJP03
(0603) 0.20 150 200
±0.5
10 to 1M (E24, E96)
±150
–55 to +155 Grade 0
±1
10 to 1M (E24, E96)
±200
±5
1 to 1M (E24)
R < 10 Ω : –150 to +400
10 Ω R : ±200
ERJPA3
(0603)
0.25
(105 °C) 150 200 ±0.5, ±1
10 to 1M (E24, E96)
±100 –55 to +155 Grade 0
±5
1 to 1.5M (E24)
±200
ERJP06
(0805) 0.50 400 600
±0.5, ±1
10 to 1M (E24, E96)
R < 33 Ω : ±300
33 Ω R : ±100
–55 to +155 Grade 0
±5
1 to 3.3M (E24)
R < 10 Ω : –100 to +600
10 Ω R < 33 Ω :
±300
33 Ω R : ±200
ERJP08
(1206) 0.66 500 1000
±0.5, ±1
10 to 1M (E24, E96)
±100
–55 to +155 Grade 0
±5
1 to 10M (E24)
R < 10 Ω : –100 to +600
10 Ω R : ±200
ERJP14
(1210) 0.50 200 400
±0.5, ±1
10 to 1M (E24, E96)
±100
–55 to +155 Grade 0
±5
1 to 1M (E24)
R < 10 Ω : –100 to +600
10 Ω R : ±200
May. 201913
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Anti-Surge Thick Film Chip Resistors
– 33 –
Change Ratio of
Resistance Value (%)
Change Ratio of
Resistance Value (%)
Change Ratio of
Resistance Value (%)
Change Ratio of
Resistance Value (%)
-30
-25
-15
-10
-5
0
5
-20
-30
-25
-15
-10
-5
0
5
-20
-30
-25
-15
-10
-5
0
5
-20
ERJP03, PA3 (0603 inch /1608 mm size)
ERJP08 (1206 inch / 3216 mm size)ERJP06 (0805 inch / 2012 mm size)
ERJP14 (1210 inch / 3225 mm size)
-30
-25
-15
-10
-5
0
5
-20
ERJ6G
ERJP06
ERJ3G
ERJP14
ERJ14
ERJP08
ERJ8G
ERJP03
ERJPA3
Change Ratio of
Resistance Value (%)
-30
-25
-15
-10
-5
0
5
-20
ERJPA2 (0402 inch /1005 mm size)
ERJ2G
ERJPA2
10 Ω100 Ω1 kΩ10 kΩ100 kΩ1 MΩ
10 Ω100 Ω1 kΩ10 kΩ100 kΩ1 MΩ
10 Ω100 Ω1 kΩ10 kΩ100 kΩ1 MΩ
10 Ω100 Ω1 kΩ10 kΩ100 kΩ1 MΩ
10 Ω100 Ω1 kΩ10 kΩ100 kΩ1 MΩ
R=0 Ω(≤ 1.5 kΩ)/150 Ω(> 1.5 kΩ)
C=15 pF Sample
E
Anti-Surge Thick Film Chip Resistors(ERJP Series)
Thick Film Chip Resistors(ERJ Series)
ESD Characteristic
0402 inch size : E=±1 kV
0603, 0805, 1206, 1210 inch size : E=±3 kV
Test Item Performance Requirements
Test Conditions
Resistance Within Specifi ed Tolerance
20 °C
T. C. R. Within Specifi ed T. C. R. +25 °C/+155 °C (ERJPA2 : +125 °C)
Overload ±2 %
Only when it is ERJP03 (D), P14 (D) : ±0.5 %
ERJP06 : Rated Voltag×1.77, 5 s
ERJPA2, ERJPA3, ERJP08 : Rated Voltag×2.0, 5 s
ERJP03, ERJP14 : Rated Voltag×2.5, 5 s
Resistance to
Soldering Heat D : ±0.5 %, F, J : ±1 % 270 °C, 10 s
Rapid Change of
Temperature ±1 % –55 °C (30min.) / +155 °C (30min.) , 100 cycles
High Temperature
Exposure ±1 % +155 °C, 1000 h
Damp Heat, Steady State
±1 % 60 °C, 90 % to 95 %RH, 1000 h
Load Life in Humidity ±3 %
Only when it is ERJP03 (D), P14 (D) : ±1 %
60 °C, 90 % to 95 %RH,
Rated Voltage, 1.5 h ON / 0.5 h OFF cycle, 1000 h
Endurance at 70 °C
(ERJPA3 : 105 °C)
±3 %
Only when it is ERJP03 (D), P14 (D) : ±1 %
70 °C (ERJPA3 : 105 °C), Rated Voltage,
1.5 h ON / 0.5 h OFF cycle, 1000 h
Performance
May. 201913
Panasonic DICCDIDDCDDD
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Anti-Pulse Thick Film Chip Resistors
– 34 –
E
1
R
2
J
3
T
4
0
5
6
6
J
7
1
8
0
9
0
10 11
V
Thick Film
Chip Resistors
Product Code Size, Power Rating
Code
T06
T08
T14
Power R.
0.25 W
0.33 W
0.5 W
Resistance Tolerance
Code
J
Tolerance
± 5 %
The first two digits are significant figures of resistance
and the third one denotes number of zeros following.
Example: 2222.2 kΩ
Resistance Value
Packaging Methods
Code
V
U
Part No.
ERJT06
ERJT08
ERJT14
Packaging
Punched Carrier Taping
4 mm pitch, 5,000 pcs.
Embossed Carrier Taping
4 mm pitch, 5,000 pcs.
Inch
0805
1206
1210
E
1
R
2
J
3
T
4
1
5
4
6
M
7
1
8
0
9
0
10 11
U
Thick Film
Chip Resistors
Product Code Size, Power Rating
Code
T14
Power R.
0.5 W
Resistance Tolerance
Code
K
M
Tolerance
±10 %
±20 %
Product specifications
Code
L
Specifications
Trimming-less
The first two digits are significant figures of resistance
and the third one denotes number of zeros following.
Example: 2222.2 kΩ
Resistance Value
Packaging Methods
Code
U
Part No.
ERJT14L
Packaging
Embossed Carrier Taping
4 mm pitch, 5,000 pcs.
Inch
1210
L
7
Please contact us for 2012 (mm) and 3216 (mm) size trimming-less types.
Anti-Pulse
Thick Film Chip Re sis tors
Type: ERJ T06, T08, T14
ERJ T14L
Explanation of Part Numbers
Features
Anti-Pulse characteristics
High pulse characteristics achieved by the optimized trimming specifi cations (ERJT06, T08, T14)
Further high pulse characteristics achieved by trimming-less specifi cations (ERJT14L)
High reliability
Metal glaze thick fi lm resistive element and three layers of electrodes
Suitable for both refl ow and fl ow soldering
High power 0.25W : 0805 inch / 2012 mm size (ERJT06)
0.33W : 1206 inch / 3216 mm size (ERJT08)
0.50W : 1210 inch / 3225 mm size (ERJT14, ERJT14L)
Reference StandardsIEC 60115-8, JIS C 5201-8, JEITA RC-2134C
AEC-Q200 qualifi ed
RoHS compliant
ERJT06, T08, T14 Series
ERJT14L Series
As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Feb. 201907
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Anti-Pulse Thick Film Chip Resistors
– 35 –
–40
–20 0 20 40 60 80 100 120 140 160
0180
–60
70 °C
–55 °C
20
40
60
80
100
Rated Load (%)
Ambient Temperature (°C)
155 °C
a
b
t
W
L
Ratings
Part No.
(inch size)
Power
Rating
e
(3)
at 70 °C
(W)
Limiting
Element
Voltage
(1)
(V)
Maximum
Overload
Voltage
(2)
(V)
Resistance
Tolerance
(%)
Resistance
Range
(Ω)
T.C.R.
(×10–6/°C)
Category
Temperature
Range
(°C)
AEC-Q200
Grade
ERJT06
(0805) 0.25 150 200 ±5 1 to 1M
(E24)
R <10 Ω : –100 to +600
10 Ω ≤ R < 33 Ω : ±300
33 Ω ≤ R : ±200
–55 to +155 Grade 0
ERJT08
(1206) 0.33 200 400 ±5 1 to 1M
(E24)
R <10 Ω : –100 to +600
10 Ω ≤ R : ±200
–55 to +155 Grade 0
ERJT14
(1210) 0.50 200 400 ±5 1 to 1M
(E24)
R <10 Ω : –100 to +600
10 Ω ≤ R : ±200
–55 to +155 Grade 0
ERJT14L
(1210) 0.50 200 400 ±10
±20
1 to 1M
(E12)
R <10 Ω : –100 to +600
10 Ω ≤ R : ±200
–55 to +155 Grade 0
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
Thick fi lm
resistive element
Electrode (Inner)
Electrode (Outer)
Electrode
(Between)
Alumina substrate
Protective coating
Part No. Dimensions (mm)
Mass (Weight)
[g/1000 pcs.]
LWa b t
ERJT06 2.00±0.20 1.25±0.10 0.25±0.20 0.40±0.20 0.60±0.10 4
ERJT08 3.20+0.05 1.60+0.05 0.40±0.20 0.50±0.20 0.60±0.10 10
ERJT14
ERJT14L 3.20±0.20 2.50±0.20 0.35±0.20 0.50±0.20 0.60±0.10 16
–0.15
–0.20
Construction Dimensions in mm (not to scale)
(1)
Rated Continuous Working Voltage (RCWV) shall be de ter mined from RCWV=Power Rating × Re sis tance Values, or Limiting Element Voltage list ed above, whichever less.
(2)
Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) × RCWV or Maximum Overload Voltage listed above, whichever less.
(3) Use it on the condition that the case temperature is below the upper category temperature.
Feb. 201907
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Anti-Pulse Thick Film Chip Resistors
– 36 –
Pulse duration t (msec)
Limiting Power : Pp (W)
Pulse duration t (msec) Pulse duration t (msec)
Limiting Power : Pp (W)
Limiting Power : Pp (W)
1
10
100
1 10 100 1000 1
10
100
1 10 100 1000 1
10
100
1000
1 10 100 1000
Please contact us for 2012 (mm) and 3216 (mm) size trimming-less types.
Period time : 10 s
Pulse duration : t
0
Pp
Limiting
Power
: Anti-Pulse Thick Film Chip Resistors (ERJT14L Series)
: Anti-Pulse Thick Film Chip Resistors (ERJT Series)
: Thick Film Chip Resistors (ERJ Series : 1 Ω)
In rush pulse Characteristic
ERJT06 (0805 inch/2012 mm size) ERJT08 (1206 inch/3216 mm size)
ERJT14,ERJT14L (1210 inch/3225 mm size)
Test cycle : 1000 cycles
Spec : Resistance value = within ±5%
Limiting Power Curve
Test Item Performance
Requirements Test Conditions
Resistance Within Specifi ed
Tolerance 20 °C
T. C. R. Within Specifi ed
T. C. R. +25 °C/+155 °C
Overload ±2 % Rated Voltage × 2.5, 5 s
Resistance to Soldering Heat
±1 % 270 °C±3 °C, 10 s±1 s
Rapid Change of
Temperature ±1 % –55 °C (30min.) / +155 °C (30min.), 100 cycles
High Temperature
Exposure ±1 % +155 °C , 1000 h
Damp Heat, Steady State ±1 % 60 °C±2 °C, 90 % to 95 %RH, 1000 h
Load Life in Humidity ±3 % 60 °C±2 °C, 90 % to 95 %RH, Rated Voltage,
1.5 h ON / 0.5 h OFF cycle, 1000 h
Endurance at 70 °C ±3 % 70 °C±2 °C, Rated Voltage, 1.5 h ON / 0.5 h OFF cycle, 1000 h
Perfomance
Feb. 201907
Panasonic IKCCDDDD DD 7 ‘L‘
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Anti-Sulfurated Thick Film Chip Resistors
– 37 –
E
1
R
2
J
3
S
4
0
5
6
6
F
7
1
8
0
9
0
10
2
11
V
12
Thick Film Chip Resistors
Product Code
Size, Power Rating
InchCode
U01
S02
U02
S03
U03
S06
U06
S08
U08
0.05 W
0.1 W
0.1 W
0.125 W
0.25 W
0201
0402
0603
0805
1206
1210
1812
2010
2512
Power R.
Resistance Tolerance
Code
D
F
Tolerance
± 0.5 %
± 1 %
Code
J
0
Tolerance
± 5 %
Jumper
The first two or three digits are significant figures of
resistance and the third or 4th one denotes number
of zeros following. Jumper is expressed by R00.
Three digit type (±5 %), four digit type (±0.5 %, ±1 %)
Example: 2222.2 kΩ, 100210kΩ
Resistance Value
Code Inch
S14
U14
S12
U12
S1D
U1D
S1T
U1T
0.5 W
0.75 W
0.75 W
1 W
Power R.
Packaging Methods
Code
Packaging Part No.
Pressed Carrier Taping
2 mm pitch, 15,000 pcs.
ERJU01
Embossed Carrier Taping
4 mm pitch, 4,000 pcs.
Embossed Carrier Taping
4 mm pitch, 5,000 pcs.
ERJS1T, ERJU1T
ERJS03, ERJU03
ERJS06, ERJU06
ERJS08, ERJU08
ERJS14, ERJU14
ERJS12, ERJU12
ERJS1D, ERJU1D
ERJS02, ERJU02
C
Punched Carrier Taping
2 mm pitch, 10,000 pcs.
X
Punched Carrier Taping
4 mm pitch, 5,000 pcs.
V
U
6SJR20V
E
1
R
2
J
3
U
4567891011
Code
U6 0.25 W
Power R. Code
S
Q
Resistance Value
0.1 Ω to 0.2 Ω
0.22 Ω to 1 Ω
Resistance Tolerance
Code
F
G
J
Tolerance
±1 %
±2 %
±5 %
Packaging Methods
Code
Part No.
Packaging
Shown by 3 digits or
letters.
(Example)
R20 : 0.20 Ω=200 mΩ
1R0 : 1.0 Ω=1000 mΩ
Resistance Value
ERJU6S
ERJU6Q
Res. Value
Punched Carrier Taping
4 mm pitch, 5,000 pcs.
V
Thick Film Chip Resistors
Product Code
Size, Power Rating
Inch
0805
Anti-Sulfurated
Thick Film Chip Resistors
Type: ERJ S02, S03, S06, S08, S14, S12, S1D, S1T
(Au-based inner electrode type)
Type: ERJ U01, U02, U03, U06, U08, U14, U12,
U1D, U1T, U6S, U6Q
(Ag-Pd-based inner electrode type)
Explanation of Part Numbers
Features
High resistance to sulfurization achieved by adopting an Au-based inner electrode (ERJS Series)
and Ag-Pd-based inner electrode (ERJU Series)
High reliability
Metal glaze thick fi lm resistive element and three layers of electrodes
Suitable for both refl ow and fl ow soldering
Low Resistance type ERJU6S, U6Q : 0.1 Ω to 1.0 Ω
Reference Standard IEC 60115-8, JIS C 5201-8, JEITA RC-2134C
AEC-Q200 qualifi ed (Exemption ERJU01)
RoHS compliant
As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
ERJU01 to ERJU1T, ERJS02 to ERJS1T Series
ERJU6S, U6Q Series
Mar. 201911
Panasonic — i
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Anti-Sulfurated Thick Film Chip Resistors
– 38 –
a
b
t
W
L
Ratings
(1)
Rated Continuous Working Voltage (RCWV) shall be de ter mined from RCWV=Power Rating × Re sis tance Values, or Limiting Element Voltage list ed above, whichever less.
(2)
Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) × RCWV or Maximum Overload Voltage listed above, whichever less.
(3) Use it on the condition that the case temperature is below the upper category temperature.
(1) Use it on the condition that the case temperature is below the upper category temperature.
·
Rated Continuous Working Voltage (RCWV) shall be determined from RCWV = Power Rating × Resistance Values.
· Overload Test Voltage (OTV) shall be determined from OTV = Specified Magnification (refer to performance) × RCWV.
Part No.
(inch size)
Power
Rating (3)
at 70 °C
(W)
Limiting
Element
Voltage(1)
(V)
Maximum
Overload
Voltage(2)
(V)
Resistance
Tolerance
(%)
Resistance
Range
(Ω)
T.C.R.
(×10-6/°C )
Category
Temperature
Range
(°C)
AEC-Q200
Grade
ERJU01
(0201) 0.05 25 50 ±1 10 to 1M (E24, E96)
<10 Ω:
–100 to +600
10 Ω to 1 MΩ:
±200(±5 %)
±100(±0.5, ±1 %)
ERJU01,
ERJS02,
ERJU02 :
±200
1 MΩ<:
–400 to +150
–55 to +125
±5 1 to 1M (E24)
ERJS02
ERJU02
(0402) 0.1 50 100 ±0.5, ±1 1 to 1M (E24, E96) –55 to +155 Grade 0
±5 1 to 3.3M (E24)
ERJS03
ERJU03
(0603) 0.1 75 150 ±0.5, ±1 1 to 1M (E24, E96) –55 to +155 Grade 0
±5 1 to 10M (E24)
ERJS06
ERJU06
(0805) 0.125 150 200 ±0.5, ±1 1 to 1M (E24, E96) –55 to +155 Grade 0
±5 1 to 10M (E24)
ERJS08
ERJU08
(1206) 0.25 200 400 ±0.5, ±1 1 to 1M (E24, E96) –55 to +155 Grade 0
±5 1 to 10M (E24)
ERJS14
ERJU14
(1210)
0.5 200 400 ±0.5, ±1 1 to 1M (E24, E96) –55 to +155 Grade 0
±5 1 to 10M (E24)
ERJS12
ERJU12
(1812)
0.75 200 500 ±0.5, ±1 1 to 1M (E24, E96) –55 to +155 Grade 0
±5 1 to 10M (E24)
ERJS1D
ERJU1D
(2010)
0.75 200 500 ±0.5, ±1 1 to 1M (E24, E96) –55 to +155 Grade 0
±5 1 to 10M (E24)
ERJS1T
ERJU1T
(2512)
1.0 200 500
±0.5, ±1 1 to 1M (E24, E96)
–55 to +155 Grade 0
±5 1 to 10M (E24)
Thick fi lm
resistive element
Electrode (Inner)
Au-based :
ERJS type
Ag-Pd-based:
ERJU type
Electrode (Outer)
Electrode
(Between)
Alumina substrate
Protective coating
Part No. Dimensions (mm)
Mass (Weight)
[g/1000 pcs.]
LWa b t
ERJU01 0.60±0.03 0.30±0.03 0.10±0.05 0.15±0.05 0.23±0.03 0.15
ERJS02
ERJU02 1.00±0.05 0.50±0.05 0.20±0.10 0.25±0.10 0.35±0.05 0.8
ERJS03
ERJU03 1.60±0.15 0.80+0.15 0.30±0.20 0.30±0.15 0.45±0.10 2
ERJS06
ERJU06 2.00±0.20 1.25±0.10 0.40±0.20 0.40±0.20 0.60±0.10 4
ERJU62.00±0.20 1.25±0.10 0.45±0.20 0.45±0.20 0.55±0.10 6
ERJS08
ERJU08 3.20+0.05 1.60+0.05 0.50±0.20 0.50±0.20 0.60±0.10 10
ERJS14
ERJU14 3.20±0.20 2.50±0.20 0.50±0.20 0.50±0.20 0.60±0.10 16
ERJS12
ERJU12 4.50±0.20 3.20±0.20 0.50±0.20 0.50±0.20 0.60±0.10 27
ERJS1D
ERJU1D 5.00±0.20 2.50±0.20 0.60±0.20 0.60±0.20 0.60±0.10 27
ERJS1T
ERJU1T 6.40±0.20 3.20±0.20 0.65±0.20 0.60±0.20 0.60±0.10
45
–0.05
–0.15–0.20
[Low Resistance type]
Part No.
(inch size)
PowerRating
(1)
at 70 °C
(W)
Resistance
Tolerance
(%)
Resistance
Range
(Ω)
T.C.R.
(×10-6/°C )
Category
Temperature
Range
(°C)
AEC-Q200
Grade
ERJU6S (0805) 0.25 ±1, ±2, ±5 0.1 to 0.2 (E24) ±150 –55 to +155 Grade 0
ERJU6Q (0805) 0.22 to 1 (E24)
Construction Dimensions in mm (not to scale)
Mar. 201911
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Anti-Sulfurated Thick Film Chip Resistors
– 39 –
–40 –20 0 20 40 60 80 100 120 140 160
0180–60
70 °C
Ambient Temperature (°C)
20
40
60
80
100
Rated Load (%)
–55 °C
125 °C
ERJU01
155 °C
[For Jumper]
Part No.
(inch size)
Rated Current
(A)
Maximum Overload Current (1)
(A)
ERJU01
(0201) 0.5 1
ERJS02
ERJU02
(0402) 12
ERJS03
ERJU03
(0603)
ERJS06
ERJU06
(0805)
24
ERJS08
ERJU08
(1206)
ERJS14
ERJU14
(1210)
ERJS12
ERJU12
(1812)
ERJS1D
ERJU1D
(2012)
ERJS1T
ERJU1T
(2512)
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure below.
Test Item Performance Requirements Test Conditions
Resistor type Jumper type
Resistance Within Specifi ed
Tolerance 100 mΩ or less 20 °C
T. C. R. Within Specifi ed
T. C. R. 200 mΩ or less +25 °C/+155 °C (ERJU01 : +25 °C/+125 °C)
Overload ±2 % 100 mΩ or less Rated Voltage × 2.5, 5 s
Jumper type : Max. Overload Current, 5 s
Resistance to
Soldering Heat ±1 % 100 mΩ or less 270 °C, 10 s
Rapid Change of
Temperature ±1 % 100 mΩ or less –55 °C (30min.) / +155 °C (ERJU01: +125 °C) (30min.),
100 cycles
High Temperature
Exposure ±1 % 100 mΩ or less +155 °C (ERJU01 : +125 °C), 1000 h
Damp Heat, Steady State
±1 % 100 mΩ or less 60 °C, 90 % to 95 %RH, 1000 h
Load Life in Humidity ±3 % 100 mΩ or less 60 °C, 90 % to 95 %RH, Rated Voltage (Jumper type :
Rated Current), 1.5 h ON/0.5 h OFF cycle, 1000 h
Endurance at 70 °C ±3 % 100 mΩ or less 70 °C, Rated Voltage (Jumper type : Rated Current),
1.5 h ON/0.5 h OFF cycle, 1000 h
Test Item Performance
Requirements Test Conditions
Resistance Within Specifi ed
Tolerance 20 °C
T. C. R. Within Specifi ed
T. C. R. +25 °C/+125 °C
Overload ±1 % Rated Voltage × 2.5, 5 s
Resistance to Soldering Heat ±1 % 270 °C, 10 s
Rapid Change of Temperature ±1 % –55 °C (30min.) / +125 °C (30min.), 100 cycles
High Temperature Exposure ±1 % +155 °C, 1000 h
Damp Heat, Steady State
±1 % 60 °C, 90 % to 95 %RH, 1000 h
Load Life in Humidity ±3 % 60 °C, 90 % to 95 %RH, Rated Voltage,
1.5 h ON/0.5 h OFF cycle, 1000 h
Endurance at 70 °C ±3 % 70 °C, Rated Voltage, 1.5 h ON/0.5 h OFF cycle, 1000 h
ERJU01 to ERJU1T, ERJS02 to ERJS1T Series
ERJU6S, U6Q Series
Performance
(1) Overload test current
Mar. 201911
Panasonic ul- — — EDDIIDDDDCDD E \# H — —
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Anti-Sulfurated Thick Film Chip Resistors / Anti-Surge Type
– 40 –
a
b
t
W
L
E
1
R
2
J
3
U
4
P
5
6
6
D
7
1
8
0
9
0
10
2
11
V
12
Thick Film
Chip Resistors
Product Code Size, Power Rating
Code
UP3
UP6
UP8
Under development
Power R.
0.25 W
0.50 W
0.66 W
Resistance Tolerance
Code
D
F
J
Tolerance
± 0.5 %
± 1 %
± 5 %
The first two or three digits are significant figures
of resistance and the third or 4th one denotes
number of zeros following.
Three digit type (±5 %),
four digit type (±1 %, ±0.5 %)
Example: 2222.2k Ω, 100210k Ω
Resistance Value Packaging Methods
Code Part No.
ERJUP3
ERJUP6
ERJUP8
Packaging
VPunched Carrier Taping
4 mm pitch, 5,000 pcs.
Inch
0603
0805
1206
Thick fi lm
resistive element
Anti-Sulfurated
electrode (Inner)
Electrode (Outer)
Electrode
(Between)
Alumina substrate
Protective coating
Anti-Sulfurated Thick Film Chip Resistors /
Anti-Surge Type
Type: ERJ UP3, UP6, UP8
High resistance to sulfurization achieved by adopting Anti-Sulfurated electrode structure and material
ESD surge characteristics superior to standard metal fi lm resistors
High reliability
Metal glaze thick fi lm resistive element and three layers of electrodes
Suitable for both refl ow and fl ow soldering
High power 0.25 W : 0603 inch / 1608 mm size (ERJUP3)
0.50 W : 0805 inch / 2012 mm size (ERJUP6)
0.66 W : 1206 inch / 3216 mm size (ERJUP8)
Reference StandardsIEC 60115-8, JIS C 5201-8, EIAJ RC-2134B
AEC-Q200 qualifi ed
RoHS compliant
As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Features
Construction Dimensions in mm (not to scale)
Explanation of Part Numbers
Part No.
Dimensions (mm)
Mass (Weight)
[g/1000 pcs.]
LWa b t
ERJUP3 1.60±0.15 0.80+0.15 0.15+0.15 0.25±0.10 0.45±0.10 2
ERJUP6 2.00±0.20 1.25±0.10 0.25±0.20 0.40±0.20 0.60±0.10 4
ERJUP8 3.20+0.05 1.60+0.05 0.40±0.20 0.50±0.20 0.60±0.10 10
–0.20 –0.15
–0.05 –0.10
Nov. 201701
Panasonic RCVW=V
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Anti-Sulfurated Thick Film Chip Resistors / Anti-Surge Type
– 41 –
–60 –40 –20 0 20 40 60 80 100 120 140 160 180
0
20
40
60
80
100
155 °C
Ambient Temperature (°C)
Rated Load (%)
–55 °C 70 °C
125 °C
50 %
ERJUP6, UP8
ERJUP3
10 Ω
-30%
-25%
-15%
Change Ratio of
Resistance Value
-10%
-5%
0%
5%
-20%
100 Ω1k Ω10k Ω100k Ω1M Ω
ERJUP8 (1206 inch / 3216 mm size)
ERJUP8
ERJU08
Change Ratio of
Resistance Value
Change Ratio of
Resistance Value
10 Ω
-30%
-25%
-15%
-10%
-5%
0%
5%
-20%
100 Ω
ERJUP3 (0603 inch / 1608 mm size)
1k Ω10k Ω100k Ω1M Ω
ERJU03
ERJUP3
ERJUP6 (0805 inch / 2012 mm size)
10 Ω
-30%
-25%
-15%
-10%
-5%
0%
5%
-20%
100 Ω1k Ω10k Ω100k Ω1M Ω
ERJU06
ERJUP6
(1)
Rated Continuous Working Voltage (RCWV) shall be de ter mined from RCWV=Power Rating × Re sis tance Values, or Limiting Element Voltage list ed above, whichever less.
(2)
Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) × RCWV or Maximum Overload Voltage listed above, whichever less.
(3) Use it on the condition that the case temperature is below the upper category temperature.
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance with
the fi gure on the right.
Anti-Sulfurated Thick Film Chip Resistors / Anti-Surge Type
(ERJUP Type)
Anti-Sulfurated Thick Film Chip Resistors (ERJU Type)
E=±3k V
Ratings
R=0 Ω(≤ 1.5k Ω)/150 Ω(> 1.5k Ω)
C=150p F Sample
E
ESD Characteristic
Part No.
(inch size)
Power
Rating
(3)
at 70 °C
(W)
Limiting
Element
Voltage(1)
(V)
Maximum
Overload
Voltage(2)
(V)
Resistance
Tolerance
(%)
Resistance
Range
(Ω)
T.C.R.
(×10–6/°C)
Category
Temperature
Range (°C)
AEC-Q200
Grade
ERJUP3
(0603) 0.25 150 200 ±0.5, ±1
10 to 1M (E24, E96)
±100 –55 to +155 Grade 0
±5
1 to 1.5M (E24)
±200
ERJUP6
(0805) 0.50 400 600
±0.5, ±1
10 to 1M (E24, E96)
±100
–55 to +155 Grade 0
±5
1 to 3.3M (E24)
R < 10 Ω : –100 to +600
10 Ω R : ±200
ERJUP8
(1206) 0.66 500 1000
±0.5, ±1
10 to 1M (E24, E96)
±100
–55 to +155 Grade 0
±5
1 to 10M (E24)
R < 10 Ω : –100 to +600
10 Ω R : ±200
Nov. 201701
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Anti-Sulfurated Thick Film Chip Resistors / Anti-Surge Type
– 42 –
Test Item Performance Requirements Test Conditions
Resistance Within Specifi ed Tolerance 20 °C
T. C. R. Within Specifi ed T. C. R. +25 °C/+155 °C
Overload ±2% ERJUP6 : Rated Voltage × 1.77, 5 s
ERJUP3, ERJUP8 : Rated Voltage × 2.0, 5 s
Resistance to Soldering Heat
D±0.5%
F, J ±1% 270 °C, 10 s
Rapid Change of
Temperature ±1% –55 °C (30 min.) / +155 °C (30 min.)
100 cycles
High Temperature Exposure ±1% +155 °C, 1000 h
Damp Heat, Steady State ±1% 60 °C, 90% to 95%RH, 1000 h
Load Life in Humidity ±3%60 °C, 90% to 95%RH,
Rated Voltage, 1.5 h ON / 0.5 h OFF cycle, 1000 h
Endurance at 70 °C ±3% 70 °C, Rated Voltage, 1.5 h ON / 0.5 h OFF cycle, 1000 h
Performance
Nov. 201701
Panasonic H DIDDDDIDDDD
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Anti-Sulfurated High Power Chip Resistors / Wide Terminal Type
– 43 –
R 0 1
b
b
T
W
aa
L
1234567891011
Thick Film
Chip Resistors
Product Code Size, Power Rating
Code
C1
Resistance Value Region
B
C
Resistance Value
Packaging Methods
U
Code Packaging Part No.
Embossed Carrier Taping
4 mm pitch, 5,000 pcs.
220m Ω R ≤ 1 Ω
10m Ω R < 220m Ω
Resistance Tolerance
F
J
± 1 %
± 5 %
Shown by 3 digits or letters. Only when it is impossible,
shown by 4 digits or letters.
Power R.
2 W ERJC1
(ex.) R01 : 0.01 Ω = 10m Ω R015 : 0.015 Ω = 15m Ω
E R J C 1FR10UC
Inch
1020
Anti-Sulfurated High Power Chip Resistors /
Wide Terminal Type
Type: ERJ C1
Explanation of Part Numbers
Features
Recommended Applications
High resistance to sulfurization achieved by adopting Anti-Sulfurated electrode structure and material
High solder-joint reliability by wide terminal con struc tion
Excellent heat dissipation characteristics by wide terminal construction
AEC-Q200 qualifi ed
RoHS compliant
Motor control circuit of the industrial equipment
Automotive electronic circuits including ECUs (Electrical control unit), anti-lock breaking systems and air-bag systems
Current sensing for power supply circuits in a variety of equipment
As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Part No. Di men sions (mm) Mass
(Weight)
[g/1000 pcs.]
LWT a b
ERJC1B
2.50±0.20 5.00±0.20 0.55±0.20 0.35±0.20 0.90±0.20
27
ERJC1C
0.60±0.20
Alumina substrate
Thick fi lm
resistive element
Electrode (Inner)
Ag-Pd-based :
ERJC1B type
Covered Electrode :
ERJC1C type
Electrode (Outer)
Electrode
(Between)
Protective coating
Construction Dimensions in mm (not to scale)
Nov. 201705
Panasonic — [E] Dry temperature VP x
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Anti-Sulfurated High Power Chip Resistors / Wide Terminal Type
– 44 –
RRR
–60 –40 –20 0 20 40 60 80 100 120 140 160 180
0
20
40
60
80
100 70 °C
155 °C
Ambient Temperature (°C)
Rated Load (%)
–55 °C
Ratings
Circuit Confi guration
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
Type ERJC1
Part No.
(inch size)
Power Rating
at 70 °C (1)
(W)
Resistance
Tolerance (%)
Resistance
Range
(Ω)
T.C.R.
(×10-6/°C )
Category
Temperature
Range
(°C)
AEC-Q200
Grade
ERJC1
(1020) 2
±1
10m to 1
(E24)
10m Ω ≤ R < 22m Ω : ±350
22m Ω ≤ R < 47m Ω : ±200
47m Ω ≤ R < 100m Ω : ±150
100m Ω ≤ R ≤ 1 Ω : ±100 –55 to +155 Grade 0
±5 10m Ω ≤ R < 22m Ω : ±350
22m Ω ≤ R < 1 Ω : ±200
(1) Use it on the condition that the case temperature is below the upper category temperature.
·
Rated Continuous Working Voltage (RCWV) shall be determined from RCWV = Power Rating × Resistance Values.
· Overload Test Voltage (OTV) shall be determined from OTV = Specified Magnification (refer to performance) × RCWV.
Test Item Performance
Requirements Test Conditions
Resistance Within Specifi ed
Tolerance 20 °C
T. C. R. Within Specifi ed
T. C. R. +25 °C/+125 °C
Overload ±2% Rated Voltage × 2.0, 5 s
Resistance to Soldering Heat
±1% 270 °C, 10 s
Rapid Change of
Temperature ±2% –55 °C (30min.) / +125 °C (30min.), 1000 cycles
High Temperature
Exposure ±1% +155 °C, 1000 h
Damp Heat, Steady State ±1% 60 °C, 90% to 95 %RH, 1000 h
Load Life in Humidity ±3% 60 °C, 90% to 95 %RH, Rated Voltage,
1.5 h ON/0.5 h OFF cycle, 1000 h
Endurance at 70 °C ±3% 70 °C, Rated Voltage, 1.5 h ON/0.5 h OFF cycle, 1000 h
Perfomance
Nov. 201705
Panasonic 7\[ I‘ '1“
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Chip Resistor Array
– 45 –
E
1
X
2
B
3
V
4
8
5
V
6
4
7
7
8
2
9
J
10
V
11
Thick Film
Chip Resistor
Networks
Product Code Schematics
VIsolated
type
The first two digits are
significant figures of
resistance value and
the third one denotes
the number of zeros
following. Jumper is
expressed by R00
Resistance Value
Example : 222 2.2k Ω
Resistance
Tolerance
J
0
±5 %
Jumper
Packaging Methods
Code
Nil
X
V
Packaging Part No.
Embossed Carrier Taping
4 mm pitch, 2,500 pcs.
Punched Carrier Taping
2 mm pitch, 10,000 pcs.
Punched Carrier Taping
4 mm pitch, 5,000 pcs.
EXBS8V
EXB14V, 18V,
24V, 28V, N8V
EXB2HV, 34V,
38V, V4V, V8V
0201×2
0201×4
0402×2
0402×4
0602×8
0603×2
0603×4
0402×4
0603×2
0603×4
0805×4
14
18
24
28
2H
34
38
N8
V4
V8
S8
Convex Terminal
Flat Terminal
Convex Terminal
Convex Terminal
Convex Terminal
Convex Terminal
Convex Terminal
Concave Terminal
Concave Terminal
Concave Terminal
Concave Terminal
Code ConstructionInch
4
1
3
2
8
1
7
2
6
3
5
4
16
1
15
2
14
3
13
4
12
5
11
6
10
7
9
8
Protective coating
Thick film
resistive element
Electrode (Inner)
Electrode (Between)
Electrode (Outer)
Alumina substrate
Chip Resistor Array
Type: EXB 14V, 18V, 24V, 28V,
N8V, 2HV, 34V, V4V,
38V, V8V, S8V
As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Isolated type
High density
2 resistors in 0.8 mm × 0.6 mm size / 0302 inch size : EXB14V
4 resistors in 1.4 mm × 0.6 mm size / 0502 inch size : EXB18V
2 resistors in 1.0 mm × 1.0 mm size / 0404 inch size : EXB24V
4 resistors in 2.0 mm × 1.0 mm size / 0804 inch size : EXB28V, EXBN8V
8 resistors in 3.8 mm × 1.6 mm size / 1506 inch size : EXB2HV
2 resistors in 1.6 mm × 1.6 mm size / 0606 inch size : EXB34V, EXBV4V
4 resistors in 3.2 mm × 1.6 mm size / 1206 inch size : EXB38V, EXBV8V
4 resistors in 5.1 mm × 2.2 mm size / 2009 inch size : EXBS8V
Improvement of placement ef ciency
Placement ef ciency of Chip Resistor Array is two, four or eight times of the fl at type chip resistor
Reference Standard…IEC 60115-9, JIS C 5201-9, EIAJ RC-2129
AEC-Q200 qualifi ed (EXB2, EXB3)
RoHS compliant
14V, 24V,
34V, V4V
18V, 28V, N8V,
38V, V8V, S8V
2HV
2 resistors 4 resistors 8 resistors
Schematics
Construction (Example : Concave Terminal)
Features
Explanation of Part Numbers
Feb. 201805
Panasonic RC\‘W=\
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Chip Resistor Array
– 46 –
–60 –40 –20 0 20 40 60 80 100 120 140 160 180
0
20
40
60
80
100 70 °C–55 °C
125 °C
Ambient Temperature (°C)
Rated Load (%)
Part No.
(inch size)
Power Rating
at 70 °C
(W / element)
Limiting Element
Voltage
(1)
(V)
Maximum Overload
Voltage
(2)
(V)
Resistance
Tolerance
(%)
Resistance
Range
(Ω)
T.C.R.
(×10–6/°C)
Category
Temperature Range
(°C)
AEC-Q200
Grade
EXB14V
(0201×2) 0.031 12.5 25 ±5 10 to 1M (E24)
<10 Ω :
–200 to +600
10 Ω to1M Ω :
±200
–55 to +125
EXB18V
(0201×2)
0.031
(0.1 W / package)
12.5 25 ±5 10 to 1M (E24) –55 to +125
EXB24V
(0402×2) 0.063 50 100 ±5 1 to 1M (E24) –55 to +125 Grade 1
EXB28V
(0402×4) 0.063 50 100 ±5 1 to 1M (E24) –55 to +125 Grade 1
EXB2HV
(0602×8)
0.063
(0.25 W / package)
25 50 ±5 10 to 1M (E24) –55 to +125 Grade 1
EXB34V
(0603×2) 0.063 50 100 ±5 1 to 1M (E24) –55 to +125 Grade 1
EXB38V
(0603×4) 0.063 50 100 ±5 1 to 1M (E24) –55 to +125 Grade 1
EXBN8V
(0402×4) 0.031 50 100 ±5 10 to 1M (E24) –55 to +125
EXBV4V
(0603×2) 0.063 50 100 ±5 10 to 1M (E24) –55 to +125
EXBV8V
(0603×4) 0.063 50 100 ±5 10 to 1M (E24) –55 to +125
EXBS8V
(0805×4) 0.1 100 200 ±5 10 to 1M (E24) –55 to +125
Ratings
Part No.
(inch size)
Rated Current
(A / element)
Maximum Over load Current (1)
(A)
EXB14V
(0201×2) 0.5 1
EXB18V
(0201×4) 0.5 1
EXB24V
(0402×2) 12
EXB28V
(0402×4) 12
EXB2HV
(0602×8) 12
EXB34V
(0603×2) 12
EXB38V
(0603×4) 12
EXBN8V
(0402×4) 12
EXBV4V
(0603×2) 12
EXBV8V
(0603×4) 12
EXBS8V
(0805×4) 24
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure below.
(1) Overload test current
(1)
Rated Continuous Working Voltage (RCWV) shall be de ter mined from RCWV=Power Rating × Re sis tance Values, or Limiting Element Voltage list ed above, whichever less.
(2)
Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) × RCWV or Maximum Overload Voltage listed above, whichever less.
[For Jumper]
[For Resistor]
Feb. 201805
mm Panasonic AJHLHJLI
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Chip Resistor Array
– 47 –
PP
LL
GG
G
W
G
BB
W
BB
A1 A1 A2
EXBV4V EXBN8V, V8V, S8V
TT
PLT
G
W
G
BB
A1 A2 EXB18V
A1
PTP
L
T
L
BB
G
BB
GG
W
W
G
A1 A2
EXB14V, 24V, 34V EXB28V, 38V
PT
L
G
W
G
BB
A1 A2 EXB2HV
Part No.
(inch size)
Dimensions (mm)
Mass (Weight)
[g/1000 pcs.]
LWTA1A2BPG
EXBN8V (0402×4) 2.00
±0.10 1.00±0.10 0.45±0.10 0.30
±0.10 0.30
±0.10 0.20±0.15 (0.50) 0.30±0.15 3.0
EXBV4V (0603×2) 1.60+0.20 1.60+0.20 0.60±0.10 0.60
±0.10 — 0.30±0.15 (0.80) 0.45±0.15 5.0
EXBV8V (0603×4) 3.20+0.20 1.60+0.20 0.60±0.10 0.60
±0.10 0.60
±0.10 0.30±0.15 (0.80) 0.45±0.15 10
EXBS8V (0805×4) 5.08+0.20 2.20+0.20 0.70±0.20 0.80±0.15 0.80±0.15 0.50±0.15 (1.27) 0.55±0.15 30
Part No.
(inch size)
Dimensions (mm)
Mass (Weight)
[g/1000 pcs.]
LWTA1A2BPG
EXB14V (0201×2) 0.80
±0.10 0.60±0.10 0.35±0.10 0.35±0.10 — 0.15±0.10 (0.50) 0.15±0.10 0.5
EXB24V (0402×2) 1.00±0.10 1.00±0.10 0.35±0.10 0.40±0.10 — 0.18±0.10 (0.65) 0.25±0.10 1.2
EXB28V (0402×4) 2.00±0.10 1.00±0.10 0.35±0.10 0.45±0.10 0.35±0.10 0.20±0.10 (0.50) 0.25±0.10 2.0
EXB2HV (0602×8) 3.80±0.10 1.60±0.10 0.45±0.10 0.35±0.10 0.35±0.10 0.30±0.10 (0.50) 0.30±0.10 9.0
EXB34V (0603×2) 1.60±0.20 1.60±0.15 0.50±0.10 0.65±0.15 — 0.30±0.20 (0.80) 0.30±0.20 3.5
EXB38V (0603×4) 3.20±0.20 1.60±0.15 0.50±0.10 0.65±0.15 0.45±0.15 0.30±0.20 (0.80) 0.35±0.20 7.0
–0.10
–0.10
–0.10
–0.10
–0.10
–0.10
Part No.
(inch size)
Dimensions (mm)
Mass (Weight)
[g/1000 pcs.]
LWTA1A2BPG
EXB18V (0201×4) 1.40±0.10 0.60±0.10 0.35±0.10 0.20±0.10 0.20±0.10 0.10±0.10 (0.40) 0.20±0.10 1.0
( ) Reference
(1) Convex Terminal type
(2) Concave Terminal type
(3) Flat Terminal type
( ) Reference
( ) Reference
Dimensions in mm (not to scale)
Feb. 201805
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Chip Resistor Array
– 48 –
Test Item Performance
Requirements Test Conditions
Resistance Within Specifi ed
Tolerance 20 °C
T. C. R. Within Specifi ed
T. C. R. +25 °C/+125 °C
Overload ±2% Rated Voltage × 2.5, 5 s
Jumper type : Max. Overload Current, 5 s
Resistance to Soldering Heat
±1% 270 °C, 10 s
Rapid Change of Temperature ±1% –55 °C (30min.) / +125 °C (30min.), 100 cycles
High Temperature Exposure ±1% +125 °C , 1000 h
Damp Heat, Steady State ±1% 60 °C, 90% to 95 %RH, 1000 h
Load Life in Humidity ±3% 60 °C, 90% to 95 %RH, Rated Voltage (Jumper type: Rated Current),
1.5 h ON/0.5 h OFF cycle, 1000 h
Endurance at 70 °C ±3% 70 °C, Rated Voltage(Jumper type: Rated Current),
1.5 h ON/0.5 h OFF cycle, 1000 h
Perfomance
Feb. 201805
Panasonic DD DDDDCIDD : ’:l: xxxxxxx
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Anti-Sulfurated Chip Resistor Array
– 49 –
E
1
X
2
B
3
U
4
2
5
8
6
4
7
7
8
2
9
J
10
X
11
Thick Film
Chip Resistor
Networks
Product Code
The first two digits are significant figures
of resistance value and the third one
denotes the number of zeros following.
Jumper is expressed by R00
Resistance Value
Example : 222 2.2k Ω
Resistance
Tolerance
J
0
±5 %
Jumper
Packaging Methods
Code
X
V
Packaging Part No.
Punched Carrier Taping
2 mm pitch, 10,000 pcs.
Punched Carrier Taping
4 mm pitch, 5,000 pcs.
EXBU2H,
U34, U38
EXBU14, U18,
U24, U28
0201×2
0201×4
0402×2
0402×4
0602×8
0603×2
0603×4
U14
U18
U24
U28
U2H
U34
U38
Convex Terminal
Flat Terminal
Convex Terminal
Convex Terminal
Convex Terminal
Convex Terminal
Convex Terminal
Code Inch Construction
4
1
3
2
8
1
7
2
6
3
5
4
16
1
15
2
14
3
13
4
12
5
11
6
10
7
9
8
Protective coating
Electrode
(Inner)
Electrode
(Between)
Electrode
(Outer)
Alumina substrate
Thick film
resistive element
Anti-Sulfurated
Chip Resistor Array
Type: EXB U14, U18, U24, U28,
U2H, U34, U38
As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Isolated type
High resistance to sulfurization achieved by adopting an Ag-Pd-based inner electrode
High density
2 resistors in 0.8 mm × 0.6 mm size / 0302 inch size : EXBU14
4 resistors in 1.4 mm × 0.6 mm size / 0502 inch size : EXBU18
2 resistors in 1.0 mm × 1.0 mm size / 0404 inch size : EXBU24
4 resistors in 2.0 mm × 1.0 mm size / 0804 inch size : EXBU28
8 resistors in 3.8 mm × 1.6 mm size / 1506 inch size : EXBU2H
2 resistors in 1.6 mm × 1.6 mm size / 0606 inch size : EXBU34
4 resistors in 3.2 mm × 1.6 mm size / 1206 inch size : EXBU38
Improvement of placement ef ciency
Placement ef ciency of Chip Resistor Array is two, four or eight times of the fl at type chip resistor
Reference StandardIEC 60115-9, JIS C 5201-9, EIAJ RC-2129
AEC-Q200 qualifi ed (EXBU2, EXBU3)
RoHS compliant
U14, U24,
U34
U18, U28,
U38
U2H
2 resistors 4 resistors 8 resistors
Features
Explanation of Part Numbers
Construction Schematics
Feb. 201806
Panasonic RCWV=\
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Anti-Sulfurated Chip Resistor Array
– 50 –
–60 –40 –20 0 20 40 60 80 100 120 140 160 180
0
20
40
60
80
100 70 °C–55 °C
125 °C
Ambient Temperature (°C)
Rated Load (%)
Part No.
(inch size)
Power Rating
at 70 °C
(W / element)
Limiting Element
Voltage
(1)
(V)
Maximum Overload
Voltage
(2)
(V)
Resistance
Tolerance
(%)
Resistance
Range
(Ω)
T.C.R.
(×10–6/°C)
Category
Temperature Range
(°C)
AEC-Q200
Grade
EXBU14
(0201×2) 0.031 12.5 25 ±5 10 to 1M (E24)
<10 Ω :
–200 to +600
10 Ω to1M Ω :
±200
–55 to +125
EXBU18
(0201×4)
0.031
(0.1 W / package)
12.5 25 ±5 10 to 1M (E24) –55 to +125
EXBU24
(0402×2) 0.063 50 100 ±5 1 to 1M (E24) –55 to +125 Grade 1
EXBU28
(0402×4) 0.063 50 100 ±5 1 to 1M (E24) –55 to +125 Grade 1
EXBU2H
(0602×8)
0.063
(0.25 W / package)
25 50 ±5 10 to 1M (E24) –55 to +125 Grade 1
EXBU34
(0603×2) 0.063 50 100 ±5 1 to 1M (E24) –55 to +125 Grade 1
EXBU38
(0603×4) 0.063 50 100 ±5 1 to 1M (E24) –55 to +125 Grade 1
Ratings
(1)
Rated Continuous Working Voltage (RCWV) shall be de ter mined from RCWV=Power Rating × Re sis tance Values, or Limiting Element Voltage list ed above, whichever less.
(2)
Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) × RCWV or Maximum Overload Voltage listed above, whichever less.
[For Resistor]
Part No.
(inch size)
Rated Current
(A / element)
Maximum Over load Current (1)
(A)
EXBU24
(0402×2)
12
EXBU28
(0402×4)
EXBU2H
(0602×8)
EXBU34
(0603×2)
EXBU38
(0603×4)
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure below.
(1) Overload test current
[For Jumper]
Feb. 201806
Panasonic gywwuu T
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Anti-Sulfurated Chip Resistor Array
– 51 –
A1
PT
P
L
T
L
BB
G
BB
GG
W
W
G
A1 A2
EXBU14, U24, U34
EXBU28, U38
PT
L
G
W
G
BB
A1 A2 EXBU2H
PLT
G
W
G
BB
A1 A2 EXBU18
Test Item Performance
Requirements Test Conditions
Resistance Within Specifi ed
Tolerance 20 °C
T. C. R. Within Specifi ed
T. C. R. +25 °C/+125 °C
Overload ±2% Rated Voltage × 2.5, 5 s
Jumper type : Max. Overload Current, 5 s
Resistance to Soldering Heat
±1% 270 °C, 10 s
Rapid Change of Temperature ±1% –55 °C (30min.) / +125 °C (30min.), 100 cycles
High Temperature Exposure ±1% +125 °C , 1000 h
Damp Heat, Steady State ±1% 60 °C, 90% to 95 %RH, 1000 h
Load Life in Humidity ±3% 60 °C, 90% to 95 %RH, Rated Voltage (Jumper type: Rated Current),
1.5 h ON/0.5 h OFF cycle, 1000 h
Endurance at 70 °C ±3% 70 °C, Rated Voltage(Jumper type: Rated Current),
1.5 h ON/0.5 h OFF cycle, 1000 h
Perfomance
Dimensions in mm (not to scale)
Part No.
(inch size)
Dimensions (mm)
Ma
ss (Weight)
[g/1000 pcs.]
LWTA1A2BPG
EXBU14 (0201×2) 0.80
±0.10 0.60±0.10 0.35±0.10 0.35±0.10 — 0.15±0.10 (0.50) 0.15±0.10 0.5
EXBU18 (0201×4) 1.40±0.10 0.60±0.10 0.35±0.10 0.20±0.10 0.20±0.10 0.10±0.10 (0.40) 0.20±0.10 1.0
EXBU24 (0402×2) 1.00±0.10 1.00±0.10 0.35±0.10 0.40±0.10 — 0.18±0.10 (0.65) 0.25±0.10 1.2
EXBU28 (0402×4) 2.00±0.10 1.00±0.10 0.35±0.10 0.45±0.10 0.35±0.10 0.20±0.10 (0.50) 0.25±0.10 2.0
EXBU2H (0602×8) 3.80±0.10 1.60±0.10 0.45±0.10 0.35±0.10 0.35±0.10 0.30±0.10 (0.50) 0.30±0.10 9.0
EXBU34 (0603×2) 1.60±0.20 1.60±0.15 0.50±0.10 0.65±0.15 — 0.30±0.20 (0.80) 0.30±0.20 3.5
EXBU38 (0603×4) 3.20±0.20 1.60±0.15 0.50±0.10 0.65±0.15 0.45±0.15 0.30±0.20 (0.80) 0.35±0.20 7.0
( ) Reference
Feb. 201806
Panasonic DDDCDDDIDKDI
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Chip Resistor Networks
– 52 –
E
1
X
2
B
3
E
4
1
5
0
6
C
7
1
8
0
9
3
10
J
11 12
Product Code
Thick Film
Resistor
Network
Number of
Terminals
10(EXBD,E,A)
16(EXBQ)
Circuit Configuration
Code
C
Common Terminal Position The first two digits are
significant figures of
resistance value and
the third one denotes
the number of zeros
following.
Resistance Value Resistance
Tolerance
J
Suffix for Special
Requirements
Dimension Code of
Chip Resistor Network
Code
Dimensions
4.0 mm×2.1 mm
6.4 mm×3.1 mm
3.8 mm×1.6 mm
P
P
E
Center common circuit
(EXBD, EXBE)
Diagonal common circuit
(Terminal 5 and Terminal 10)
(EXBA)
D
E
A
Q
3.2 mm×1.6 mm
One side common circuit
(Terminal 16)
(EXBQ)
Diagonal common circuit
(Terminal 1 and Terminal 6)
(EXBA)
±5 %
Inch
1206
1608
2512
1506
No through hole
Through holes
Pull up resistors
0.4 mm pitch 0.635 mm pitch
EXBE10C EXBA10P
Direct placement on the bus line
IC IC
VCC
IC IC
VCC
IC IC
VCC
Explanation of Part Numbers
Features
High density placing for digital signal circuits
· Bussed 8 or 15 resistors for pull up/down circuits
EXBD: 3.2 mm × 1.6 mm × 0.55 mm, 0.635 mm pitch
EXBE: 4.0 mm × 2.1 mm × 0.55 mm, 0.8 mm pitch
EXBA: 6.4 mm × 3.1 mm × 0.55 mm, 1.27 mm pitch
EXBQ: 3.8 mm × 1.6 mm × 0.45 mm, 0.5 mm pitch
· Available direct placing on the bus line by means of half pitch spacing without through-holes on PWB
(“High density placing” is shown below)
High speed mounting using conventional placing machine
Reference Standard…IEC 60115-9, JIS C 5201-9, EIAJ RC-2130
RoHS compliant
As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
[High density placing]
Chip Resistor Networks
Type: EXBD
EXBE
EXBA
EXBQ
Feb. 201903
Panasonic — I mm 5 7" fir E EH: {E E E E E
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Chip Resistor Networks
– 53 –
I03
0.3±0.2
0.5±0.2
f0.3+0.1
–0.2
0.3±0.2
0.25±0.20
0.5±0.2
0.8±0.1
4.0±0.2
0.25±0.20
0.35±0.20 0.4±0.2 0.35±0.20
0.4±0.2
0.5±0.2
0.4±0.2
2.1±0.2
0.55±0.10
f0.3+0.1
–0.2
0.7±0.2
0.3±0.2
0.3±0.2
6.4±0.2
1.27±0.10
0.5±0.2
0.5±0.2
0.5±0.2
3.1±0.2
0.55±0.10
I03
EXBA10E
I03 I03
EXBA10P
0.25±0.10
0.3±0.1 0.25±0.10
0.35±0.15
0.35
±
0.15
0.40±0.15
1.60±0.15
0.55±0.10
0.2±0.1
0.33±0.15 0.2±0.1
0.2±0.1
0.2
±
0.1
f0.2±0.1
3.20±0.15
0.635±0.10
0.40±0.15
0.15+0.15
–0.05
0.15+0.20
–0.05
0.15+0.15
–0.05
0.3±0.1
0.2±0.1
0.25±0.15
3.8±0.2
0.5±0.1
0.30±0.15
1.6±0.2
0.45±0.10
472
10987
2345
61
10 6
15
987
234
10 6
15
987
234
10
15
9
234 678
111213141516
Protective coating
Thick film
resistive element
Electrode (Inner)
Electrode (Between)
Electrode (Outer)
Alumina substrate
Alumina substrate
Protective coating
Electrode
(Inner)
Thick film
resistive element
Construction (Example : EXBD)
Dimensions in mm (not to scale)
Circuit Confi guration
EXBD EXBE
Mass (Weight)[1000 pcs.] : 10 g Mass (Weight)[1000 pcs.] : 16 g
EXBA EXBQ
Mass (Weight)[1000 pcs.] : 40 g Mass (Weight)[1000 pcs.] : 9 g
EXBD, EXBE EXBA EXBQ
EXBA10P EXBA10E
Feb. 201903
Panasonic ncwm
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Chip Resistor Networks
– 54 –
0
20
40
60
80
100
–60 –40 –20
0 20406080
100120 140160180
–55 °C 70 °C
125 °C
Rated Load (%)
Ambient Temperature (°C)
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
Ratings
Item Specifi cations
Part No. EXBD EXBE EXBA EXBQ
Resistance Range (Ω) 47 to 1M (E12 series)
100 to 470k (E6 series)
Resistance Tolerance (%) ±5
Number of Terminals 10 terminals 16 terminals
Number of Resistors 8 element 15 element
Power Rating(3) at 70 °C (W) 0.05 /element 0.063 /element 0.025 /element
Limiting Element Voltage(1) (V) 25 50 25
Maximum Overload Voltage(2) (V) 50 100 50
T. C. R. (× 10–6/ °C) ±200
Category Temperature Range (°C) –55 to +125
AEC-Q200 Grade
(1)
Rated Continuous Working Voltage (RCWV) shall be de ter mined from RCWV=Power Rating × Re sis tance Values, or Limiting Element Voltage list ed above, whichever less.
(2)
Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) × RCWV or Maximum Overload Voltage listed above, whichever less.
(3) Use it on the condition that the case temperature is below the upper category temperature.
Test Item Performance
Requirements Test Conditions
Resistance Within Specifi ed
Tolerance 20 °C
T. C. R. Within Specifi ed
T. C. R. +25 °C/+125 °C
Overload ±3 % Rated Voltage × 2.5, 5 s
Resistance to Soldering Heat
±1 % 260 °C±5 °C, 5 s±1 s
Rapid Change of
Temperature ±2 % –55 °C (30min.) / +125 °C (30min.), 5 cycles
High Temperature
Exposure ±3 % +125 °C , 100 h
Load Life in Humidity ±3 % 60 °C±2 °C, 90 % to 95 %RH, Rated Power × 0.1,
1.5 h ON / 0.5 h OFF cycle, 500 h
Endurance at 70 °C ±5 % 70 °C±2 °C, Rated Voltage, 1.5 h ON / 0.5 h OFF cycle, 1000 h
Perfomance
Feb. 201903
Panasonic D IIHDDDQDIDD E;
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Chip Attenuator
– 55 –
0.8 mm × 0.6 mm
(inch size : 0302)
π type attenuator
1.0 mm × 1.0 mm
(inch size : 0404)
π type attenuator
One-digit number /one letter
shows attenuation value
(ex.) 11 dB, A10 dB
Thick Film Resistor
Network
E
1
X
2
B
3
1
4
4
56
T
7
3
8
A
9
R
10
3 X
11 12
A
R3 ±0.3 dB
R5 ±0.5 dB
Product Code Attenuation Value ToleranceDimensions and
Circuit Configuration
Code
14AT
24AT
A 50 Ω
Characteristics
Impedance
Punched Carrier Taping
2 mm pitch, 10,000 pcs.
X
Packaging
11
10
9
8
7
6
5
4
3
2
1
0
Attenuation (dB)
30 k 100 k 10 M1 M 100 M 3 G1 G
Frequency (Hz)
1dB
2dB
3dB
4dB
5dB
6dB
10dB
R1
R2R2
Unbalanced π type
12
43
Explanation of Part Numbers
Features
Recommended Applications
Unbalanced π type attenuator circuit in one chip
EXB14AT (0.8 mm × 0.6 mm), EXB24AT (1.0 mm × 1.0 mm)
Reduced mounting area :
EXB14AT : About 60 % smaller than the area of an attenuator circuit consisting of three 0603 chip resistors,
almost equal to the area of three 0402 chip resistors
EXB24AT : About 50 % smaller than the area of an attenuator circuit consisting of
three 1005 chip resistors, almost equal to the area of three 0603 chip resistors
Mounting cost reduction : (Only 1 chip placed as compared to 3)
Attenuation : 1 dB to 10 dB
RoHS compliant
Attenuation / level control / impedance matching of high frequency
(communication signalling equipment cellular phones(GSM, CDMA, PDC, etc.), PHS, PDAs)
As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Chip Attenuator
Type: EXB 14AT
EXB 24AT
(EXB14AT, EXB24AT)
Attenuation-Frequency Characteristics
Circuit Confi guration
Sep. 201402
Panasonic 21+ IE
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Chip Attenuator
– 56 –
–40
–20 0 20 40 60 80 100 120 140 160
0
–60
70 °C
–55 °C
20
40
60
80
100
120
125 °C
Ambient Temperature (°C)
Rated Power (%)
Protective coating
Thick film
resistive element Electrode (Inner) Electrode (Between)
Electrode (Outer)
Alumina substrate
A
43
12
B
W
C
T
P
L
C
12
3
4
A
B
W
T
P
L
Protective
coating
Alumina
substrate
Electrode (Between)
Electrode (Outer)
Electrode (Inner)
Thick film
resistive element
Construction
Dimensions in mm (not to scale)
Ratings
Please inquire about the other Attenuator value
Part No. EXB14AT, EXB24AT
Attenuation Value 1 dB, 2 dB, 3 dB, 4 dB, 5 dB, 6 dB, 10 dB
Attenuation Value Tolerance 1 dB, 2 dB, 3 dB, 4 dB, 5 dB : ±0.3 dB
6 dB, 10 dB : ±0.5 dB
Characteristic Impedance 50 Ω
Power Rating 0.04 W /package
Frequency Range at 70 °C DC to 3.0 GHz
VSWR (Voltage Standing Wave Ratio) 1.3 max.
Number of Resistors 3 resistors
Number of Terminals 4 terminals
Category Temperature Range –55 °C to +125 °C
<Marking Configuration>
The bar marking for recognizing terminal direction
is located on the side of terminal 4.
Mass (Weight) [1000 pcs.] : 1.1 g
Di men sions
(mm)
LWTAB
CP
(typical value)
1.00±0.10 1.00±0.10 0.35±0.10 0.40±0.10 0.15±0.10 0.25±0.10 0.65
<Marking Configuration>
The bar marking for recognizing terminal direction
is located on the side of terminal 3, 4.
Mass (Weight) [1000 pcs.] : 0.7 g
Di men sions
(mm)
LWTABCP
(typical value)
0.80±0.10 0.60±0.10 0.35±0.10 0.35±0.10 0.15±0.10 0.15±0.10 0.50
EXB14AT EXB24AT
EXB14AT EXB24AT
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
Sep. 201402
Panasonic
Surface Mount Resistors Packaging Method (Taping)
– 57 –
Surface Mount Resistors Series Packaging (Standard Quantity : pcs./reel)
Products Part No.
Size mm
(inch)
Pressed
Carrier Taping
(2 mm pitch)
Punched
Carrier Taping
(2 mm pitch)
Punched
Carrier Taping
(4 mm pitch)
Embossed
Carrier Taping
(4 mm pitch)
Thick Film
Chip Resistors
ERJXGN
0402(01005)
20,000 4,0000 ✽✽
ERJ1GN 0603(0201) 15,000
ERJ2GE 1005(0402) 10,000, 20,000
ERJ3GE 1608(0603) — 5,000
ERJ6GE 2012(0805) — 5,000
ERJ8GE 3216(1206) — 5,000
ERJ14 3225(1210) — 5,000
ERJ12 4532(1812) — 5,000
ERJ12Z 5025(2010) — 5,000
ERJ1T 6432(2512) — 4,000
Precision
Thick Film
Chip Resistors
ERJXGN
0402(01005)
20,000 4,0000 ✽✽
ERJ1GN/1RH 0603(0201) 15,000
ERJ2RC/2RH/2RK 1005(0402) — 10,000
ERJ3RB/3RE/3EK 1608(0603) — 5,000
ERJ6RB/6RE/6EN 2012(0805) — 5,000
ERJ8EN 3216(1206) — 5,000
ERJ14N 3225(1210) — 5,000
ERJ12N 4532(1812) — 5,000
ERJ12S 5025(2010) — 5,000
ERJ1TN 6432(2512) — 4,000
Metal Film (Thin Film)
Chip Resistors,
High Reliability Type
/Anti-ESD Type
ERA1A 0603(0201) 15,000 —
ERA2A/2V 1005(0402) — 10,000
ERA3A/3V 1608(0603) — 5,000
ERA6A/6V 2012(0805) — 5,000
ERA8A 3216(1206) — 5,000 —
Thick Film
Chip Resistors/
Low Resistance
Type
ERJ2LW/2BW 1005(0402) 10,000
ERJ2BS/2BQ 1005(0402) — 10,000
ERJ3L/3B/3R/L03 1608(0603) — 5,000
ERJ6L/6B/6C
ERJ6D/6R/L06 2012(0805) — 5,000
ERJ8B/8C/8R/L08 3216(1206) — 5,000
ERJ14B/14R/L14 3225(1210) — 5,000
ERJ12R/L12 4532(1812) — 5,000
ERJ12Z/L1D 5025(2010) — 5,000
ERJ1TR 6432(2512) — 4,000
ERJL1W 6432(2512) — 3,000
Current Sensing
Resistors,
Metal Plate Type
ERJMP2 3216(1206) — 3,000
ERJMP3 5025(2010) — 3,000
ERJMP4 6432(2512) ———2,000
ERJMS4 6432(2512) — 2,000
ERJMS6 6468(2526) 1,000
(8 mm Pitch)
ERJMB1 2550(1020) — 3,000
ERJM1W 6432(2512) — 3,000
Current Sensing Resistors,
Metal Foil Type
ERJMFBA 1005(0402) — 10,000 ——
W8P2 : Width 8 mm, Pitch 2 mm, ✽✽ W4P1 : Width 4 mm, Pitch 1 mm
(1) Anti-Sulfurated High Power Chip Resistors / Wide Terminal Type
Aug. 201816
Panasonic
Surface Mount Resistors Packaging Method (Taping)
– 58 –
Surface Mount Resistors Series Packaging (Standard Quantity : pcs./reel)
Products Part No.
Size mm
(inch)
Pressed
Carrier Taping
(2 mm pitch)
Punched
Carrier Taping
(2 mm pitch)
Punched
Carrier Taping
(4 mm pitch)
Embossed
Carrier Taping
(4 mm pitch)
High Power
Chip Resistors/
Wide Terminal Type
ERJA1 3264(1225) — 4,000
ERJB1/ERJC1(1)
ERJC1(2) 2550(1020) — 5,000
ERJB2/ERJD2(2) 1632(0612) — 5,000
ERJB3 1220(0508) — 5,000
High Precision/
Anti-Surge
Thick Film
Chip Resistors
ERJPA2 1005(0402) — 10,000 ——
ERJPB3/P03/PA3 1608(0603) — 5,000
ERJPB6/P06 2012(0805) — 5,000
ERJP08 3216(1206) — 5,000
ERJP14 3225(1210) — — 5,000
Anti-Pulse
Thick Film
Chip Resistors
ERJT06 2012(0805) ——5,000 —
ERJT08 3216(1206) — 5,000
ERJT14 3225(1210) — 5,000
Anti-Sulfurated
Thick Film
Chip Resistors
ERJU01 0603(0201) 15,000
ERJS02/U02 1005(0402) — 10,000
ERJS03/U03 1608(0603) — 5,000
ERJS06/U06
ERJU6S/U6Q/UP6 2012(0805) — 5,000
ERJS08/U08/UP8 3216(1206) — 5,000
ERJS14/U14 3225(1210) — 5,000
ERJS12/U12 4532(1812) — 5,000
ERJS1D/U1D 5025(2010) — 5,000
ERJS1T/U1T 6432(2512) — 4,000
Chip Resistor
Array
EXB14V 0806(0302) — 10,000 —
EXB24V 1010(0404) — 10,000 —
EXB34V 1616(0606) — 5,000 —
EXBV4V 1616(0606) — 5,000
EXB18V 1406(0502) 10,000 ——
EXB28V 2010(0804) 10,000 ——
EXBN8V 2010(0804) 10,000 ——
EXB38V 3216(1206) — 5,000
EXBV8V 3216(1206) — 5,000 —
EXBS8V 5022(2009) — 2,500
EXB2HV 3816(1506) — 5,000
Anti-Sulfurated
Chip Resistor
Array
EXBU14 0806(0302) — 10,000 —
EXBU18 1406(0502) — 10,000 —
EXBU24 1010(0404) — 10,000 —
EXBU34 1616(0606) — 5,000
EXBU28 2010(0804) — 10,000 —
EXBU38 3216(1206) — 5,000
EXBU2H 3816(1506) — 5,000
Chip Resistor
Networks
EXBD 3216(1206) ——5,000 —
EXBE 4021(1608) — ——4,000
EXBA 6431(2512) — 4,000
EXBQ 3816(1506) — 5,000
Chip Attenuator EXB14AT 0806(0302) — 10,000 —
EXB24AT 1010(0404) — 10,000 —
(1) Anti-Sulfurated High Power Chip Resistors / Wide Terminal Type
(2) Low TCR High Power Chip Resistors / Wide Terminal Type
Aug. 201816
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Surface Mount Resistors Packaging Method (Taping)
– 59 –
TT TA
P0
P2
P1
P1
fD0
fD1 (Only Emboss)
B
F
W
E
(2 mm Pitch)
Carrier Tape
0
Part No. Size mm
(inch) ABWFEP
1P2P00D0T
ERJXGN
0402(01005)
0.24±0.03 0.45±0.03
8.00±0.20 3.50±0.05 1.75±0.10 2.00±0.10 2.00±0.05 4.00±0.10 1.50+0.10
0.31±0.05
ERJ1GN
ERJ1R
ERJU01
ERA1A
0603
(0201) 0.38±0.05 0.68±0.05 0.42±0.05
ERJ2LW
1005(0402)
0.68±0.10 1.20±0.10 0.60±0.05
ERJ2BW
1005(0402)
0.67±0.10 1.17±0.10 0.61±0.05
Pressed Carrier Taping (2 mm Pitch)
Chip Resistors / Precision Chip / Metal Film(Thin Film)Chip / Low Resistance / Anti-Surge / Anti-Sulfur
(Unit : mm)
Part No. Size mm
(inch) ABWFEP
1P2P00D0T
ERJ3
ERJ3LW
(10 mΩ)
ERJ3BW
ERJ□□3
ERA3
1608
(0603) 1.10±0.10 1.90±0.10
8.00±0.20 3.50±0.05 1.75±0.10 4.00±0.10 2.00±0.05 4.00±0.10 1.50+0.10
0.70±0.05
ERJ3LW
(5 mΩ)
0.84±0.05
ERJ6
ERJ□□6
ERJU6S, U6Q
ERA6
2012
(0805) 1.65±0.15 2.50±0.20
ERJB3 1220(0508)
ERJ6BW 2012
(0805) 1.55±0.15 2.30±0.20
ERJ6LW
ERJ6CW 0.94±0.05
ERJ8
ERJ8W
ERJ□□8
ERA8A
3216
(1206) 2.00±0.15 3.60±0.20 0.84±0.05
ERJB2
ERJD2
1632
(0612)
0
Punched Carrier Taping (4 mm Pitch)
Chip Resistors / Precision Chip / Metal Film(Thin Film)Chip / Low Resistance / High Power / High Precision / Anti-Surge / Anti-Pulse / Anti-Sulfur
(Unit : mm)
Part No. Size mm
(inch) ABWFEP
1P2P00D0T
ERJ2
ERJPA2
ERJ□□2
ERA2
1005
(0402) 0.67±0.05 1.17±0.05 8.00±0.20 3.50±0.05 1.75±0.10 2.00±0.10 2.00±0.05 4.00±0.10 1.50+0.10 0.52±0.05
ERJMFBA
0.60±0.05
0
Punched Carrier Taping (2 mm Pitch)
Chip Resistors / Precision Chip / Metal Film(Thin Film)Chip / Low Resistance / Anti-Surge / Anti-Sulfur / Metal Foil Type
(Unit : mm)
Part No. Size mm
(inch) ABWFEP
1P2P00D0T
EXB14V
EXB14AT
0806
(0302) 0.70+0.10 0.95+0.05
8.00±0.20 3.50±0.05 1.75±0.10 2.00±0.10 2.00±0.05 4.00±0.10 1.50+0.10 0.52±0.05
EXB18V
1406(0502)
1.60±0.10
EXB24V
EXBU24
EXB24AT
1010
(0404)
1.20±0.10
1.20±0.10
EXB28V
EXBU28
EXBN8V
2010
(0804) 2.20±0.10
−0.05
−0.10
0
Chip Resistor Array / Anti-Sulfurated Chip Resistor Array / Chip Attenuator (Unit : mm)
Pressed Carrier Punched Carrier Embossed Carrier
Aug. 201814
Panasonic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Surface Mount Resistors Packaging Method (Taping)
– 60 –
Part No.
Size mm (inch)
ABWFEP
1P2P00D0T
EXB34V
EXBU34
1616(0606)
1.95±0.15
1.95±0.20
8.00±0.20 3.50±0.05 1.75±0.10 4.00±0.10 2.00±0.05 4.00±0.10 1.50+0.10
0.70±0.05
EXB38V
EXBU38
3216(1206)
3.60±0.20
EXB2HV
EXBU2H
3816(1506)
4.10±0.15
EXBV4V
1616(0606)
1.95±0.20
0.84±0.05
EXBV8V
3216(1206)
3.60±0.20
EXBD
3216(1206)
2.00±0.20 3.60±0.20 0.84±0.10
EXBQ
3816(1506)
1.90±0.20 4.10±0.20 0.64±0.05
0
Chip Resistor Array / Anti-Sulfurated Chip Resistor Array / Chip Resistor Networks (Unit : mm)
Part No.
Size mm (inch)
ABWFEP
1P2P00D0T
ERJXGN
0402(01005)
0.25±0.05 0.45±0.05 4.00±0.20 1.80±0.05 0.90±0.10 1.00±0.10 1.00±0.10 2.00±0.10 0.80±0.10
0.5 max.
Embossed Carrier Taping (1 mm Pitch)
Chip Resistors (Unit : mm)
Part No.
Size mm (inch)
ABWFEP
1P2P00D0T0D1
ERJ14
ERJ14
3225
(1210) 2.80±0.20 3.50±0.20 8.00±0.30 3.50±0.05
1.75±0.10 4.00±0.10 2.00±0.05 4.00±0.10 1.50+0.10
1.00±0.10
1.00+0.10
ERJ12
ERJ12
4532
(1812) 3.50±0.20 4.80±0.20
12.00±0.30
5.50±0.20 1.5 min.
ERJ12Z
ERJ12S
ERJ1D
5025
(2010)
2.80±0.20 5.30±0.20
ERJB1
ERJC1
ERJD1
2550
(1020)
ERJ1T
ERJ1T 6432
(2512) 3.60±0.20 6.90±0.20
ERJL1W 1.60±0.10
ERJA1
3264(1225)
3.50±0.20 6.80±0.20 1.10±0.20
0
0
Embossed Carrier Taping (4 mm Pitch)
Chip Resistors / Precision Chip / Low Resistance / High Power / Anti-Surge / Anti-Pulse / Anti-Sulfur Pulse / Anti-Sulfur
(Unit : mm)
Chip Resistor Array / Chip Resistor Networks
Part No.
Size mm (inch)
ABWFEP
1P2P00D0T0D1
EXBS8V
5022(2029)
2.80±0.20 5.70±0.20
12.00±0.30
5.50±0.20 1.75±0.10 4.00±0.10 2.00±0.05 4.00±0.10 1.50+0.10
1.6 max.
1.5 min.EXBE
4021(1608)
2.50±0.20 4.40±0.20
1.10±0.20
EXBA
6431(2512)
3.50±0.20 6.80±0.20
0
(Unit : mm)
Current Sensing Resistors, Metal Plate Type (Unit : mm)
Part No.
Size mm (inch)
ABWFEP
1P2P00D0T0D1
ERJMP2
(1m Ω)
3216(1206)
1.90±0.20 3.50±0.20
8.00±0.30
3.50±0.10
1.75±0.10 4.00±0.10 2.00±0.05 4.00±0.10 1.50+0.10
1.55±0.20
ERJMP2
(2m Ω)
3216(1206)
1.40±0.20
ERJMP2
(3 to 50m Ω)
3216(1206)
1.10±0.20
ERJMP3
(1 to 2m Ω)
5025(2010)
2.90±0.20 5.40±0.20
12.00±0.30
5.50±0.10
1.55±0.20
ERJMP3
(3 to 50m Ω)
5025(2010)
1.15±0.20
ERJMB1
2550(1020)
1.55±0.20
ERJMP4
(1 to 2m Ω)
6432(2512)
3.50±0.20 6.90±0.20
12.00±0.30
5.50±0.10
1.60±0.20 1.5 min.
ERJMP4
(3 to 50m Ω)
6432(2512)
1.20±0.20
ERJMS4
6432(2512)
1.60±0.20 1.5 min.
ERJM1W
6432(2512)
1.80±0.20 1.5 min.
0
Aug. 201814
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Surface Mount Resistors Packaging Method (Taping)
– 61 –
fN
W2
W
1
fA
fCTape Width
(W) 0A0N0CW
1W2
4mm Width 180.0±3.0
60.0+1.0
13.0±0.2
4.5±0.5 7.0±0.5
8mm Width 180.0 –1.5
9.0+1.0 11.4±1.0
12mm Width 13.0+1.0 15.4±1.0
24mm Width 380.0±2.0 80.0±1.0 25.4±1.0 29.4±1.0
000
0
(Unit : mm)
Current Sensing Resistors, Metal Plate Type (Unit : mm)
Embossed Carrier Taping (8 mm Pitch)
Taping Reel
Part No.
Size mm (inch)
ABWFEP
1P2P00D0T0D1
ERJMS6
6468(2526)
6.90±0.20 7.50±0.20
12.00±0.30
5.50±0.05 1.75±0.10 8.00±0.10 2.00±0.05 4.00±0.10 1.50+0.10 2.45±0.20 1.5 min.
0
Aug. 201814
Panasonic F—TW—T
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Surface Mount Resistors Land Pattern
– 62 –
c
a
b
Chip Resistor
a
cbb
Recommended Land Pattern
Size
mm/inch
Dimensions (mm)
abc
0402/01005 0.15 to 0.20 0.5 to 0.7 0.20 to 0.25
0603/0201 0.3 to 0.4 0.8 to 0.9 0.25 to 0.35
1005/0402 0.5 to 0.6 1.4 to 1.6 0.4 to 0.6
1608/0603 0.7 to 0.9 2.0 to 2.2 0.8 to 1.0
2012/0805 1.0 to 1.4 3.2 to 3.8 0.9 to 1.4
3216/1206 2.0 to 2.4 4.4 to 5.0 1.2 to 1.8
3225/1210 2.0 to 2.4 4.4 to 5.0 1.8 to 2.8
4532/1812 3.3 to 3.7 5.7 to 6.5 2.3 to 3.5
5025/2010 3.6 to 4.0 6.2 to 7.0 1.8 to 2.8
6432/2512 5.0 to 5.4 7.6 to 8.6 2.3 to 3.5
6432/25123.6 to 4.0 7.6 to 8.6 2.3 to 3.5
ERJL1W
An example of a land pattern for High Power Chip Resistors / Wide Terminal Type is shown below.
Part No. Dimensions (mm)
abc
ERJA1 6.4 1.70 0.60
ERJB1
ERJC1(1)
ERJD1(2)
5.0 1.30 0.75
ERJB2
ERJD2(2) 3.2 0.95 0.70
ERJB3 2.0 0.80 0.60
An example of a land pattern for the Rectangular Type is shown below.
Part No. Size
mm/inch
Dimensions (mm)
abc
ERJ2LW/2BW
1005/0402
0.52 1.4 to 1.6 0.4 to 0.6
ERJ3LW/3BW
1608/0603
0.5 to 0.8 2.5 to 2.7 0.9 to 1.1
ERJ6LW
2012/0805
0.6 to 0.8 3.2 to 3.8 1.1 to 1.4
ERJ6BW
2012/0805
0.9 3.2 to 3.8 1.1 to 1.4
ERJ6CW
(10 to 13 mΩ)
2012/0805
0.7 to 0.9 3.2 to 3.8 1.1 to 1.4
ERJ6CW
(15 to 30 mΩ)
2012/0805
0.9 to 1.1 3.2 to 3.8 1.1 to 1.4
ERJ8BW
3216/1206
1.2 4.4 to 5.0 1.3 to 1.8
ERJ8CW
(10 to 16 mΩ)
ERJ8CW
(18 to 50 mΩ)
3216/1206
2.0 to 2.6 4.4 to 5.0 1.2 to 1.8
High power (double-sided resistive elements structure) type
(1) Anti-Sulfurated High Power Chip Resistors /
Wide Terminal Type
(2) Low TCR High Power Chip Resistors /
Wide Terminal Type
Aug. 201809
Panasonic I :???? g” % QB? i WEDGE [?DDDDDD? f WUDDDDEDD chLLJ HH MUM? mm :m FT WEI fl gggggii gggg Ma Wig 71L L—4 Gamma flauflflmm flfifl: TJDDDDDDD
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Surface Mount Resistors Land Pattern
– 63 –
a
d
cb
Conductor
Solder resist
fa
b
P
c
b bdddddddcccccc
af
fa
bdb
ccdd
0.8
0.4 to 0.5
3.3 to 3.4
5.0 to 5.4
0.35 to 0.4
1.4 to 1.5
3.1 to 3.5
2.1 to 2.5
4.3 to 4.7
1.27 0.4 to 0.6
4.4
2.2
0.2
0.4 to 0.5
1.27
4.4
2.2
0.2
1.27
EXBA10P EXBA10E
1.27 0.635 1.27 0.635
0.4 to 0.5
3.4
1.4
5.2
3.3
0.5
0.8 0.4 0.35 to 0.4
0.1 to 0.15
0.635
0.9 to 1.1